Install ECC 6.0 and Solution Manager on same server Error (MaxDB/Linux)
I have installed Solution manager on one server and then ECC 6 also in the same server with another SID. during the installation it errored out at phase "SLD configuration" with UME error , J2EE_ADMIN locked etc..we checked the user id and noticed it got locked in ECC 6 system and we unlocked it.
But after the ECC installation the solution manager java engine is not coming up error with "com.sap.security.core.ume.service failed" error. Prior to the ECC installation the Solution Manager J2EE was working.
thanks in advance
Mathew
error in the /j2ee/cluster/server0/log/defaultTrace.1.trc
is as follows
#1.5#00137256A483001E0000001700006F190004163784D40864#1150327614343#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_61##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
When I looked at using jcmon the dispacher is up and the server0 and SDM is down
Similar Messages
-
Config Manager and Operations Manager on same server
May be a simple question, but I have Systems Center Configuration Manager 2012 R2 setup on my Windows Server 2012 R2. I have the SQL 2012 database running on the same server. I'd like to install Operations Manager console/database on the same
server. Can these co-exist on the same machine/database? I found the article from Microsoft (http://technet.microsoft.com/en-us/library/dn281928.aspx) that explicitly says:
DPM Management Server
Operations Manager Management Server
Service Manager Management Server
Service Manager Data Warehouse Management Server
cannot co-exist on the same server, but it does not mention Configuration manager so I'm assuming its OK? Does anyone know for sure?Hi,
Sccm requires a separate sql instance, Cameron covers the topic here:http://blogs.catapultsystems.com/cfuller/archive/2012/05/23/system-center-2012%E2%80%93using-a-common-sql-backend-database-sysctr-scom-scsm.aspx
From a performance and complexity perspective I would strongly advice you to avoid it.
/Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Install Oracle 11i Suite and Oracle 10g on same Server
Hi
We are an Educational firm planning to launching Oracle 11i and 10g.
Can I install both the Oracle 11i E-Business Suite and Oracle 10g on the same Server? If it can What is best configuration for the Server that can I bought?
provide Configuration too.
thanks"However, I do not suggest any windows platform for 11i as that is not so good os for 11i. You may either go far unix or linux" - 140042
That's absolutely right. It is better to have at least two linux/unix machines:
# 1 machine for application server - admin, web, form, concurrent services
# 2 machine for DB server
If you want, you may integrate Oracle apps 11.5.10 (on #1 and # machines) with OracleAS 10g (# machine). -
Install both SAP ECC 6.0 EHP 4 and Solution Manager in C drive
Hi, SDN fellows.
I just want to confirm this.
I am trying to install SAP ECC 6.0 EHP 4 and Solution Manager in C drive. Are these OK, since they both will be installed under the C:\usr folder?
What precaution we need to install these two SAP components in the same drive (C)?
I am installing both components in MS Window Server 2008 R2 SP1 with MS SQL Server 2005 SP3.
Thanks,
KCHi, Nick.
Sorry, I missed the "IDES". I am installing SAP ECC6.0 EHP4 IDES system for training purpose within the organization.
I am referring to the Installation Guide - SAP ERP 6.0 EHP Ready ABAP on Window MS SQL Server (Based on NW 7.0 incl EHP 1). All downloaded installation files are from: EHP4 for SAP ERP 6.0/NW7.01 --> IDES --> --> Widnows Server --> MS SQL Server.
The OS is installed in C drive.
I have allocated 250GB in C drive and 200GB in D drive from SAN.
For IDES system (I know it is similar to the standard ECC), is it also recommended to install in D drive (separate from the OS)?
In this case, should I install both Solution Manger and IDES in D drive?
Or what is the best combination where I should install these two systems?
Thanks,
KC -
EP and Solution Manager Via Webdispatcher
Solution Manager Via Webdispatcher
Dear All,
We have installed the Webdispatcher 7.4 and did the SSL setup and maintained necessary parameters to access our Portal and ECC systems from internet and its working fine for indepedent Java and ABAP stack.
Now when we are trying to access the solution manager via webdispatcher using webgui, it opens but when its calling the webdynpros like solman_setup, the page is not openning. The same case is in our portal system also, when its calling the webdynpro of backend system its not openning.
