Installation lock error while uploading meter readings in sap isu

Hi,
Following is the process followed:-
Execute EL35 transaction to generate MRO Print in SAP ISU.
at back end a process is triggered where Meter readings are fetched from a data server and uploaded in the sap isu using BAPI BAPI_MTRREADDOC_UPLOAD as a background process after a propogation delay of a minute after executing EL35.
If the el35 requesting is closed the meter readings get uploaded.
However if the transaction is kept open then we get an error that installation is locked.
Please advice if there is a way to dequeue this lock while trigerring the EL35 transaction in first place..
Regards,
Sarvesh
9920722958

Hi,
Message - 'Format of MR 17737 not valid (MR document number 105677 ) signifies that number of pre-decimal places and number of post decimal places do not match with your register group configuration.
Since, you are suggesting that your logic works in most of the cases, I think when meter overflow happens and while you are converting it to actual read - this reading do not match with pre-decimal and post decimal places.
You need to double click on register group for a device, where you are facing this issue and then compare your calculated read in your code.
Hope this helps.
Regards,
Avinash

Similar Messages

  • Installation Locked error while uploading meter readings in background

    Hi,
    Following is the process followed:-
    Execute EL35 transaction to generate MRO Print in SAP ISU.
    at back end a Meter readings are fetched from a data server and uploaded in the sap isu using BAPI BAPI_MTRREADDOC_UPLOAD as a background process after a propogation delay of a minute.
    If the el35 requesting is closed the meter readings get uploaded.
    However if the transaction is kept open then we get an error that installation is locked.
    Please advice if there is a way to dequeue this lock while trigerring the EL35 transaction in first place..
    Regards,
    Sarvesh
    <Removed contact details>
    Edited by: Suhas Saha on Jul 25, 2011 11:24 AM

    Hi,
    Message - 'Format of MR 17737 not valid (MR document number 105677 ) signifies that number of pre-decimal places and number of post decimal places do not match with your register group configuration.
    Since, you are suggesting that your logic works in most of the cases, I think when meter overflow happens and while you are converting it to actual read - this reading do not match with pre-decimal and post decimal places.
    You need to double click on register group for a device, where you are facing this issue and then compare your calculated read in your code.
    Hope this helps.
    Regards,
    Avinash

  • Error while uploading BITMAP image in SAP through SE78.

    Hello all,
    I am getting below error while uploading image into SAP through SE78.
    'Bitmap file: No color table available (True Color, Bitcount 32)'.
    I have tried searching for solution and got some help from below reply from a thread:
    You may do these options:
    1. Lower the resolution of the image
    2. Lower the file size of the image
    Regards,
    Reymar
    I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
    Thanks in Advance.
    - Jayant Sahu.

    Hi Daniel,
    First of all, if you dont mind, start a new thread for your question please.
    Anyways, answer to your question is --
    You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
    This way, your problem would be resolved.
    Thanks.
    Kumar Saurav.

  • Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

    Hi friends,
    Error while uploading transport request to the transport directory,
    we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
    for example downloaded all co files and data files
    control file: K900470.SAD and Data file: R900470.SAP from transport directory.
    we are trying to upload the transport to another Sap system
    we have
    Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
    Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
    we tried to add in the import queues using TCODE: STMS and trying to import.
    During import we get the below error:
    HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
    End with rc : 16
    Please help me on this
    We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
    Thanks & Regards
    Murali Papana

    Did you see that you tried to transport to an older release!! You should have expected such a result.
    Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

  • Error while uploading meter reads through BAPI_MTRREADDOC_UPLOAD

    Hi,
    I am trying to estimate and upload meter reads on an installation through function module ISU_REGISTER_ESTIMATE and BAPI_MTRREADDOC_UPLOAD respectively. The output estimated read from ISU_REGISTER_ESTIMATE is fed to BAPI_MTRREADDOC_UPLOAD after removing decimal places, comma etc.
    While this works perfectly each time, there is one instance where this arrangement is not working. If the previous read is too large ( and plausible), in certain cases BAPI_MTRREADDOC_UPLOAD fails to upload the next read and gives an error with error description 'Format of MR 17737 not valid (MR document number 105677 ) '.
    As I said, both the function modules are workinf fine most of the times. However at certain instances it ends up with this error. Anyone encountered this problem before?
    All suggestions are welcome !
    Thanks in advance,
    AM

