Install OS9 on a Mac Pro Quad 3Ghz intel machine

Is there a way to install OS9 on a Mac Pro Quad 3Ghz intel machine. I desire to run a couple programs that only wortk under classic. I hate to have to change computers all the time to do the work then copy it over to a different computer to then to compress it and send it to the person... Just asking and hoping.
iBookRevA   Mac OS 9.2.x   288MBRam/3GBHD

Hi, iBookRevA -
Apple does not support any of the Intel-based Macs, such as a Mac Pro model, for Classic. The install disks that come with those machines do not include any ability to install Classic.
However, there may be a solution. A third-party emulator, SheepShaver, can run OS 9.0.4 on such machies -
SheepShaver
Whether or not your software will run well, if at all, in that environment is another issue.

Similar Messages

  • Fileshare between my Mac Pro Quad Core Intel Xeon (64-bit) & Power Mac 9600

    I want to make my Power Macintosh 9600/233 (Mac OS 9) a shared computer with my Mac Pro Quad Core Intel Xeon (64-bit)(Mac OS 10.6.6). I am using a Netopia Model 3346N-VGx DSL Ethernet Managed Switch to network with my Samsung printer and the Mac Book Pro.
    I also have a Power PC G4 (Mac OS 10.5.8) connected (via a Ziplinq 48" Retractable Crossover Network Cable) to a Farallon EtherWave 10 Base-T AAUI Transceiver, which in turn is connected to the Netopia, from which I can share files. All of this is ethernet connectivity.
    I thought I could connect my 9600 using the same method as for the G4 or by connecting the ethernet cable from the 9600 directly into the Mac Pro Quad Core. However, neither of these methods work.
    An additional stumbling block is that I have not used this 9600 for several years and am not sure of its account name. I'm fairly certain of its password. But because I don't have a second monitor for this machine, I can't muddle my way in.
    My questions:
    1. What might be a network solution to this dilemma?
    2. Or, do I need to get another monitor for this computer and leave it un-networked and just transfer files manually?
    3. Or, would whatever hard drives are in the 9600 be transferable into the networked G4 or the main Mac Pro? (not sure what they are.)
    Any suggestions greatly appreciated.

    Oh man, what a dilemma...
    1. What might be a network solution to this dilemma?
    Without a monitor on the 9600, almost none. At the very least you'll need to configure the server with appropriate network settings for your environment, and that can't be done headless.
    You might only need a display for long enough to setup the network, but you'll need one all the same.
    Once the network is configured your options are either AFP or FTP, but I'm not even sure the old version of AFP is supported anymore, which means you may need to fire up an FTP client on the 9600 and push the files to your MacPro.
    2. Or, do I need to get another monitor for this computer and leave it un-networked and just transfer files manually?
    As mentioned above, you're going to need a monitor at the very least to configure the network settings. I'd be inclined to say at that point you might as well copy the files off any way you can and put the 9600 to rest. If you're really, really fortunate and the 9600 has a CD burner I'd probably use that and count myself lucky
    3. Or, would whatever hard drives are in the 9600 be transferable into the networked G4 or the main Mac Pro? (not sure what they are.)
    The 9600 shipped with SCSI drives, which no current Mac support (at least without a SCSI card), so there's no way to remove the drive from the 9600 and attach it directly to the MacPro.

  • Mac Pro Quad core Intel Xeon upgrade advice please!

    Hi all, i have a Mac Pro Quad core 2 x 2.8ghz Intel Xeon (2008 model) with 4gb RAM.
    I am planning on giving it some upgrades and a fresh OS install as it is slowly grinding to a halt (particualrly noisey hard drives)
    Can anyone recommend best/fastest/silent! S-ATA hard drive to upgrade to?
    Can anyone recommend a good replacement ATAPI DL DVD-RW Drive as mine is also on its way out.
    Ram upgrade. Lots of space for RAM so what would you all recommend?
    Ultimately i am finding myself working with alot of large PS file and so would welcome any suggestions to improve/soup-up the processor/performance.
    Thanks for any advice in advance...

