Inserting or Importing

Hi Folks,
Can anybody tell me if I can insert an SWF flash file into
another Flash file. Using Flash ver 8
Thanks Sage

Okay CLBeech,
I have downlaoded and extracted and it works fine, I ran and
it loads correctly.
I also loaded both swf files separetely to see difference. I
looked at the fla file with Flash 8 and
you have two layes i hid both and could see any change on the
cancas; although the script is in the second layer
which looks similar to mine, except when I ran the wizard
yours was clean as a whistle and mine has a bunch of higlighted
yellow on some script code.
should I send file. here is the link:
http://www.loganglass.com/clbeech/rv_banner_01.zip

Similar Messages

  • ITunes, not iPod, crashes when certain CDs are inserted for importing...

    If a folder with the artist name exists already, import stops as soon as it starts, freezes iTunes (with the "time remaining" locked on 2:30 or whatever) >> AND << suspends my internet connection. Have to reboot whole system to begin again. This occurs when I delete or change name of artist folder, too.
    Any and all insights appreciated.

    Hi,
    Welcome to Apple Discussions
    You might want to post this question in the iTunes for Windows Forum for a better response.
    Regards,
    Colin R.

  • [Forum FAQ] How to use multiple field terminators in BULK INSERT or BCP command line

    Introduction
    Some people want to know if we can have multiple field terminators in BULK INSERT or BCP commands, and how to implement multiple field terminators in BULK INSERT or BCP commands.
    Solution
    For character data fields, optional terminating characters allow you to mark the end of each field in a data file with a field terminator, as well as the end of each row with a row terminator. If a terminator character occurs within the data, it is interpreted
    as a terminator, not as data, and the data after that character is interpreted and belongs to the next field or record. I have done a test, if you use BULK INSERT or BCP commands and set the multiple field terminators, you can refer to the following command.
    In Windows command line,
    bcp <Databasename.schema.tablename> out “<path>” –c –t –r –T
    For example, you can export data from the Department table with bcp command and use the comma and colon (,:) as one field terminator.
    bcp AdventureWorks.HumanResources.Department out C:\myDepartment.txt -c -t ,: -r \n –T
    The txt file as follows:
    However, if you want to bcp by using multiple field terminators the same as the following command, which will still use the last terminator defined by default.
    bcp AdventureWorks.HumanResources.Department in C:\myDepartment.txt -c -t , -r \n -t: –T
    The txt file as follows:
    When multiple field terminators means multiple fields, you use the below comma separated format,
    column1,,column2,,,column3
    In this occasion, you only separate 3 fields (column1, column2 and column3). In fact, after testing, there will be 6 fields here. That is the significance of a field terminator (comma in this case).
    Meanwhile, using BULK INSERT to import the data of the data file into the SQL table, if you specify terminator for BULK import, you can only set multiple characters as one terminator in the BULK INSERT statement.
    USE <testdatabase>;
    GO
    BULK INSERT <your table> FROM ‘<Path>’
     WITH (
    DATAFILETYPE = ' char/native/ widechar /widenative',
     FIELDTERMINATOR = ' field_terminator',
    For example, using BULK INSERT to import the data of C:\myDepartment.txt data file into the DepartmentTest table, the field terminator (,:) must be declared in the statement.
    In SQL Server Management Studio Query Editor:
    BULK INSERT AdventureWorks.HumanResources.DepartmentTest FROM ‘C:\myDepartment.txt’
     WITH (
    DATAFILETYPE = ‘char',
    FIELDTERMINATOR = ‘,:’,
    The new table contains like as follows:  
    We could not declare multiple field terminators (, and :) in the Query statement,  as the following format, a duplicate error will occur.
    In SQL Server Management Studio Query Editor:
    BULK INSERT AdventureWorks.HumanResources.DepartmentTest FROM ‘C:\myDepartment.txt’
     WITH (
    DATAFILETYPE = ‘char',
    FIELDTERMINATOR = ‘,’,
    FIELDTERMINATOR = ‘:’
    However, if you want to use a data file with fewer or more fields, we can implement via setting extra field length to 0 for fewer fields or omitting or skipping more fields during the bulk copy procedure.  
    More Information
    For more information about filed terminators, you can review the following article.
    http://technet.microsoft.com/en-us/library/aa196735(v=sql.80).aspx
    http://social.technet.microsoft.com/Forums/en-US/d2fa4b1e-3bd4-4379-bc30-389202a99ae2/multiple-field-terminators-in-bulk-insert-or-bcp?forum=sqlgetsta
    http://technet.microsoft.com/en-us/library/ms191485.aspx
    http://technet.microsoft.com/en-us/library/aa173858(v=sql.80).aspx
    http://technet.microsoft.com/en-us/library/aa173842(v=sql.80).aspx
    Applies to
    SQL Server 2012
    SQL Server 2008R2
    SQL Server 2005
    SQL Server 2000
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Thanks,
    Is this a supported scenario, or does it use unsupported features?
    For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
    in a supported way?
    Thanks! Josh

