Install of safari 4 and 5 fail on windows 7

Attempts to install either safari 4 or 5 fail on fully updated windows 7. Error message is "error occured during installation of assembly.... HRESULT 0x800736B3

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the Safari trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing Safari again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736B3? If not, which codes are you getting?

Similar Messages

Problem installing Oracle forms and report in windows 7

I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.

Solved, Thank you

Automatic Install of Endpoint Protection fails on windows 8.1 clients with SCCM 2012 R2

Running SCCM 2012 R2 and deploying CM clients and Endpoint Protection via software updates. CM client and EP install fine on Windows 7 clients. CM client installs fine but endpoint protection fails on Windows 8.1 clients with the following from the
endpoint protection agent log:
<![LOG[Create Process Command line: "C:\Windows\ccmsetup\SCEPInstall.exe" /s /q /policy "C:\Windows\CCM\EPAMPolicy.xml".]LOG]!><time="12:22:02.560+240" date="08-13-2014" component="EndpointProtectionAgent"
context="" type="1" thread="4260" file="epagentutil.cpp:607">
<![LOG[Detail error message is : [EppSetupResult]
HRESULT=0x80070643
Description=Cannot complete the System Center Endpoint Protection installation. An error has prevented the System Center Endpoint Protection setup wizard from completing successfully. Please restart your computer and try again. Error code:0x80070643. Fatal
error during installation.
So on the win8.1 client I run the above command line manually in a command window and receive Access is denied. Then I run the same command in an elevated command window and EP installs fine. Does this have something to do with why the automatic
EP client install fails with the 0x80070643 error code? If so, what is the fix?

Hi,
Try uninstalling any other security software.
For more information, please review the link below:
I‘m getting an error code from my Microsoft security software
http://www.microsoft.com/security/portal/mmpc/help/errorcodes.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Mavericks Safari and Pop Up windows

Since upgrading to Mavericks, and the related latest version of Safari, block pop up windows does not always work. It may work sometimes, but regularly with some websites I get windows popping up to the front. Block pop up windows is checked. I've tried cycling it, quiting, restarting all the usual. It looks to me that either this feature in Mavericks is not working right or some websites have figured out a workaround. An example of a website that rules safari is adsupplyads.com. I've removed the cookie but it just comes back whenever I visit some websites.

I haven't investigated the issue, but I have seen that some websites use a javascript that "covers" the entire webpage when it opens. When you click anywhere on the website, the JS opens a new window with an ad.
The only thing I've found to stop those is AdBlock, as William Lloyd pointed out.
I used to just use JavaScript Blacklist to block the Ads that jiggle, make noise, or flash. I don't mind a website making some money to pay for itself, but if the ads are annoying or get in the way, I'd block them. Now, I have to block them all.

Attaching files from Safari and FF- Finder window takes forever to pop up

Hi everyone,
I'm having a strange problem with my Finder. When I am in Safari or FF (Using 10.6.3) and I click the button to select a file to upload on any website, it take the finder window about 20-30 seconds to pop up. This happens every time I want to navigate to select a file. I get the spinning beach ball and the Finder window finally pops up generally 20 seconds later. I checked this in another user account on my machine and it has the same problem. I don't think it's a Safari or FF problem, as it's doing it in both browsers---anyone have any idea why it would take forever for the Finder selection window to pop up?

HI and Welcome to Apple Discussions...
Go to ~/Library/Preferences and move the com.apple.finder.plist file to the Trash and restart your Mac.
The tilde "~" character represents your home folder.
Since the problem happens in more then account I'm not sure if trashing the .plist file will help but won't hurt to try.
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
anyone have any idea why it would take forever for the Finder selection window to pop up?
Try repairing disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and *restart your Mac.*
Carolyn

Installed 3 times and failed.

Tried installing moutain loin 3x and failed every time, always had a disk error and needed to reboot. Stuck in a rebook mood....