    24GB RAM gets cost ly when you look at 800MHz FBDIMMs in 2x4GB
    You shoudl have added more as 4GB is vary basic and miinimal
    Any SATA drive device is fine. WD Black 1-2-4TB / WD 10K VRs are fast but not as quiet though I do hear those WD Blacks.
    A single SSD for a system is nice.
    10.6.8 works best  in  that system.
    Your GPU most  probably is in need of an upgrade.
    You should never need to do a reinstall of the OS. Clone. Yes. And start wit h a new OS by not upgrade in place over the old OS but that is when to clean install, clone and use Set up Assis tant.

  • Best Mac Pro  Quad-Core Intel Xeon Machine for PhotoShop CS5/Lightroom

    I want to buy a new Mac Pro. I use it almost exclusively to process large quantities of digital images, with large files sizes. Am I better off going with the lower power Dual Quad Processor, or the Higher Power single Quad Processor? I want speed for light room and CS5. DO LIghtroom and CS5 support these Dual Quad machines? Or am I better just getting the highest speed single Quad Machine
    thanks
    Chuck
    [email protected]

    Hi Photoman1125,
    With regard to Photoshop CS5 the 8-Core has the advantage of 64GB maximum RAM compared to 32GB for the Quad Core, and CS5 can use all the RAM which is available.
    The 3.33GHz Quad Core would have the edge in performance over the 2.26GHz 8-Core for most applications.
    However, the 8-Core could prove more future-proof in the long term, particularly if advancement in software makes more use of the additional processor and extra RAM.
    You might find the following links useful:
    http://macperformanceguide.com/index_topics.html
    http://macperformanceguide.com/bto-macpro-configure.html
    http://macperformanceguide.com/OptimizingPhotoshopCS5-Intro.html
    http://macperformanceguide.com/index.html
    Regards,
    Bill

  • Windows – but Which? (What to install on Mac Pro Quad Core?)

    First, apologies in advance if this seems like repetition of a recent topic, but I read through the recent "Vista vs XP" thread and it didn't quite answer my questions.
    Basically, I'm planning on buying a Mac Pro "Quad Core" 2.8 and installing Boot Camp and a Windows OS startup. This puts me into the notoriously tricky area of picking the right version of Windows for my needs, something I haven't really had to deal with in regards to OS X.
    Basically, I'm not looking for something with too many bells and whistles or to much bloatware built into the OS. Also, I'll probably be using some older software/shareware, so backwards compatibility is an issue. On the other hand, I'd like something that works with the Quad Core architecture at its greatest efficiency.
    This means I'm wondering about a couple of features that I may or may not need, and it would be of great help if you folks could point me in the right direction regarding these:
    x64 – Since the Xeon processors in the Mac Pro are 64-bit processors, am I better off with "x64"-compatible versions of Windows (either Windows Vista or x64 versions of XP)? Will this cause problems starting up older programs that may not have been written for x64?
    *Dual Processor Support* – the Quad Core, of course, is a dual processor – will I get better performance from a version of Windows that list "Dual Processor Support" among its features (basically, the "pro", "business", or "ultimate" versions of XP and Vista)?
    If I need those features, I'm probably looking at getting either the x64 version of Windows XP Pro or the Business or Ultimate versions of Vista. However, I'm leaning against Vista based on backwards-compatibility and bloatware issues. That leaves XP Pro x64, but I might go for a more basic version of XP if I find out the x64 or DPS features aren't actually something I need. (The other "extras" in XP Pro don't sound like anything I need.)
    Also, I'm likely to install Parallel Desktop at some point and don't want a version of Windows that would have compatibility problems there, either.
    Anyway, any answers you folks can provide for me in this regard would be very helpful.
    Thanks in advance,
    Peter

