Install Oracle 9 - Problem with jre

Hi,
I have problems with the Oracle Installer in Suse 8.0. The installer hangs when it launchs
the configurations tools setup ( near of end of installation ).
The line is below. It looks like that the installer is trying to use another
JRE version ( 1.1.8 ) of than required ( 1.3 ). When I run the line below with the version
1.3 ( out of installer ) I DONT get the SEGMENTATION FAULT.
Thank you,
Faria
Launched configuration tool Oracle Net Configuration Assistant
Command which is being spawned is /opt/oracle/OraHome/JRE/bin/jre -native
-Duser.dir=/opt/oracle/OraHome/network/jlib -classpath /opt/oracle/OraHome/JRE/lib/i18n.jar:/opt/oracle/OraHome/JRE/lib/rt.jar:/opt/oracle/OraHome/jlib/ewt3.jar:/opt/oracle/OraHome/jlib/ewtcompat-3_3_15.jar:/opt/oracle/OraHome/jlib/netcfg.jar:/opt/oracle/OraHome/network/jlib/netcam.jar:/opt/oracle/OraHome/network/jlib/netca.jar:/opt/oracle/OraHome/jlib/help3.jar:/opt/oracle/OraHome/jlib/oracle_ice5.jar:/opt/oracle/OraHome/jlib/share.jar:/opt/oracle/OraHome/jlib/swingall-1_1_1.jar:/opt/oracle/OraHome/jlib/srvm.jar:/opt/oracle/OraHome/network/tools oracle.net.ca.NetCA /orahome /opt/oracle/OraHome /instype typical
/inscomp client,oraclenet,javavm,server /insprtcl tcp,tcps /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/OraHome/network/install/netca_typ.rsp

If you are using Slackware, install glocale package, otherwise, search which package has LC_MESSAGE files and install it.
Now... run runInstaller again... and voila....
I took 1 day to find it out!
Good luck!

Similar Messages

How to install Oracle 10g with its grid functionality on Linux?

Well, I thought changing the subject line might help to convey the meaning of what I want better. Here's my earlier post from a few hours earlier.
Hi,
I need carry out TPC-C benchmarking test for Oracle 10g (using one, two and four servers; basically using the grid in case of multiple servers). I have installed oracle 10g (with default options) on all the four servers, but beyond that I have no idea as to how can I invoke the grid option in order to carry out the tests-by my statement, I mean do I need to choose grid option while installing Oracle or is it the case that I specify the grid option in the code that I write for carrying out the tests. The OS is LInux (Scientific Linux).
An unrelated problem-one of the servers is 64 bit while others are 32 bit, and proper versions of oracle have been installed. Neglecting the obvious fact that this will make comparisons difficult does anyone anticipate any other problem?
Many Thanks!
Steve
*******************************************************************************************************

Do you think that the installation of RAC can be done
in a week? yes, as long as you know what you are doing and can catch the concept quickly and good at following instructions.
Moreover, we do not have a cluster-all we
have are four servers that are separate. Do you know
if the name Real Application Clusters implies that
the servers have to be in a cluster?
The basic idea of RAC is all these hosts need to share same set of storage. The most popular such storage are SAN and NAS.
An example of building RAC on linux
http://www.oracle.com/technology/pub/articles/hunter_rac10gr2_iscsi.html

Installing Oracle Database with ASM on Oracle VM for SPARC

We're installing Solaris 11 and Oracle VM for SPARC so we can install Oracle Database with ASM. There is a requirement when creating the database that the raw disk have an owner that is the same as the database. Everytime we try to change the owner it will always show that the owner is root.
Any ideas?

Hi
Please let me know from where you are allocating ASM raw disks for the guest domain.
i hope you are changing the disk permissions using chown -R
Also confirm the permission using command # ls -IL /dev/rdsk
Regards
AB

Forms6i - problem with jre.exe

I have a problem with installation of Forms6i.
I have processor Celeron 1700 and Windows XP.
I have installed Forms6i, but when I try to run Oracle Net8 Easy Config
there is an error with jre.exe and program close.
I have installed Patch 10 but the error is continually present.
I don't know what I can do.
I know, that it is probably the processor's fault.
It's very important to me.
If somebody knows what to do, please mail me: [email protected]

