Install for load

Hello,
I work with GemXpresso pro R3 and I want to upload my applet on the card.
I begin to write a script but I have a problem with the install for load command.
According to the gp specifications, the data field must contain the appplet aid length, the applet aid, the security domain aid length and the security domain aid.
Is it right or anything more?

If we are reading on the same spec, then you would have seen this,
Mandatory 1 Length of Load File AID
Mandatory 5-16 Load File AID
Mandatory 1 Length of Security Domain AID
Conditional 0-16 Security Domain AID
Mandatory 1 Length of Load File Data Block Hash
Conditional 0-n Load File Data Block Hash
Mandatory 1 Length of Load Parameters field
Conditional 0-n Load Parameters field
Mandatory 1 Length of Load Token
Conditional 0-n Load Token
Above is the data field in install for load command.

Similar Messages

How to calc load parameters field for INSTALL for LOAD command

Hi everyone ,
I'll appreciate it if anyone could help me to find out how to calculate load parameters field for Install for Load Command .
(which tags and parameters I should use to make this field )
Best Regards,
SHKas

SHKas wrote:
I'll appreciate it if anyone could help me to find out how to calculate load parameters field for Install for Load Command .
(which tags and parameters I should use to make this field )Hi SHKas,
The field is deffined in the GP card spec 2.1.1 under 9.5.2.3.6 INSTALL [for load] and INSTALL [for install] Parameters. The section of text explains what each field is and the tag to use to encode. Each value is a two byte short.
Cheers,
Shane

INSTALL[for load] command without Security Domain AID

Hello all,
I have a question for the INSTALL[for load] command.
The Security Domain AID is optional field, so I'm wondering if I didn't specify the AID, then which Security Domain performs the INSTALL[for load] command?
Thanks,
Julie.

Which ever one you are sending your APDU commands to. Which SD did you select ? Usually, the default applet is the ISD, so the commands are going to that applet.

INSTALL [for install] error

Hi,
I am currently writing my own cap uploader, but am currently getting in the INSTALL command. My current steps are:
Authenticate Secure Channel // reply 90 00
80 E6 02 - Install for Load command // reply 90 00
80 E8 - Upload data block // all give reply 90 00
but here:
80 E6 0C // install for install command - reply is 69 85
I know the 69 85 error is "Conditions of use not satisfied", but has anyone got any ideas of what I could be doing wrong here, as all my other commands get a response on 90 00?
Cheers,
Dan

Are you sure that the install-method of the applet that you are loading is correct?
As the install-method of your applet is invoked during the INSTALL [for install] command, an exception might be thrown during the execution of this method, which might be mapped to this common error.
The Javacard we are using here (JCOP from IBM) throws an ISOException with reasoncode 0x6A80 (WRONG DATA) when an exception is thrown during the execution of the install-method of an applet.

Help: Algorithm for Load File Data Block Hash?

Hi guys
I would like to understand the algorithm of a field in INSTALL for LOAD command. It is "Load File Data Block Hash". I'm concerning about it in JCOP tool + Eclipse
(All I want to to is designing the new INSTALL for LOAD command, and I want to imitate JCOP tool)
Can I use DES algorithm for this field?
Thanks in advance.

The load file data block hash is described in GP Card Spec v2.1.1 sections 6.7.6.1, 7.7.7 and C.2 all titled Load File Data Block Hash.
The hash is a SHA-1 hash of the load file data block.
Cheers,
Shane

MacBook Pro 2011- Allowed updates to install for iTunes software and Microsoft office (I think). After rebooting, computer wouldn't progress past grey apple screen with loading circle.