  • How do I insert multiple pages in a specific order?

    I create reports in Word and convert them to Adobe before sending them out to customers. I often need to insert additional (Adobe) pages into the report before sending it out; sometimes I need to insert mulitple (20 or 30) pages. Does anyone know how I can insert these pages in a specific order? A few times in the past, Adobe gave me the option to select the order, but lately that option has not come up. HELP!

    Hello Try67,
    I go to Document>Insert Pages then select the files I need to insert. The order in which the pages are inserted is important because they are results of pressure tests (e.g. Sample 1 thru sample 10). I just ran a trial; I tried to select them from top to bottom and bottom to top and it did not seem to make a difference...they went into the document in reverse order. As I mentioned earlier I used to get a pop-up screen that would ask what order I wanted the inserted pages in...I don't get that pop-up anymore.

  • Error messages during XML import of Project Pro 2010 files

    Hi folks,
    I'm trying to diagnose a couple of sick Project Pro 2010 files loaded from Project Server by saving them locally as XML files and then reimporting (not connected to the server during import).  The anomalous behavior exhibited by both files
    is that one takes 15 minutes to load from the server, while another takes over 20 minutes. These are not typical load times for this server.  In both cases, Project consumes about 25% of the CPU during the load process. There's little network I/O
    while this goes on, and when externally linked schedules are loaded to the cache, they load very quickly.  Other than the long load times, the schedules appear to be behave normally, except for some very odd print preview behaviors in one of the schedules
    that I asked about in a different thread (among other things, the default print preview start date is 17 years after the default finish date, and the finish date is about 11 years before the schedule actually starts).
    The questions I'm asking here are about errors I see when I try to import the files exported as XML, and whether they might provide any clues as to what's causing the load time issues.
    When attempting to import one of the files saved as XML, a pop-up appears that says, "The actual finish date is before some of the previously entered timephased actual work values. If  you continue with this operation, Project will truncate
    some of the previously entered timephased actual work values. To continue, click OK..."
    When attempting to import the other file saved as XML, I get a series of pop-ups identifying a series of tasks that say, "The timephased edit will cause 'Develop Requirements Review Meeting Mi...' to start before 'Conduct Requirements Review"
    finishes.  As a result the task link cannot be honored.  You can: () Continue. Keep the timephased edit and ignore the link.  () Cancel. Ignore the timephased edit.  (OK/Cancel/Help)".
    Interestingly, both files contain external Project Server predecessor / successor links.  In the case of the first file, the XML import just appears to strip those out.  In the case of the second file, I get a long series of pop-ups (with
    some buggy text inserts) in pairs.  The first message in the pair is typically "An import error occurred.  The element <PredecessorLink> in the <Task> element with <UID>=611 has invalid data.  Verify that the file
    name and path are correct, and then try again. (OK)", where the indicated UID varies. The second pop-up in the pair appears to have a buggy text constructor and looks like this, with "[stet]" indicating the apparent buggy text inserts,
    "An import error occurred.  The element [stet] Verify that the file name and path are correct, and then try again. [stet] in the 309 element with <UID>=7 has invalid data. [stet] ^4 (OK)"
    In the second pop-up of the pair, the "xyz element" varies, but the "<UID>=7" reference and "^4"  are consistent. In the XML, UID 7 appears to refer to a calendar, a task which includes a number
    of entries similar to:
    <TimephasedData>
    <Type>24</Type>
    <UID>7</UID>
    <Start>2014-10-03T08:00:00</Start>
    <Finish>2014-10-04T08:00:00</Finish>
    <Unit>2</Unit>
    <Value>PT8H0M0S</Value>
    </TimephasedData>
    ... and to an assignment:
    <Assignment>
    <UID>7</UID>
    <TaskUID>10</TaskUID>
    <ResourceUID>-65535</ResourceUID>
    <PercentWorkComplete>100</PercentWorkComplete>
    which includes blocks like:
    <TimephasedData>
    <Type>2</Type>
    <UID>7</UID>
    <Start>2014-10-17T08:00:00</Start>
    <Finish>2014-10-17T17:00:00</Finish>
    <Unit>2</Unit>
    <Value>PT8H0M0S</Value>
    </TimephasedData>
    Eventually, the second file also does load with no external file links indicated.
    Again, I'm just looking for anything that might be a clue to the long Project Server load times.
    Thanks in advance,
    LP

