Inserting Forms into iWeb

Is there a way of inserting fill-in forms eg application forms into iWeb ?
Or, can someone give me a solution for producing an application form, apart from having a pdf form to download ?
Thanks
Anton

Yes. There are a couple of ways. 1 - use a 3rd party site like Wufoo to create the form and embed it into your iWeb page using the code from Wufoo and an HTML snippet. 2 - use Form Action code.
The following demo page shows each method and the code used: Embedding Forms & Encoding Email Addresses.
OT

Similar Messages

Embedding a google form into iWeb.

I am trying to embed a google form into iWeb and the full form does not show up. I used the HTML widget and copied and pasted the google link.
Thoughts?

Hi Ralph,
We can use fragments for such requirements but at the end when you add a fragment only the xfo is copied not the data.
so ideally this is not possible in Adobe forms atleast for now. so we need to have links to launch the child form.
Cheers,
Sai

Embedding web forms into iweb pages.

I need for someone to answer the question on whether you can embed opt-in webforms into iweb pages and if so how do you get the code into the iweb code so it shows up on the page. Im using Aweber and need to put their opt-in form on my iweb page.
imac G5 Mac OS X (10.4.9)

http://www.varkgirl.com/Varkgirl/Basic%20HTML%20Additions.html

Inserting Pics into iWeb

I have been assembling some portions of our bogl but am concerned about file sizes. We have a Nikon d70 and which has pretty large files when in fine mode. I pull them into iWeb from iPhoto with no postprocessing for size/res. It puts relatively small thumbnails but the slideshow files are pretty big (110-120kb).
Do most people post process before inserting? I thought iWeb pretty much did all that for you to a set standard or does it base it on a percentage size reduction?
Thanks
IMAC EyeSight - 15" Powerbook g4 Mac OS X (10.4.5)

I have exactly the same problem - and I am on broadband although a fairly slow broadband. I have taken to reducing all my pictures to be posted to Jpegs. Or at least with me it would be only some - about 25% that would be pixellated. I never thought of asking someone with a higher broadband to test to see if OK for her/him.
Hi - I have a related question. I'm just creating my
first ever web site - it's only fairly simple for a
small charity association - and using iWeb has been
great for this because of its intuivity - is this a
real word?
But the only problem is that now the site is at last
'up there' when I check out the the Photo pages
neither the thumbnail pics or their fill size
versions appear correctly - highly pixellated and
unrecognisable. In fact they look as if they were
imported at very very low res but in reality it's
quite the opposite and I was actually worried that
they could be too high res.
I am not on Broadband, just a slow dial-up connectin
- yet a friend with broadbad has just check my site
and they come out great for him. Any ideas? Is it
just that I am not on a higher speed connection? If
so this will be a problem because many visitors to
the site will be overseas with a slow connection
also. I'm happy to re-configure my Photos pages with
smaller images but could do with advice as to what
would be the best image size and resolution to ensure
success. Hope someone can help. Thanks.
PowerBook G4 Mac OS X (10.4.6)
Powerbook 17" Mac OS X (10.4.7)

Need Help inserting metatags into IWEB website.

How do I insert HTML metatag code (description and keywords) into my IWEB website hosted by GoDaddy?

As far as SEO is concerned, the title tag is the most important. The meta tag, or keywword tag, is not given much importance by Google anymore due to overuse and abuse but may be worth including for other search engines.
The title tag can be added in iWeb but, since it is mostly useless without a meta description, its better to use the freeware iWeb SEO Tool to add this stuff...
http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html
SEO Tool was updated recently. Get the latest version HERE.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Inserting script into iWeb

Anyone know how I can insert a javascript command into my iWeb page? My teamspeak provider gives me a script,but I'm not sure how to insert it.

So it sounds like this code snippet will display something on the page. In that case, you will need to follow the "standard" steps to add external HTML code into your page. Here is a thread where I have gone through the process in steps. The thread is actually about adding an ad banner, but the steps and principles are the same: Reserve space on the page in iWeb, then find the space in the published HTML file and replace it with your code. Here's the link....
http://discussions.apple.com/thread.jspa?messageID=2446855&#2446855
If you have any questions, please don't hesitate to post them here. Good luck!

APEX4-How can I see the insert sql apex is creating to insert form into db?

Hi,
I've a table with around 78 columns and a form to submit the values. Till around 68 columns it was working fine, when I added another 10 fields and modified names of few other, on clicking Create or Apply it throws duplicate column name error. I've given the exact error below.
How can I find out which is the duplicate column? or where the problem lies? The form is quite big and complex so I don't want to recreate it.
Is it possible for me to see the sql apex is generating to insert or update the value?
When I try to create a new entry, application throws this error:
ORA-06550: line 1, column 79: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
On editing an existing entry, application throws error:
ORA-20505: Error in DML: p_rowid=181, p_alt_rowid=RT_ID, p_rowid2=, p_alt_rowid2=. ORA-00957: duplicate column name
Thanks for you time.
Thanks,
Hozy

Fixed, I was referring to same column name twice.

