Install Light Switch on Build server

I
am trying to install Light switch in windows MS build server and it seems to be looking for Visual Studio 2012?
Does
that mean, we will have to install complete visual studio 2012 in our ms build servers? we don't want to do that. Is there any work around available?
I Install
“Visual Studio Lightswitch 2012 Server Runtime and Local SQL” via Web Platform Installer but still it is looking for more dll and packages.
Thanks
Gourav

Hi,
If you want to create lightswitch application, you need install visual studio.
When you install visual studio you could install lightswitch package like below picture shows you.
Besides, you could also follow below set up video to insall it:
https://www.youtube.com/watch?v=tWtwvOSaqJY&index=1&list=PLDF16C2F1E1D066C0
You could check below document to understand more about lightswitch.
https://msdn.microsoft.com/en-us/vstudio/htmlclient.aspx

Similar Messages

Install Forms and Reports builder 11g without WebLogic Server

Hello Everybody,
Presently to install Forms and Reports builder 11g on a PC for developers, we need to install WebLogic Server prior to that.
For this, we need lot of resources. Hardware, to download big software bundles, memory resources, etc...
If we have a solution like *"Forms and Reports builder 11g and its tools as stand-alone distribution from Fusion Middleware technologies"* ........ no words from me.
Do you have a solution to install Forms and Reports Builder 11g without WebLogic Server?
Regards
murali krishna

hi
check out the following link.
Forms/Reports 11g Builder without WebLogic
sarah

TFS and Build Server 2013 with CNAME

Hello Team
As we have TFS 2013 with Update 3 on windows server 2012 and another windows server 2012 machine have build server installed. It is working well with machine name and build is running properly.
Once i tried to change the machine with CNAME its not started and throwing error like below:
Team Foundation Build Configuration
Build Service endpoint cannot be configured with a host machine other than
MACHINENAME.
OK
I tried to disable loop-back, firewall rule already applied, DNS pointed to correct IP address, DNS Flush already done and also i tried to un-register and register to new one but getting same error. Unable to register with CNAME ?
BotheTFS 2013 and Build Server have version
TFS Build- 12.0.30723.0 (Tfs2013.Update3)
TFS Server- 12.0.30723.0 (Tfs2013.Update3)
Any help ... thanks in advance!!!
Thanks Ranveer Katiyar

Can someone assist me on this ? I am stuck and unable to configure CNAME to Build Server and getting error
Team Foundation Build Configuration
Build Service endpoint cannot be configured with a host machine other than MACHINENAME.
OK
Thanks Ranveer Katiyar

Automated build server for Arch? (like the sourceforge build system)

Has someone considered some kind of automated build system for Arch?
Something that would work like this:
- It'd have every library and dependency possible installed.
- It'd intelligently read the makefiles produced to see what libraries they used and compare them against a lookup table to see what Arch dependencies they then required. Failing that, it could use ldd and a second lookup table that matched libraries to packages.
- It'd attempt to figure out the target binary to run (again, from the makefiles produced), and then run it. If it worked, it'd be marked as usable. If it didn't work, it'd be marked as needing fixing.
All of these points can fail, especially in the parsing of the makefiles; in each case, this would be noted by the system and user action could be taken.
In operation, it wouldn't take away from users managing their own packages. It'd just provide a secure environment to build packages in, and attempt to automate some of the process. In the best cases, the system would theoretically be capable enough to download a package's sourcecode, ./configure it, make it, make a package out of it, get the package verified as usable, then update the repo with it.
Note the verification step in the previous paragraph: I would never want this to be an automated system. Sure, it sound amazing on paper, and might even work for a little while, but sooner or later something would come crashing down and since repo management is quite a trust-based issue, everyone would freak out and they wouldn't want the build server anymore.
-dav7
Last edited by dav7 (2008-10-17 18:41:22)

Who would have access to upload to such a build server? If it's the general public, then this is a security nightmare, as well as a growth curve nightmare. The monetary investment for a project like this would need to come from somewhere.
And yeah, something like this has been considered, and a working proof-of-concept has been sitting around for years. http://projects.archlinux.org/?p=pacbuild.git;a=summary . What this kind of project really needs is someone with some distributed computing smarts and dedication (and time) to get it off the ground in a form that will survive past a proof-of-concept barebones implementation.
One of the largest design challenges would be dependency resolution for batch upgrades. For instance, let's say we update libfoobar, which is depended upon by foo, bar, baz, and batman, the system needs to know that libfoobar needs to be built and installed in order to compile the rest of them against it.

(Deployment) Minimum Software required for BUILD server and IIS WebServer

We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
Thanks in advance for the advice.

Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install. Choose a Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install it.
Jason

[svn:osmf:] 11045: Increasing timer interval in attempt to fix unit test on the build server.