Hi and welcome to the Skype Community,
Did you actually submit the recovery form with your information? Just answer as many answer as much detailed as you can and if the information is correct it might be enough information to restore access for you.
Additionally can you please send me the Skype account name of your old Skype account so I can check with Skype CS the status of your account and recovery?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Safari and pop-up window saying computer is infected with virus

Hello,
I'm ... "hoping"...this was just scareware stuff - but I was on safari and clicked on a link off of google when I got a pop-up that said my computer has been infected. I think another window popped up and I clicked cancel - and kept on clicking cancel...it kept popping up and I'd click cancel - finally about after say 5 times closing the popup - the original popup was there. I don't think it gave me a choice to cancel...it was like continue or some other choice.
At any rate what appeared next was what looked like file folders and perhaps a scan bar or progress bar and a bunch of stuff about viruses detected. I panicked and quickly just closed the window as quick as possible and now can't even really recall what I saw.
I honestly didn't do anything other than click on a link. So I can't imagine I really did anything. Can you get into trouble just from clicking on a link?? Is there a way to tell if I really did anything? Has anyone else had this happen and know it is either a concern or just scareware??
Any suggestions?
Should I be concerned??
Thanks!!

Hi
No virus out there affects a Mac directly. Best way to eliminate these intrusive panels is to add DNS server codes to your System preferenes>Network panel.
To do so, open the panel, click on your Internet connection on the left, then select "advanced". In the DNS panel copy/paste these openDNS codes on separate lines: 208.67.222.222 and 208.67.220.220. Then, select OK, then "apply".
Restart Safari.
In Safari, open Safari Preferences>Security>Show Cookies. In the spotlight panel, type the name of the website triggering the warning. Remove any cookies that appear.
Lastly, in the Safari Menu, select "empty cache".
That ought to clean up the problem.

Install Remote Desktop Services Failed on Windows 2012 Server

I understand RDS is not recommended on DC due to security consideration. However since I want to play it at home, it is not much a concern. Such scenario works fine on Windows 2008 R2. But on Windows 2012, the RDS (session-based, have not
tried VDI, but expect same result) installation always fails and is incomplete on DC.
In \Administrative Tools\Terminal Services, I only have RD Licensing Diagnoser and RD licensing manager. The remote desktop service management service cannot be started (Error code: 0x88250001). Is there any extra configuration needed for RDS
working on Server 2012 DC or before the installation? Thanks.
Update: this issue has been solved in Windows 2012 R2 Server. According to
http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
"Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller. In addition, we published
guidelines for how RD Session Host could be used without the RD Connection Broker."
The guidelines (http://support.microsoft.com/kb/2833839/en-us) primarily apply to Windows 2012 Server.

