Inserting into two tables using JDBC Receiver Adapter

I've defined following type for Receiver JDBC to save data in two different tables
Name          Category     Type          Occurrence
ReceiverDB_DT     Complex Type
STATEMENT     Element                    1..unbounded
TABLE_NAME     Element                    1
ACTION          Attribute     xsd:string     required
TABLE          Element          xsd:string     1
ACCESS          Element          Table1_DT     1
STATEMENT2     Element                    1..unbounded
TABLE_NAME     Element                    1
ACTION          Attribute     xsd:string     required
TABLE          Element          xsd:string     1
ACCESS          Element          Table2_DT     1
When I send data of two tables, it is showing data for both the two tables in MONI of PI System, but ultimately it shows only one table's data in message monitoring payload.
what could be the problem?
Thanks,
-Haresh

It solved!!!
by just changing Occurrence only as rightly pointed by Ankesh
Name          Category     Type          Occurrence
ReceiverDB_DT     Complex Type
STATEMENT     Element                    1..unbounded
TABLE_NAME     Element                    1
ACTION          Attribute     xsd:string     required
TABLE          Element          xsd:string     1
ACCESS          Element          Table1_DT     1
STATEMENT2     Element                    1..unbounded
TABLE_NAME     Element                    1
ACTION          Attribute     xsd:string     required
TABLE          Element          xsd:string     1
ACCESS          Element          Table2_DT     1
Name          Category     Type          Occurrence
ReceiverDB_DT     Complex Type
STATEMENT     Element                    1
TABLE_NAME     Element                    1
ACTION          Attribute     xsd:string     required
TABLE          Element          xsd:string     1
ACCESS          Element          Table1_DT     1..unbounded
STATEMENT2     Element                    1
TABLE_NAME     Element                    1
ACTION          Attribute     xsd:string     required
TABLE          Element          xsd:string     1
ACCESS          Element          Table2_DT     1..unbounded
Thanks a lot ankesh

Similar Messages

How to insert into two tables using a Single ADF creation form?

Hi,
I need to make a ADF Creation Form that will insert the data at same time in two tables... Like i have two tables Track (Track_id,Track_Name)
and Module ( Module_id, Track_id, Module_name, Module_Short_name) and i have to insert the data in both the tables using Same Creation Form.
can anybody help me out and gave me the solution,how to do that?
Thanks

if you want to insert different data into two different tables then you can drag the two data objects into creation form..
If you want to duplicate the data inserted in the one table to another then you can follow two approach
1. Drag and drop one table, When Save button is invoked then insert data into another table using callable statement.
or
2. Create on-insert trigger in Table1 where you can insert data into table2.
--Prasanna

How to Insert all Records together using JDBC Receiver Adapter.

Hi,
Suppose, I have to send 5 records and from R/3
(using client Proxy) using XI and insert/update all these records in a database.
In case I want to update all the 5 records else mark it as fail and return the response synchronously to R/3, what should be my approach?
Can we do it using native sql querries, if yes could you plese tell me how to do so.
I have never used native sql queries.
Thanks in advance.
Regards
Pushkar

hi,
>>>>Can we do it using native sql querries, if yes could you plese tell me how to do so.
why don't use use standard jdbc adapter and standard jdbc document formats?
the sync jdbc call will return the number of affected /deleted rows
Regards,
michal

How many messsages can we insert using JDBC receiver adapter in to DB

Hi Friends,
We are having 30 JDBC receiver interfaces in my current implementation project; load of JDBC receiver interfaces was 50 k messages per day and Performing only INSERT operation on data base.
We have created individual communication channel for every JDBC receiver interface and max concurrency value set in CC was 5.
Now we are testing all interfaces in quality with all possible cases, but we found that JDBC receiver adapter unable to process 50 k messages per day, we are on PI 7.1 EHP1 SP7.
Please share your experiences with JDBC adapter receiver like per day how many messages we can transfer.
Thanks a Ton,
Raj

