Install BPC for Office memory error

Hi, I have a Windows 7 workstation with 8Gb of RAM. When I try to install BPC for Office, I get the following error: 'Not enough memory. A minimum of 64 MB of memory is require." How do I get around it?

Hi
As per Sorinu2019s response, until 7.5 there is no official support for Windows 7 or 64-bit operating system.
However, with that said, if you still wish to progress at your own risk, then you can do so.
You will first need to get Microsoft .Net 1.1 (32-Bit) installed and configured.
Then you can install BPC client. However, you cannot install the client from the OSOFT WebPage, else you will receive 'Not enough memoryu2019 error.
You will need to copy the two executables for the client installation (EverestAdmin and EverestClient) to the client PC and install by running these executables. You must be logged onto the client PC as an account with full local Administrator privileges, and you must also be logged in as an account with full local Administrator privileges for first logon to BPC Admin and BPC Office client.
Be aware that certain functionality may not work as expected, for example PDF Publishing.
Regards
Shaam

Similar Messages

Unable to do BPC for Office Installation via BPC Client software

Hi,
I am trying to install "BPC for Office Installation" via the client software center. I get an error "You do not have authority to install the BPC for Office.".
I am on Windows 7 Home premium. My username is the only name on the computer and has admin rights.
I did browse through a few threads in this forum and as per the suggestions, I installed .NET 1.1 and service pack for it.
I also modified the "hosts" file in system32\drivers\etc to include the lines I need.
IT STILL DOESNT WORK !
PLEASE HELP!
Regards,
Tagz

Thanks for your response Patrick!
I enable the Intranet option as per the note and added the website to my zone in the browser security option.
I get case 2 error as per the note. I tried going to the next step. Now it says "Not enough memory. A minimum of 64 MB of memory is required.". My computer though has 4GB memory.
Please advice!
Thanks,
Tagz

Error when connecting to BPC for Office

Hi experts,
We are using BPC 7.5 MS SP06. We are in the following configuration :
Windows 7 - 64bits
.Net 4.5.2
Office 2010 - 32bits
When we launch the SAP BPC for Office (Excel) we receive the following error message :
The system cannot connect to the
(HTTP://servername) Application server. Verify that you have specified a valid
Application server name, or see if the Application server is unavailable at
this time.
Automation error
The system cannot find the file specified. (Assembly: OSoftComLibClient.dll, Object:OSoft.Consumers.Common.WebServiceCall50.WebServiceCall)
We try to register the dll by running a command
%systemroot%\SysWoW64\regsvr32 <complete path to the OSoftComLibClient.dll>
without any success.
We also tried to copy the dll from another PC but it has failed the same way.
Please, be aware that we succeed in connecting with the same user from another machine with the following configuration:
Windows 7 - 32bits
Net 4.5.2
Office 2010 - 32bits
Can you help ?
Best regards,
Anne

Dear Roberto,
We are working on a test PC where we installed Windows 7 Enterprise - 64 bits from scratch with the .Net Framework 3.5.1 included.
The client diagnostic don't show anything wrong:
Windows System Directory:C:\Windows\system32\
Language
    System default language:ENGLISH
    User default language:ENGLISH
    Installed Planning and Consolidation program language:ENGLISH
[Prerequisite software]
Microsoft Windows
    Windows Version:
    Windows Build Number:7600
    Windows Service Pack:Not installed
Internet Explorer Version
    Required:6.0 or higher
    Currently:8.0.7600.16385
    Status:OK
Microsoft Excel Version
    Required:Excel 2000(9.0) or higher
    Currently:Microsoft Excel 2003 higher
    Status:OK
Microsoft XML Version
    Required:8.10.8308.0 or higher
    Currently:8.110.7600.16385
    Status:OK
Microsoft .Net Framework Version
    Required:2.0.50727
    Status:OK
[Internet Explorer Option setting]
Proxy server
    No proxy setting
Use HTTP 1.1
    Required:TRUE
    Currently:TRUE
    Status:OK
Do not save encrypted pages to disk
    Required:TRUE
    Currently:FALSE
    Status:Error
[Application server IIS information]
Server location: http://<servername>
Allow: OPTIONS, TRACE, GET, HEAD, POST
Server: Microsoft-IIS/7.5
Public: OPTIONS, TRACE, GET, HEAD, POST
X-Powered-By: ASP.NET
Date: Thu, 10 Jul 2014 12:04:48 GMT
Content-Length: 0
[Files]
Planning and Consolidation for Office client Folder:C:\Program Files (x86)\SAP BusinessObjects\PC_MS\
File: C:\Windows\system32\msvbvm60.dll
    File Version:6.0.98.15
    Status:OK
File: C:\Windows\system32\stdole2.tlb
    Status:OK
File: C:\Windows\system32\scrrun.dll
    File Version:5.8.7600.16385
    Status:OK
File Check Result:OK
End of file
How can we go ahead ?
Thanks for your answer,
Anne