    Truth is, I am disappointed in VMware Fusions slow walk toward full support for 64-bit and SP1 but 2.0 beta is getting there. Never used Parallels but best to check their own support forums. They also updated the 1.x version recently.
    http://communities.vmware.com/community/beta/fusion
    http://forums.parallels.com/
    You don't need anything first, except I would start with a new hard drive for Vista, don't even do anything with it and pull OS X drive, boot Vista DVD and go from there, just as you would normally. Much easier. After it is installed is when you need Apple BootCamp from your Leopard OEM DVD, install, and then Apple Software Update will take care of 2.1. And install your graphic drivers yourself.
    The problem(s) come with trying to use BootCamp Assist and setting up partitioning, and it only makes it harder - not easier - on Mac Pro (you aren't and don't want to use your OS X boot drive).
    Windows on Mac forum @ MacRumors
    http://forums.macrumors.com/forumdisplay.php?f=86
    And their Mac Pro area http://forums.macrumors.com which has a lot of Vista talk from Mac Pro owners.
    The only real issues are which graphics card to get today or in next weeks, what drives you are going with and other upgrades like memory (8 x 1GB is actually a good base ideal figure so all DIMM slots are taken up).
    Barefeats has a number of benchmark articles:
    Radeon 3870: http://www.hardmac.com/news/2008-06-16/#8451
    Vista graphics: http://www.barefeats.com/harper11.html
    Memory: http://www.barefeats.com/harper12.html
    Drives: http://www.barefeats.com/harper9.html
    WD 300GB Raptor: http://www.barefeats.com/hard103.html
    - this is the drive to die for, but not natively supported
    I buy most of the upgrades I need over the last ten years from OWC http://www.MacSales.com that specializes in Mac.
    http://eshop.macsales.com/shop/memory/Mac-Pro-Memory
    http://eshop.macsales.com/item/Western%20Digital/WD6400AAKS/
    - until the WD "Black" series (I guess Blackbird name or SR71 are already taken) along with 3rd generation of their RE series drives. WD has been popular, reliable, with Mac Pro for last two years. Can't say the same of every vendor. Samsung F1 is also a real winner.
    If you buy only one book to understand and get the most out of OS X: "Mac OS X: The Missing Manual" (Pogue has a Missing Manual Series on most everything, and this is the most popular recommended for Mac OS).
    http://books.slashdot.org/books/08/02/27/1551206.shtml
    I needed 3-4 for Vista before I found "Administrator's Pocket Consultant" and O'Reilly's "Vista Annoyances" are both excellent along with MS Press's "Inside Out."

  • UPGRADING AND MIXING MEMORY ON MY MAC PRO QUAD CORE DUAL 2.8 (Xeon)?

    Hello,
    I have a Mac Pro Quad Core Dual 2.8GHz (Xeons) with 4GB of memory (2 x 1GB Apple modules + 2 x 1GB other brand - Shown as "Manufacturer 0x855D") and now I want to fill the other 4 memory slots by adding an additional 16GB (4 x 4GB modules) for a total of 20GB of RAM.
    My 2 questions are:
    1.- In which order/pattern should I install these new 4 X 4GB modules along with my original Apple 2 x 1GB modules and the "Manufacturer 0x855D" 2 x 1GB modules the best way (for better performance)? - I have heard stories that if I do it improperly, I could slow down my Mac Pro...
    This is how I have them configured right now:
    Raiser A / DIMM 1 = 1GB (Manufaturer "0x830B") - I assume this is the Apple memory, right?
    Raiser A / DIMM 2 = 1GB (Manufaturer "0x830B")
    Raiser A / DIMM 3 = Empty
    Raiser A / DIMM 4 = Empty
    Raiser B / DIMM 1 = 1GB (Manufacturer "0x855D") - How can I find which manufacturer is this?
    Raiser B / DIMM 2 = 1GB (Manufacturer "0x855D")
    Raiser B / DIMM 3 = Empty
    Raiser B / DIMM 4 = Empty
    2.- What brand would be most compatible to work with my Apple 2GB (2 x 1GB) factory memory? Kingston? Crucial? Mushkin? iRam? Corsair? OWC? (Does OWC sell their own brand? or which one do they carry?-its not specified on their web)
    Thank you so much in advance for all your help!

    About RAM installation in the Mac Pro
    Mac Pro memory arrangement photos
    Mac Pro Memory Configuration
    Memory Tests- "2008" Mac Pro
    Ram should be installed minimally in matched pairs and optimally in matched quads. This means the memory modules are the same size and specifications. They should also be equipped with the Apple-certified style of heat sink.
    Brand really doesn't mean much as long as they work.