    Slow performance can come from a number of different things. Without knowing more detailed information about your setup or workflow, it's difficult to accurately troubleshoot.
    -What kind of Mac are you using?
    -What is your source format?
    -Where is your source footage located?

  • Java executeBatch() - Problem in INSERT (Order of  records not maintained)

    When we make a executeBatch() . And when the use
    select * from DUMMY_FILE_S order by ROWID
    or
    select * from DUMMY_FILE_SThe rows returned are in different order.( that is its not in the order what is inserted actually)
    And this happens once in a While.
    This is will happen only if we try many times also So please try with many INSERTs
    Please find the Java Code and the Insert SQL.
    import java.sql.Connection;
    import java.sql.SQLException;
    import java.sql.Statement;
    import java.io.*;
    import java.sql.DriverManager;
    public class warranty_dummy
         public static void main(String args[])
                String FILENAME = "D:/data.sql";
                Connection conn = null;
                //String db_file_name_prefix = "@localhost:1531:xxxx_y14";
                   try {
                       Class.forName("oracle.jdbc.OracleDriver").newInstance();
                       // DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
                        catch (ClassNotFoundException e) {
                               e.printStackTrace();
                               //System.out.println("INSIDE class forname :"+ e.getStackTrace());
                   }catch(Exception e){
                        e.printStackTrace();
             try{
                    conn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1531:yyyy_xxxx","my_user","password");
                 Statement stmt = conn.createStatement();
                   BufferedReader in = new BufferedReader(new FileReader(FILENAME));
                 String line = in.readLine();
                 System.out.println("Line " + line);
                  while(line != null) {
                 System.out.println("Line 1" + line);
                   stmt.addBatch(line);
                 line = in.readLine();
                 System.out.println("Outside While");
                 in.close();
                 int iarray[] = stmt.executeBatch();
                 System.out.println("Count" + iarray.length);
                 catch (Exception e ){
                         System.out.println("Error attempting to store results for batch " + e.getMessage());
                     } finally {
                         try {
                             conn.commit();
                             conn.close();
                         } catch (Exception se) {
                             System.out.println("Error attempting to store results for batch "+ se.getMessage());
    }SQL Data sample
    INSERT INTO DUMMY_FILE_S (FILE_NO,S_NO) values (44444,'123456789')
    INSERT INTO DUMMY_FILE_S (FILE_NO,S_NO) values (44444,'567891234')
    INSERT INTO DUMMY_FILE_S (FILE_NO,S_NO) values (44444,'333333333')
    INSERT INTO DUMMY_FILE_S (FILE_NO,S_NO) values (44444,'323232323')