I have a MacBook Pro 2011. I allowed updates to install for iTunes software and Microsoft office (I think). After rebooting, computer wouldn't progress past grey apple screen with loading circle. No progression bar ever appeared. It just sits and spins. I tried rebooting with Command + Option + R + P and hearing the chime twice....this did not work.
I also tried Command +Option+R which took me to internet recovery. From there, I chose reinstall Mac OS X Lion 10.7 but it says my hard drive is locked so I wasnt able to select it. What do I do???? Help! I don't want to lose my files and it doesnt appear that I've used Time Machine Back Up.

macbookpro2011ISU wrote:
I also tried Command +Option+R which took me to internet recovery. From there, I chose reinstall Mac OS X Lion 10.7 but it says my hard drive is locked so I wasnt able to select it.
I you upgraded to OS X 10.8, then use RecoveryHD by holding Command R at boot time (no option) and reinstall OS X over itself that way so your installing Mountain Lion.
Also Disk Uility can be used to Repair the Macintosh HD parttion.
Also you can use that RecoveryHD to format and install OS X onto a external drive, then option/alt key boot from it and access your files on the non-booting internal drive before erasing, reformatting and reinstalling OS X fresh.
Create a data recovery/undelete external boot drive
Most commonly used backup methods
..Step by Step to fix your Mac

Where did the "Stop" button go on the Navigation Bar in ff4? It isn't included in the Customize box. Is there anyway to install the "Stop" button for loading web pages or is this option compeletly gone from Firefox now?

Just installed upgrade to Firefox 4.0. Where did the "Stop" button go on the Navigation Bar. I checked the Customize dialogue box and it isn't included. Is anyone else missing it? Is there anyway to install the "Stop" button for loading web pages or is this option completely gone from Firefox now? It was a very helpful button and allowed us users to stop a web page and move on if it wasn't what we needed.

In Firefox 4 by default the Stop, Go and Reload buttons are combined and attached to the right hand edge of the location bar.
When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
If you want separate buttons, right-click on a toolbar and choose Customize, you can then drag and drop the stop or reload buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar

My ipad automatically tried to update skype to version 4.1.1 It has been showing installing for 3 days and says waiting on the icon. It will not allow me to delete the app. When someone calls me on skype it rings but turns off as soon as I try to answer.

My ipad automatically tried to update skype. It has been installing for 3 days and the message waiting is on the icon. I am unable to delete skype to try and re install. I have gone to the licence page but there is nowhere that I can agree the terms as it is still trying to load.

delete the app on itunes (on PC) then download it again.

Mapping in Transformation file for loading infoprovider

Mapping in transformation file for load from infoprovider:
The requirement is : if Account of BW starts with 70XXXXXXX then use char1 if Account of BW starts with 12XXXXXXX then use char2 in BPC dimension 2.
So, in the transformation file for a load from an infoprovider we want for a dimension to use the data from a certain BW characteristic based on the characteristic Account.
For example if the account start with 70 then use for a certain bpc-dimension u201Cdetailu201D the characteristic of 0COUNRTY should be used, if account start with 2 the char X should be used etc..
Following in the transformation works but the issue is that we have to specify all the accounts individually (+100 accounts in the statement which is not feasible):
BPC_detail = *IF (BWACCOUNT = str(70000010) then 0COUNTRY;str(NO_DETAIL))
Where BPC_detail is the dimension in BPC and BWACCOUNT is the characteristic in BW.
Following statement does not work: there is also no documentation available how to do this:
BPC_detail = *IF (BWACCOUNT(1:2) = str(70) then 0COUNTRY;str(NO_DETAIL))
Is there a solution/statement that fulfills this requirement for the load of an infoprovider?
( so similar to what you can do with the load of a flat file like for example: Entity=IF(col(1,1:1)=U then SEntity;*col(1,1:1)=Z then *col(1,3:6); *STR(ERR)) )
Rgds

Hi,
Install process chain /CPMB/LOAD_INFOPROV_UI from BI Content as follows:
1.Enter Tcode RSA1
2. In the left navigation bar, click 'BI content'
3. Select process chain and double click "Select Objects".
4. Select the process chain /CPMB/LOAD_INFOPROV_UI.
5. Click 'Transfer Selections' button.
6. On the right pane, install objects from BI Content.
7. Enter Tcode SE38.
8. Input program name ujs_activate_content and click to run.
9. Only select option 'Update DM Default Instructions'.
10. Execute program.
Hope it helps..
Regards,
Raju

Application Insights for load testing in VS 2013, Azure Preview or Visual Studio Online?