  • Error message on my Mac Pro Quad Core Dual

    Hello..I'm hoping someone out there can help or advise me.
    I turned on my mac this morning to find it's normal loading screen of grey with the darker grey logo in centre..all normal at this stage. This was followed by a wipe from top to bottom making the background grey a little darker and in the centre the apple logo was replaced by what appeared to be a semi transparent power button symbol with the words. "You need to restart your computer. Hold down the Power button for several seconds or press the restart button"
    I have tried this several times to no avail I have also zapped the P RAM again nothing. Can anyone out there help. I have a Mac Pro Quad Core Dual which is only a few months old and is up to date with its system software.
    I could be so grateful of any assistance.
    Warm regards
    Sophia

    Make an appointment. But in the meantime...
    So from cold boot, you can't do the Command Option P R through 2-3 full reboot cycles (don't let up)?
    Unplug everything and let it sit overnight without power cord or anything. That is the only way to rest the SMC system management controller on the 2008 model, the older model still had a reset button.
    Also learned that the 2008 Macs can all boot AHT if the original OEM installer was used to install the system and the drive has not be completely reformatted and retail OS X used, just holding down "D" on startup. But you have to
    Also, pull all your hard drives. Rule out that, which I have seen a hard drive cause panic on startup, which required disabling journaling and other repairs from Disk Utility and deleting caches, then repair, and finally do Safe Boot (shift key down on startup).
    The only way to test RAM is with TechTool Deluxe or Pro; with Memtest or Rember; and to test some devices is to try using a differnent one, keyboard and mouse included if you have any.
    Last hope: open case, look inside, take the two RAM Riser cards and pull out, check the DIMMs are fully seated.
    If you have 3rd party memory, remove that (would need to before taking in probably).
    Might want to put RAM back to way it shipped with 2 x 1GB and one DIMM on each Riser in slot one. Maybe that will wake this sleeping giant. Changing RAM config use to be one way to clear nvram in the distant past in the time of Arthur.
    PS: it is "odd" to find a BTO 3.2GHz system, and only 2GB. For memory performance, Barefeats found a marked improvement with 8 DIMMs, and of course Mac Pro really needs memory to feed 8 cores and pro apps (2GB would be okay for web and email type use only).

  • Windows 7 Install fails on early Mac Pro

    Just wondered if anyone else has experienced a blue screen failure during installation of Windows 7 RC 32-bit on an early Mac Pro (pre-2008). I get almost to the very end of the install during the copy files/settings phase (last one), and after a reboot, Win7 seems to start, but eventually crashes with a blue screen.
    This is on a separate hard drive formatted to all NTFS. I've tried an install from the DVD from scratch (freshly formatted drive), and then again as an upgrade from a Vista installation (this all took many hours - and I do this for fun?). All with 32 bit since I don't have access to 64 bit drivers. But the result was uniform in both cases. The same version installed perfectly with vmWare Fusion.
    So I suspect some issue with my Mac Pro Quad, which is an early, first generation version. I know others have had success with Win7 on a Mac Pro, but maybe on 2008 and later versions?
    I have yet to try Win7 64-bit. Hopefully will get cured by final release, but would just like to know if anyone else with early Mac Pros have had success.

    I don't think you really need to worry about 64-bit drivers - I don't have any Apple software or Boot Camp.
    You don't mention RAM, disk drives, or graphics card, or any other hardware and whether you tried w/o.
    I would warn that our early Mac Pro will have to work around the EFI boot menu that Windows 7 RC x64 presents.
    I've had my 7300GT culprit; a disk drive that had to be reformatted in Vista; pull the 4 x 512MB of RAM (Apple) that was beginning to trigger a red light. So there are various items. And they all took hours to diagnose, swapping hardware; lots of head scratching.
    There is no cure except to get around hurdles. We are stuck in EFI 32-bit land. May have to / want to buy 10.6 to get newer drivers, but that won't add 64-bit support. You can if you must, get 64-bit Boot Camp. I feel it is optional.
    If you can install Vista, then install Windows to another drive, leaving Vista alone. Burn the ISO to DVD and copy the DVD back to a 8GB NTFS partition and run Windows Install Setup off that is fast and neat.
    Setup a drive with room for Vista, Windows 7 RC, 8GB ISO partition, and data partition. Or expand to multiple drives.
    Burn the DVD slower. There are other tips and ideas.
    http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0
    I've found Kaspersky 2010 beta and license from 2009 Internet Suite to probably be the best I've tested so far in that area.
    Fusion use to use Windows Server 2008, maybe it got updated to include a better profile, or it was only x64 that had any problems. Sun VirtualBox is another. With that, you can modify the DVD to allow booting easier if needed.
    I have Vista SP1, then put in Vista SP2-RC (same drive) and for Windows 7 I have one install that is for testing anything new first, and another that I use daily regularly - and prefer to use 7.7100 RC now instead of Vista.
    Installing Windows while booted in Windows is neat, can be fast, but first find the hardware issue. Most BSOD is drivers and need to safe boot and uninstall drivers, but you may not have gotten even that far. And don't until you have a restore point, and be ready to reboot from Vista or 7 DVD to repair Windows.