Problem by installing BPC for Officel!

Hi Experts.
I have installed BPC client administrator and BPC for Office! but when I came into it, It does not show neither the option eSubmit or another options.
In another laptop, I can see that options. May be by the version of M. Office?? I have the 2007 version!!
Anybody can help me?
Thanks.

Vicente,
After your installation, did you BPC Client Diagnostic and check if installation is sucessfull?
And are you logging in from BPC launch page or using Excel LOG ON add in?
I was never able to use the excel log on add in. When I click on it, it doesnt perform any thing.
Kranthi

I can't install itunes for windows get error message 5

i can't install itunes for windows get error message 5

I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop).

Mail for exchange - memory error - E71

I have an E71 which has worked ok for about 2 weeks (thats all i have had it) and now its coming up with sync error as the phone memory is full .....
You can only install the application on the phone memory - so not sure what to do
all for exchange is 2.07 latest version.....
any help please

I have the same problem with a Nokia 6300 when i try to access the internet, my memory seems to be full but i have only had the phone a few weeks. Some friends have said i should get a biger memory car eg. 2gb but another has said my phone isn't set up to go on some sites. So which is it?
Ta,

"Your Mac OS X startup disk has no more space available for application memory" error?

I've searched the web high and low to resolve this issue, tried many different approaches, and have not been able to resolve it. I'm really looking for help at this point.
I'm trying to export a 5 minute video that I've put together using FCPX 10.0.8. I export "master file" to an external hard drive and at some point in the export process I get the following popup:
System information:
13" mid-2011 Macbook Air
Processor 1.8 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3 (2GB x2)
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Lion 10.7.5
Hard drive: 256 SSD (107 GB available)
FCPX project information:
FCPX media is stored on SSD system drive and exporting to external drive
Media is 1080p 24 frame footage shot using a Canon T2i
Total Length of project is 5:13
Background rendering is off
Proxy media is created for all media but I am exporting original media
I've tried the following:
Freeing up more hard drive space - I've anywhere from 25 GB to 107 GB free and it does not seem to matter how much free space I have, I still get the error
Repairing system drive - I've repaired permissions with Disk Utility and I've even performed a drive Rebuild using DiskWarrior
Cleaning up FCPX project - I've gone through and deleted all unused media, deleted project and event render files, etc
Cleared RAM - During export I've repeatedly ran MemoryKeeper to clear RAM and free up more memory
System restart before attempting the export and I also boot up holding 'shift' which blocks unnecessary background tasks, dropbox, etc from starting
Considerations/Observations:
I've exported longer and more complex projects using the same setup with no problem, also with less free disk space
I've never seen this error in any other situation
The error will pop up anywhere from the export being 35% to 98% completed
Activity Monitor during export:
The only processes that are taking up any considerable memory are FCPX and kernal_task
'% CPU' on FCPX jumps around from 60% or less to 250% or more
FCPX usually has 83 threads
'Real Memory' for FCPX can be anywhere from 300 MB to 2 GB
It seems that when the export is at about 25% or 30% that is when the computer starts slowing down, 'Free' system memory goes down to mere megabytes, and a ton of swapfiles start to generate in .../var/vm folder which will build up until I'm out of disk space
Sometimes the error will pop up even before I run out of disk space due to the swapfiles. Last time it came up when I still had 40 GB free
Screenshot of Activity Monitor 'System Memory' during a previous attempt to export, taken right as the error popped up:
Thanks in advance to anyone willing to help me figure this one out!