Revision: 11045
Author:   [email protected]
Date:     2009-10-21 02:32:45 -0700 (Wed, 21 Oct 2009)
Log Message:
Increasing timer interval in attempt to fix unit test on the build server.
Modified Paths:
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/composition/TestParallelViewableTrai t.as

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Measurement Studio with TFS Build Server

Hello,
I searched for both a FAQ and specific answers, so I hope I'm asking my question in the correct place.
I am using the Enterprise version of Measurement Studio, and want to start a continuous build process using Team Foundation Server. Adding the NI DLLs to my repository and setting the references isn't sufficient. I get the following error:
(CompileLicxFiles target) ->
Properties\licenses.licx(4): error LC0004: Exception occurred creating type 'NationalInstruments.Restricted.AnalysisLicenser, NationalInstruments.Analysis.Enterprise, Version=9.0.35.292, Culture=neutral, PublicKeyToken=18cbae0f9955702a' System.DllNotFoundException: The NI License Manager client DLL was not found. Reinstall NI License Manager.
Hence my question: Is there a best practice or documented method to configure Measurement Studio to compile with the TFS Build Server?
Thank you,
Mike

i recently began using jenkins as a build system (we develop not only in c# but also java, python and php for websites) and installed the full measurement studio on the buildserver. the only problem that occured after that was, that LC.exe sometimes stops working, so i wrote a 10 line autoit script to automatically close that window and now everything works as expected.
maybe you should try to install measurement studio on your buildserver?

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
http://www.youtube.com/watch?v=8mOuoIWzmdE
Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain as best I can and apologies from the start.
It’s a bit of both Hyper-v and Server 2012R2.
I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
examples.
New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
HostSwitchTeam for selection. When installed it shows the Microsoft Network Multiplexor Driver as the only option.
Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
Any help would be much appreciated.
Paul
Paul Edwards

Hi P.J.E,
>>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
Nic 1,2
HostVMSwitchTeam
Nic 3,4,5
HostMgmtSwitchTeam
>>The adapter Binding settings are:
HostMgmtSwitchTeam
V-Curric
Nic 3
Nic 4
Nic 5
V-Livemigration
HostVMSwitch
Nic 1
Nic 2
V-iSCSI
V-HeartBeat
Based on my understanding of the description , "HostMgmtSwitchTeam and
HostVMSwitch " are teamed NIC .
You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
HostVMSwitch").
V-Curric,
V-Livemigration , V-iSCSI ,
V-HeartBeat are just VNICs of host (you can change their name then check if the virtual switch name will be changed )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Build server is unreachable, DTR server is unreachable

Hi experts,
I have configured NWDI succesfully and created tracks also.
When I tried to login in NWDS in Development Configurations perspective it is giving the following error.
Build server http://<hostname>:50000 unreachable
DTR server http://<hostname>:50000 unreachable.
Thanks
Vardhan

Harsha,
That is different reason.
In our case, the server was http://FQDN:5XX100
XX is the instance name in which the J2EE Engine is installed.
Unreachable means the port is not opened.
Check the ip and the message server port are available for use.
The same problem was faced by us.
Regards
Kaushik Banerjee

Web UI Builder server error

Hello mates,
I just started using LabVIEW Web UI Builder, and, after activation I was trying to complete the first tutorial to get used to the application (http://zone.ni.com/reference/en-XX/help/373286A-01/uibuilder/wuib_gsg2/), but when I am trying to build the VI as the thin-client application I get an error that says:
“Error:
The LabVIEW Web UI Builder server is not responding.
Suggestions:
Refer to status.niwsc.com to see if any downtime is scheduled. If no downtime is scheduled, get support from National Instruments by visiting users.niwsc.com/help.
Other Information...
System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.20913.0&File=System.Windows.dll&Key=HttpWe... ---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer]
Arguments: NotFound
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.20913.0&File=System.Windows.dll&Key=HttpWe...
at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__1(Object sendState)
--- End of inner exception stack trace ---
at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at NationalInstruments.Web.NiDotComServices.Base.HttpServiceRequest.<>c__DisplayClass4.<GetResponseStreamAsync>b__3(IAsyncResult asyncResult)”
I am checking the server status and it seems working fine, isn't it?
I am guessing if the server is working alright I am having some other problem.
I’m only tyring to build to the PC, so it shouldn’t be a problem with clientaccesspolicy.xml, right?
I tried both storaging the files in my PC and in the NI Web Storage.
Also tried both using the Web Builder from my browser and downloaded to my computer.
Could anybody help me with that? Thanks in advance!
Alejandro Asensio, CLAD
Solved!
Go to Solution.