Forms6i is not yet certified on XP. See Re: required query for this requirement
Regards
Grant Ronald
Forms Product Management

IE 7 problem with jre version 1.4.1

We are experiencing a problem with a site that is running java applets. It requires version 1.4.1. After logging into this site, a second window should appear. There are several times when that second window will attempt to open but then closes immediately. The only fix that I have found is to open the Java Console (tools>Sun Java Console) with the browser open and then immediately close the console.
Is there another workaround or fix?
Thanks

Starting in JRE 5.0u7 and 6, we have family clsid support for the 1.4.2 and 5.0 JRE family. Please refer to Deploying Java Applets With Family JRE Versions in Java Plug-In for Internet Explorer for details. In your HTML page you can specify the 1.4.2 family clsid so that the latest installed JRE 1.4.2 version on the machine will be used. Note that we no longer support JRE 1.4.1. Please migrate your applet to JRE 1.4.2 or newer JRE versions.
http://java.sun.com/developer/community/askxprt/2007/jl0212.html
=> upgrade to the latest jre

Problems with JRE installation 1.6.0_18 in silent mode

Hi!
I have problems with installing the JRE from the cmd line in silent mode and in a directory with spaces in the path.
If I remove the spaces in the INSTALLDIR, the JRE installs in the directory I have specified but not when I use spaces in the path.
The command I run is following:
jre-6u18-windows-i586.exe /s /v"/qn INSTALLDIR="C:\Program Files (x86)\company\product test\java\""
all I get is the help window to the windows installer with the different options. What am I missing?
BR,
/Peter

Hi
You should install this Patch:
Patch 13948973: JDEV 11.1.1.6.0 FREEZES IN CUSTOMIZATION MODE DUE TO DEADLOCK
After the installation the JDev works fine again.
Regards, David Perez

How to install Oracle Express with different NLS_CHARACTERSET

Hi,
When I install Oracle 10g Express on my PC, the characterset is always set to AL32UTF8. For compatibility reasons, I need to have my db in the WE8ISO8859P1 characterset.
How can I achieve this? I allready tried by installing both the Western Europe version as with the Universal version.
Thanks for your help.
Geert

Hi,
Thanks for the feedback although the problem is little bit weired.
A colleague of me installed the express edition with the same setup files but did recieved the correct NLS_CHARACTERSET.
I allready tried by using different regional settings but that didn't do the trick.
Greetz,
Geert

Install Oracle Developer with oracle database 8i

Hi,
My laptop has a 8.1.7 database already installed, 9ias as well installed.
Know i've need to install Oracle Developer 2.5.
I had run the oracle installer and i did installed the Oracle developer in a new oracle Home .
Know i cant't start my database and no other oracle software...
i've run the regedit and i find out why ... the installer of developer 2.5 have destroy all the oracle home that i've in my computer ...
Thanks.
Pedro Ribeiro

i have developer 2.1, developer 6i in my laptop with oracle 8.1.7 db, and got no problem,
i think the installation order caused the mess,
i suggess install 2.developer 2.1 first then the db,
so wat u need to do is backup ur schema etc.
delete all ORACLE entries in ur regedit.
delete all ORACLE directory in ur hard disk.
then start the installation.
this shld solve ur problem
cheers:
jully abuan manuel

Cannot install Oracle BAM with Oracle XE 10.2.0.1

Hi,
I'm trying to install Oracle BAM 10.1.3.3.0 on Windows Server 2003 Enterprise Edition. I've previously installed Oracle DB XE edition (10.2.0.1.0) on another machine and checked all the software requirements.
I have no problem with the first installation step regarding Oracle Client for BAM. When relaunching setup.exe for installing the other components, I have the following error : "Database version at parameter#1, xxx.xxx.xxx.xxx:1521 should be 9.2.0.7 or higher, 10.1.0.5 or higher, 10.2.0.2 or higher."
However, according to the installation's guide:
"Oracle Database 10g Express Edition (Oracle Database XE) version 10.2.0.1.0 may
be used for non-production purposes. See the Oracle Database 10g Express Edition
Web site for more information "
So here is my question: Is Oracle BAM 10.1.3.3.0 really compatible with Oracle XE?
If so, any suggestions to resolve this issue will be most appreciated!
Thanks.