I've tried the following:
Freeing up more hard drive space - I've anywhere from 25 GB to 107 GB free and it does not seem to matter how much free space I have, I still get the error
Repairing system drive - I've repaired permissions with Disk Utility and I've even performed a drive Rebuild using DiskWarrior
Cleaning up FCPX project - I've gone through and deleted all unused media, deleted project and event render files, etc
Cleared RAM - During export I've repeatedly ran MemoryKeeper to clear RAM and free up more memory
System restart before attempting the export and I also boot up holding 'shift' which blocks unnecessary background tasks, dropbox, etc from starting
Activity Monitor during export:
The only processes that are taking up any considerable memory are FCPX and kernal_task
'% CPU' on FCPX jumps around from 60% or less to 250% or more
FCPX usually has 83 threads
'Real Memory' for FCPX can be anywhere from 300 MB to 2 GB
It seems that when the export is at about 25% or 30% that is when the computer starts slowing down, 'Free' system memory goes down to mere megabytes, and a ton of swapfiles start to generate in .../var/vm folder which will build up until I'm out of disk space
Sometimes the error will pop up even before I run out of disk space due to the swapfiles. Last time it came up when I still had 40 GB free
Like Russ said, your system specs are pretty marginal - especially the 4GB of RAM. As you are experiencing this sometimes gets rapidly depleted, so the system starts to use swap on the system drive - the internal SSD. You have written about freeing hard drive space - do you mean in the external? You really need room in the internal SSD: not for your export, but for system stuff like sleepimage, swap space etc. The error message is pretty clear: you reached a situation where there is not enough space in the SSD for your system to work properly.

Smart file examiner wont install updates for office on my macbook air. i click step two for show info then nothing happens

I just got my my macbook air and I am still learning how to use it. I just put Office 2011 on it and there was an update for it after i installed it. I did the update and it downloaded it but then instead of installing Smart File Examiner opens and step 1 sleect file and this is were is went /Users/user/Library/Caches/TemporaryItems/3114AutoUpdate Installer.mpkg. Then it says information gathered successfully. step 2 click show information button. so I do and and the info on it opens in a new page, but it does not do anything else. So how do i finsh installing the update?

Downloading as we speak, and the first explanation that comes to mind is that both files have a .rar extension, and that since OS X doesn't support this archive format, you need to install a third-party utility to open them.
One files tool to open .rar files is The Unarchiver (here), and another is Stuffit Expander (there). 7zip also proposes a Mac version (here). All three will decompress a .rar file, and let you access the .dmg file(s) inside.
Also, depending on the browser you're using, and provided you might be inclined to open trusted files directly (I use Opera, and seldom save safe download; I click on "Open" in the download dialogue), your files could very well open... in the browser cache folder, out of sight. But if you use Safari, Chrome or Firefox, and you don't have any utility installed to handle .rar files, that's doubtful. I'm going to open your files now, and check if I can install them.
Stay tuned!
Edit: decompressing the first file using The Unarchiver shows that the archive is "incomplete". Which leads me to think that you might have to concatenate the two files to make one "complete" .dmg file.
If so, once they are decompressed, open a Terminal (in Applications/Utility), then type "cat", and drag both files in the window, one after the other (preferably in the right order...), type a space, then give the final file any name you want, followed by the .dmg file extension:
(e.g.:) "cat /Users/Your_Name/Desktop/File1.dmg /Users/Your_Name/File2.dmg /Users/Your_Name/Desktop/FinalFile.dmg"