During our analysis we found the urls are called from the local machine to the backend host (ABAP) directly and there is no where its communicating the webdispatcher.
Can you please guide me what kind up setup can be done to access the Portal and solution manager complete functionality via webdispatcher.
I have checked many posts on the forum and was totally confused on the solution approches. So trying to filter it down to do a proper setup which is feasible to our landscape and infra team.
FYI Our Solman is on 7.1 SPS10 and portal is on 7.4, OS windows
Looking forward for your valuable inputs
Thanks & Regards,
SatyabratThanks Samuli,
I tried it..its working for solman but in my ECC (NW 7.31) its not working for web dynpros. Its going to hostname:8001 port and not redirecting to webdispatcher.
Pleae let me know if I am missing something.
Thanks & Regards,
Satyabrat -
Pagefile for SAP Erp2005 and Solution Manager 4.0
Hi all,
I've installed SAP ERP2005 and Solution Manager 4.0 on the same server with Windows 2003 Standard 32bit.
The RAM on this server is 3325MB.
How many paging file I must configure???
At the moment I configured the pagefile size as defined in the installation guide:
1 RAM + 8GB that is 12285MB.
Is it correct????
For both instance I set the PHYS_MEM parameter to 2328 (70% of the RAM)...is it correct??
P.S. How to calculate the [BE] parameters??
[BE] = maximum possible number of user calculated from the size of physical main memory
Thanks in advanced
MorenoI agree with Yaroslav,
you should NOT set those values:
em/initial_size_MB |---- [PM] |---- [PM] |Mbyte |
|--- em/max_size_MB |--- 20000 |--- 100000 |Mbyte |
| em/address_space_MB |----- 512 |----- 4096 |Mbyte |
|---- ztta/roll_first |------- 1 |------- 1 |Byte |
|--- ztta/roll_area |--- 2000000 |--- 3000000 |Byte |
| ztta/roll_extension | 2000000000 | 2000000000 |Byte |
| abap/heap_area_dia | 2000000000 | 2000000000 |Byte |
| abap/heap_area_nondia | 2000000000 | 0 |Byte |
| abap/heap_area_total | 2000000000 |[PM]*1048576 |Byte |
|- rdisp/ROLL_MAXFS | [BE] * 100 | [BE] * 100 |8KB Block |
|--- rdisp/ROLL_SHM | [BE] * 100 | [BE] * 100 |8KB Block |
|--- rdisp/PG_MAXFS |--- 32768 |--- 32768 |8KB Block |
|----- rdisp/PG_SHM |
so... that [BE] value is not to be used. -
Why do we install Solution Manager on Different Server
Hi Everybody,
Please if anybody can help in clearing the doubt that why it is advisable to install Solution Manager on Different Server.
Thanks in advance!!
PawanThanks Juan. Got the answer.
Infact i was reading somewhere and got these points -
SAP Solution Manager is designed to run in a central u2018monitoringu2019 system at the customer site where all other SAP systems and mySAP solutions (satellite systems) are connected:
u2022 The entire Solution Landscape can be documented (u2018living documentu2019) in a central system (in fact several Solution Landscapes can be managed)
u2022 SAP and Non-SAP Systems can be modeled
u2022 All core business processes can be graphically assigned to all available productive systems in a solution landscape
u2022 All connected SAP systems can be monitored by the central SAP Solution Manager system
u2022 Satellite systems submit data via RFC / agents into the central system
u2022 The system with the SAP Solution Manager installed has a connection to SAPNet R/3 Frontend and the SAP Service Marketplace to communicate with SAP Support Back Office
The SAP Solution Manager serves as a platform that includes several features in one application. The strength of the SAP Solution Manager is the strong integration into the mySAP.com Solution and the optimal knowledge transfer SAP-Partner-Customer including central monitoring features, mainly focusing on core business processes. However, additional features and tools (Support Desk, SAP Note Assistant, MS NetMeeting,u2026) that are integrated in the SAP Solution Manager, also play important roles within a customeru2019s solution management.