    Thanks for your prompt reply.
    If we even use ORDER BY clause, we still don't get the records in the order what we inserted.
    And we see that the problem is in smt.executeBatch(); is not inserting the records the way its inserted
    For Example.
    if we insert
    INSERT INTO MyTable (SERIAL_NUMBER, DESCRIPTION ) VALUES (1,"test1");
    INSERT INTO MyTable (SERIAL_NUMBER, DESCRIPTION ) VALUES (2,"test2");
    INSERT INTO MyTable (SERIAL_NUMBER, DESCRIPTION ) VALUES (3,"test3");
    INSERT INTO MyTable (SERIAL_NUMBER, DESCRIPTION ) VALUES (4,"test4");Note : (Using smt.executeBatch();)
    After that when we use
    Select * from MyTable ORDER BY ROWIDFor some time we get the result of the query as ( In the order we Insert )
    SERIAL_NUMBER, DESCRIPTION
    ==========================
    1,test1
    2,test2
    3,test3
    4,test4And For some time we get the result of the query as ( We don't get the records in the order we Insert )
    SERIAL_NUMBER, DESCRIPTION
    ==========================
    1,test1
    3,test3
    2,test2
    4,test4Is there any work around for this?
    Thanks in advance

  • Data loader : Import -- creating duplicate records ?

    Hi all,
    does anyone have also encountered the behaviour with Oracle Data Loader that duplicate records are created (also if i set the option: duplicatecheckoption=externalid) When i am checking the "import request queue - view" the request parameters of the job looks fine! ->
    Duplicate Checking Method == External Unique ID
    Action Taken if Duplicate Found == Overwrite Existing Records
    but data loader have created new records where the "External Unique ID" is already existent..
    Very strange is that when i create the import manually (by using Import Wizard) exactly the same import does work correct! Here the duplicate checking method works correct and the record is updated....
    I know the data loader has 2 methods, one for update and the other for import, however i do not expect that the import creates duplicates if the record is already existing, rather doing nothing!
    Anyone else experiencing the same ?? I hope that this is not expected behaviour!! - by the way method - "Update" works fine.
    thanks in advance, Juergen
    Edited by: 791265 on 27.08.2010 07:25
    Edited by: 791265 on 27.08.2010 07:26

    Sorry to hear about your duplicate records, Juergen. Hopefully you performed a small test load first, before a full load, which is a best practice for data import that we recommend in our documentation and courses.
    Sorry also to inform you that this is expected behavior --- Data Loader does not check for duplicates when inserting (aka importing). It only checks for duplicates when updating (aka overwriting). This is extensively documented in the Data Loader User Guide, the Data Loader FAQ, and in the Data Import Options Overview document.
    You should review all documentation on Oracle Data Loader On Demand before using it.
    These resources (and a recommended learning path for Data Loader) can all be found on the Data Import Resources page of the Training and Support Center. At the top right of the CRM On Demand application, click Training and Support, and search for "*data import resources*". This should bring you to the page.
    Pete

  • SQL Server 2012 Express bulk Insert flat file 1million rows with "" as delimeter

    Hi,
    I wanted to see if anyone can help me out. I am on SQL server 2012 express. I cannot use OPENROWSET because my system is x64 and my Microsoft office suit is x32 (Microsoft.Jet.OLEDB.4.0).
    So I used Import wizard and is not working either. 
    The only thing that let me import this large file, is:
    CREATE TABLE #LOADLARGEFLATFILE
    Column1
    varchar(100), Column2 varchar(100), Column3 varchar(100),
    Column4 nvarchar(max)
    BULK INSERT
    #LOADLARGEFLATFILE
    FROM 'C:\FolderBigFile\LARGEFLATFILE.txt'
    WITH 
    FIRSTROW = 2,
    FIELDTERMINATOR ='\t',
    ROWTERMINATOR ='\n'
    The problem with CREATE TABLE and BULK INSERT is that my flat file comes with text qualifiers - "". Is there a way to prevent the quotes "" from loading in the bulk insert? Below is the data. 
    Column1
    Column2
    Column3
    Column4
    "Socket Adapter"
    8456AB
    $4.25
    "Item - Square Drive Socket Adapter | For "
    "Butt Splice" 
    9586CB
    $14.51
    "Item - Butt Splice"
    "Bleach"
    6589TE
    $27.30
    "Item - Bleach | Size - 96 oz. | Container Type"
    Ed,
    Edwin Lopera

