I have a late-2008 macbook that is running 10.5.8. I also have a newer macbook that came with snow leopard. Can I use the install disk that came with the newer macbook to update my older macbook?

Also, when upgrading from Leopard to Snow Leopard, will I lose all the data that is currently on my hard drive?

No, that SL disk is meant for the computer it came with only.
Upgrading to SL generally will not cause data loss, but you should have a backup of your important files in any case.
You can get a Snow Leopard disk by calling Apple - in the USA it's 800-MY-APPLE.
Best of luck.

Similar Messages

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

HT3258 help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3

I want to upgrade iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with the 15" MacBook Pro that totally died, and upgrade iMac from that DVD

I want to upgrade my iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with my purchase of the 15" MacBook Pro that totally died, and upgrade the iMac from that DVD that came with the laptop ? Thanks

No, that 10.6.3 DVD is system specific to the MacBook Pro.
You need a Snow Leopard Upgrade > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
or if a MobileMe users > Apple throws MobileMe users a free version of Snow Leopard

I have a mac pro 2007 model. It appears I have a corrupted sector on my the hadrive tha has my operating system. If I use the install disk that came with is (Tiger) can I still get my lion back.

I have mac pro 2007 model given to me, I updated it to lion about six months ago, and I do not have a time machine.
Lion stopped loading before I get to the login screen,
I tried all the tips, doing a option/shift/v. I noticed several fsk_dsk errors that it could not fix on my boot drive.
Restore would not work either. The only physical copy I have is the install disk that came with the mac. I think it is Tiger.
If I put this operating system on will I be abel to upgrade it to lion, and if so will I have to pay again?

The Lion Recovery Partition has its own index. Your Macintosh HD partition is the one with the troubles.
If Disk Utility cannot fix it, you may need to apply different Utilities, such as Disk Warrior.
Some readers suggest that the best disk repair is to erase the drive and restore it from your Backups.
This might be a good time to consider getting a new drive to have on hand. This would allow you flexibility in copying, fixing, and (if needed) replacing the drive with the problems.

I have an Imac using the old Classic operating system. The printer I was using died and I need a new printer that will work on the OS 9.1/9.2 operating system. Does the install disk that comes with the printer allow the computer to communicate with the

My printer died and I need a printer that is compatable with OS 9.1/9.2. Some printers say they are compatible with OS 9.1/9.2 but do they need a driver or is it included with the install disk that comes with the printer?

As long as the printer is accurately described as being compatible with OS 9.1/9.2, if it needs to have software (such as drivers) installed that software should either be included (usual) or downloadable from the net(usually from the manufacyrer's website).
Not all non-Apple printers need drivers installed. Some, such as many Postscript ones that connect via ethernet, are quite comfortable using the LaserWriter 8 printware that's part of OS 9. Some of those, though, may need to have a model-specific PPD (Postscript Printer Description) installed, a small document that informs the printware of the capabilities of the printer.

TS1440 Following these suggestions, I startup from the Install Disk holding down C. The installation process proceeds as far as "Checking disks..." (part of Select Destination) but hangs up there: the barbershop pole just spins and spins... What do I do n

Following these suggestions, I startup from the Install Disk holding down C. The installation process proceeds as far as "Checking disks..." (part of Select Destination) but hangs up there: the barbershop pole just spins and spins... What do I do next? This is on an old iBook BTW, 2001 G3, OS X, 10.1.2.

Likely, but can you try to erase it/format it?
   3. Click the Erase tab.
   4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
   5. Select your Mac OS X volume.
   6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to get a good install.
Needs to be Apple Partition Map (APM) partition scheme.

I have lost the install disks that came with my 2011 macbook pro, do i need to pay for new disks?

Hi
Iv lost my install disks for my 2011 Macbook pro and i want to reformat my hard drive. Do i need to buy new discs? I cant find a download on the appstore so i guess i cant download it for free since i have already bought it.
Any Ideas on how to resolve this issue?
Cheers!
Tom.

Yes. Phone Apple Support and order replacements.
(66912)

New Macbook Pro with Snow Leopard, can't check Epson R320 ink levels

Hello,
A lady on the phone at Epson told me how to do this a few months ago, but I've forgotten, and I can't find the secret again. I keep getting "not available".
Anybody know how to do this?
Thank you.

This is a tough one for Epson, too. They are quite helpful, and are going to call me back today, after we were trying to fix this for 40 min. yesterday. A new driver for Snow Leopard is coming, but they want to find a way for me to see ink levels now.

I have iPhone 4 with newest update and Mac laptop with Snow Leopard and current version of iTunes. When I hook the phone up via USB, iPhoto pops open and reads the pictures for import, but iTunes doesn't do anything. Not seeing the device as a USB, either

Sorry, thought that was the body of the question, so the title is long. When I plug in my iPhone 4 (newest update) into my Mac laptop (current version of iTunes, Snow Leopard), it does not read the music, apps, etc., or open iTunes at all. It syncs the pictures, but it doesn't not show as a USB device, either. I have gone through the Troubleshooting assistant, restarting both comp and laptop, using different USB ports, etc. If it is of note, when I look at the option to Sync through Wifi on the phone, it says that sync will happen when my computer (by name) is "available." Not sure if this is a phone issue or laptop, leaning towards laptop, since iPhoto syncs. Willing to buy Lion if that will fix the problem! I would appreciate any help that is given.
Regards,
Lindsey

cynecasey wrote:
... my computer is still running Mac OSX 10.5, because I don't feel the need to buy a new laptop every 2 years.
You have written a very long story, and I admit I have skipped most of it. But I think the question is you are on iOS 7, and cannot get the latest version of iTunes (11.1.5) on your computer because your OS X is too old.
The fact that you chose not to update your hardware does not mean you could not update your software!
OS X 10.5 is very old (about four years). iTunes 11.1.5 (current version) requires at least OS X 10.6.8 to run. Very likely, you could upgrade your computer's software to at least OS X 10.6.8 and then download the current iTunes on it.
You would start here:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Then you would update the OS X 10.6 to OS X 10.6.8 over the air, then download iTunes (or update to a later OS X, as the current version is 10.9.2).