Raja Sekhar Reddy T wrote:
we are processing 50 k individual messages.
>
> I have increased max threads for JDBC receiver to 20 but no luck same rate only . My questions here is how many messages we can trasfer using JDBC receiver adapter?
>
> Regards,
> Raj
Hi raj,
I have seen some interfaces that deal with upload of 5000 rows at a rime.. I don't there will be a restriction in the no of messages that can be transferred using the JDBC adapter as such unless until the requirement is so para-normal and in your case it is not
Kind regards
XA

Error while updating database using jdbc receiver adapter

Hi All,
I am trying to update a single record using jdbc receiver adapter.
This is my the message that is getting created..
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Data xmlns:ns0="urn:Test">
- <STATEMENT>
- <TABLENAME ACTION="UPDATE_INSERT">
<TABLE>ORDERS</TABLE>
- <ACCESS>
<OrderID>99999</OrderID>
<CustomerID>VICTE</CustomerID>
<EmployeeID>3</EmployeeID>
<ShipAddress>VICTE</ShipAddress>
</ACCESS>
- <KEY>
<OrderID compareOperation="EQ">99999</OrderID>
<ShipAddress compareOperation="EQ">VICTE</ShipAddress>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:Data>
But in Adapter Monitoring i am getting the following error..
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ORDERS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 'VICTE'.</i>
Regards,
Rahul

Rahul,
> In this case i believe the interface has to be synch.
> So what will the response message type be like..
Not necessary. UPDATE can be asynch as well.
Can you turn the trace on like pointed by Michal and then you can see the Query in the Audit Log of the adapter montioring. Try to execute the same query from your DB Client like TOAD and see what is the Syntax error you are getiing.!
The problem looks like some field has some dataype / column name mismatch.
Regards
Bhavesh

Insert into two tables, how to insert multiple slave records

Hi, I have a problem with insert into two tables wizard.
The wizard works fine and I can add my records, but I need to enter multiple slave table records.
My database:
table: paper
`id_paper` INTEGER(11) NOT NULL AUTO_INCREMENT,
`make` VARCHAR(20) COLLATE utf8_general_ci NOT NULL DEFAULT '',
`model` VARCHAR(20) COLLATE utf8_general_ci NOT NULL DEFAULT '',
`gsm` INTEGER(11) NOT NULL,
PRIMARY KEY (`id_paper`)
table: paper_data
`id_paper_data` INTEGER(11) NOT NULL AUTO_INCREMENT,
`id_paper` INTEGER(11) NOT NULL,
`value` DOUBLE(15,3) NOT NULL,
`nanometer` INTEGER(11) NOT NULL,
PRIMARY KEY (`id_paper_data`)
I need to add multiple fields "value" and "nanometer"
Current form looks like this:
Make:
Model:
Gsm:
Value:
nanometer:
I need it to look like this:
Make:
Model:
Gsm:
Value:
nanometer:
Value:
nanometer:
Value:
nanometer:
Value:
nanometer:
and so on.
The field "id_paper" in table paper_data needs to get same id for entire transaction. Also how do I set default values for each field "nanometer" on my form the must be different (370,380,390 etc)?
Thanks.