    Hi lgnusLumen,
    According to your description, you use BULK INSERT to import data from a data file to the SQL table. However, to be usable as a data file for bulk import, a CSV file must comply with the following restrictions:
    1. Data fields never contain the field terminator.
    2. Either none or all of the values in a data field are enclosed in quotation marks ("").
    In your data file, the quotes aren't consistent, if you want to prevent the quotes "" from loading in the bulk insert, I recommend you use SQL Server Import and Export Wizard tools in SQL Server Express version. area, it will allow to strip the
    double quote from columns, you can review the following screenshot.
    In other SQL Server version, we can use SQL Server Integration Services (SSIS) to import data from a flat file (.csv) with removing the double quotes. For more information, you can review the following article.
    http://www.mssqltips.com/sqlservertip/1316/strip-double-quotes-from-an-import-file-in-integration-services-ssis/
    In addition, you can create a function to convert a CSV to a usable format for Bulk Insert. It will replace all field-delimiting commas with a new delimiter. You can then use the new field delimiter instead of a comma. For more information, see:
    http://stackoverflow.com/questions/782353/sql-server-bulk-insert-of-csv-file-with-inconsistent-quotes
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Reg: importing/exporting repositories problem

    Hi all,
    I done all the exports from development in below vice versa:
    from topology:
    export master repository
    export topology
    export logical topology
    export execution environment
    from security
    export security settings
    from designer
    export work repository
    all are in .zip file formats only.
    i created 2 new schams in production db like impmaster for master repository and impwork for work repository
    then next
    i created one new login name example produtionmastr
    1)after that i imported master repository from import master repository winzard.
    2)it imported sucess fully i got all technologies,physical servers,physical schems,logical schemas,agents,contexts also.
    3)next i tried to import topology,logical topology and execution environment it takes time but nothing will be impoted. (my quwstion is what is the reason for we
    again import topology logical topology again,when the time import master repository only we are getting all the things in topology.then what is use for this options.)
    4)next think i created one work repository in topology manager with different id from development
    5)i created login name for work repository and i login to designer.
    6) i imported work repository from zip file using synonym insert mode. imported success.
    7)i changed all the physical paths in physical data servers. every thing fine.
    8)but i am getting problem with agent.previously i am working with odi 10.1.3.
    error is:
    oracle.odi.runtime.agent.invocation.InvocationException: ODI-1221: Unable to restart session 11050: session is not found in work repository WORKREP1.
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:260)
         at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartSession(InternalRemoteRuntimeAgentInvoker.java:171)
         at com.sunopsis.graphical.dialog.SnpsDialogExecution.runStartSession(SnpsDialogExecution.java:1972)
         at com.sunopsis.graphical.dialog.SnpsDialogExecution.doVariableExecuter(SnpsDialogExecution.java:1340)
         at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.handleRefreshVariableAction(EditFrameSnpVar.java:818)
         at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.access$6(EditFrameSnpVar.java:796)
         at com.sunopsis.graphical.frame.edit.EditFrameSnpVar$1.actionPerformed(EditFrameSnpVar.java:346)
         at com.sunopsis.graphical.component.toolbar.OdiTextAreaToolbarAction.executeAction(OdiTextAreaToolbarAction.java:146)
         at com.sunopsis.graphical.component.toolbar.AbstractOdiToolbarAction.actionPerformed(AbstractOdiToolbarAction.java:203)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2319)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:274)
         at java.awt.Component.processMouseEvent(Component.java:6289)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
         at java.awt.Component.processEvent(Component.java:6054)
         at java.awt.Container.processEvent(Container.java:2042)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4483)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2479)
         at java.awt.EventQueue$1.run(EventQueue.java:601)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
         at java.awt.EventQueue$2.run(EventQueue.java:618)
         at java.awt.EventQueue$2.run(EventQueue.java:615)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:270)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:175)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:170)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:162)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    9)in 11g odi agent creation was totally different all configurations need to odiparams.bat.
    10)my doubt can i need to update all the repository names in odiparams.bat file
    11)or we can reuse the one agent to all repositories why because in 11g we are giving all reps names in odiparams.bat file.
    please share your solutions
    Regards,
    Surya