Help with jquery code into iweb

Hello,
I am new to inserting code into iweb and was wondering if it was possible to use code such as the jquery plugins into an iweb html snippet? i would like to create a simple image gallery such as the following link:
http://malsup.com/jquery/cycle/lite/
interested in the click transitions (fade in out), but instead of using the prev / next as the click triggers if it was possible to use "+" and signs
i appreciate any help you guys may provide,
grodr

Yes, you can use JavaScript in the HTML Snippet. But it requires knowledge of HTML/CSS/JavaScript and how iWeb works.
Anything you paste in the HTML Snippet is your responsibility. iWeb does not care whether it works or not. It happily publishes the stuff you paste.
Read this article : [Using the iWeb HTML Snippet|http://www.wyodor.net/blog/archives/2009/07/entry_213.html]
Follow the link in the article and read this sentence very very carefully:
*Publish the page on the server and test it. Make sure it works. And test it again. And again. And again. No excuse.*
And this : [How to display a remote picture in your iWeb page|http://www.wyodor.net/Tutorials/ImageWidget/ImageWidget.html]
This pages uses it in the two slideshows :
http://www.wyodor.net/_Demo/MyHouse/Huis.html
And here it is explained how to create such slideshow :
http://www.wyodor.net/iWebBlogTest/Wyodor_1/WebBanner.html
And this topic :
http://discussions.apple.com/thread.jspa?threadID=2351764&tstart=0

Inserting a Form Created in CoffeeCup Form Designer into iWeb...

Hi all,
I created a web form in CoffeeCup's Flash Form creator (on my PC). The end result is 7 files and a section of code. I presume that I can insert the code as a snippet (I have version '08) but I'm unsure as to where to put the 7 associated files. In addition, this site is hosted on Go Daddy, not .Mac. Any tips on where/how in the folder architecture on my Mac to place the 7 files generated by CoffeeCup and does anyone know if there's anything funky I need to do to post this all to Go Daddy... Thanks in advance for any advice...

Yes, you can enter the Html code as a snippet, however, as far as I know you have wasted your time creating 7 pages with coffee cup as you will not be able to merge them into iWeb. Others have asked this same question and I don't think it is possible to merge web sites or pages created with other web site packages such as Dreamweaver into iWeb. You can't import in that way.
You will either need to use iWeb or coffee cup, but not both.
Use an ftp client to upload to GoDaddy. There are many - Fetch, Cyberduck or Transmit. You can do this in iWeb too.

Inserting Fillable forms into PDFs converted from word

I need some help with inserting a fillable form I created in Live Cycle. When I go to insert the form into a file that was originally created in word and saved as a PDF,I receive a message (see below)
I need to be able to find a way to insert the fillable form to the end of a regular PDF, without losing the capabilities of the form, including a submit by email button, which I tried both as the Email submit button and the regular button, formatted to submit a email in response.
I don't know if there is some settings or preferences that I can change to be able to insert the form, but I need it to be one document.I know that this is not impossible, as I have seen other documents in this formatting, I just cant seem to be able to get it.

I need some help with inserting a fillable form I created in Live Cycle. When I go to insert the form into a file that was originally created in word and saved as a PDF,I receive a message (see below)
I need to be able to find a way to insert the fillable form to the end of a regular PDF, without losing the capabilities of the form, including a submit by email button, which I tried both as the Email submit button and the regular button, formatted to submit a email in response.
I don't know if there is some settings or preferences that I can change to be able to insert the form, but I need it to be one document.I know that this is not impossible, as I have seen other documents in this formatting, I just cant seem to be able to get it.

How come I can't see my web gallery to insert into iWeb?

G'day people
I have several web galleries and want to insert them into a web page I'm creating with iWeb '08.
However, when I go to "Insert -> .Mac Web Gallery" it tells me that there are none! I have a .Mac account which is set-up and accessible without any problem when I'm iPhoto. The .Mac account I am using in iWeb is the same as the .Mac account in iPhoto so I can't figure this one out.
Any idea?
Cheers
Al

The reason they don't appear is because the galleries are password protected.It's not a bug, it's a feature!