you can find an answer here: http://209.85.129.132/search?q=cache:PzQj57dsWmQJ:www.experts-exchange.com/Web_Development /Software/Macromedia_Dreamweaver/Q_23713792.html+Insert+Into+Two+Tables+Wizard&cd=3&hl=lt& ct=clnk&gl=lt
This is a copy of the post:
Hi experts,
Im using ADDT to design a page that needs to insert one record into a master ALBUMS table, along with three records into a GENRES table, all linked by the primary, auto-incremented ALBUMS. ALBUM_ID.
Ive tried many different ways of combining the Insert into Multiple Tables wizard and the insert record wizard with Link Transactions, all with no luck. Either only the album info gets inserted, or a ALBUM_ID cannot be null error from MySQL. Here is the structure of the tables
ALBUMS
ALBUM_ID, INT(11), Primary, Auto_Increment
alb_name, varchar
alb_release, YEAR
USER_ID, int
alb_image, varchar
GENRES
ALBUM_ID, int, NOT NULL
GENRE_ID, int, NOT NULL
ID, int, primary, auto-increment
Many thanks in advance...
==========================================================================================
//remove this line if you want to edit the code by hand
function Trigger_LinkTransactions(&$tNG) {
global $ins_genres;
$linkObj = new tNG_LinkedTrans($tNG, $ins_genres);
$linkObj->setLink("ALBUM_ID");
return $linkObj->Execute();
function Trigger_LinkTransactions2(&$tNG) {
global $ins_genres2;
$linkObj = new tNG_LinkedTrans($tNG, $ins_genres2);
$linkObj->setLink("ALBUM_ID");
return $linkObj->Execute();
function Trigger_LinkTransactions3(&$tNG) {
global $ins_genres3;
$linkObj = new tNG_LinkedTrans($tNG, $ins_genres3);
$linkObj->setLink("ALBUM_ID");
return $linkObj->Execute();
//end Trigger_LinkTransactions trigger
//-----------------------Different Section---------------------//
// Make an insert transaction instance
//Add Record Genre 1
$ins_genres = new tNG_insert($conn_MySQL);
$tNGs->addTransaction($ins_genres);
$ins_genres->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
$ins_genres->registerTrigger("BEFORE", "Trigger_Default_FormValidation", 10, $detailValidation);
$ins_genres->setTable("genres");
$ins_genres->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID");
$ins_genres->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
$ins_genres->setPrimaryKey("ID", "NUMERIC_TYPE");
// Add Record Genre 2
$ins_genres2 = new tNG_insert($conn_MySQL);
$tNGs->addTransaction($ins_genres2);
$ins_genres2->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
$ins_genres2->setTable("genres");
$ins_genres2->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID2");
$ins_genres2->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
$ins_genres2->setPrimaryKey("ID", "NUMERIC_TYPE");
// Add Record Genre 3
$ins_genres3 = new tNG_insert($conn_MySQL);
$tNGs->addTransaction($ins_genres3);
$ins_genres3->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
$ins_genres3->setTable("genres");
$ins_genres3->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID3");
$ins_genres3->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
$ins_genres3->setPrimaryKey("ID", "NUMERIC_TYPE");
=========================================================================================
Hi Aaron,
Nice job!!
$ins_albums->registerTrigger("AFTER", "Trigger_LinkTransactions2", 98);
$ins_albums->registerTrigger("AFTER", "Trigger_LinkTransactions3", 98);
These lines, right? :-( Sorry I forgot to mention that
Thanks a lot for the grading!

Can select, but cannot insert into oracle tables using php.

I am having trouble inserting data into a tables in oracle using PHP. I can insert into the tables using baninst1, but nothing else. I can't even insert using the tables' owner. Every time I try I get the ORA-00492 error of table or view does not exist. However, I can run a select statement just fine. So far, baninst1 is the only user that can actually do inserts. I've triple checked all the table grants and everything is fine. Also, I can copy/paste the exact insert statement into SQL*Plus and it works with the correct user. It doesn't have to be baninst1. I've tried everything I can think of. I've tried putting the table name in quotes, adding the schema name to the table, checking public synonyms, but everything appears to be ok. I would greatly appreciate any suggestions others may have.
I'm using PHP 5.2.3 with an oracle 9i DB.