It is important to understand that it is not necessary or useful to always have all integrated SAP Solution Manager components installed on one system. For example it is possible to install the SAP Solution Manager on one system and connect to another System where the Support Desk is installed. The SAP Solution Manager then only serves as a portal to jump to the included Support Desk system without notice.
If the customeru2018s main focus is the management of core business processes through service roadmaps and monitoring via SAP EarlyWatch Alert, Service Level Management (reporting) and so on, SAP recommends the SAP Web Application Server as the best choice for the SAP Solution Manager installation as it is also the platform for the SAP Solution Architect and has fairly small hardware requirements. -
Can anyone explain difference b/w Schedule Manager and Solution Manager
Hi,
Is there any difference b/w schedule manager and solution manager or both are same. Plz do reply at the earliest.
thanks,
sureshDear Suresh,
Schedule Manager (SCMA):
Schedule Manager automates your routinue task. It facilitate the definition, scheduling, execution, and review of tasks that are executed on a regular basis, such as period-end closing.
Solution Manager - The SAP Solution Manager supports you throughout the entire lifecycle of your solutions, from the Business Blueprint thru configuration to production operation. It provides central access to tools methods and preconfigured content, that you can use during the evaluation, implementation, and productive operation of your systems.
Implementation of the mySAP Business Suite
· All phases of the implementation project (Business Blueprint, Configuration) are performed centrally in the Solution-Manager system.
· Central project documentation repository in the Solution Manager
· Integrated Project Administration allows you to manage planning schedules, human resources and other project data.
Customizing Synchronization
· The Customizing Scout, with which you can compare customizing in various SAP components, e.g. an ERP system with SAP MDM
· The Customizing Distribution, with which you can synchronize customizing in various SAP components.
Test
· You can use the Test Workbench to organize and perform tests at the end of a project phase.
· Reuse of the project structure for process-oriented tests
Global rollout
Integrated authoring environment, with which customers and partners can create their own templates, which they can reuse in subsidiaries, e.g. in a global rollout
E-Learning management
Creation of training material and learning maps (computer-supported self-tuition courses) to train end users after the implementation of new functions
Solution Monitoring
· Central system administration
· Analyze your system landscape with Service Level Reporting
· System monitoring in real time
· Business Process Monitoring
Services
Access to programs and Services, which help you to monitor and optimize the performance and availability of your system landscapes, and minimize your operational system risks
Service Desk
Solution support with workflow to create and handle problem messages
Change Management
Management of change requests, with workflow for the monitoring and audit of changes and transports in your system landscape, with the Change Request Management.
Regards,
Naveen. -
User synchronization issue between Active Directory and Solution manager.
Requirement:
Synchronize the users between Active directory and solution manager system.
<u>What we did:</u>
1. Created RFC connection (LDAP_RFC) for LDAP connector.
2. Created new LDAP connector that utilize the RFC (LDAP_RFC).
3. Created new logical LDAP Server(CUA).Here we have to maintain the connection
details to the physical directory.
4. We maintained the communication user that is used by the LDAP connector to bind the LDAP Directory Server.
5. In transaction LDAPMAP specific SAP data fields, we mapped to the desired
directory attributes.
6. Testing from LDAP transaction working fine. We are able to see the attributes and
values from Active directory.
<b><u>Issue:</u></b>
When executed the program RSLDAPSYNC_USER for user synchronization from t-code se38 with below selection .
LDAP Server = CUA (created earlier)
LDAP Connector = LDAP_RFC (RFC connection created created ealier)
In the tab: (Object that exist both in the directory and in the Database:)
Selected: Compare Time Stamp.
In the tab: (Objects the only exist in the Directory.)
Selected : Create in Database.
In the tab(Objects that only Exist in the Database:
Selected: Ignore Object.
Result from the report shows that connection to LDAP server is fine and 0(zero) objects in Directory.
The program does not create any new user in the Solution Manager system.
Any help on this issue greatly appreciated.
Thanks & Regards,
Harishwhere did you see this error ? is there anymore details.
i think the account you are using for Sync does not have Replicate Directory Changes permission in AD. follow below article and give Replicate directory changes permission.