I'm trying to get some clarification on which version of application insights to use to get performance counters from application insights for my azure cloud service for load and performance testing purposes.
So far, its not be clear what the differences between the two versions are, after deploying first the Azure Preview version, I attempted to set up performance counters using application insights but was shown an error because my visual studio online account
did not have an associated application insights instance.
Is it possible to get performance counters using AI for load testing using the Azure Preview version? If so, how? If not, is that planned as a new feature or will performance counters for VSO cloud based load testing have to be used when support for the
VSO version of application insights is eventually dropped?
Thanks,
Luke

Hi Alex, thanks for your response. I do have an Azure account, and have tinkered with AI in Azure Preview. My question was more about what the differences between the VSO and azure preview versions of AI are.
When I initially deployed AI to the azure portal and tried to run load tests from visual studio (cloud load tests, that is) I could not. Its possible I had made a mistake in configuring the azure version of application insights though. Strangely enough,
I actually do still see application insights data in the azure preview portal after I removed the newer AI version and installed AI 1.3.
To clarify my question, is it or will it be possible to run cloud based load tests (using visual studio online or another integrated service) against a azure web role deployed with application insights for azure and get performance counters of the system
under test via AI? To do that, will I also have an application insights application in the visual studio online account (similar to how I do now with the VSO version of AI), because that seems to be a requirement to load performance counters from application
insights within visual studio.
Thanks and sorry if I misunderstood your answer.

Self Service Password Registration Page taking more time for loading in FIM 2010 R2

Hi,
I have beeen successfullly installed FIM 2010 R2 SSPR and it is working fine
but my problem is that Self Service Password Registration Page taking more time for loading when i provide Window Credential,it is taking approximate 50 to 60 Seconds for loading a page in FIM 2010 R2
very urgent requirement.
Regards
Anil Kumar

Double check that the objectSid, accountname and domain is populated for the users in the FIM portal, and each user is connected to their AD counterparts
Check here for more info:
http://social.technet.microsoft.com/wiki/contents/articles/20213.troubleshooting-fim-sspr-error-3003-the-current-user-account-is-not-recognized-by-forefront-identity-manager-please-contact-your-help-desk-or-system-administrator.aspx

Mt.Lion operating system install down load on a flash drive. How would go about doing this.

Looked up making my own install for Mt. Lion and found some related information. Use of a flash drive is perfered. I can down load from apple store, have allready. Any sight information you can suggest, or how to?

http://www.macworld.com/article/161069/2011/07/make_a_bootable_lion_installer.ht ml

[svn:osmf:] 15972: ChromeLibrary: adding rudimentary support for loading plug-ins defined in XML.

Revision: 15972
Revision: 15972
Author:   [email protected]
Date:     2010-05-08 07:31:24 -0700 (Sat, 08 May 2010)
Log Message:
ChromeLibrary: adding rudimentary support for loading plug-ins defined in XML.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/application/ChromeApplication.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/configuration/PluginsParser.as

rnair wrote:
I am trying to install Oracle 11g R2 on my windows 7, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?<snip>
the error has nothing to do with DBCA. DBCA was simply the last in a long string of victims.
Go back and read the instructions where you downloaded the install media. They state that the TWO zip files you download must be unzipped into the same directory.

Configuring 2 NICs for Load sharing

I have 2 NICs installed in my desktop system. I need to establish a TCP/IP connection through one NIC With a server. At the same time I need to load balance the packets through both the NICs.
The above setup incolves coding in Windows. Also the implementation involves programming the dynamic routing table for packets to be distributed(for Load Balancing).
Also Wont there be any packet loss instances while drivin the packets through the NICs.
Any ideas and Suggestions on the above query is very much welcome.
Please elaborate the processes if possible.
Thank you.