Here is the code that doesn't work. It works only with baninst1, no other username will work and all I do is change the my_username/my_password to something different. This is one example function where I try to do an insert, but it doesn't work on any of the tables I try.
Thanks for looking.
class Oracle {
     private $oracleUser = "my_username";
     private $oraclePassword = "my_password";
     private $oracleDB = "MY_DB";
     private $c = null;
     function Connect() {
          if ( !($this->c = ocilogon( $this->oracleUser, $this->oraclePassword, $this->oracleDB ) ) )
               return false;
          return true;
     function AddNewTest($testName, $course, $section, $term, $maxAttempts, $length, $startDate, $startTime, $endDate, $endTime)
          $result = "";
          if( $this->c == null )
               $this->Connect();
          $splitIndex = strpos($course, " ");
          $subjectCode = substr($course, 0, $splitIndex);
          $courseNumber = substr($course, $splitIndex + 1);
          $insertStatment = "insert into szbtestinfo(szbtestinfo_test_name,
                                                            szbtestinfo_course_numb,
                                                       szbtestinfo_section,
                                                            szbtestinfo_max_attempts,
                                                            szbtestinfo_length_minutes,
                                                            szbtestinfo_start,
                                                            szbtestinfo_end,
                                                            szbtestinfo_id,
                                                            szbtestinfo_subj_code,
                                                            szbtestinfo_eff_term)
                                                            values( '" . $testName .
               "', '" . $courseNumber .
               "', '" . $section .
               "', " . $maxAttempts .
               ", " . $length .
               ", to_date('" . $startDate . " " . $startTime . "', 'MM/DD/YYYY HH24:MI')" .
               ", to_date('" . $endDate . " " . $endTime . "', 'MM/DD/YYYY HH24:MI')" .
               ", szsnexttest.nextval" .
               ", '" . $subjectCode .
               "', '" . $term . "')";
          //return $insertStatment;
          $s = OCIParse($this->c, $insertStatment);
          try
               $result = OCIExecute($s);
          catch(exception $e)
          return $result;
     }

Executing Select query using JDBC Receiver Adapter

I created couple types in Oracle and also new function instead of procedure
Can I execute the above query using JDBC Receiver Adapter.
select *
from the ( select cast( apr.get_distribut('', '', '', 'hdfcgd', 'CAN') as dsrTable )
         from dual );
If possible how my message structure should look like...

Hi vikram,
   If you use JDBC as Receiver Adapter you can only post the data to the data base I do no think so we can select the records from the data base.
   If you use JDBC as Sender hope,we can the select query in the sender communication channel.
    Hope I am clear.
Thanks and Regardds,
Chandu.

Inserting Multiple Rows into Database Table using JDBC Adapter - Efficiency

I need to insert multiple rows into a database table using the JDBC adapter (receiver).
I understand the traditional way of repeating the statement multiple times, each having its <access> element. However, I am just wondering whether this might be performance-inefficient, as it might insert records one by one.
Is there a way to ensure that the records are inserted into the table as a block, rather than record-by-record?

Hi Bhavesh/Kanwaljit,
If we have multiple ACCESS tags then what happens is that the connection to the database is made only once. But the data is inserted row by row.
Why i am saying this?
If we add the following in JDBC Adapter..logSQLStatement = true. Then incase of multiple inserts we can see that there are multiple
<i>Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','1000')
Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','2000')</i>
Doesnt this mean that rows are inserted one by one?
Correct me if i am wrong.
This does not mean that the transaction is not guaranted. Either all the rows will be inserted or rolled back.
Regards,
Sumit

Fetch data from one table and insert into two tables in desired format

I have similar to the following data in a table and it is not normalized. The groupID is being used to group two records of similar nature.
DECLARE @OldDoc TABLE (oldDocID INT, groupID INT, deptID INT)
INSERT INTO @OldDoc (oldDocID, groupID) VALUES (1, NULL, 111),(2,NULL,111),(3,1,111),(4,NULL,333),(5,1,222),(6,NULL,333),(7,2,222),(8,2,333),(9,NULL,111),(10,3,222),(11,NULL,333),(12,3,444)
I need to process the data from the above table (@OldDoc) and write into two new tables (@NewDoc and @NewDocGroup) as follows.
oldDocID should be stored as newDocID when inserting to @NewDoc table. Only records with groupID NULL and one record (first one) per group should be considered (For example, oldDocID 5 is not considered as 3 and 5 belong to the same groupID 1) for insertion.
DECLARE @NewDoc TABLE (newDocID INT)
INSERT INTO @NewDoc (newDocID) VALUES (1),(2),(3),(4),(6),(7),(9),(10),(11)
All records from @OldDoc should be considered for insertion into @NewDocGroup table. OldDocID is inserted as NewDocID and deptID is as-is. Instead of groupID, the ID of the first record in the
group should be considered as parentNewDocID (For example, 3 is considered as parentNewDocID for newDocID 5 as 3 and 5 belong to the same groupID in @OldDoc table) for the newDocID.
DECLARE @NewDocGroup (newDocID INT, parentNewDocID INT, deptID INT)
INSERT INTO @NewDocGroup (newDocID, parentNewDocID, deptID) VALUES (1,1,111),(2,2,111),(3,3,111),(4,4,333),(5,3,222),(6,6,333),(7,7,222),(8,7,333),(9,9,111),(10,10,222),(11,11,333),(12,10,444)
How do I accomplish the above using SQL ? Thanks for the help.