    Hi,
    Message - 'Format of MR 17737 not valid (MR document number 105677 ) signifies that number of pre-decimal places and number of post decimal places do not match with your register group configuration.
    Since, you are suggesting that your logic works in most of the cases, I think when meter overflow happens and while you are converting it to actual read - this reading do not match with pre-decimal and post decimal places.
    You need to double click on register group for a device, where you are facing this issue and then compare your calculated read in your code.
    Hope this helps.
    Regards,
    Avinash

  • Error while uploading MSP project into SAP PS

    Dear Friend's,
    For uploading MSP project into SAP PS we are using openps4MSP version 4.0 & MSP version 2007. incase of SAP PS to MSP downloading is ok.
    While uploading we are getting following error. Also I have gone through relevant notes on MSP PS interface still I am unable to understand what exactly is the missing.
    Action log is as follows.
    The WBS.Maintain BAPI was called.
    - duration in sec.:0.109396699997887
    - return code: E
    - I CJ546 WBS-Dates Create
         Start date is in the past
         - object ID: B1101501000000000 /
    - I CJ546 WBS-Dates Create
         Start date is in the past
         - object ID: B1101500000000000 /
    - E CN009 NetworkActivity Create
         Network 4003941 does not exist
         - object ID: 0000040039410010 /
    - E CN009 NetworkActivity Create
         Network 4003941 does not exist
         - object ID: 0000040039410020 /
    - E CJ280 NetworkActivity Create
         Termination: Too many errors (more than 10% of methods)
         - object ID: 0000040039410020 /
    ERROR test import into PS system failed
    ERROR updating PS project
    Thanks & Regards,
    Suvin

    Hi,
    Which type of scheduling setting have you configured for WBS scheduling and for n/w. ?
    Also, download calendar from SAP to MSP and then add column 'Task Calendar' in which select the downloaded calendar.
    Check SAP NOTE 579761
    Regards,
    Harsh.
    Edited by: Harsh Saxena on Aug 10, 2011 3:18 PM

  • Getting Error While Uploading Clause Document in SAP Sourcing 9.0

    Hi,
    --------------------system description--------------
    SAP Sourcing 9.0
    SAP NW7.31 AS JAVA
    IBM DB2 9.7
    I am getting error while executing clause document.
    ----------------------Error Description---------------
    Login with buyer link into the system-> it has all authorizations
    then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
    it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
    Thanks and Regards,
    Murtaza Najmi

    Hi Gary,
    it is standalone system i have, everything i have installed on one server.
    i have already checked with restarting IIS server, and i can see word service while running url in contractgen.serviceurl, word service is running fine on browser but when i upload the document a popup window comes with error as i have shown above in my query
    Thanks once again Gary for replying
    Thanks and Regards,
    Murtaza Najmi

  • Error while uploading a LOGO into SAP by using SE78

    Hi All
    we are not able to uplaod a LOGO into DEV200 but the same LOGO is successfully uploaded into DEV215. When we tried in DEV200 it is giving the error "ERROR LOADING FILE <PATH>".
    As a Basis/ Security consultant I checked:
    1) Authorizations
    2) Client settings ( in SCC4 ) and System Change Optioin in SE06
    These both are looks fine.
    Can anyone Please help to resolve this issue.
    Thanks and Regards
    Kasi

    Hi,
    Which type of scheduling setting have you configured for WBS scheduling and for n/w. ?
    Also, download calendar from SAP to MSP and then add column 'Task Calendar' in which select the downloaded calendar.
    Check SAP NOTE 579761
    Regards,
    Harsh.
    Edited by: Harsh Saxena on Aug 10, 2011 3:18 PM

  • Error Raised while uploading Excel file to SAP

    Hi All,
    I am getting error while uploading excel file into SAP using the function module 'TEXT_CONVERT_XLS_TO_SAP'.
    Error Message is UX(893) -  'Excel file & cannot be processed' .
    Please let me know what went wrong.
    Regards,
    Deepthi

    Hi,
    1 .TEXT_CONVERT_XLS_TO_SAP  Funtion module will work if you have installed Microsoft Excel at front end.
    2. Whenyou declare internal table for upload, specify the char only in the strcture ,don't specify any data element or dictionary reference.    If the data element and dictionaly reference is character field then its ok.
    eg.
    types:begin of st_data,
               field1 type char15,
               field2 type char23,
              endif.
    3. Close the excel before you upload
    Hope this might solve your issue.
    Regards
    Aromal R