Asinine. Simply Asinine. Microsoft took it out because of $GREED$.
RemoteDesktop has become so popular, they had to break it to make more money. Thats why they discontinued SmallBusinessServer.   If this practice is so tabooo... Why did MS go the opposite direction with SBS 2011 Premium Cal's? SBS2011
had DC, Exchange, RDS and Sharepoint,SQL, RemoteWebWorkplace, OWA all working in perfect harmony. It is an untrue statement then, that it was "allowed but not recommended"
Now you by Server2012 (core + two virtual) and its not enough for all this.
You need at least another $700 for another sever licence to have it all
and who knows if SQL will run on a DC, or Exchange, or R-DERP server. Another reacherous bridge to cross.
By far, the absloute worse release since Millennium. The product is not ready for production, we broke our rule of waiting until the first SP1 upgrade for this and Exchange 2013. Problems with USB drivers and networking running extreamly slow.
Our 2003 SBS server was at least three times as fast, and this server has SAS and SSD drives running. It can't get out of its own way, and IE10 is the most unstable piece of crap to come out of Redmond. Open wide and swallow - Mother Microsoft
knows whats best for you. YOU WILL EAT OUR SLOP AND LEARN TO LIKE IT.   Server2012 AKA "METRO-SERVER"
Now here I sit after 50 Hours back to back setting up a new R-DERP server 2012, AD, Have my RDP licences in my hand at $100 each, and WTH does Microsoft care if I install it on my DC. ITS MY DC. And the cost savings versus the "risk" was
previously MY decision.
Sure, I can install a couple of Virtual HyperV sessions but they are so tempremental to a power-outage in a small business its not worth it. I have to double up my server hard drive resources, buy a $800 battery backup unit and make sure to attach
the cable, and even then, if that Bi**H does not shut down properly, one bit goes awry in a VHD or VHDX file and you are screwed. Restore from lastnights backup and forget about todays work. Not to mention it will probably take a half day to try
to fix it, then recover it then tell the 30 users they lost a days worth of work.
HYPER-V is for test servers and has no place in a small (micro) business environment. 5-30 users.
Microsoft's solution, buy another server. Need Exchange? Buy another server or take the risky cheapskate route and spin up some VHD's. Might as well put a gun to your head and play russian roulette, at least you know you have a one in six
chance of failure. With MS, its a 100% failure for a dirty shutdown power loss, motherboard blows, memory goes corrupt in a few years, your conventional method of recovery is gone, and you have some upchucked VHD file to try to recover some of TODAYS
data from.
Screw server 2012 forever.
I will sell 2008 and SBS2011 Premium unitl it rots in hell like XP (of which there is NOTHING wrong with for the average, WORD, EXCEL, OUTLOOK and QUICKBOOKS that all SMB's use. Its MS $GREED$ Grab the world by the B**ls and squeeze with all
your might to squeeze every dime you can out of *SMB* because big business is going to run thier 2003 Exchange and 2008 servers into ground before they switch to this garbage.
YOU CANNOT INSTALL EXCHANGE 2013 on DC , OR on R-DERP server.
Go buy another server license and server or MOVE TO THE CLOUD and get fleeced every month.
I have 30 DC/R-DERP/Exchange and SBS2011 Premium servers all running for years in perfect harmony, locked down with security so the users can't even WIGGLE with something they are not supposed to work with. They get their apps, cannot install anything
and all these servers are running just fine behind the firewall and perfectly save. The track record of this combination is 100% stable and is up 24/7/365 with no problems. Do yourself a favor and throw this 2012 into the river, you don't need
any weights because it is LEAD and will sink to the bottom by itself.
Why, you ask? Official is "Its for your protection" The real reason? To sell you more $700 server licences.
Maybe for SMB, we start selling Linux NAS Servers, host the Exchange in the cloud and be hearded like cattle to the Microsoft slaughterhouse. One way or another, you are going to bleed.    A little each month to move to the cloud, or
a small fortune if you want to have it in house. Microsoft wants it to be more expensive to have in house. No more buying a server and running it for six years before you upgrade. They can't have in house servers competing with their cloud,
and small businesses are the low hanging fruit ripe for the pickin'.