I have installed firefox3.6 on my mac with snow leopard, but firefox will not open when I click on the icon.

It seems that firefox installed correctly, but then it wouldn't open. I restarted my computer and still the same problem. I uninstalled it and reinstalled it and still the same problem.

Also having the same problem.
I have tried the following with no luck.
*Uninstalling and deleting profile + profile.ini then reinstalling
*deleting the .parentlock file
*deleting and reinstalling version 3.6.8.dmg
*Checked the activity monitor that the application isn't listed as running
*Downloaded addtrap and uninstalled again
all with no luck.
Try some of these first as they might fix your problem but not mine! ;)
If anyone knows of something I may be missing I would appreciate any help.
Thanks

I purchased an unclaimed luggage at the airport that had a mid 2010 13" MB-Pro -- It comes up to a boot screen with snow leopard or Windows -- I tried to boot from Optical with Lion install -- it woon't won't boot from the optical drive, help

It won't go to taget disk mode -- I took the drive out and used disk utility to re-partition and format - now I get the folder with a question mark and it still won't boot from optical or usb or go to target disk mode -- I haven't tried installing lion on the disk while it is out and then putting it back in the machine --
according to the serial number, it is still under apple care but since I don't know the person that used to own it I can't get it transferred to me -- or will apple do that since I bought it in an auction?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Can I use applications installed on HDD after booting from new SSD?

Hi! I am a little uninformed and require some MacKnowledge.
Relevant hard/software:
MacBook Pro 17" early '11. Lots of RAM. Slow but large HDD (5400rpm, 750Gb, I think.)
OS 10.7.4
128 Wintec Expresscard SSD.
I recently aquired a 128Gb ExpressCard34 SSD and installed 10.7.4 on it just to see how it "felt."
Wow*.
Now I want to boot on that drive exclusively, but have no idea the best way to migrate over my applications.
I could reinstall all applications fresh (as a 20yr PC vet, this is my natural inclination,) but I have a gut sense this is not needed.
I havent tried it yet, but I am willing to bet that most programs for mac will just start if you click on them. Again, need some knowledge and I dont know whwere to get it.
I really want to run migration assistant so I can just port over all my odd settings; however, I have no idea what control I will have over the actual import.
I actually dont want to physically move any programs just yet. In fact, I want to use most of my non-Apple, personally-installel applications from the HDD. The only program that might be VERY useful to migrate to the SSD would be parallels and the windows VM I keep for VPN and PC-only programs as it is very slow. MAYBE MSoffice as those programs are slow to start up. Also, maybe aperature if it needs to be installed on the ssd to have it's swapfile on that drive. On second thought, that is fine where it is.
I am willing to just get in there and try it out, but I dont want to screw up my HDD install. I would like the separate OS instances to play nice with each other and I am not sure that will happen if i start calling applications from either one (though, obviously, not at the same time.)
So where could I discover what my bounderies are with this situation? Any "best practices?"
*I do want to keep the discussion off the topic of use of expresscard ssd for boot drives, but I felt I should comment further. They have thier pros and cons. I would not be surprised if my new drive fails (also not surprised if it lasts 10xexpected RW cycles.) Nevertheless, the speed is just absolutely amazing. Night and day difference on the "feel" of boot and program load. You can look up the benchmarks if you are inclined.

Thank you for the fast response.
Regarding use of the applications, is it your opinion that simply opening most applications by double-clicking should be sufficient to use them with their current settings. i.e., internal references to ~library/application support/relevant program.plist?
If so, is this universally true, i.e., any and all programs will work?
Regarding migrating settings, are you saying that I can import all my settings WITHOUT importing the programs?
Sorry for my being dense, and supplying a wall of text in the OP.

I have a black macbook from 2006 with snow leopard can I upgrade to mountain lion?

Can anyone help me?

You cannot go to Mountain Lion, as stedman1 states.
But you can upgrade to Lion, possibly. See http://support.apple.com/kb/HT2404

I have a Synology NAS server and a Maxtor HD connected directly to my router. With Snow Leopard I was able to connect through finder directly to the devices and move files accordingly. Now with Lion I cannot connect to either device directly. Solution?

How do you connect to NAS/External HD on router directly with "connect to" command in Finder. Worked in Leopard, but not in Lion?

Carmine From Grand Rapids wrote:
Safari will not open the .pat file.
you'll need to install the .pat from your NAS.
control panel > DSM update > manual update
(open image in new browser window)

I have a late-2008 macbook that is running 10.5.8. I also have a newer macbook that came with snow leopard. Can I use the install disk that came with the newer macbook to update my older macbook?

Similar Messages

Maybe you are looking for