Inserting photo into project not working right
When I inserted a photo from iPhoto between two video clips, the thumbnail shows in the right place. But, when I scrub over it (or just PLAY it) the image is really a freeze of the last frame of the clip before it! Any editing on that clip just shows that same freeze frame - like setting duration, adjusting Ken Burns, etc.
I have done this same procedure several times before, in other projects, with no problems.
Help!
rick
See the topic:
iMovie displaying wrong clips from project
Similar Messages
-
iPad has not worked right since it updated to latest software. Tried to question Apple about it but it costs 20 bucks just to lodge a complaint. Is this normal Apple behavior or am I missing something. Also anyone else having issues with upgrade to iOS7. It was working great until that point and now goes into reboot mode often and sometimes will continuously reboot several times. I have tried to restore but that didn't clear the problem. Any thoughts or help would be appreciated.
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Can't find some albums when trying to insert photos into other programs
I am having trouble finding albums (and thus pictures) when trying to insert photos into a Word document or upload to mySpace/ facebook etc.
After choosing 'insert<picture<from file<pictures<iPhoto Library' , I have the option of looking into the year-month-date or by album. Since I have a better memory of the 50+ albums I have created rather than their dates, I choose "Albums". This list only contains about half of my albums (with folder icons) and it appears outdated...ie one of the albums no longer exists in iPhoto and has been changed to a folders with several albums in it.
I'm wondering why this is happening or how i can update the album list. I realize i could use the year-month-day thing but that is too frustrating.
Carey
iBook G4 Mac OS X (10.4.3)
iBook G4 Mac OS X (10.4.3)Hi chantreya,
iPhoto 5 now stores the Album information in a data xml file. The Albums folder within the iPhoto Library folder is no longer used. At some point, usually after a rebuild, you will no longer have that folder in the Finder.
If you need to access photos from an album it is very difficult for a third party application to navigate the iPhoto Library in order to find the photo you need. You will have to know the date of import in order to find the photo.
There are some third party applications that can read the xml file and can navigate the iPhoto library and show you the Albums. Hopefully more applications will be revised to read this file.
Until then you will have to Share/Export the photos to the desktop. You can then navigate to the desktop to use the photos (example: web uploading from online photo site)
If your application supports drag and drop, you can drag the photo from an open iPhoto Library window into your application.
For email you can also use the email icon within iPhoto to open a message with the highlighted photo attached.
You can also use spotlight to find images in an Album...
This is what I have done using Spotlight to find my images that are in iPhoto albums without opening iPhoto..
In iPhoto, select the album, then select all, go to Photos/batch change.
Change the comments to text. In the text field I put the name of the Album.
Do this for each album.
Close iPhoto.
Open Spotlight and put in the name of the Album ( you have to remember the names of the albums or have then written down)
In the spotlight search results. click on "show all"
Under "Images" click on the "xx more" to show all the images in the album.
Make sure you have it in icon view, the icon view box is the last one on the blue images line.
Now you can control click on the image to "reveal in finder", open in iPhoto or Mail, etc.
I am not sure if this is going to make you happy and it is a little more work, but you can find images in albums and even view them in a slideshow (by clicking the play arrow at the end of the Images highlighted blue line) using Spotlight, all without opening iPhoto.
One important thing to know is you can set up a graphic program to be an external editor (when you double click an image in the library} such as PhotoShop or PS Elements. You set up that within iPhoto Preferences. Just make sure you save the image flattened and with the same name. The edits will then be relected in iPhoto when you hit "save".
Two Apple kbs for you to read
Don't tamper with files in the iPhoto library folder
About the iPhoto Library folder
Lori -
Share photos by email not working in Photos Version 1.0 (209.52.0) on a Macbook Pro 17" Yosemite 10.10.3. Brings up grayed out check box? Want to share photos thru MS Entourage for Mac 2008 Ver. 12.3.6 Thanks!
@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson -
Using iMovie 11 and can't insert photos into story line?
I just got IMovie 11 and the browsers won't highlight when trying to create a movie. I can't insert photos into the storyline
If I had to guess, and this merely based on reading iMovie Discussion Group threads, I would say sometimes Themes/Trailers/Animated Titles have problems. Not to say they cannot be used, but they can be the source of crashes and other bad behavior if something gets corrupted in them. Animated titles (in a regular iMovie Project) can cause instability and crashes. So I would say, some of those Themes may not be reliable and have pieces or parts built into the template that are causing this issue.
If you wanted to try doing a bit of preventive maintenance try this:
Go to Applications > Utilities > Disk Utility and launch this program
Click on the Repair button under Disk Permissions and let it run until it finishes. Reboot the Mac, and open iMovie see if you get any different behavior out of iMovie with one of those failed Project Theme movies if you have one still available to open and look at. I won't say this is going to fix it, but it's sometimes can help. Also there's an iMovie preferences file that can get corrupted and lead to problems. To find the iMovie prefs:
Go to the Desktop look for the Go Menu at the top menu bar. Hold down the Option key and click on the Go menu. Click on Library > Preferences.
In the list of files there are: com.apple.iMovieApp.plist and also com.apple.iApps.plist
Drag both of those to the trash and relaunch iMovie. See if that preference file deletion helps. -
Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?
Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
Sound Blaster X-FI Pci Express Front Panel Not working right Win7
ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out. -
Hi my iPad 2 is not working right is sayed I need to update it so I did and now I turn It on and it shows the USB and iTunes and I plugged it in and still nothing
Next try the remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Help, my iPod's not working right.
Help. I unfortunately downloaded iOS 6.0 to my iPod touch and now it's not working right. I can't listen to anything in the itunes store and a song I tried to download doesn't work on my iPod, yet it works on my computer. Is there anyway to go back to the old OS system I had before this one? Is this happening to anyone else? What can I do?
You are very welcome!
It would seem that the problem was that you were not logged into your iTunes account on your device, and logging in fixed it.
That is great! You did well in your troubleshooting. I'm glad you got it fixed. Sometimes, just messing around with it, trying to figure it out helps.
As for updating, it would be good to do as I suggested, but I don't know what Apple's next update will hold for our devices. Whether it will fix only some, or all of the problems. So I would say that keeping an eye out, maybe on this forum, for results of the next update, whether or not it helped others, and how much it fixed. It may even take a few more updates for it to come back around to working as it should. Once your device doesn't seem to be full of errors and bugs, (and maybe the Apple forums are full of positive reviews) then you can stop updating. I'm not saying that updates are always bad, it is hard to tell. So if your comfortable with how your device is working, then you can choose to ignore future updates, it's your choice. I don't know when the updates are coming out either, so we are all riding it and seeing how it will turn out.
You can mark this discussion as solved if you want.
If in the future you have some questions, you can dig up your notification emails that were sent to notify you of these posts (if you keep them) and navigate back to this discussion and make a post. Because I am subscribed to this post too, so if you do make a post in this discussion, I will be notified.
I'm glad everything worked out, I am always happy to help.
Thank you for being precise and clear in your questions and results. (And the great grammar, it's so rare!)
Sincerely Lt. Leviathan -
on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
i cant see menu page on display screenhttp://support.apple.com/kb/HT1808
-
I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Solved!
Go to Solution.netmouse wrote:
I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Might not even be a remote issue. Have you tried rebooting the box?
If you do think it's the remote it's still under warranty.
You can get a free replacement easy within the dvr's menu.
Here is a page that tells you ways to get a replacement.
http://www.verizon.com/support/residential/tv/fiostv/remote+controls/troubleshooting/questionsone/12...
Get a new remote and if you still have the same issues then you'll know its the dvr that needs to be replaced. -
My iPod is not working right. It's slow and lags and just doesn't work and always exits apps. I was if there was any way to redownload ios5 because it does the same things after I've reset about 4 times. Please help! It's even lagging why I am typing this. The thing that I checked below are all of the things that are not working on my iPod.
You cannot reinstall iOS without doing a restore. But you might first try a software update. If you have iOS 5.0 or 5.0.1, you can update to iOS 5.1 by going to Settings > General > Software Update.
-
my photo stream does not work at all. I've tried making a new album, but that does not work. So I've tried using an already existing album and deleting the pictures there. I decided to only upload 1 photo from my old phone (iPhone 4s iOS 7.1.1) to see if it'll show up on my new device (iPhone 5 iOS 8.1.1) it doesnt even show up in my new phone (iPhone 6 iOS 8.1.2) this picture is what shows up on both my iPhone 6 and 5 but on the 4s there is a picture that I "uploaded" and a second one that came out of nowhere. I do not know what to do because in the past this has worked out for me and it shows up on all three devices
You can't restore to a backup that was taken on a device which has a higher version of iOS than on your iPad, you will have to update your iPad to 8.1.3 to be able to restore to it
You should be able to update your iPad via Settings > General > Software Update -
Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.See:
Can't connect to the iTunes Store -
IWeb photo gallery does not work in IE
Does anyone know why iWeb photo gallery does not work in Internet Explorer but does work in Safari, Chrome & Firefox?
What kind of a response are you looking for with a post like that, seriously? Change this or that in your unprovided code? Use this or that gallery, which may be the gallery you're already using. We don't know because you haven't mention specifics, provided any code, or any other relevant information to produce a helpful response. All you've said is you click a link and it's white. Kudos.
We're not mind readers and no one is looking over your shoulder watching what you're doing. Get it together... and when you do, post a link so we can see what you're talking about. jeez.
Maybe you are looking for
-
Time Machine and a CRY for Help!!!!
Hi After 25 years being a windows user I finally came over to Apple this month. I bought a IMAC 24" intel 2.88(OS X 10.5.3) and thought I might as well get a Time Capsule (500GB). I absolutely love the IMAC and wish I had got one years ago. My proble
-
I have been using thunderbird for some years - in last month when I have been trying to send some emails I have a problem with some of them in that part of the email address has changed when I insert it ino the address bar and has inverted commas aro
-
Watch film from deskstop on apple tv
how do i watch a film on apple tv that ive downloaded onto my desktop
-
Uploading the partner function for the business partner
Hi Experts , I wish to upalod the partner function fields like partner function sales area division channel etc . Can anyone suggest me how to uaplod this via a BAPI in ECC system ? regards Abhi.
-
hi all, plz help me out,the purhase order created in one system should genarate the idoc and passes to other system creating sales order.here my prob is if the client is modifying the purchase order(for which the sales order is alredy genarate