Hi KiraT!
Thank you very much for your answers. It seems finally I bother you without reason... since this morning I just switched on my computer to try some of your suggestions... and it worked on first attempt! Without changing anything! So I guess I'll never know the reason. Maybe it was logging out and in again (although I don't think so since I tried yesterday in 2 different PCs and, in order to activate my account in the other PC I had to log out from my base PC and then I logged in again).
Anyway, I'm going to answer to your previous post just in case the information helps if anybody has the same error in the future:
At what point in the build do you receive this error? Just at the beginning. When you click on Build & Deploy, and then in the new window you choose the vix file to use as Start up VI, then choose the deployment destination and press "Build" So just after that.
Do you have any firewalls turned on? I had yesterday... and I have them now.
Any anti virus software that could be blocking this connection? Idem
What operating system are you using? If you are on Windows, in your services list located in services.msc, what is the status of the NI System Web Server? Windows 7 Prof 64 bits. The NI System Web Server status is Started.
When you log in to the NI Cloud Services Portal, are your services properly listed and activated? Yes, they were and they are.
Thanks for your support!
Alejandro Asensio, CLAD

Switching one DTR Server to other...

Hi,
I had configured one DTR server in my NWDS and it was working fine. But now the development needs to be done on the other DTR server.
I have changed the URL at "development configuration pool" and created a new client for the new DTR server. But when I try to login with the user of the new server, the authentication is getting checked with the previous server only and hence its failing. The error is: "Build Server <previous server>: Invalid Username and/or Password"
Can anyone please sugesst me what needs to be done in order to change the build server to the new one.
Thanks and Regards,
Mausam

Hi Sidharth,
Thanks for the reply. By creating same user I'm able to login to the new DTR. But, I'm getting some errors while importing configuration.
The error is : "com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 403 Forbidden"
And the solution in this way doesn't seem to make sense to me. What if I want to scrap the previous DTR server and want to totally switch over to new one? Do we have any reference file where in I can change the DTR server name and completely remove entries for the previous one?
Regards,
Mausam

Setting SSDT on the build server

I’m having issues building the database project on the build server.
I’m trying to setup our build server. Our application was initial created using VS 2010 and then slowly we migrated to VS 2013. However the path inside all the individual project file (.csproj, .sqlproj) & build project file (.proj)
is still V10.0. Based on research I did, it looks like I have to install Visual Studio 2010 on the build server in order SSDT to build.
So I installed VS 2010 Professional on build server, then trying to install SSDT for 2010. However Microsoft no longer supports SSDT for VS 2010. Website says
“We are no longer updating SSDT for Visual Studio 2010. Projects and DACPACs are fully compatible across shells. Please download the toolset for VS2012 or VS2013 using the links above for continued updates”
So I installed SSDT for VS 2012.
However it installed the SSDT into C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0
folder.
But the build is looking into C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0
How do I solve this issue? Where can I find SSDT for VS 2010.

Hi lax4u,
Does passing the argument /p:VisualStudioVersion=11.0 to MSBuild when building on the build server help?

Installing problem on Windows 2003 Server 64 bit

Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
Matthias

Hi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias

Unable to install SCCM client on Windows Server 2008 R2 - certificate permission error?

I am trying to comply with corporate policy, which is, have an SCCM agent or client on every Windows device. I have successfully used the provided SCCM installer on other Windows 2008 R2 servers. However for one particular server I cannot get the SCCM agent
to install successfully. I've searched forums and documentation, but can't find a solution. Part of the problem is the lack of feedback by SCCM on what is wrong. I think I have narrowed down the symptom to the following error messages from the "C:\Windows\CCM\Logs\ClientIDManagerStartup.log":
[LOG[Certificate [Thumbprint C559304C1598F17641D0732EB9EB787169A25FA7] issued to 'SMS' doesn't have private key or caller doesn't have access to private key.
[LOG[Failed in GetCertificate(...): 0x87d00281]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="ccmcert.cpp:2122">
[LOG[CCMCreateAuthHeaders failed (0x8009200b).]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="clientauthutil.cpp:978">
When I use the Certificates MMC snap in to look at installed certs on this Windows Server 2008 R2 machine, there are plenty of normal and expected certificates there. There is also a branch called SMS with hundreds of entries, I have no idea what that is.
The above error seems to indicate a permissions issue. What do I do to fix this SCCM install? It seems like a server cert issue, not an SCCM issue, so I'm posting to the Windows Server forums.
Thanks in advance.
Thanks

this maybe helpful...
http://www.jamesbannanit.com/2011/04/certificate-requirements-for-sccm-2012/
should be asked in SCCM forum...
http://social.technet.microsoft.com/Forums/en-US/home?forum=configmanagerdeployment
Best,
Howtodo

Can I install Acrobat in a Windows Server 2008 for many users?

I'm looking for a solution for my enterprise to install Adobe Acrobat in Windows Server 2008 R2, where the users connect by remote desktop. I'm looking for a form for they use Acrobat by the same form they uses now Reader. But not for all, only for some of this users.
I called a responsible and he told me that I can install Acrobat for some users in Windows Server 2008 R2, but I'm not sure if that solution will be legal.
Can I buy a special license for it or I have to buy a license for each user? How can I proceed to do this, if it's possible?
Thanks in advance for you attention!

Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
<pre><nowiki>lockPref("app.update.enabled", false);</nowiki></pre>

Install Light Switch on Build server

Similar Messages

Maybe you are looking for