No Oracle XE is not compatible due to its version. Oracle BAM need 10.2.0.2 or higher as it comes in the POP Up while installation.
I also faced the same issue. Unfortuntely I could not find any version upgrade also for Oracle XE.
I hope this help!

Strange problem with JRE

Greetings,
I'm seeing a problem with a JRE on one machine that is behaving strangely. The problem is that it is slow. I was wondering if anybody's great troubleshooting mind would have anything to throw at this problem.
There are two machines that run a Java app. Each machine is a few years old. They have dual core Athlons. One runs the app quickly, and one runs the app slowly. Both have very similar hardware (including motherboards and network cards). Both have Windows XP Pro (32-bit), fully patched. The machines each have two IP addresses, two subnet masks, and two gateways. They have a persistent static route to the server that the Java app is talking to.
The machine that runs the app quickly has 1 GB of RAM, and older device drivers. The machine that runs it slowly has 2 GB of RAM.
The Java app runs on both on JRE 1.5.0.12 because the developer does not support a later version.
The slow machine runs every application very fast, except for the Java app. The slowness on the one machine is particularly noticeable while the app talks over a network. Both are on the same network and are talking to the same server. A traceroute to the server on the slow machine indicates that every time (in ms) is the same except for one hop, in which it is double.
Unfortunately, the application needs to be running fast. The delay on the slow machine is unacceptable for what it is doing.
We have looked at the network traffic it appears that the slow machine is taking a lot longer to start talking to the network. That is where it is slow. The faster machine starts talking immediately, gets a reply immediately, and is done.
While the slow machine is taking a long time to start talking on the network, javaw.exe is taking up about 50% of the CPU time (according to Task Manager). This goes on for 30 to 60 seconds. This long, extended CPU time does not happen on the fast machine.
The JRE has already been reinstalled on the slow machine.
The slow machine has been scanned for malware, including with Combofix and Malwarebytes. It has had version 11 of Symantec Endpoint Protection running on it, fully updated. I don't think there is any malware installed.
Any ideas? I am pulling my hair out on this one. I suppose we could just reinstall Windows and start over. Any ideas that would be better?
Thanks.

Cross posting
http://forum.java.sun.com/thread.jspa?messageID=9870469
Cross posting is rude.
db

Problem with JRE and Yahoo applets

Hi, I couldn't find any answer for this anywhere else...
Whenever I try to play a Yahoo game, certain windows will "shake". For example, if I log into yahoo, then go to play their spades game, the applet will load without any problem. The game room will appear and everything seems to be fine. But if I click on the Start Panel, the borders of the Start menu will "shake" If I right click on anything, that menu will also shake. This only occurs while JRE is running the yahoo applet. Once I leave the yahoo game, everything returns to normal. If I use IE and MSVM, this problem does not occur. This problem does not seem to occur with other instances of Java either. Only Yahoo games. I tried searching Yahoo for an answer to this, but didn't find anything. When I tried getting help from them, they replied with an email to update Java and/or my browsers. Well, I am using version 1.4.2_04 of java, and have IE6 updated as of today. Also, I am using Opera version 7.54 and Firefox 0.93. This problem with Java and Yahoo occurs no matter which browser I am using. The only way to keep this from happening seems to be to use IE with MSVM. Any ideas?

That page does apply. Everything that you have written indicates conclusively that the Yahoo game you're playing is the source of the problem. The fact that it works with the MS jvm but not with the Sun jvm, that the Sun jvm works with other Java applets, etc all say the same thing - that Yahoo applets wer/are coded to work with the MS jvm, which uses MS extensions in violation of the Sun/MS licensing agreements. The statement at the bottom of the page is proof positive - your spades game is not listed by Yahoo as being fixed.
"07/17/03 - From Yahoo! Customer Care:
We have deployed a fix for the incompatibilities with the Sun JVM� in the following games:
Chess Gin Cribbage Euchre Bridge
Hearts Toki Toki Boom Graffiti Pool
We plan to upgrade the rest of the games on an ongoing basis. "
The Yahoo applet is the problem and requires repair...

