Installation of Infrastructure

I am in the process of installing the Oracle Collaboration Suite on Red Hat linux. I am going through the first part of the installation which is the Infrastructure piece. Everything is going well until it tries to install the Internet Directory Configuration Assistant. At this point the status column says "canceled" and the details box has "no output available for this tool". From here many of the other tools fail but I feel it maybe related to the Internet Directory Configuration Assistant failing.
Not sure why this is happening. Any help would be greatly appreciated.
Thanks for your time,
Jason

Jason,
I'm not sure about your exact problem, however, I got hung up on the OC4J Instance Configuration failing. It turned out that my /tmp directory was too small (only 100 Mbyte). I increased it to 1 Gbytes and life got better. Don't know, it may be related. You can also set the TMPDIR environment variable to point to somewhere with a lot of disk space instead of increasing /tmp.
Good Luck,
John

Similar Messages

Installation Grid Infrastructure for RAC using UDEV fail

Hi experts,
I want to install RAC for testing using UDEV, VirtualBox and Linux 5.8 64 bit.
I fail at installation Grid Infrastructure(ASM). At the Step 5 of 9 - Create ASM Disk Group, the installer don't display any disk to create ASM diskgroup.
I think UDEV have been configed correctly. The following are the UDEV configuration:
"/etc/scsi_id.config"
vendor="ATA",options=-p 0x80
options=-g"/etc/udev/rules.d/99-oracle-asmdevices.rules"
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="SATA_VBOX_HARDDISK_VBb1141d78-3196a201_", NAME="asm-disk1", OWNER="oracle", GROUP="dba", MODE="0660"
KERNEL=="sd?1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/$parent", RESULT=="SATA_VBOX_HARDDISK_VB748d0eea-d6385be2_", NAME="asm-disk2", OWNER="oracle", GROUP="dba", MODE="0660"ls -al /dev/asm-disk*
brw-rw---- 1 oracle dba 8, 17 Mar 30 21:44 /dev/asm-disk1
brw-rw---- 1 oracle dba 8, 33 Mar 30 21:44 /dev/asm-disk2Any sugestion for me? Please help...
Thanks and best regards,
Hai Mai.

Try this one.
1. Find the WWID of the disk
# /sbin/scsi_id -g -u -s /block/sdb
SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_ Here we got an WWID of 'SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_'.
2. Create an custom UDEV rule
Create a new rule under /etc/udev/rules.d/, for example, /etc/udev/rules.d/99-oracle.rules.
Ensure the file name lists after the default 50-xxx.rules file. The filename must end in ".rules" to be recognized.
KERNEL=="sd*1", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/%P", RESULT=="SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_", RUN+="/bin/raw /dev/raw/raw1 %N"
KERNEL=="sd*2", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/%P", RESULT=="SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_", RUN+="/bin/raw /dev/raw/raw2 %N"
KERNEL=="sd*3", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s /block/%P", RESULT=="SATA_VBOX_HARDDISK_VBbb8af1a8-4d4db09b_", RUN+="/bin/raw /dev/raw/raw3 %N"
ACTION=="add", KERNEL=="raw*", OWNER="oracle", GROUP="oinstall", MODE="0664"The RESULT filed was the WWID of your hard disk found in step 1.
Please also subsititue the value of 'OWNER', 'GROUP', and 'MODE' to your actual one.
3. Restart the UDEV service
# /sbin/start_udev And then, you are free to use /dev/raw/raw1, /dev/raw/raw2, and /dev/raw/raw3 as your RAC OCR and Voting Devices.
Thanks,
Kods

Selecting custom namespace during installation of Infrastructure

I'm performing a new installation of Oracle Application Server Infrastructure and Middle Tier.
I'm uncertain of what I should specify as my namespace during installation.
Some information on my setup (changed names for posting):
Server1:
hostname: vadar.mycompany.com
serving: Application server infrastructure
Server2:
hostname: ginger.mycompany.com
serving: application sesrver middletier (portal)
When installing the infrastructure it gives a suggested namespace of:
dn=com, dn=mycompany, dn=vadar
should i keep the default or change the namespace one level up to just dn=com,dn=mycompany?
I was reading documentation online at:
http://download.oracle.com/docs/cd/B32265_01/install.1014/b32091/infra.htm#BABEBIAE
Which said:
4.16 What Do I Enter in the "Specify Namespace in Internet Directory" Screen?
The distinguished name (DN) that you specify on this screen will be designated as the namespace in Oracle Internet Directory where users and groups are administered.
Select the suggested namespace if it meets your deployment requirements. If not, enter a DN that you want in the custom namespace field. The installer determines the suggested namespace from the /etc/hosts file. See Section 2.11, "The /etc/hosts File".
If you plan to integrate your Oracle Identity Management components with a third-party directory, you should specify the DN of a namespace that matches the DN of the default namespace in the third-party directory. See the Oracle Internet Directory Administrator's Guide for details on integration with third-party directories.
I am also running Active Directory and will be integrating the two. (myad.mycompany.com)
Any input would be greatly appreciated.
Thanks!