    3)next i tried to import topology,logical topology and execution environment it takes time but nothing will be imported. (my quwstion is what is the reason for we
    again import topology logical topology again,when the time import master repository only we are getting all the things in topology.then what is use for this options.)
    Ideally i would suggest when you are importing for the first time you can use the Import Master Repository wizard and from next time if any small changes has then import those individual ODI Object.
    You don't have to repeats those individual import once the Master Repository Import is successful.
    Reg Agent Error You can create an Agent manually in the your new Topology.
    I believe you have upgraded from 10g to 11g . In that case all your Master Rep url and credentials might change and so the old odiparams might not work .Please update odiparams accordingly.

  • ESYU: Order Import를 통해 기존 Order를 reference 하는 RMA Order를 생성하는 방법

    Purpose
    Oracle Order Management - Version: 11.5.9 to 12.0.5
    Information in this document applies to any platform.
    Order Import를 통해 기존 존재하는 Order를 reference 하는 RMA Order의 생성 방법을 알아본다.
    Solution
    Order Import interface의 header와 line에 data를 insert 하기 위해 아래 script를 이용한다.
    INSERT INTO OE_HEADERS_IFACE_ALL (
    order_source_id
    ,orig_sys_document_ref
    ,creation_date
    ,created_by
    ,last_update_date
    ,last_updated_by
    ,operation_code
    ,sold_to_org_id
    ,order_type_id
    ,booked_flag
    VALUES
    1227 --order_source_id
    ,'123456' --orig_sys_document_ref
    ,sysdate --creation_date
    ,-1 --created_by
    ,sysdate --last_update_date
    ,-1 --last_updated_by
    ,'INSERT' --operation_code
    ,1005 --sold_to_org_id
    ,1436 --order_type_id
    ,'Y' --booked_flag
    INSERT INTO OE_LINES_IFACE_ALL (
    order_source_id
    ,orig_sys_document_ref
    ,orig_sys_line_ref
    ,inventory_item_id
    ,ordered_quantity
    ,operation_code
    ,created_by
    ,creation_date
    ,last_updated_by
    ,last_update_date
    ,return_reason_code
    ,return_context
    ,return_attribute1
    ,return_attribute2
    VALUES
    1227 --order_source_id
    ,'123456' --orig_sys_document_ref
    ,'1' --orig_sys_line_ref
    ,249 --inventory_item_id
    ,10 --ordered_quantity
    ,'INSERT' --operation_code
    ,-1 --created_by
    ,sysdate --creation_date
    ,-1 --last_updated_by
    ,sysdate --last_update_date
    ,'CANCELLATION' --return_reason_code
    ,'ORDER' --referencing a sales order
    ,'157638' --header_id of referenced order
    ,'256619' --line_id of referenced line
    commit;
    API guide와 eTRAM을 참조하여 귀사의 testcase에 알맞게 위 insert script를 수정하거나 다른 columns을 add 한다.
    위 모든 interface tables의 order_source_id에는 당신의 order_source_id 값을 입력한다.
    위 모든 interface tables의 orig_sys_document_ref에는 각각의 order에 대한 unique 값을 입력한다.
    Interface table에 값을 insert 하면 Order Import Concurrent program을 실행한다.
    - Navigate to Orders, Returns -> Import Orders -> Order Import Request
    - Select your Order Source from the LOV in the parameters form.
    - Submit the concurrent request.
    Reference
    Note 746668.1