No enought room on startup disk for Application Memory error

I have a macpro desktop computer with 8 GB of memory.
I am running what I know is a large problem for scientific application that runs from the Terminal. The application tries to solve 1,320,000 simultaneous linear equations. The problem starts when I use the Accelerate Framework as the Virtual Memory size jumps from 142 G to about 576 G after the library (LAPACK) is called to solve the system.
It does not do it if I use a solver that does not calls LAPACK inside Accelerate.
Any suggestions?
Thanks
F Lorenzo

Thanks WZZZ,
This is a screen capture of the application attempting to solve the problem using the LAPACK library inside the Accelerate framework: The original post did not show the captured screen, so here are the numbers as reported by the activity Monitor.
Tochnog Real Memory 6.68 GB
System Memory Free: 33.8 MB, Wired 378.8 MB, Active 5.06 GB, Inactive 2.53 GB, Used 7.96 GB.
VM size 567.52 GB, Page ins 270.8 MB, Page outs 108.2 MB, Swap used 505 MB
This is a screen copy of the same application solving the same problem without using the Accelerate framework.
Tochnog Real Memory 1.96 GB,
System Memory Free: 4.52 MB, Wired 382.1 MB, Active 2.69 GB, Inactive 416.2 GB, Used 3.47 GB.
VM size 148.60 GB, Page ins 288.8 MB, Page outs 108.2 MB, Swap used 2.5 MB
I can not understand the disparity in the behavior for the same case. As I said before, the only difference is the use of Accelerate in the first case. Also, as you can see, I thought that 8 GB of ram memory was a lot.
Your thoughts?
Thanks,
F Lorenzo

BPC for Excel crushes on startup

Hi, experts.
After installation of BPC for office client component - i'm trying to launch bpc for excel, but it crushes. When i.m pressing hyperlink "BPC for Excel" from http://<myserv>/osoft - Excel starts, window "Installing components COM" (or smnth like this, about COM installation) appears and after that Excel gives a message that its "not responding" and will be closed. Other office components of BPC client works (at least starts normally).
Version of Excel is 2007 SP2.
XceedZip.dll copied to installation path (C:\Programm Files\BPC)
Installed AccessDatabaseEngine.exe
Have anyone ideas how to fix this? (pls, don't offer to reinstall OS)
Best regards, andre
Edited by: andre mitk on Aug 28, 2009 3:54 PM

sorry for the delay.
1. yes, if i start excel separately - there is a LOGON button but the effact same as described in the top post. and its happens on several clients.
2. version: ВРС for MS 7.0 sp04
Edited by: andre mitk on Sep 2, 2009 8:10 AM

Cannot install BPC Client

Hi all
I am trying to install a BPC client both admin and office but i am having problems.
When i run Client diagnostics, it says that your computer has met all requirements. Please wait while BPC Administration software is downloaded.
but when i start the client download, system prompts me to Login to BPC server, Uname, PW, Domain. i enter the admin ID i used to install BPC, but i get LOGIN FAILED, DO YOU WANT TO RETRY? i have tried loging in using other accounts i created during BPC installation but failed.
What ID is BPC looking for??
Thanks in advance!

Hi all,
I am using BPC 7 for MS.
I able to login the BPC launch page, Run client diagnostics etc..
When i click BPC for office installation or BPC Administration Installation, it prompts me to enter login details. i enter the admin user i used to install BPC or the user i used to login BPC launch page, but fails.
Does the client installation really require you to enter login details? Also, i tried to change the login credentials in SERVER MANAGER. still the same result. what other areas should i check for the user credentials?
Hope u can help
Thanks!