  • Are these Seagate 2TB drives compatible in my Mac Pro Quad Core 2.66 GHz?

    I still have an Apple Mac Pro "Quad Core" 2.66 that was introduced August 7, 2006. I currently have 4 of the following Seagate internal hard drives installed: ST3750640AS SEAGATE BARRACUDA 7200.10 - HARD DRIVE - 750 GB - INTERNAL - 3.5" - SATA-300 - 7200 RPM - BUFFER: 16 MB
    I want to know if these hard drives will work in this computer: Seagate Barracuda XT ST32000641AS 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive.This computer is powered by two 2.66 GHz dual core Intel Xeon 5150 processors.
    The old drives were purchased from NewEgg and I want to purchase the new ones from there also. Are these 2TB drives compatible in my computer?
    Thanks,
    Lou Hosta

    SATA is SATA.
    Apple introduced GPT (GUID) years ago to support 2TB and larger (default partition scheme).
    SATA III is also backward compatible with SATA II (otherwise, who would Seagate have to sell to?)
    The only issues have been with green drives, using green version for RAID or for performance purposes.

  • Boot Camp, Vista Ultimate x64 SP1, 2009 Mac Pro Quad 2.93, ATI 4870 HD

    Hello All,
    I’ve run into a problem installing Boot Camp with Vista Ultimate x64 SP1 on my early 2009 Mac Pro Quad 2.93 with Apple’s ATI Radeon 4870 HD (the one with one DVI and one mini-display). I followed the instructions from the Boot Camp Installation and Setup Guide, and everything was going great until I hit page 12 of the Guide (Step 3). The Boot Camp drivers installed without error, and prompted me to reboot. Upon rebooting onto the newly installed Vista x64 partition, the screen went black after the chkdsk screen appeared. I can boot into Vista safe mode, but booting into Vista normally results in the black screen. On a hunch, while in safe mode, I uninstalled the ATI video drivers installed by Boot Camp. I was then able to boot Vista normally, but only with the standard VGA adapter. Then I tried installing the latest 9.4 ATI drivers from the chipset vendor, AMD, http://game.amd.com/us-en/drivers_catalyst.aspx. Booting normally after the ATI chipset drivers were installed left me with a mostly black screen, and a few swizzles of horizontal color, but not enough to make out any sort of image. Once again, I was able to boot normally by first booting into safe mode and then uninstalling the ATI driver, leaving me with the standard VGA driver.
    The displays I have tried so far are 1) Apple Cinema HD 23”, and 2) Apple Cinema 20”. Also, I have tried all 6 permutations with the ports on the Apple version of the ATI Radeon 4870 HD with both displays (using the mini-display to DVI adapter), 2 permutations with both displays, and 4 permutations with single displays. All permutations result in the same black screen after installing Boot Camp drivers.
    Am I missing something? It seems to me that there is a display driver that needs to come from Apple that will work with the Apple version of the ATI Radeon 4870 HD in Vista Ultimate x64 SP1 attached to an Apple display. I’ve installed Vista Ultimate x64 SP1 and many other operating systems in the past 27 years of working with computers, and typically with video cards I’ve had to get the drivers from the vendor that shipped the card, not the chipset vendor. Sure, occasionally the opposite is true, and I don’t mind spending a few days to figure out what works best for me as long as I believe I am making progress.
    Has anyone else run into this problem with his or her early 2009 Mac Pro Quad 2.93 with Apple’s ATI Radeon 4870 HD? I’m posting this in the Boot Camp forum as I think this problem is rooted in the Boot Camp drivers, specifically for the Apple ATI Radeon 4870 HD. Please let me know if I should post elsewhere.