Hi,
I'm guessing that your network cards will use some kind of channelling to load balance at layer2 and both cards will be treated as one logical link to the network. In Cisco speak this is called Etherchannelling however in other vendors speak it can be called trunking.
You will have to find out if this is true and then set up channelling using the correct method between your PC and switch. Unless you are using 3750 switches in a stack, i think both NICs will have to be connected to the same switch, both these ports will have to be put into the same etherchannel.
Cisco switches support the dynamic creation of channels using PAgp or LACP, my guess is that your NICs will either support LACP as PAgp is Cisco proprietary or it won't support the dynamic creation of a channel at all.
Have a look through the documentation and see if i'm on the right track, if so report back and if you need further help i can show you how to configure this on the Cisco switch.
HTH
PJD

CF8/JRun4 Cluster for Load Balancing

Does anyone have an example of how to set up a CF8/JRun4
cluster for load balancing?
I have three servers:
x004 - Linux - Apache2 (10.0.0.54,10.1.0.54)
x020 - Linux - JRun4/CF8 (10.0.0.70,10.1.0.70)
x021 - Linux - JRun4/CF8 (10.0.0.71,10.1.0.71)
Every server in our network has two network cards. One
network card is attached to 10.0.x.x which has a gateway to the
internet and runs at 100Mbps and is firewalled, and the other is
attached to 10.1.x.x which runs at 1Gbps and is internal with no
gateway. I'm trying to set it up so web traffic arrives on
10.0.0.54 into Apache and mod_jrun20 bootstraps a cluster named
STST using 10.1.0.54 which consists of STST_x020 coldfusion server
running on x020 and STST_x021 running on x021. I want the
communications between JRun4 on x020 and x021 to occur on the
10.1.x.x network and eventhough JRun and ColdFusion will only use
the 10.1.x.x network I still need the 10.0.x.x network card
attached for other purposes which require a gateway. I have
installed JRun4/CF8 about 10 times already and it seems I have no
control over what network JRun4 clusters on... sometimes it will
communicate on one, sometimes the other and without being able to
set which network is being used there always seems to be "network
error" on at least one of the two CF8 servers. I was able to get
everything working fine by disabling the network cards on the
10.0.x.x network and re-installing everything... but as soon as I
added the network cards back the whole thing was broken again.
How is this supposed to work? Most of the examples are either
no clustering or clustering on the same machine with Apache running
on the same box... I don't see any clustering across machines
examples.
How do I install a connector on a web server which doesn't
have JRun on it and get wsconfig to connect to a multi-machine
cluster when wsconfig only accepts a single IP address as a host
and the cluster is not listed?
How do I get JRun to bind to a specific network card?
Does this work if I choose a J2EE server other than JRun?
Any help anyone can provide is greatly appreciated. I'm
getting close to giving up which means staying on the non-clustered
environment and figuring out how we can deal with scalability by
switching to something else.