  • Error while uploading standard text files for the Global rule set

    Hi all,
    As part of Post Installation Activities we have uploaded standard text files for business process, functions, risks and rule set obtained with the installable Software.
    While uploading the text files we have uploaded the Basis Functions Authorizations first and then R/3 text files.
    When we checked no actions are appearing in the rule architect under respective functions except for the BASIS Module.
    Is this because we have uploaded the Basis functions before the R/3 text files?If yes, how to replace the Basis with the R/3 ones.
    We tried to replace the Basis function authorizations by re-uploading the R/3 text files again but we got the below error message u201CORA-00001:unique constraint (SAPSR3DB.SYS_C004479) violatedu201D
    Can somebody please help in this regard how to get the standard rule set in our system?
    Thanks and Best Regards,
    Srihari.K

    Hi Sri,
    you should upload first the static text files and the authorization objects first and then the GRC standard rule set files following the instructions of the SAP Configuration Guide available in Service Market Place under http://service.sap.com/instguides .
    The GRC standard rule set contains files named Basis_functions_action.txt and R3_function_action.txt. The first one contains ONLY function definitions in terms of transcation codes for basis only, whereas the second one contains functions definition for basis AND ERP modules. The same holds for the *_function_permission.txt files. There are also function definition files for other SAP solutions such as APO, CRM, HR  etc.
    You can open a customer message and request a deletion script for the rule sets files you have uploaded already. After their application of this script all rule set data will be deleted from your database. If you have uploaded static text and authorization files correctly, you can then upload the GRC standard rule set files as needed again.
    best regards,
    Frank

  • Error while uploading Template

    Error while uploading Template in Internet Procurement Catalog Administrator responsibility
    I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
    This is how header level is in the template and line level has item information.
    #ENCODING     Cp1252                                                  
    Language Section*     EN-US                                                  
    Catalog Section     Supplier*      Title                                             
         FEDERAL INDUSTRIES     Test Catalog     
    ***********When i looked into log file i see error message ********************
    [5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
    [5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
    [5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
    [5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
    [5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
    [5/20/11 9:35:08 AM] <INFO> *********************
    [5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
    [5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
    [5/20/11 9:35:08 AM] <INFO> *********************
    [5/20/11 9:35:08 AM] <INFO> Job failed
    [5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
    I already had language section in the template as shown above, not sure why it is giving error.
    could you please let me know how to troubleshoot
    Edited by: 855902 on May 20, 2011 5:02 PM

    Hi,
    We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
    You can refer below URL:
    http://appswork.blogspot.com/2009/09/catalog-loader.html
    /S.P DASH

  • Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

    Hi Guys,
    I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
    Maximum Size set in Our SYSTEM is :9765MB.
    Approx size of the Document tried is more then 300MB.
    Appreciate your help on this.
    Regards
    Tarun

    Hi Tarun,
    Please check the below system properties using system user login
    attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
    attachments.upload.enable.buyers-  " Enable/Disable uploading of attachments by internal users"
    Also Please check with other attachment, contracts related properties in the System.
    Let me know if this helps.
    Thanks,
    Raj.

  • Error while uploading Transport request

    Hi friends,
    Error while uploading transport request to the transport directory,
    we downloaded the trasnport request from one sap system which have a set of developments
    for example downloaded files are;
    control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
    we are trying to upload the transport to another Sap system
    we have
    Uploaded  the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
    Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
    we tried tro  add in the import queues using  TCODE: STMS
    and trying to import.
    During import we get
    error:
    HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
    End with rc : 16
    Please help me with the problem.
    Thanks in advance
    Deepak

    Hi,
       Check the versions of the two sap systems you are downloading and uploading the transport requests

  • DB Connect Load - "Unknow error while uploading data from the DB Table"

    Hi Experts,
    We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
    I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
    At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
    Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
    Please advice.
    Thanks,
    Abhijit

    Hi,
    Sorry for bumping an old thread ....
    Did this issue get ever get resolved?
    I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
    One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
    I get "Unknown Error" whenever I trigger the data package.
    Advait

  • Getting error while uploading a document in a library

    Hi,
    I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
    It reads:
    The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
    How to resolve this ? I have referred many articles on this one, but none helped.
    Thanks for your response in advance.
    Regards

    Hi Prajk,
    Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
    If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
    http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
    If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
    If above cannot work, please check ULS log for detailed error message.
    For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for