    You are the second person I think I've seen with trouble using Mac Pro and ATI drivers (other was on Mac Pro forum).
    When updating graphics, there are extra steps that insure you get the best working drivers.
    I've always found Apple to be behind the curve on Windows support. Drivers that come with a card from the vendor ususally means ATI or Nvidia, and even then, you go to the web and download and install the latest tested / beta / qualified drivers. Some people try a variety of driver versions to find the one that works best.
    Apple has not been updating Boot Camp drivers for Late 2008 and on Macs. Boot Camp 2.1 is now over a year old. What is on your OEM Leopard DVD is the only drivers I would use - if at all! try without is what some do, and then see if you can selectively install. Under Windows 7, I don't need or install, and now with the RC/7077 version of 7, Microsoft 'blocks' installing Apple Boot Camp drivers as known to cause problems.
    If it ain't broke, don't fix it. Unistall the various Apple services, drivers, startup items that you can live without or until you narrow it down. iTunes 8.1+ in Windows can break and prevent ability to even use optical drives and devices for instance.
    Some tips for upgrading drivers, one from eVGA forum but should translate.
    http://www.evga.com/forums/tm.asp?m=396474
    http://game.amd.com/us-en/drivers_catalyst.aspx
    http://downloads.guru3d.com/download.php?det=1655

  • IMac 27" or Mac Pro Quad-Core?

    Hello all,
    I understand that this topic has been covered before although I am still unsure and I am looking for some help please!
    I am currently looking into purchasing a new computer to complete my architectural post-graduate degree. I currently use a PC, which I have done so for many years and initially I was thinking about buying a customisable Dell XPS sticking to using PC’s. Having recently been sent an email from Apple regarding student discounts offered on the Mac range I thought I'd look into getting an Apple having heard nothing but praise and also that it can also run Windows XP (via ‘Bootcamp’). This would mean I would effectively get 2 “computers” for the price of one, however, after hours of research, scrolling through web pages I am torn between the Mac Pro Quad-Core and the iMac 27” (Intel i7) !
    I mainly use Microstation V8/AutoCAD, Maxwell Render, Adobe Photoshop/Illustrator/InDesign, SketchUp, etc, and require a computer which can run programs quickly and efficiently, including some rendering. I will be switching between both operating systems, but will heavily use Windows to run most of my software.
    I was first hooked onto the iMac due to its sheer simplicity, elegance and also the specification (Intel i7) which was on par with the Dell I was considering. Although reading deeper on various forums, articles, I found that the Mac Pro Quad-Core might be a better alternative for future proofing (IE. Upgradable hardware) but it costs a little bit more than the iMac plus no monitor included. I feel that the iMac will suffice for what I need but I am not sure how about its longevity. I will be using the computer intensely for the next year, however, after I graduate I will see the computer being used casually.
    Another question is, if I were to use Bootcamp how would I share drivers (printers and scanners) between both Windows & Mac OSX? Also, when running Windows OS, would I need to install anti-virus software just like a PC?
    I am wondering if anybody could shed some light, assistance, experience and guidance to help me with my purchase please.
    Many thanks in advance!

    I would say a lot of it depends on just how extensively you expect to be using it after you graduate. Either system should carry you through a single year easily, but the Mac Pro obviously has the expandability advantage that will help extend the tail of its useful life.
    IMO, a reasonable expectation for an iMac is 2-3 years, while a Mac Pro is 3-4 for the quad core, 4-5 for the 2x4-core, and if you're buying one of those 12-core systems, odds are you're doing some serious number crunching and you'll be replacing the thing pretty quickly.
    So, if you think there's a better than 50% chance of needing to keep this computer for a longer than 2-3 years, go for the Mac Pro, otherwise you can get the iMac now and see where life has taken you in 2-3 years.
    As for bootcamp... Think of it like dual booting on a PC. Bootcamp does NOT allow you to run both operating systems at the same time, it's one or the other. Think of it like a time share. Programs like VMWare and Parallels let you run Windows in a virtual machine, but odds are you won't want the performance hit the emulation brings with it. So, there's no need to share drivers, because you'll need to install drivers for all hardware on both operating systems. You'll just need to make sure that any hardware you buy will work with both Mac OS X and Windows. When you're running Windows, it's no different from as if you had bought the Dell you were contemplating. Everything you would have done on the Dell as far as security software, you should do on the Mac with bootcamp. Mac OS X doesn't necessarily need AV software (yet), but Windows absolutely does.

  • ALSO Just purchased a refurbished Mac Pro Quad 3.0 GHz Intel Xeon!

