Install Tomcat on Vista, but wrong path
Hi
I am new to Tomcat 6, I installed jdk 5 on Vista, but the jre is 6.
I set the JAVA_HOME : C:\Java\jdk5\bin (I changed the install folder name to be jdk5)
PATH: C:\Java\jdk15\bin
CLASSPATH: C:\Java\jdk15\bin
CATALINA_HOME: C:\Tomcat
When I run C:\Tomcat\bin\startup.bat, it said JAVA_HOME environment variable is not defined correctly. JAVA_HOME should point to JDK but not JRE.
But the path did point to jdk as I install jre5 on C:\Java\jre5.
Any idea?
techissue2008 wrote:
Hi
I am new to Tomcat 6, I installed jdk 5 on Vista, but the jre is 6.Huh?
I set the JAVA_HOME : C:\Java\jdk5\bin (I changed the install folder name to be jdk5)Wrong. Should be c:/Java/jdk5
PATH: C:\Java\jdk15\binIf you can open a command shell, type "java -version" and get back something sensible, then this is correct.
CLASSPATH: C:\Java\jdk15\binWrong. Delete this. Not needed or wanted.
CATALINA_HOME: C:\TomcatIs that where you installed Tomcat?
When I run C:\Tomcat\bin\startup.bat, it said JAVA_HOME environment variable is not defined correctly. JAVA_HOME should point to JDK but not JRE.
But the path did point to jdk as I install jre5 on C:\Java\jre5.
Any idea?Yes, your environment is screwed up. See if those fixes make it better.
%
Similar Messages
-
309g printer will install wireless on Vista but will not install on XP
Trying to install Photosmart 309g printer wireless, will install on computer with Vista but will not install on computer with XP, it finds printer on network but fails part way thur install. Installes great on Vista computer. What can I do??
The steps for XP in this document from HP are a great start to resolving issues of this nature. While the behavior is not exactly identical, the steps have the best chance of resolving the issue.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me a message says "the file location is not a valid installation packaage for the product iTuness. Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes". Any help, insight, guidance would be greatly appreciated!!
"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Try to install iTunes on Vista 64 bit on a clean install but it refuses to install
I download the 64 bit version for install on my PC, but during install i noticed it was being installed to Program files (x86) which confused me. so I changed it to Program files in the setup preferences and proceeded to install. It gets half way through installing and gives up. Am I to guess that iTunes 64 is not really 64 bit at all but a psuedo to give it that impression. If it is going to install into a 32 bit directory then I have no recourse but to assume the latter.
Any ideas how I can get this to install on my Windows Vista 64 bit. Either way it comes up with scripting errors every time I try now. What is needed is an apple cleaner to get rid of elements of the old installs hidden in places like Appdata and the registry as well as hidden MSI scripts which stop subsequent installs.An error occured during the installation of assembly 'Microsoft.VC80.CRT.type="win32="8.0.50727.6195".publicKey Token="1fc8b3b9a 1e 18e 3b".processorArchitechture="x86'''.Please refer to help and support for more information. HRESULT: 0x8007054f.
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 8007054F, or some other number? (If they're another number, what number are you getting?) -
I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Installed j2se on windows xp, updated path, but can't find compiler
I installed j2se on windows xp, updated path, but no matter what direc-
tory I try, when I try to compile(javac) I get the "'javac' is not
recognized as an internal or external command, operable program or batch
file" message. This even happens in the C:\program files\java\j2re1.4_01\bin directory! Anybody know what's up?j2re (run-time env) does not have javac. I ran into same problem with
sdk -- j2se. I invoke following commands if invoking java commands
from DOS cmd.exe window. (You can move these commands in a 'bat' file'.)
@echo off
set JAVA_HOME=c:\jdk1.3.1_06 -- where you installed j2se
set PATH=%JAVA_HOME%\bin;%PATH% -
i neen try to down load the new itunes 10.5 for windows vista but for some reason it is not working at all . this is what it show for the errors is "there is a problem with this windows installer package . a program required for this install to complete could not be run. contact your support personnel or package vendor" plz help me with this!!!!!!!
Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
Start > Control Panel > Programs n Features > highlight ASU and click CHANGE then REPAIR, -
tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
dsharp14 wrote:
tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
What are the specs on your Mac? Top Left Apple Symbol > About This Mac > More Info > Hardware Overview
Thanks
Pete -
I have downloaded and installed Adobe Flash Player, but it was installed to a "disk image". I don't know what that is, but I cannot view anything that requires flash player. What am I doing wrong?