  • ESYU: Order Import를 통해 간단한 ATO Model을 위한 Order를 생성하는 방법

    Purpose
    Oracle Order Management - Version: 11.5.9 to 12.0.5
    Information in this document applies to any platform.
    아래와 같은 구조를 갖는 간단한 ATO model을 위한 order를 order import를 통해 생성하는 방법에 대해 알아본다.
    ATO Model (542851)
    |- ATO Option Class (542852)
    |--Option Item (152840)
    Solution
    Order Import interface table에 header와 lines을 입력하는 아래 script를 이용한다.
    Interface tables에 data insert 후 Order Import concurrent program을 실행한다.
    INSERT INTO OE_HEADERS_IFACE_ALL (
    order_source_id
    ,orig_sys_document_ref
    ,creation_date
    ,created_by
    ,last_update_date
    ,last_updated_by
    ,operation_code
    ,sold_to_org_id
    VALUES (
    1227 --order_source_id
    ,'12345' --orig_sys_document_ref
    ,sysdate --creation_date
    ,-1 --created_by
    ,sysdate --last_update_date
    ,-1 --last_updated_by
    ,'INSERT' --operation_code
    ,1005 --sold_to_org_id
    INSERT INTO OE_LINES_IFACE_ALL (
    order_source_id
    ,orig_sys_document_ref
    ,orig_sys_line_ref
    ,inventory_item_id
    ,ordered_quantity
    ,operation_code
    ,created_by
    ,creation_date
    ,last_updated_by
    ,last_update_date
    ,top_model_line_ref
    ,item_type_code
    VALUES (
    1227 --order_source_id
    ,'12345' --orig_sys_document_ref
    ,'1' --orig_sys_line_ref
    ,542851 --inventory_item
    ,1 --ordered_quantity
    ,'INSERT' --operation_code
    ,-1 --created_by
    ,sysdate --creation_date
    ,-1 --last_updated_by
    ,sysdate --last_update_date
    ,'1' --top_model_line_ref
    ,'MODEL' --item_type_code
    INSERT INTO OE_LINES_IFACE_ALL (
    order_source_id
    ,orig_sys_document_ref
    ,orig_sys_line_ref
    ,inventory_item_id
    ,ordered_quantity
    ,operation_code
    ,created_by
    ,creation_date
    ,last_updated_by
    ,last_update_date
    ,top_model_line_ref
    ,link_to_line_ref
    ,item_type_code
    VALUES (
    1227 --order_source_id
    ,'12345' --orig_sys_document_ref
    ,'2' --orig_sys_line_ref
    ,542852 --inventory_item_id
    ,1 --ordered_quantity
    ,'INSERT' --operation_code
    ,-1 --created_by
    ,sysdate --creation_date
    ,-1 --last_updated_by
    ,sysdate --last_update_date
    ,'1' --top_model_line_ref
    ,'1' --link_to_line_ref
    ,'CLASS' --item_type_code
    INSERT INTO OE_LINES_IFACE_ALL (
    order_source_id
    ,orig_sys_document_ref
    ,orig_sys_line_ref
    ,inventory_item_id
    ,ordered_quantity
    ,operation_code
    ,created_by
    ,creation_date
    ,last_updated_by
    ,last_update_date
    ,top_model_line_ref
    ,link_to_line_ref
    ,item_type_code
    VALUES (
    1227 --order_source_id
    ,'12345' --orig_sys_document_ref
    ,'3' --orig_sys_line_ref
    ,152840 --inventory_item_id
    ,1 --ordered_quantity
    ,'INSERT' --operation_code
    ,-1 --created_by
    ,sysdate --creation_date
    ,-1 --last_updated_by
    ,sysdate --last_update_date
    ,'1' --top_model_line_ref
    ,'2' --link_to_line_ref
    ,'OPTION' --item_type_code
    ); commit;
    - Orders, Returns -> Import Orders -> Order Import Request
    - Parameter form의 Order Source LOV에서 Order Source를 선택
    - Submit the concurrent request.
    Reference
    Note 746677.1

  • How to insert media file in keynote

    Is ther any way to insert or import audio and video (media files) in a Keynote presentation ?
    Then it is possible to export it for PC format like PowerPoint or the opposite, build the presentation in PowerPoint then import in Keynote ?
    Thanks

    Drag and drop the file from its location on to a slide in Keynote.
    Keynote can create a Powerpoint file Share > Export > Powerpoint
    Powerpoint does not have the ability to create Keynote files.