If noone really has a suggestion on the selection then can someone pointme in the direction of documentation on changing the namespace after the fact incase the original selection was incorrect?
Thanks ahead of time.

Dcmctl returns ADMN-202001after installation of Infrastructure

Hi all,
I have installed Oracle9iAS Infrastructure 9.0.2.0.0 on WinXP, and applied a patch to upgrade it to 9.0.2.3.
When I try to bring it up, e.g
%ORACLE_HOME%\dcm\bin>dcmctl start -v -ct ohs
I get:
ADMN-202001
Base Exception:
java.lang.NullPointerException:null
check the detail of the exception.
In the %ORACLE_HOME%\dcm\logs\logs.xml file, I get:
<MSG_TEXT>[TM] initialization failed for c:\oracle\ora9ias_infr</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.NullPointerException
     at oracle.ias.sysmgmt.persistence.PersistenceManager.getPersistenceFarm(PersistenceManager.java:1711)
     at oracle.ias.sysmgmt.persistence.PersistenceManager.updateOnsConfig(PersistenceManager.java:341)
     at oracle.ias.sysmgmt.task.TaskMaster.initRepository(TaskMaster.java:268)
     at oracle.ias.sysmgmt.task.TaskMaster.<init>(TaskMaster.java:176)
     at oracle.ias.sysmgmt.task.InstanceManager.sysInit(InstanceManager.java:164)
     at oracle.ias.sysmgmt.task.InstanceManager.init(InstanceManager.java:66)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(DcmCmdLine.java:3880)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(DcmCmdLine.java:4706)
]]></SUPPL_DETAIL>
As a consequence, I can't bring up the Http server or SSO, which means I can't install the Application Server (Portal and Wireless installation).
Any ideas and suggestions are appreciated.

Re-installation resolved this problem.

Converting 9ias installation with infrastructure to standalone version

I have a 9ias web server which runs OC4J applications that was installed against an infrastructure server and which uses that server via OID to connect to the oracle databases.
The infrastructure server was to be used to administer SSO but this is no longer required. Is it possible to remove the link between the 9ias web server and the infrastucture and turn it into a standalone version ? If so how do I do it ?.
Regards,
Chris

dcmctl LeaveFarm

Installation of Oracle AS 10g on Red Hat ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0 (All issues are cleared and u will b done with no error like Java Configuration Failed and make files errors)
Red Hat Enterprise Linux 3 Custom Installation
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

Installation of OracleAS 10g on Red Hat Linux ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0
Red Hat Enterprise Linux 3
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan Ali
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

How to run portal with business intelligence installation?

i have a system suse linux enterprise edition 7.3. and my hardware is p4 cpu 1 gb memory and 80 gb hdd.
i installed oracle9ias r2(9.0.2) . my installation is "business intelligence".but my aim is to run oracle9iportal."
my directory structure is
/opt/oracle/infrastructure
/opt/oracle/applicationserver
/opt/oracle/appserver
one infrastructure and two applicationserver on one host.
i read the Oracle9i Application Server Administrator's Guide
Release 2 (9.0.2)
i have some questions
1-You can install multiple application server installations and infrastructures on the same host. Each must have its own Oracle home.
if so why do i need to change all times "@ORACLE_HOME" path according to others.? is there another solution
2-which steps do i follow to run portal?
3-must i run infrastructure structure before starting application server ?
best regards
1-

Hi Dharani,
Please check this thread.
How will do the connectivity with SAP and Non Sap System
Also ensure you avoid cross-posting. This has been mentioned to you multiple times earlier.
Cheers,
Sandeep Tudumu

Installing Grid Infrastructure 11.2.0.2 fails on Oracle Linux 5.6 and 6.0

Hi all,
We are in the process of building our new enterprise environment and tried to install the following:
Oracle Linux 6.0
Grid Infrastructure 11.2.0.2
ASM
OCFS2
Oracle RDBMS 11.2.0.2
Installation of Grid Infrastructure failed on Oracle Linux 6.0 and 5.6 as well. Is it because it's not yet certified for these Oracle Linux versions? Where can we find compatibility matrixes or certification information to find out which versions do work together? Been trying to find them with no success.
Thanks for any help!