    Hi All, I'm new to this forum but having a severe case of Extreme Buyer's Remorse / Best Bang For The Buck Syndrome...Yesterday I also purchased a Refurbished Mac Pro Quad 3.0GHz, 2GB, ATI 1900 from the Apple Store for $2299. Seemingly, the difference between the one I bought and Barry is that mine came with a second Superdrive. For the same price, I thought why not?
    So, here's the nature of my anxiety: I'm not totally conversant in Mac Pro-speak and am having a hard time understanding exactly what I purchased, when it was originally manufactured, etc.. The receipt I was provided indicated I bought a machine with 2 dual-core processors along with a model number that apparently does not exist in any universe other than the Apple Store, FB052LLA.
    I've made a number of phone calls today to the Apple Store and they said without the serial number (which I won't have until I receive the unit) they cannot tell me exactly what the base unit was before the config was made. I very much want to know:
    -Is this a 5100 series Quad Core or 5300 Series Eight Core or something else?
    -When was it likely originally released?
    -Most importantly, was the $2299 money well spent when MacMall is now offering a Quad-Core 2.8Ghz, 2GB, ATI 2600 for $2214?
    My anxiety level rose just typing all this out, so thanks in advance!!
    Larry

    Apple Mac Pro Quad Xeon 3GHz Workstation, model no. MA052LL/A, with two SuperDrives and ATI Radeon X1900 XT 512MB video for $2,299 (was $3,349). This is your model with the "MA" in the Model No. replaced with an "FB". Presumable the FB = Refurbished.
    I believe this model was released August 2006 and contained Intel Xeon 5100 series ("Woodcrest") processors. It was discontinued Jan 2008.
    The Machine ID should be MacPro1,1
    Ref http://www.apple-history.com/
    "Announced at WWDC in August 2006, the Mac Pro completed Apple's transition to Intel processors, replacing the PowerMac G5 (Late 2005) as Apple's professional desktop Mac. The Mac Pro was based on two 64-bit, dual-core Intel Xeon 5100 "Woodcrest" processors, which included a 128-bit Vector Engine. The Mac Pro's case resembled its PowerMac predecessor's--with the exception of a second optical drive bay--but the interior of the case was completely redesigned. The Xeon processors required less heat-dissapation than G5 processors, allowing a smaller cooling system. The Mac Pro had four easily accessible hard drive bays (for a BTO maximum of 2 TB of storage) and easy access to its 8 RAM slots, which allowed for a Maximum of 16 GB of RAM.
    With the Mac Pro, Apple decided to do something different in terms of configuration. Since the majority of Apple's professional customers tended to heavily-customize their Macs at purchase time, Apple offered a single, heavily customizable Mac Pro model. In effect, this shifted the decision-making for what configurations to sell to the resellers, leaving Apple with a streamlined manufacturing process. The single model sold for $2,499, and included two 2.66 GHz, dual-core Intel Xeon 5100 processors, 1 GB of RAM, a 250 MB hard disk, a SuperDrive, and an Nvidia GeForce 7300GT graphics card with 256MB of VRAM. BTO options included 2.0 and 3.0 GHz processors, up to 16 GB of RAM, up to 2 TB of storage, a second SuperDrive, a variety of graphics cards, and Airport Express and Bluetooth support."
    Your MacPro has 4 cores (2 per processor) and not the Mac Pro (8 core) you mentioned.

  • Hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen

    hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
    regards,
    v.s.bharan

    Welcome to Apple Discussions!
    Do you keep your data backed up?
    If not, you should always do so*:
    http://www.macmaps.com/backup.html
    You never know when a hard drive or a directory might go bad.  Having a bootable clone is a must.
    That link also shows you some tools you can use to recover data.
    If you aren't backed up, try buying those tools first, before attempting to repair the directory.
    Directory issues can be fixed with these tools*:
    http://www.macmaps.com/directoryfaq.html

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • HT4809 My keyboard don't work after installing lion on my mac pro 2,6  any one a idea what to do ?

    I have installed lion on my mac pro 2x quadcore 2.6 from 2009 and now i have to reboot my system sometimes to make my keyboard work.
    Can someone help me ?
    Mac 3,1 osx 10.7.3
    Kind regards
    Jan

    I have the exact same problem with the same two operating systems and the same exact computer. Needless to say, I would also love to get an answer to this question.

Maybe you are looking for