Install software that came with the BT MM?

Hi,
Just got my Bluetooth Mighty Mouuse. Should I install the software that came with it?
Is there any benefit or added functionality in doing so?
I have a new 20-in Intel Core 2 Duo iMac.
Thanks...

You'll need the software installed to configure fully the MM's buttons via the Keyboard & Mouse preferences pane (and also view the battery status). On our Mac Pro it was preinstalled, but on our Mini it wasn't. I'm not sure what the default is on the new iMacs.

Similar Messages

Can't install software that came with new Canon A540 digital camera

The installation process gets as far as "preparing to install imagebrowser" then hangs up the whole computer until I force quit. When I force quit, I see the installer plus a "master installer" in red that says it is not responding. I really would like to install the imagebrowser and photostitch. I know I can download the photos into iphoto, but iphoto does not allow selective downloads, nor does it stitch the photos, as far as I can tell.
Also, how can I prepare a slide show and add voice narration?
I'm using 10.4.7

you need to install it via a superdrive. If you have the original one that came with the mac, you can purchase an external case to put it in and then plug it into the usb port. You can not download the software anywhere. Only do what I first suggested or repurchase it.

Is there a way to enable 3D display outside of the software that came with the device?

Hello,
I just bought this device and my primary use for it is the 3D function, but unfortunately there is no option to enable or disable the 3D function outside the set of software that came with it. For example in Cyberlink Power DVD 3D works fine, TriDef software creates depth from games but that is not actually what I need. I need just to have an image or a sequence in standar over-under or side-by-side formats and to enable the 3D effect on the display.
Some third party software, Stereoscopic player for example recognizes the monitor fine and displays the 3D content normally. But what I need is to display a full screen image from After Effects so I could have a live preview of the 3D, is there a way to somehow engage the 3D mode by some utility or driver?

MHetlerovic, welcome to the forum.
I read the manual thoroughly and it doesn't appear that there is any way to access the 3D mode without using some type of program.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I have a late-2008 macbook that is running 10.5.8. I also have a newer macbook that came with snow leopard. Can I use the install disk that came with the newer macbook to update my older macbook?

Also, when upgrading from Leopard to Snow Leopard, will I lose all the data that is currently on my hard drive?

No, that SL disk is meant for the computer it came with only.
Upgrading to SL generally will not cause data loss, but you should have a backup of your important files in any case.
You can get a Snow Leopard disk by calling Apple - in the USA it's 800-MY-APPLE.
Best of luck.

Unable to install updates that came with the macbook

When I am trying to update like iPHoto and Imovie I am getting an error asking me to sign in with the account id that I used at the time of purchase. I have these installed with my Macbook pro and is trying to update after login with my apple id. Can you help me on how to get these updates.

Hi Soumyajyoti,
Have you changed your AppleID at any point? Do you have any other AppleID that you know of?
GB

Macbook 2008. Did an erase and install from install disk that came with the mac but now it won't move pas the Apple logo with spinner.

My Macbook was running slow and kept giving me error codes so I figured the easiest thing to do would be to erase it and do a fresh install. But now, after installing with the disk 1, it won't move past the grey Apple logo screen.
I've done disk repair and verified and there seems to be no problems.
Any suggestions?
thanks

MacBook, Mac OS X (10.7 < your profile
Did you try > Lion Recovery

Unable to Install Universal Wireless Keyboard with the CD that came with the Palm Tungsten E2 on my Windows Vista OS. Can some help? Would Appreciate it very much.

I recently bought a Palm Tungsten E2. I have been unable to install the Universal Wireless Keyboard software that came with the E2. Went online and downloaded the version 1.13 UWK and that would not install either. What did I do wrong?
Post relates to: Tungsten E2

For Vista that version will not let you install programs. Good news though is we have a version you can. Go here, http://www.palm.com/us/support/downloads/windesk62.html and install this on top of the version you already have. There is going to be a few changes on the desktop, there is no quick install, but the install tool.
Once you have that done just double click on keyboard and it will ask you your hotsync name and sync and your done.
Oh as a side note the check if this is your solution is only if the answer solves your original question.
Message back if you have more question or need more help
Post relates to: Palm Z22

I have a mac pro 2007 model. It appears I have a corrupted sector on my the hadrive tha has my operating system. If I use the install disk that came with is (Tiger) can I still get my lion back.

I have mac pro 2007 model given to me, I updated it to lion about six months ago, and I do not have a time machine.
Lion stopped loading before I get to the login screen,
I tried all the tips, doing a option/shift/v. I noticed several fsk_dsk errors that it could not fix on my boot drive.
Restore would not work either. The only physical copy I have is the install disk that came with the mac. I think it is Tiger.
If I put this operating system on will I be abel to upgrade it to lion, and if so will I have to pay again?

The Lion Recovery Partition has its own index. Your Macintosh HD partition is the one with the troubles.
If Disk Utility cannot fix it, you may need to apply different Utilities, such as Disk Warrior.
Some readers suggest that the best disk repair is to erase the drive and restore it from your Backups.
This might be a good time to consider getting a new drive to have on hand. This would allow you flexibility in copying, fixing, and (if needed) replacing the drive with the problems.

Software that came with my Palm T/X

My T/X came with Documents to go on the disk. Does anyone know where you can download the software that came with the Palm T/X. I lost my disk when I moved
Post relates to: Palm TX

Hello mgrschizo, Welcome to the Palm Support Community.
There is no legal way to download the Installation Disk for the TX, due to the fact you've already mentioned - it contains copywritten software that is not "free for the taking". You can purchase the latest version of Docs to Go from Dataviz.com.
Usedpdaparts.com appears to still have some of the disks for sale though:
http://www.usedpdaparts.com/Software.html
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my came

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my camera. Is there any other way i can install this on my camera without using the provided cd or buying the software again?

That doesn't help the user with the serial code though.
There has to be some kind of code somewhere within the package. The disk itself does not contain one. You can look here for help with finding your serial number:
Find your serial number quickly

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
http://www.logitech.com/en-us/support/gamepad-f310?crid=411
I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid

Try a new post in the 10.5 Installation forum.
DALE

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even h

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even had upgraded to the Mavericks . I do not think it's fair to have to pay again and I would like to upgrade my operating system without having to pay again for the same system.

Hi anatuta,
Thanks for visiting Apple Support Communities.
It sounds like you are trying to upgrade your Mac to a newer version of OS X, after completing a fresh install of Snow Leopard.
If you have already purchased and downloaded OS X Lion and Mavericks, you should be able to find these items in the Purchased section of the Mac App Store.
You may find the steps in this article helpful with finding the items:
Mac App Store: Finding your purchased apps - Apple Support
If you do not see the items in the Purchased section, they may be hidden:
Hide and unhide purchases in the Mac App Store - Apple Support
All the best,
Jeremy

Install software that came with the BT MM?

Similar Messages

Maybe you are looking for