Verizon DSL install hijacking Safari and Apple Mail

This is my first post.
warning: it's long, just trying to include details
I lost all my bookmarks/folders in Safari -- after a Verizon DSL install-induced browser hi-jacking. See http://www.red-sweater.com/blog/?p=78
for a story that captures my own experience nearly to the last detail. But, unfortunately, unlike the blog author my bookmarks.plist was not a back up of my extensive bookmark collection -- it was a big zero, like some other responders to that reported.
I am just your basic user, and couldn't follow the code discussion toward the bottom of the blog, it's over my head. But, although not knowledgable, I am desperate and persistent and rarely accept "can't be done" answers, even if I don't really know what I'm doing and keep getting that same answer.
I tried all the standard suggestions so far, searching .plists, searching my hd for anything safari, anything bookmark, anything .html. Read many of the discussions on lost bookmarks, tried everything I could understand how to do.
I stumbled upon in the ~/Library/Caches/Metadata/Safari over a thousand files with crazy number/character names that all have suffix ".webbookmark" I probably did have over 1000 bookmarks. When I double click one of those .webbookmark files in that folder, a webpage springs forth in Safari, one of my former bookmarks. Also, click in the finder on one of those ~.webbookmark file and 'get info' and it shows the .html file name and bookmark name for it.
I believe this is somehow my old bookmark collection, and not a history cache, for various reasons: upon clicking, I recognize the webpage that appears and I know bookmarked anywhere from a few months ago, as well as some oldies, but have not visited recently. Random spot checking seems like sites I recently visited but did not bookmark are not showing up.
Would not be fun to double click every one of the 1000+ .webbookmark files in the metadata/Safari to open the page it represents and then "add bookmark" in Safari, to restore my bookmarks. Is there some automatic way of doing that? Am I not understanding the metadata folders enough and have tricked myself into believing they are my real bookmarks and not history or useless stuff. It's totally possible my ignorant forays and fleeting glimpses (but not, out of the corner of my eye....) are fool's gold.
Can someone let me know whether this is worth pursuing, and if so, how, and if so how so in plain terms because of my limited knowledge and floundering around without understanding what I'm doing and what it means.
I know, I know, I should have backed up before I did the *&^@! install, I should back up before I do anything, and do it regularly anyway. Don't laugh too hard now, but get this, when I did back up before, I didn't know what I was doing and just backed up "documents" folder (see, told you I was ignorant; but, older and wiser now...) But I had no idea something like connecting DSL would screw up my browser (and my apple mail -- that's a different awful story too, still unresolved) and who knows what else.
No, I have not used another browser since early 2005, and wasn't as 'bookmark crazy' then as I've been the last few years (or my life wasn't as complicated then and I didn't need to bookmark a lot of important, and I mean important, as well as obscure sites, that I don't need on a daily basis, but do need, but don't want to search through thousands of google hits to find the right one, when I realize I need it again...). Yes, sure, i will salvage what I can from IE and Netscape although they're way incomplete and frozen in time of simpler days.
A thousand curses upon evil Verizon DSL provider who thinks browser/mail/etc. hi-jacking is fun and smart PR. After this disaster, do they really think I'm enthusiastically telling everyone to use them?
I will appreciate any help. (and it's understood if the real answer is "can't be done;" worth trying here though) Just point me to the right discussion if this has already been attended to.
Thanks!
G4 15" power pc Mac OS X (10.4.9)

Hi Starman and Rachel, many thanks for replying, although I was praying someone was going to hand me the magic bullet! Nonetheless, it was useful you confirmed my suspicion that the mysterious metadata cache I stumbled upon while floundering around in desperation, did have some bookmark information for me, but also, unfortunately, that there was no quick and easy way to transform it back into a bookmark list, or know whether it really has what I need. Rats. Seemed worth asking the experts though, and it was.
Starman -- yes, in 2005 I used IE and Netscape, so I was able to salvage bookmarks from there, but unfortunately since 2005 my life became extremely complicated and the most important bookmarks are from that lost window of time. (Why didn't Verizon trash those browsers and bookmarks too, or instead of, Safari? Figures. They somehow just knew how to go straight for the jugular.)
Rachel, thanks for the suggestion about using BBEdit, etc., but I'm too amateur to know what those are or how to use them, but if I did, it didn't sound like it would necessarily be easy or a guaranteed success.
The IT helpdesk at the university I work for mulled it over and they too told me basically what you two did -- no obvious solution; some custom scripting might be able to do something, but that was beyond the scope of their help services.
So... looks like I am just going to have to open that metadata cache folder and start clicking and bookmarking if I want to find out if it is even worth doing and restores the most important bookmarks from the past 2 years. Maybe do 20 a day or something when I'm brain dead anyway after work. If not, there's always plan B -- spending a lot of time googling to find lots of little obscure needles in thousands of haystacks.
Such is life.
I haven't had the strength yet to deal with what happened to my AppleMail and have resorted to using webmail. Time to search the Mail discussion groups. I've had a lot of Mail problems since I started using it 2 yrs ago and the thought of disentangling another Mail problem makes the hair on the back of my neck stand up. It's even more infuriating when the problem isn't even related to something kooky in Mail, or something crazy I brought on myself, it is sheerly the result of Verizon's malicious activities.
Thanks again for your help, it is wonderful when people freely and altruistically donate their time to share their knowledge, and their brainpower, to help each other.
G4 15" power pc Mac OS X (10.4.9)