>> I have similar to the following data in a table and it is not normalized. The group_id is being used to group two records [sic] of similar nature. <<
Rows are not records. Tables have to have a key by definition. You do not do math with identifiers, so they should not be numeric. Let's ignore that error for now. In short, you are posting garbage. If you had followed Forum Netiquette, would you have posted
this?
CREATE TABLE Old_Documents
(old_doc_id INTEGER NOT NULL PRIMARY KEY,
group_id INTEGER,
dept_nbr INTEGER NOT NULL
REFERENCES Departments (dept_nbr));
INSERT INTO Old_Documents(old_doc_id, group_id, dept_nbr)
VALUES (1, NULL, 111),
(2, NULL, 111),
(3, 1, 111),
(4, NULL, 333),
(5, 1, 222),
(6, NULL, 333),
(7, 2, 222),
(8, 2, 333),
(9, NULL, 111),
(10, 3, 222),
(11, NULL, 333),
(12, 3, 444);
>> I need to process the data from the above table (Old_Documents) and write into two new tables (New_Documents and New_Documents_Groups) as follows. <<
Just like punch cards and mag tape data processing! Being old and being new are a status, not another kind of entity. But that is how mag tapes work. And you even use the verb "fetch" from tape files. This design flaw is called attribute splitting.
Do you have a Male_Personnel and Female_Personnel table? NO! It is just Personnel!
>> old_doc_id should be stored as new_doc_id when inserting to New_Documents table. Only records [sic] with group_id NULL and one record [sic] (first [sic; no ordering in a table] one) per group should be considered (For example, old_doc_id 5 is not considered
as 3 and 5 belong to the same group_id =1) for insertion. <<
Think about your punch card mindset. Why did you physically materialize that redundant New_Documents table? Let me answer that: this is how you work with punch cards! In SQL we use a VIEW:
CREATE VIEW New_Documents (new_doc_id)
AS
SELECT old_doc_id
FROM Old_Documents;
>> All records [sic] from Old_Documents should be considered for insertion into New_Documents_Groups table. The old_doc_id is inserted as new_doc_id and dept_nbr is as-is. Instead of group_id, the ID [sic: which identifier??] of the first [sic: tables
have no ordering like a deck of punch cards] record [sic] in the group should be considered as parent_new_doc_id (For example, 3 is considered as parent_new_doc_id for new_doc_id 5 as 3 and 5 belong to the same group_id in Old_Documents table) for the new_doc_id.
<<
Why not use 5 as the parent? My guess is that you are trying to form equivalence classes. See:
https://www.simple-talk.com/content/print.aspx?article=2020
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Insert into two tables

I want to input a set of data into form text fields then
insert that data into a table plus insert one of those fields into
another table when the form button is clicked.
I've played around with Recordsets etc but I can't work out
how to define a server behaviour which will enable me to do what I
want. I'm using DWMX 2004 by the way.
Probably simple but I'm new to this and can't find an
explanation anywhere in the help files. Perhaps one of the resident
gurus could offer me some advice?
TIA, Ken

quote:
Originally posted by:
Newsgroup User
old-celt wrote:
> I want to input a set of data into form text fields then
insert that data into
> a table plus insert one of those fields into another
table when the form button
> is clicked.
You can't insert data into two tables in a single operation.
It requires
two insert record queries to be run in succession.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Can I make the two insert queries run from a single form
button press? Shoould I have a recordset or write two separate
queries, one for each table?