Install Oracle 10g with Toad 9.1

Hi All,
I am a novice in database(SQL,PLSQL) programming and hence want to learn and practise very deeply in detail for which i want to install Oracle 10g client with Toad 9.1.So need your advise on the process.
(a)Do i need to download entire Oracle Enterprise Edition Installation for Vista? I have read in one of the forums that downloading only the Oracle Client is enough?
Can you please advise me?
(b)I already have the TOAD 9.1 setup with me which i can install.But,i do not know that how will i use TOAD interface and connect to the oracle database.
(c)Also,any sample script/database with some tables that i can use for learning complex SQL query writing would be very helpful.In brief-any project that i can work on in building all the requirements by writing SQL which simulates real time scenarios of SQL development.
Please help me ,i am struggling.
Thanks
Dev

Hi all,
Thanks a lot for all your inputs.Its very useful and presently I am following the steps suggested.
I had another doubt with respect to this.While attending a oracle course,the instructor had told about an installation option of installing oracle 10g on Linux using VMware/virtual -i am sorry i am not sure about it.
So,can you please give your inputs about this process as I dont know about how to setup?
(a)What are the tools that i will need to build a virtual machine in my present computer with Linux as the OS?
And,what are the steps we need to do ?
(b)How do i use a vitual machine if i install it? I mean how will it work?
(c)Then,at last how do i install Oracle with Linux on that?
Please help me with some more inputs
--Dev

Can't install oracle-validated with kernel-PAE

I can't install oracle-validated when using kernel-PAE.... Anyone help?
Take a look at the following actions:
[root@db ~]# up2date -i oracle-validated
Fetching Obsoletes list for channel: el5_i386_latest...
Fetching rpm headers...
Name                                    Version        Rel
oracle-validated                        1.0.0          18.el5            i386
Testing package set / solving RPM inter-dependencies...
There was a package dependency problem. The message was:
Unresolvable chain of dependencies:
glibc-headers 2.5-34                    requires kernel-headers
glibc-headers-2.5-34                     requires kernel-headers >= 2.2.1
oracle-validated 1.0.0-18.el5           requires kernel-headers
The following packages were added to your selection to satisfy dependencies:
Package                                Required by
gcc-4.1.2-44.el5.i386                   oracle-validated-1.0.0-18.el5           gcc
gcc-c++-4.1.2-44.el5.i386               oracle-validated-1.0.0-18.el5           gcc-c++
libstdc++-devel-4.1.2-44.el5.i386       oracle-validated-1.0.0-18.el5           libstdc++-devel
[root@db ~]# rpm -q kernel-PAE
kernel-PAE-2.6.18-92.el5
kernel-PAE-2.6.18-128.1.10.0.1.el5
[root@db ~]# Best Regards,
Joao

Problem was that up2date config had marked to not install kernel* packages :)
ran up2date-config and removed that ...
Regards
Joao Oliveira

QT7 install causes problems with 7d footage playback

Hi
I installed QT7 this week on snow leopard and since then playback of clips shot on my 7d is not smooth. The video locks up but the audio still plays. When transferred to pro res in mpeg streamclip all I get is a totally black film, no audio or video but the playhead moves. All the footage plays fine in the camera so its not a problem with the card.
I have captured footage before using log & transfer and mpeg steram clip with no problems. Playback direct from the CF in the finder was always fine before the upgrade.
Has anyone else had the same problems?
I really need to uninstall QT7 to get back to the set up I had previously but cannot find instructions anywhere of how to do it. Can someone point me in the right direction. Or would QT Pro prove to be an easier fix?
I'm really grateful for any help.
Thanks
Adrian

QuickTime Player is designed to drop frames if the viewing machine can't process the data fast enough.
A two minute file that is 2.8 GB's in file size suggests a data rate that would exceed the playback abilities of nearly any modern machine.

Error while installing Oracle SOA with Weblogic Server

I am trying to install oracle SOA suite(10.1.3.1.0) with the BEA Weblogic Server 10.I am getting the following error while trying to run the setup.bat which is in the Orabpel_10133_WebLogic\WL_Installables folder.I have changed the class path and other paths as mentioned.
BUILD FAILED
java.lang.NoSuchMethodError: org.apache.tools.ant.util.FileUtils.getFileUtils()Lorg/apache/tools/ant/util/FileUtils;
Please let me know how to resolve this issue
Thanks for your help.

Supporting it requires product changes. According to the current roadmap, SOA 10.1.3.5 is planned for early next year to run on top of weblogic server 10.3.

Install Oracle 9 - Problem with jre

Similar Messages

Maybe you are looking for