  • Auto Complete import statements

    When I create a new Module and select "optimize for application" when I am writing actionscript I seem to have a 50/50 chance of Flash Builder auto inserting the import statements.  In preferences I've selected restore defaults and under Project 'Build Automatically' is selected.  AutoComplete works great just not inserting import statements.   Am I missing something?

    The idea behind "Organize imports" is that it should remove used imports only if it detects they aren't needed in your document anymore, either because they are duplicates, don't exist or are in the same package as your current context.
    If this feature is removing imports that don't fit within those conditions, please file a bug and include a test file we can use to reproduce it on our side.  The bugbase url is here: http://bugs.adobe.com/flex.
    Thanks!
    -David

  • Error - '.' expected - while database insert thru JSP & javabeans & JDBC

    I get the following error when i try to compile the below mentioned code in JDEVELOPER 10.1.2
    Error : '.' expected
    ===================
    have error in my code. I am trying to do a simple database insert program using javabeans and jsp. I get a value to be inserted in database through the jsp page in a text box and would like to be inserted into database using beans The connection to database and mysql query are in java file.
    Here is the code.
    <%@page contentType="text/html"%>
    <%@page pageEncoding="UTF-8"%>
    <%@ page language="Java" import="java.sql.*" %>
    <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
    <%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
    <html>
    <head>
    </head>
    <body>
    <form name="form1" action="beancode" method="POST">
    Emp ID: <input type="text" name ="emplid"> <br><br><br>
    <input type = "submit" value="Submit">
    <jsp:useBean id="sampl" class="beancode" scope="page">
    <jsp:setProperty name="sampl" property="*"/>
    </jsp:useBean>
    </form>
    </body>
    </html>
    I know i might have made a mistake here in using the bean. Here is the java code which does the insert part.
    import java.sql.Connection;
    import java.sql.DriverManager;
    import java.sql.PreparedStatement;
    import java.sql.ResultSet;
    * @author Trainees
    public class beancode
    private String employid;
    private Connection con = null;
    private ResultSet rs = null;
    private PreparedStatement st = null;
    /** Creates a new instance of beancode */
    public beancode()
    try
              Class.forName("org.gjt.mm.mysql.Driver");
              Connection con = DriverManager.getConnection("jdbc:mysql://localhost:3306/sample?user=user&password=password");
    catch(Exception e)
              System.out.println(e.getMessage());
    public void setemployid(String empid)
              employid = empid;
         public String getemployid()
              return (employid);
    public void insert()
    try
    String s1="insert into samp values('"+employid+"')";
    st = con.prepareStatement(s1);
    st.executeUpdate();
    st.clearParameters();
    st.close();
    catch(Exception m)
    }

    It's pretty hard to spot any errors the way it's currently formatted. But, you're trying to call the beancode when submitting your form, but the beancode isn't a servlet. Try to find a working example, run it, and then change it to implement your requirements.
    The following example shows you have to use the jstl sql tags: http://www.oracle.com/technology/sample_code/tech/java/codesnippet/jsps/jstlsql.html. If you want to do an insert when a user submits a form, you need 2 pages. The first will contain your form, the second will insert the record.
    (once you've got that running, look for some examples using an mvc framework, and how to use bind variables with jdbc)

  • Can fcp X import .TOD files without first having to convert?

    Just hoping i can go in th fcp in one step instead of 3 very long ones...

    fcp x cannot import JVC TOD files natively. you will have to convert them (preferably to prores 422).
    you should be able to import files (with memory card inserted) or import from camera (with camera connected).

Maybe you are looking for