Thanks for your help, but that didn't do any good either. I have been double clicking from the download files, double clicking on the "install adobe flash player", closing the anti virus, closing Safari, watching the install progress and clicking finish. It indicates that "flash player" is installed, but every time I try to view something requiring flash player, it tells me I must download it. It shows up in the "system preference" and from there I can make some changes, but it still won't let me view anything requiring "flash player". It does not show up in my apps like Adobe Reader does. It shows up in the "downloaded files" section of "Finder". I'm getting really perplexed over my inability to get this right.
-
Installed 7.5 on vista but no ringtones
I guess there have been problems installing itunes on vista basic, but I did it without an error message, but there is no Ringtone tab on the left panel. Anyone know why?
Update:
Problem is solved ! The pc was still on the "old" IP address from the previous wifi router. Setting the ip address for internet (Internet protocol version 4 (TCP/IPv4)) on "automatic ip addressdid the tric. Wait a couple of seconds and it connects automatic to the AE. -
I just uninstalled my windows Bootcamp om my Mac and my adobe Cloud (windows) and wanted to install it on OS - but something is wrong?:
After installing Creative Cloud again (OS) and launching Creative cloud I can't get the Apps to work. - What do I do wrong???uninstall, clean and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
or you could translate that error message and more specific (to your situation) info could be given. -
I am trying to install itunes 11.1 but system says error occured run installer again...when I do I get the same thing again. Help
See if this helps you. <br />
https://support.mozilla.com/en-US/kb/unable+to+install+add-ons#Download_Error_228 -
Just installed latest i-tunes but still cannot connect(as usual) showing error (-3212} DESPITE LOWERING FIREWALLS! what does that mean its not in the help columns! HELP!
What make and model of router are you using to connect to the internet, holly?
(Checking, because some have built-in firewalls that can sometimes be related to Store issues.) -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Hello I have downloaded [jakarta-tomcat-4.0.1] and have jdk1.3 installed in c:\jdk1.3\
When I install Tomcat it tells me I do not have a java development kit and advises me to download one.
My autoexec file is as follows:
(I haven't needed to add any classpaths as I use a IDE that knows where the complier is).
@echo off
path c:\windows;c:\windows\COMMAND
SET SNDSCAPE=C:\WINDOWS
set java_home=c:\jdk1.3
Could someone please tell me what is going wrong and edit my autoexec file with the correct path and repost it?
Thanks in advance,
Michael De VormsHi,
I hope my answer will fit your configuration, as I'm using W2K, so no autoexec here...
I don't even have the JAVA_HOME defined in the environment variables, but I had to modify two Tomcat batch files, as follows:
1. In Catalina.bat, I had to modify the entry
SET JAVA_HOME=<java home>
to fit my installation. In your case, you should put:
SET JAVA_HOME=c:\jdk1.3
2. In Startup.bat, I modified the entry
SET CATALINAHOME=<tomcat home>
where <tomcat home> is the home path for your Tomcat installation.
One more thing: I suggest you to define the CLASSPATH in your environment (if you use other classes than those in JDK 1.3), as Tomcat does not access the information your IDE has.
Regards and good luck,
Adrian
Maybe you are looking for
-
Save word comments metadata when converting to pdf?
How do I get Acrobat to save as metadata, the info that I type into a Word.doc's Properties\Comments field? Word's keyword field is so small that it can only contain about 150 characters. It's useless. But Word's Comments field can contain over 1,00
-
I cannot install the Firefox 3.6.12 update because lack of authority. There are three user accounts in the computer. What object(s) can it be that interfere with the update?
-
Dv7t-6000 my recovery partition gone and HP wants $50 to mail me a restore disk.
dv7t-6000 my recovery partition gone and HP wants $50 to mail me a restore disk. Does anyone have a download link for this; it's criminal HP does not offer it to customers free. I already paid for it once when I bought the laptop. thanks
-
Hi, We are converting existing forms application to Oracle ADF application. In one of the existing forms, if we click on F8 key it executes the query and populates the form with the default data. Is there any possibility to trap the F8 key and invoke
-
Can someone help me figure out how to add an image in a Pages 09 file to be used as a background image? Coming from Word I could put an image in a document and then type over it, format it, etc. Can this be done in Pages 09? Thanks!