Inserting MobileMe Videos into IWeb

I have three questions about inserting MobileMe Videos into iweb.
1) I used the "insert from MobileMe" command in iWeb and it allows me to insert a video but I can't change the size of the video. Do you know how I can change the size.
2) I have some movies I have uploaded to the gallery via iMovie and some I uploaded via the mobileme site. The ones via iMovie I can easily insert like I mentioned in Q1 but the others I uploaded are put into an album and iWeb doesn't allow me to select the video I want to insert. It only allows me to insert the whole album which is a small box with links to the album. I want to choose the video to insert into the page. Any ideas How?
3) Is there a way to insert the video from mobileme using the Html Snippet? If so, how?
Thanks
Neil

3) Is there a way to insert the video from mobileme using the Html Snippet? If so, how?
You can use the [OBJECT/EMBED|http://htmlhelp.com/reference/html40/special/object.html] code for inserting media in a page.
When you know the location of the movie you can create a path to it.
Your webgallery is in iDisk>Web>Sites>_gallery>100999>Movie.
[Here's a post that might be helpful.|http://discussions.apple.com/thread.jspa?messageID=7735467&#7735467]
And here you find sample code you may need:
http://www.wyodor.net/MoreEmbed/
+Page is a new design to display all media types in one section.+
And still more here: http://www.wyodor.net/iFrame/

Inserting images into form.

Hi, i am new to midlet programming.
Can anybody help me in inserting images into forms.
And how do we set a thumbnail view in a form.
Thanks.

Hello,
use
Image tmp = Image.CreateImage ("/com/...../t.jpg");
Form f = new Form ("title here");
f.append (tmp);
//if u want to insert it after loading the form use
f.insert (index,tmp);
Good Luck,
Rawad

Insert data into oracle database using a PHP form

I'm trying to enter data into my oracle database table using a php form. When I click submit no data is added. Could someone help me please. I'm new to php/oracle thing.
NOTE: I don't have any problem connecting to the database using php.
Here is the code I'm using:
<?php
// just print form asking for name if none was entered
if( !isset($query)) {
echo "<form action=\"$uri\" method=post>\n";
echo "<p>Enter Name: ";
echo "<input type=text size=100 maxlength=200 name=data value=\"$data\">\n";
echo "<br><input type=submit name=submit value=Submit>\n";
echo "</form>\n";
exit;
// insert client's name
$query = "INSERT INTO client (name) VALUES ($data)";
// connect to Oracle
$username = "xxxx";
$paswd = "yyyyyy";
$dbstring = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)".
"(HOST=patriot.gmu.edu)(PORT=1521))".
"(CONNECT_DATA=(SID=COSC)))";
$db_conn = ocilogon($username, $paswd, $dbstring);
$stmt = OCIParse($db_conn, $query);
OCIExecute($stmt, OCI_DEFAULT);
OCIFreeStatement($stmt);
OCILogoff($db_conn);
?>
Thanks for your help. I will also appreciate a better was to do it.
Tony

resumption and jer,
Sorry I cannot format the code for easy reading!
The page is submitting to itself. See action = \"$uri\". I used the same logic to enter SELECT querries into the database. It pulls and displays data back on the webpage. The code I used for this is below. Compare it with the one above for inserting data into the table.
<?php
// connect to oracle
$username = "xxxxx";
     $paswd = "yyyyy";
     $dbstring = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)".
          "(HOST=patriot.gmu.edu)(PORT=1521))".
          "(CONNECT_DATA=(SID=COSC)))";
     $db_conn = ocilogon($username, $paswd, $dbstring);
// username and password will be unset if they weren't passed,
// or if they were wrong
if( !isset($query)) {
// just print form asking for account details
echo "<form action=\"$uri\" method=post>\n";
echo "<p>Enter Query: ";
echo "<input type=text size=100 maxlength=200 name=query value=\"$query\">\n";
echo "<br><input type=submit name=submit value=Submit>\n";
echo "</form>\n";
exit;
// remove unwanted slashes from the query
$query = stripslashes($query);
// run the query
$stmt = OCIParse($db_conn, $query);
OCIExecute($stmt, OCI_DEFAULT);
// Open the HTML table.
print '<table border="1" cellspacing="0" cellpadding="3">';
// Read fetched headers.
print '<tr>';
for ($i = 1;$i <= ocinumcols($stmt);$i++)
print '<td class="e">'.ocicolumnname($stmt,$i).'</td>';
print '</tr>';
// Read fetched data.
while (ocifetch($stmt))
// Print open and close HTML row tags and columns data.
print '<tr>';
for ($i = 1;$i <= ocinumcols($stmt);$i++)
print '<td class="v">'.ociresult($stmt,$i).'</td>';
print '</tr>';
// Close the HTML table.
print '</table>';
OCIFreeStatement($stmt);
OCILogoff($db_conn);
?>

Is it possible to insert hyperlinks into Dev Forms Code?

Does anyone know of a way to insert hyperlinks into forms once
it's deployed? For example, if I want the user to click on a
button "when-button-pressed" code that will take them to a
website.
thanks
null

Ares (guest) wrote:
: Does anyone know of a way to insert hyperlinks into forms once
: it's deployed? For example, if I want the user to click on a
: button "when-button-pressed" code that will take them to a
: website.
: thanks
Why don't you use WEB.SHOW_DOCUMENT inside your "when-button-
pressed" trigger?
Yar
null

Inserting Forms into iWeb

Similar Messages

Maybe you are looking for