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Thanks, Noddy -
Solution Manager 4.0 SR2: Error during step 1 installPolicyArchive
Hi,
I faced a really annoying problem in first step of Installation of a SAP Solution Manager 4.0 SR2 on Suse Linux Enterprise Server 10.
The Installation hangs in Phase 1 installPolicyArchive.
I think i have passed all prerequisites before starting the Installation.
Perhaps for help:
i set the Environment Variables as follows:
JDK_HOME=/usr/lib/jvm/java-1_4_2-sun-1.4.2.11/
JRE_HOME=/usr/lib/jvm/java-1_4_2-sun-1.4.2.11/jre
JAVA_BINDIR=/usr/lib/jvm/java-1_4_2-sun-1.4.2.11/bin
JAVA_HOME=/usr/lib/jvm/java-1_4_2-sun-1.4.2.11/
SAPINST_JAVA_HOME=/usr/lib/jvm/java-1_4_2-sun-1.4.2.11/
JAVA_ROOT=/usr/lib/jvm/java-1_4_2-sun-1.4.2.11/
As you see Java Version is java-1_4_2-sun-1.4.2.11.
The Error in sapinst.log is as follows:
ERROR 2009-03-03 15:58:44
FSL-00001 System call failed. Error 2 (No such file or directory) in execution of system call 'realpath' with parameter (/usr/lib/jvm/java-1_4_2-sun-1.4.2.11/jre/lib/security/local_policy.jar), line (346) in file (syuxclink.cpp).
ERROR 2009-03-03 15:58:44
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-03-03 15:58:44
FCO-00011 The step installPolicyArchive with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|1|0|NW_getJavaHome_jcePolicy|ind|ind|ind|ind|0|0|installPolicyArchive was executed with status ERROR .
Can anyone help me solve the problem?
Thanks beforehand and Best Regards,
C. Peifer> I'm on 32 bit
Ok - then the JDK correct.
sapinst searches for a policy file, is the given filename there?
/usr/lib/jvm/java-1_4_2-sun-1.4.2.11/jre/lib/security/local_policy.jar -
How to Install R/3 and CRM on the same Server?
Hi All,
I would like to install R/3 and CRM on the same server (as the load is less). I know how to install them seperately.
I would like to have some instructions how to have them installed on the same server.
Thanks in advance.
Regards,
VijayAs Sunil explained - MCOD (or) you can think to have 2 differnt DB SID's as weel 2 different SAP SID's. By default 1st Installation takes Listener Name as LISTENER & port 1527 when you are doing second Oracle installation use another lister name as LISTENER002 & give port 1526 ( for example).
MCOD will be the best option to unplug from oracle instalation requirement but - think of future plans. even it can be any size business don't think to do MCOD with SAP Business System like R3 .
Becuase qwe may have different requirements from the Business / functionla Team for refreshing / building the development system with a copy of production system - don;t get confused there are Techniques for Refreshing a Development Instance with production system also.
Any how you have to take decission to go with MCOD (or) not . I also request SUNIL to comment on MCOD installations with R3 system .
But I beleive Sascha Version is wrong - i can have multiple application servers of differnet products on single Box if my OS supports.
as application servers will have 3 individual mount point which points to different system
<Central Instance>:/sapmnt/<SID>/global
<Central Instance>:/sapmnt/<SID>/prfoile
<Central Instance>:/sapmnt/<SID>/exe
each SID NFS mount point can point to different sever & i can multiple application server of differnt SAP Products on 1 BOX.
Trans directory is problem - but it does not require either for installation (or) for runningAS instance . -
Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."
Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.
-
I did install Adobe Premiere 11 and I cannot get it open, error 126
I have Windows 8 Pro / 64 bit
I did install to day:
Adobe Photoshop 11 and
Adobe Premiere Elements 11
When trying to open (load) Adobe Premiere Elements 11 video editing
there is an error
ERROR
LoadLibrary with error 126
Specified part cannot be found
I had same problem with Adobe 8 and same now with Adobe 11
What to do
or do I return product back, refunding money?