Insert into two tables with a single query (same ID)

Hello,
I want to insert two tables at the same time ( with a single query) provided that both records get inserted with the same id. How do I do this?
Table Movies
id
name
Table Category
movie_id
cat_typea) Insert into first table, retrieve the id (may be by using my_sequence.currval and then insert into another table.
issue: Makes three query to the db, I am also guessing that when multiple people try to insert there will be an issue, I might be wrong.
I don't have any other idea.
Greatly appreciated!

Why don't use multitable insert ? It's available from 9i.
A sequence.nextval will return the same value within the whole instruction
so all records can be inserted with the same id.
Look at this example:
DROP TABLE A;
DROP TABLE B;
drop sequence a_seq;
CREATE TABLE A(
ID NUMBER,
FIRSTNAME VARCHAR2(50)
CREATE TABLE B AS
SELECT id, firstname lastname FROM a;
CREATE SEQUENCE a_seq
START WITH 1;
INSERT ALL
INTO A(ID, FIRSTNAME) VALUES(A_SEQ.NEXTVAL, FNAME)
INTO B(ID, LASTNAME) VALUES(A_SEQ.NEXTVAL, LNAME)
SELECT 'fname ' || LEVEL FNAME, 'lname ' || LEVEL LNAME
FROM DUAL
CONNECT BY LEVEL < 10
COMMIT;
SELECT * FROM A;
SELECT * FROM b;
DROP TABLE A succeeded.
DROP TABLE B succeeded.
drop sequence a_seq succeeded.
CREATE TABLE succeeded.
CREATE TABLE succeeded.
CREATE SEQUENCE succeeded.
18 rows inserted
commited
ID                     FIRSTNAME
3                      fname 1
4                      fname 2
5                      fname 3
6                      fname 4
7                      fname 5
8                      fname 6
9                      fname 7
10                     fname 8
11                     fname 9
9 rows selected
ID                     LASTNAME
3                      lname 1
4                      lname 2
5                      lname 3
6                      lname 4
7                      lname 5
8                      lname 6
9                      lname 7
10                     lname 8
11                     lname 9
9 rows selected

Insert to multiple table using single DB Adapter

Hi,
I m using Jdev 11g Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Can anyone tell me how can we do insert and update operations to mutliple tables using single DB adapter.
I want to do insert in 2 tables and update the third using same DB apater. Is it possible?If yes, how?

Hi,
You can write a PL\SQL (Stored Procedure) to do your operations and call the PL\SQL code from DB Adapter.
-Senaka

HOW TO READ DATA FROM A FILE AND INSERT INTO A TABLE USING UTL_FILE

Hi..
I have a file.I want to read the data from file and load it into a table using utl_file.
how can I do it?
Any reply apreciated...

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

Using ADF BC how to insert into two table ?

I'm working with ADF BC and JSP.
In my project, I have :
1- each COURSE have one SYLLABUS .
2- each SYLLABUS have one or many WEEK.
3- showCourses.jsp to show all courses and a button "create a new course" .
4- createCourse.jsp to create or update the course.
In "createCourse.jsp" , I want to fill all the data of COURSE , SYLLABUS and WEEK using the BC.
may you kindly help me !

No response ?!
I have put data control of the two tables : COURSE and SYLLABUS on createCourse.jsp as Input Form drag and drop. Because there are two forms , I have remove one of them and keep one with the Commit button.
Whene I Commit the form the course record that is created early in showCourse.jsp getting updat well .
The problem is :
there is no record in Sysllabus table to be update . So , How to create a record in Syllabus just when I create a record in Course ? And how to update it in the same form with course ?
my project is stoping here !
Are u hear me !

Inserting into two tables using JDBC Receiver Adapter

Similar Messages

Maybe you are looking for