The article at
http://www.adobe.com/go/1e8e9170
is specific to configuring two or more cluster nodes that reside on
separate networks, e.g. 10.0.1.0/24 and 10.0.2.0/24. (The article
doesn't state it, but you can only use unicast peers if your
cluster nodes host a single instance of JRun or multiple instances
of JRun in the same cluster domain. When performing unicast
discovery, JRun looks for all Jini groups and not just the cluster
group.)
Anyhow, that's not your problem. The simplest solution is you
haven't enabled the jrun.servlet.jrpp.JRunProxyService service. I'm
most familiar with the Windows version of JRun, but I'm assuming
the directory structure is similar across platforms. In
<jrun_root>/servers/<name>/SERVER-INF/jrun.xml, set the
deactivated attribute of the jrun.servlet.jrpp.JRunProxyService
service to false and restart JRun. You should now see JRun
listening on the appropriate port. (The default for the first
manually created instance is 51000.) You can limit the proxy
service to a single interface using the interface attribute.
If you have enabled the proxy service, verify your security
settings in <jrun_root>/lib/security.properties. It's usually
best to limit access to specific hosts. Comment out the
jrun.subnet.restriction parameter and set the jrun.trusted.hosts to
the IP address of your web server, e.g. 10.1.0.54.
Forcing all JRun processes/services to listen on a single
interface isn't difficult, but it does require modifying quite a
few configuration files by hand. If you need assistance with that,
I can elaborate.
Configuring the JRun module under Apache is pretty
straightforward. If you're not using virtual hosts, it's very
simple. If you are using virtual hosts, it's still simple, but your
JRun configuration can be virtual host-specific.
On your Apache server, you'll want to create a directory
structure for the JRun module. I'll assume
/opt/jrun/lib/wsconfig/1, but you can use anything you want. Once
the directory structure is created, extract the appropriate JRun
module from wsconfig.jar to the new directory. You're most likely
interested in the Apache 2.0 module,
wsconfig.jar/connectors/apache/intel-linux/prebuilt/mod_jrun20.so.
Let's assume you've extracted the module to
/opt/jrun/lib/wsconfig/1/mod_jrun20.so. Your Apache service account
should have read, write, and execute permissions on the
/opt/jrun/lib/wsconfig/1 directory.
The JRun module configuration is normally appended to your
current httpd.conf file by wsconfig. Here's a sample configuration:
LoadModule jrun_module
"/opt/jrun/lib/wsconfig/1/mod_jrun20.so"
<IfModule mod_jrun20.c>
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ssl false
JRunConfig Ignoresuffixmap false
JRunConfig Serverstore
"/opt/jrun/lib/wsconfig/1/jrunserver.store"
JRunConfig Bootstrap 10.1.0.70:51000
#JRunConfig Errorurl <optionally redirect to this URL on
errors>
#JRunConfig ProxyRetryInterval 600
#JRunConfig ConnectTimeout 30
#JRunConfig RecvTimeout 30
#JRunConfig SendTimeout 30
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr
.cfswf
</IfModule>
You may also want to update your DirectoryIndex directive
with an appropriate index page, e.g. index.cfm.
After the first request to a page handled by the JRun module
is received, the module will query the boostrap server,
10.1.0.70:51000, for a list of cluster peers. If you've configured
your cluster correctly, a line similar to following will be written
to /opt/jrun/lib/wsconfig/1/jrunserver.store:
proxyservers=10.1.0.70:51000;10.1.0.71:51000
You can create/edit this file manually as well.
Unfortunately, the bootstrap option only accepts one server. If
your bootstrap server is down, the JRun module will use the values
in jrunserver.store directly, if the file exists.
Here's a complete list of JRun module options:
metrics *
debugger *
ssl *
verbose
traceflags
serverstore
bootstrap
errorurl
apialloc
ignoresuffixmap
proxyretryinterval
connecttimeout
recvtimeout
sendtimeout
sslcalist
Options flagged with an asterisk can only be configured at
the Apache server level. All other options can be configured at the
server level and/or the virtual host level. The usage of these
options is in the JRun documentation, and the JRun module source
code is included in wsconfig.jar. Keep in mind that versions of the
JRun module shipped prior to ColdFusion 8 were coded to assign the
connecttimeout and sendtimeout options to the socket connection
timeout. Whichever option appeared last in your configuration ended
up as the final value. This has been fixed in ColdFusion 8 and
presumably the next release of the JRun updater.
I think that's a good start. If you need more information or
can't find what you need in the JRun or ColdFusion documentation,
let me know.
If you're looking for resiliency, I highly recommend
expanding your configuration to include a second web server and a
hardware load-balancer (preferably one that supports redudancy via
multiple paths and devices, e.g. devices from Cisco, F5, or Foundry
Networks). Often, however, running Apache on the ColdFusion
server(s) provides adequate performance, and round-robin DNS
records coupled with the ability to update DNS quickly in the event
of a failure may be all you need for load-balancing and
failover.

Install for load

Similar Messages

Maybe you are looking for