Installing from Application Catalogue fails on Windows 7 computers

All,
Has anyone else experienced this issue with installing apps from the application catalog. The applications do not install won Windows 7 computers and UAC prompts for admin credentials. The same apps work fine on XP computers.
I tried using a silent switch and get the following error "The software change returned error code 0x643(1603)." Again, with XP computers there are no issues.
The command line I used was msiexec /i "application.msi" /qb and msiexec /i "application.msi" /q. I have used the default options when setting up the app in SCCM. The application catalogue has been added to the trusted sites and the install permissions
is set to All Users in the Computer Agent policy.
I have also allowed users to define their primary device in the User Settings.
Any help would be appreciated.
Thanks
Mahesh
Mahesh Gopalakrishnan

Have you tried to manually install the same application with same command line on Windows 7 machine ( I know, you've already tried this but NOT sure using same command line and same user or nor?)
Anoop C Nair -
@anoopmannur :: MY Site:
www.AnoopCNair.com ::
FaceBook:
ConfigMgr(SCCM) Page ::
Linkedin:
Linkedin<

Installing Bluetooth Keyboard and Mouse in Windows XP Bootcamp

I just installed windows XP in bootcamp. Problem is that my bluetooth keyboard and mouse aren't connected. Short of getting a USB mouse to connect them, is there any work arounds?

Yeah. You will need a USB connected Keyboard and USB Mouse too!.

After installing Mavericks, safari and terminal launch on startup after ever reboot.

After installing Mavericks, when I boot up my computer, Safari opens to the following URL below file:///Applications/iDVD.app/Contents/Resources/Japanese.lproj/iDVD%20Help/pgs /6752.html.
Also terminal also opens to /Library/Image Capture/Devices/EPSON Scanner.
I haven't been able to figure out why these two appliacatoins launch and why these locations.
Thanks
Gerald

Start with checking your loginItems and if you have any, simple remove them. Go to  > System Preferences > Users & Groups > Login Items.
Also, this might be helpful: http://reviews.cnet.com/8301-13727_7-20083707-263/managing-mac-os-x-lions-applic ation-resume-feature/

Satellite P100-488 - Installing Toshiba tools and utilities on Windows 7

Hello everybody,
I have purchased a pre-order of Windows 7 Professional for my laptop and would like to upgrade it from Windows Vista Home Premium installed on it at the moment.
However, I just have one question :
- Do you think I will be able to upgrade from Windows Vista Home to Windows 7 Professional without a full install ?
- Else, if I have to perform a full install, then is it possible to install the Toshiba tools and utilities from the CD (I have not found anything to do this) ?
Many thanks in advance.
Fred

Hi Fred
As I can see you have two questions. ;)
At first I must say that I don't believe anybody here will be able to offer exact answers but here is my opinion:
Q1 for OS installation I prefer full installation but I think you will be able to make Win7 upgrade. Problem is how the Toshiba tools and utilities will work after this upgrade. As far as I know in the past Toshiba has suggested removing some tools and utilities before upgrade installation starts.
So maybe you should think about full OS installation. I think it is better solution for you.
Q2 I the whole story I see one problem what if Toshiba will not offer Win7 support for your notebook model? Then you will have problem and just try to use Vista stuff in hope it will works with Win7 too. Anyway, in this forum you can find many postings where people confirm that most of Vista stuff runs well with Win7.
Good luck Fred.