BPC for NW 7.05: Copy Appset doesnt work

Hi Experts,
We installed BPC for Netweaver according the installing guidelines. One of the last steps there is to copy AppShell to another shell (COPY_APPSET). This worked already. Now we are trying to copy AppShell a third time for another scenario and it doesnu2019t work anymore.
Error text: COPY_APPSET failed to complete: ABAP/4 processor: raise_exception
In the backend of the system we can see a short dump in ST22.
Has anyone an idea?
Thanks in advance.
Best regards Nils
Laufzeitfehler GETWA_NOT_ASSIGNED
Datum und Zeit 10.11.2009 14:22:29
|Was ist passiert? |
| Fehler im ABAP-Anwendungsprogramm. |
| |
| Das laufende ABAP-Programm "CL_UJQ_QUERY_ENGINE===========CP" mußte abgebrochen |
| werden, da es auf |
| eine Anweisung gestoßen ist, die leider nicht ausgeführt werden kann. |
|Hinweise zur Fehlerbehebung |
| Falls der Fehler in einem nicht modifizierten SAP-Programm vorkommt |
| findet sich vielleicht eine Vorablösung im SAP-Hinweissystem. |
| Falls Sie selbst Zugang zum SAP-Hinweissystem haben, so suchen Sie |
| bitte zunächst mit folgenden Schlagworten: |
| |
| "GETWA_NOT_ASSIGNED" " " |
| "CL_UJQ_QUERY_ENGINE===========CP" bzw. |
| "CL_UJQ_QUERY_ENGINE===========CM004" |
| "CREATE_RESULT" |
| |
|Systemumgebung |
| SAP-Release 701 |
| |
| Applikationsserver... "obdvsep" |
| Netzwerkadresse...... "172.16.5.72" |
| Betriebssystem....... "Linux" |
| Release.............. "2.6.16.60-0.54.5-smp" |
| Hardwaretyp.......... "x86_64" |
| Zeichen-Länge........ 16 Bits |
| Pointer-Länge........ 64 Bits |
| Workprozess-Nummer... 0 |
| Kurzdump-Einstellung. "full" |
| |
| Datenbankserver... "oivsvmw141" |
| Datenbanktyp...... "ORACLE" |
| Datenbankname..... "SEP" |
| Datenbank-User-Id. "SAPSR3" |
| |
| Terminal.......... "oivsvmw140.burda.com" |
| |
| Zeichensatz. "C" |
| |
| SAP-Kernel....... 701 |
| hergestellt am... "Aug 10 2009 21:24:19" |
| hergestellt auf.. "Linux GNU SLES-9 x86_64 cc4.1.2" |
| Datenbankversion. "OCI_102 (10.2.0.4.0) " |
| |
| Patch-Level. 55 |
| Patch-Text.. " " |
| |
| Datenbank............ "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.." |
| SAP-Datenbankversion. 701 |
| Betriebssystem....... "Linux 2.6" |
| |
| Speicherverbrauch |
| Roll.... 16192 |
| EM...... 12569544 |
| Heap.... 0 |
| Page.... 24576 |
| MM Used. 9412632 |
| MM Free. 3153912 |
Edited by: Nils Gröer on Nov 10, 2009 4:31 PM

My problem was solved.
SAP say we can't install BPC ADD-On before active RSA1.
I've rebulit the system:
- Install BW and copy clients if you like;
- Activate RSA1 on the client you're going to use;
- Install BPC Addon;
- Activate Apshell and further BPC installation steps
All things OK.

"No enought room on startup disk for Application Memory" when using the Accelerate Framework

Dear colleagues,
I am running what I know is a large problem for a scientific application (tochnog) a finite element solver that runs from the Terminal. The application tries to solve 1,320,000 simultaneous linear equations. The problem starts when I use the Accelerate Framework as the Virtual Memory size jumps from 142 G to about 576 G after the library (LAPACK) is called to solve the system.It does not do it if I use a solver that does not calls LAPACK inside Accelerate.
The machine is a mac pro desktop with 8 GB of ram, the 2.66 GHz Quad-core Intel and the standard 640 GB hard drive. The system tells me that I have 487 GB available on hard drive.
The top instruction in Terminal reads VM 129G vsize when starting. When I run the finite element application once the LAPACK library in the Accelerate framework gets called, the Virtual Memory (VM) jumps to 563 G vsize.
After a short while, I get the "No enought room on startup disk for Application Memory error"
This is a screen capture of the application attempting to solve the problem using the LAPACK library inside the Accelerate framework: Here are the numbers as reported by the activity Monitor.
Tochnog Real Memory 6.68 GB
System Memory Free: 33.8 MB, Wired 378.8 MB, Active 5.06 GB, Inactive 2.53 GB, Used 7.96 GB.
VM size 567.52 GB, Page ins 270.8 MB, Page outs 108.2 MB, Swap used 505 MB
This is a screen copy of the same application solving the same problemwithout using the Accelerate framework.
Tochnog Real Memory 1.96 GB,
System Memory Free: 4.52 MB, Wired 382.1 MB, Active 2.69 GB, Inactive 416.2 GB, Used 3.47 GB.
VM size 148.60 GB, Page ins 288.8 MB, Page outs 108.2 MB, Swap used 2.5 MB
I can not understand the disparity in the behavior for the same case. As I said before, the only difference is the use of Accelerate in the first case. Also, as you can see, I thought that 8 GB of ram memory was a lot.
Your help will be greatly appreciated
Best regards,
F Lorenzo