(I did buy it to day)
Greetings
kariHei,
First: Thank you:
I succeed, finally, after few uninstalling/ installing driver and software
/Adobe Pre 11: in differennt order:
AMD/Ati monitor driver run to dating new correct one did not help,
( I had Win7/64 running (pure install with all software), Win8/64 changed
plenty drivers to "her" own General Drivers (Microsoft), what is wrong!!!! )
so I delete monitor driver twice!! First delete did not help, so I delete
again all and run hard disk defrag, re delete driver and forced system to
load AMD/Ati win8 driver and reboot and re install Adobe Premiere 11 again
and after that, now call for error 126, so software works also in video
part.
Thank you help
even my explain may not be so clear, but now ok
(Must say, anyway, plenty "rabbish" is in Windows8 now in, when looking in,
but too sensitive to delete similarities away, when the order of
similarities (what is a last one) is not clear and it is not same order
with Windows in different installations)
Now
AsusTek informs for 3 year old motherboard, no win8 correction coming,
suggest to delete softwares, in question, huh huh.
It seems Win8 is also now working properly like when I open from Start
window Worktable, appears an error AsusSetup does not support this
operating system: WNT_6.2P_64_MCE
So:
Windows 8 Pro /64 and
Adobe and
Asus
are still far from pre-co-opertion for a client
Thank you Adibo, now, first time I did get a proper assistance for software
problem
kari
2012/12/12 Bill Hunt <[email protected]>
Re: I did install Adobe Premiere 11 and I cannot get it open, error
126
created by Bill Hunt <http://forums.adobe.com/people/the_wine_snob> in *Premiere
Elements* - View the full discussion<http://forums.adobe.com/message/4915366#4915366 -
CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
Reply
Dear Friends,
I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
at this time my database was into another machine.
then i installed oracle 9i database into the same machine
(as the oracle 9ias was installed)
at the instalation of oracle 9i database one error comes
and shows that Agent configuration Assistant Installation
fail.
but After installation of database it work properly.
there is no problem.
but when I try to run from through web(by using oracle 9ias)
it gives Internal error(500).
i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
With regards
Siddharth Singh
[email protected]Hi James,
Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
If yes what is the version of RH Linux you were using ?
Any docs for that ?
[email protected]
Regards
Amudharasu -
Installation of EBS 12.1 and Database on the same server
Hi,
Due to resource crunch, I would like to do new installation of EBS 12.1 and Database on the same server where already EBS 12.1 and Database installed.
I have one server where EBS 12.1 and Database installed (Single node installation).
Now I want to create another environment for other purpose (another test env.). But I don't have another server .
So Can I start new installation of EBS 12.1 and database on the same server ?
I have enough space and memory on server.
Are the installtion conflict with each other ? any implications happen on the first environment ?
I want my first environment run fine without any prob., after installing EBS and DB on the same server.
Please guide me.
Regards,
Sanjay PatelSo Can I start new installation of EBS 12.1 and database on the same server ?
I have enough space and memory on server.Yes you can as long as you have sufficient resources.
Are the installtion conflict with each other ? any implications happen on the first environment ? If you install in different ORACLE_HOMEs you should be OK.
Thanks,
Hussein
Maybe you are looking for
-
I just purchased a new iMac. My iTunes account is missing a ton of music and only contains "purchased" music. When I try to load music from my ipod to match my imac it only asks if i'd like to sinc my ipod with my account. How do I access my entire l
-
MR8M creation of new reason code and editable description
HI, We want to create new Reason code in MR8M transaction. After creation of reason we want to editable reason description when we select this. Please suggest me. Thanks Shital
-
Hi All.. I finished my planning book and version, but when I try to run Heuristics on a product XYZ at location ABC, I get the following message u2013 I have done all the consistency checks. On further analysis, the error is function module/SAPAPO/DM
-
Why can't I find an Existing Contact in Frequent Contacts?
I am using the following function to find a contact in my frequent contacts and it dosn't work. Any ideas why this doesn't work? Is my syntax wrong? Thanks!! //cFilter is parsed to equal the following: (<First Name> MATCHES "John" AND <Last Name> MAT
-
Transporting - VOFM Routine to Quality Server
Dear Experts, I have created a routine in VOFM transaction named 911 (Formula-Condition Base Value) For the assignment of Tax Procedure in 200 Client. For the testing and the assignment purpose we used SCC1 Transaction to transfer the assignment fro