Error during instalation of quicktime and itunes on windows XP

hey
This problem has been brought to everybody's atention several times but a answer was never found, so let's try again.
When installing itunes and Quicktime the following error occurs: Can't open key HKEYLOCALMAchine\software\classes\QuicktimePlayerLib.QuicktimePlayerAPP\CLSID cheack if you have the rights to acces this key or contact support.
This was in Dutch, so i'm sorry for the lowsy translation. I only have one account on my computer, so i have the rights for sure...
Please help me, i have a brand new ipod and i can't do anything with it!
thanx

Joseph,
thanks a lot!
Bernhard
Joseph Marton schrieb:
> On Tue, 17 Nov 2009 10:51:20 +0000, Bernhard Muehlbauer wrote:
>
>> Version 5.30 produced the same error.
>>
>> If I download the nipp.exe to c:\temp e.g. and then execute this file,
>> everything is ok.
>> Both 5.12 and 5.30 work correct if I execute them from c:\temp.
>
> Would you please post your question in the following ZCM forum?
>
> novell.support.zenworks.configuration-management.10.agent-deployment
>
>
>

OS X 10.5.8 Running VERY slow since installing Safari and itunes updates.

Installed latest Safari and itunes updates today. When my OS restarted the install took a really long time and since then the computer is so slow its un-usable. Its a Macbook Pro, 2.6 intel dual thingy (the model just before the uni-bodies came out).
I have down the PRAM reset and tried launching in safe mode. Neither or these made any difference.
I then started with an install disk installed and while holding down C. Again, it took a long time to boot, but once in that mode I launch the various utilities etc. So I opened disk utility and verify and repair disk...but it found no problems.
Perhaps I should have repaired disk permissions?
Also I thought this might be a lose ram issue or something. I don't have a screw driver to open up RAM slot and re-seat it, but also in 'about this mac' it can see the ram...?
I am very frustrated right now! What have i done to my computer?!
It was running 100% fine until I did this software update.
...and when I say it is running slow, to give an example clicking Apple/N in finder takes maybe 5 for that window to appear followed by another few minutes of the whirling wheel of death. Then I can click on the next item (apps for instance) and go through a similar wait.
argh!

No very clear idea of why it is behaving like that Samuel, but in 95% of cases it is some third party add-on, not yet updated for Safari 5, that is the cause.
Please peruse the following, particularly with respect to Open DNS settings:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Boot camp fails on windows 8.1 install on imac 5k

I've been going around in circles with senior Apple Tech Support, and Microsoft Tech Support, and it seems there's a consensus that imac 5k's with fusion drives CANNOT INSTALL WINDOWS.
Curiously, when I first ran boot camp, it did install windows 8.1, but the install was unstable and failed after switching from 8.1 >> Yosemite >> 8.1. I could reboot as many times as I liked within 8.1, but once I went back to Yosemite, it would kill the windows realm.
I've searched the web for options, trying to make this setup work. The most promising option seemed to be using vmware to install windows onto a raw disk mapping, where the raw disk was a thunderbolt ssd. These pages suggest a pretty viable path (if complicated):
http://apple.stackexchange.com/questions/74977/is-it-possible-to-install-and-boo t-windows-on-a-thunderbolt-drive
http://www.vijayp.ca/blog/2011/09/attaching-a-physical-raw-disk-to-vmware-fusion -4-without-bootcamp/comment-page-1/#comment-4918
It seemed like I had the raw mapping set up - vmware could address the drive directly, set the disk size, etc. But when I tried to install windows from there, the installer found no disks available on the virtual machine.
Apple Senior Tech Support tells me this is a known issue - but they cannot say whether engineering will ever produce a fix. Alas, because I bought the machine through BH Photo, they will only replace the machine with an identical model -- so I've spent a pile on a machine that can't run windows natively (which was the reason for buying the machine in the first place.)
Anyone out there think of a way to make this all work? Thanks either way.

I finally was able to get things functioning - sort of - by installing boot camp on an older iMac, then using winclone to brain-dump the install onto an external, EFI thunderbolt setup. From there I can select that cloned bootcamp as a startup disk, and so far it appears to be a stable setup. Eesh.

Install of safari 4 and 5 fail on windows 7

Similar Messages

Maybe you are looking for