The OP had posted this question in the iMac Intel forum.
I replied along similar lines, but suggested he repost this in the SL forum where I know there are usually several people who have a far better grasp of these issues than I.
I would be interested in getting their take on this.
Although, I think you are coming to the correct conclusion that there are not enough resources available for this process, I'm not certain that what you are saying on the way to that conclusion is correct. My understanding of VM is that it is the total theoretical demand on memory a process might make. It is not necessarily the actual or real world demand being made.
As such, this process is not actually demanding 568GB (rounded.) As evidence of that, you can see there is still memory available, albeit quite small, in the form of free memory of 33.8MB and inactive of 2.53GB (the GB for that figure, above, seems like it might be a typo, since for the process when not using Accelerate the reported figure for inactive was 416.2 GB -- surely impossible) and 7.96GB used. The process, itself, is using 6.68GB real memory.
In addition, I question whether the OP has misstated the 487GB free drive space. I think that might be the total drive capacity, not the free space.
My guess is that it is the combination of low available memory and low free drive space prompting this error.
From Dr. Smoke on VM:
it is possible that swap files could grow to the point where all free space on your disk is consumed by them. This can happen if you are very low on both RAM and free disk space.
https://discussions.apple.com/message/2232469?messageID=2232469&#2232469
This gets more to the actual intent of your question...
EDIT: Looks like some kind of glitch right now getting to the Dr. Smoke post.
Message was edited by: WZZZ
<Hyperlink Edited by Host>

Advanced Analysis for Office 1.1 - default workbook location

Is there a registry setting for the default workbook location? We are deploying Analysis for Office via Citrix and would like all users to use the same default workbook. By default, that setting is pointing to a location specific to the current user.
Anyone else deploying this way?
Thanks.

This setting is not managed by a registry key but by a file setting. You will find an xml file in the following folder after installing Analysis for Office:
C:\Users\<user>\AppData\Roaming\SAP AG\SAP BusinessObjects Advanced Analysis\Settings\Document
So to publish a global workbook template you would have to - as part of your rollout - push a global workbook template (excel file) into the users install directory + push an updated version of the xml file from the above file directory into the users Appdata... folder refering to that workbook template file.
Best regards,
Morten Kjeldsted

BPC for Excel - Number Formatting

Hi
Hopefully an easy question !
What do I need to put in the number FORMAT field in the FormatRange to have positive numbers as 12,345 and negative numbers in red and in parentheses (12,345) ? - in excel formatting it would be #,##0,;[red](#,##0,)
Thanks in advance for your help.
Kind Regards
Gav

I assume this is for an EVDRE report. In an EVDRE report, If the word FormatRange is in cell A9, put anEvRng formula in B9, referencing another cell, for example =EvRng(C9). Then format C9 the way you want your schedule to look (font, border, pattern, number format, alignment, etc). I put a number in cell C9 so you can see the results of your formatting.
There are many more formatting capabilities of EVDRE that you can find in the Help file and the BPC for Office guide, but this is the simplest way to do it. You can also do conditional formatting on the cells in the data range.
Greg

Install BPC for Office memory error

Similar Messages

Maybe you are looking for