Dude wrote:
I have recently installed Oracle 11.2.0.2 including ASM, which also installs Grid infrastructure under Oracle Linux 5.6 (default UEK kernel) without any problems. I installed the oracle-validated package prior to the Oracle installation.OEL 5.6 and 11.2..02 Grid Infrastructure installation (for x86_64) failed in our case. Have opened a SR several weeks ago for it, but no resolution. We since reverted back to OEL 5.5 for building and running this specific RAC.
There's also errors in OEL 5.6's Infiniband s/w stack. The openibd service fails to apply errata correctly because the o/s command used has since changed command line parameters. My guess is that testing happened solely on new h/w where this errata did not have to be applied, thus were not tested. Also, this service failed to start the srp_daemon (is critical for making sure that the storage layer works each and every time and does not cause stale connections that lead to command rejections from the storage server after a reboot of a RAC node)
I not only had to fix the openibd service to correctly apply the errata, but also write a separate srpd service that dealt with starting up and shutting down the srp_daemon.
Not very impressed with OEL 5.6 at all and it will be unlikely that we'll use it. And it raises a lot of concern whether OEL 6 would be a robust enough o/s for running our RAC systems.

Problems : Oracle 9iAS Installation Windows XP Home Edition

Hi All,
I just installed Oracle 9iAS on Windows XP Home Edition.
Can anyone give me some idea how to resove the issues with the installation.
Infrastructure Database Registration Assistance - Canceled
Please provide either oidpassword or obfuscated password
Usage: java oracle.ias.ldaporacfg.LdaporaCfg Parameters
Parameters are -o OracleHome -h oidHost -p oidPort -u oidUser -w oidPassword -d obfPassword
Infrastructure Schema Configuration Assistant - Failed
Some of the Config Tools failed. See the log file useinfratool.log for more details.
1) Infrastructure Instance Configuration Assistant - Failed
Some of the Config Tools failed. See the log file useinfratool.log for more details.
2) Oracle 9i Application Server randomize password - Failed
java.lang.NumberFormatException: %OIDport%
3) Single Sign-on Configuration Assistant - Failed
Parameters passed to ssoca : param0:C:\oracle\as param1:orasso param2:***** param3:aurigadatamart.pacbell.net param4:389 param5:cn=orcladmin param6:***** param7:aurigadatamart.pacbell.net param8:1521 param9:mat param10:AMERICAN_AMERICA.WE8MSWIN1252
Failed to obtain OiD password. Exception is :java.lang.Exception: Version mismatch!
Thanks in advance for your kind help!!
Ramesh

XP is not a supported platform. Please try Win2K or NT.
See certification matrix:
http://otn.oracle.com/software/products/ias/files/20_certification.html
Hope this helps,
Ashesh Parekh
Oracle9iAS Product Management

Succes installing 9iAS R2 (release 2) on RedHat Linux 7.3

I had success installing 9iAS release 2 on RedHat Linux 7.3. I used the instructions on http://www.puschitz.com/OracleOnLinux.shtml.
At first, I tried this on RedHat 8.0. Funny thing is: installation of infrastructure failed even though I followed the instructions. Then I downloaded 7.3, followed EXACTLY the same instructions and voila, works like a charm.
Puschitz' instructions are for 9i and not for 9iAS though. Some additions:
1) One of the pre-installation steps there says to set some environment variables, one of them being the SID. It's set to 'test', but of course with standard settings the sid of the database that comes along with 9iAS has a SID of 'iasdb'.
2) Also what I did, was to downgrade the binutils package to the version provided by Oracle here: http://otn.oracle.com/software/products/oracle9i/files/binutils_readme.html. As an alternative, Puschitz says to change some makefiles. I didn't try this.
3) I then installed the infrastructure. When finished, I exited the installation and rebooted. After the reboot:
4) I changed to the /bin directory and typed (as root):
ln -s /sbin/fuser
5) Changed back to user 'oracle' and started the infrastructure with:
$ORACLE_HOME/bin/sqlplus
connect / as sysdba
startup
exit
$ORACLE_HOME/bin/lsnrctl start
$ORACLE_HOME/bin/oidmon connect=iasdb start
$ORACLE_HOME/bin/oidctl connect=iasdb server=oidldapd instance=1 start
$ORACLE_HOME/opmn/bin/opmnctl startall
6) Then started the installer and did the middletier installation. Rebooted.

Following your instructions i've also succesfull installation of ias9iR2 Infrastructure on Redhat7.3. Checked the database Iasdb and Enterprise Manager Website (on http://liminwang:1810), everything works fine. Hence i try to install Portal & Wireless on the same machine on a different Oracle_home (but on the same Oracle_base) according to the installation guide. The installation stuck when i've chosen the Portal and Wireless option. I get a warning that the Enterprise Manager Website Process is still running and it must be stopped to proceed the stallation. So i stopped this process by: $oracle_home/bin/emctl stop
Still i get the same warning. Stopping the database also doesn't help. Even when i deinstalled the Enterprise Manager Website component i get the same warning.
Please help!

Problem with Application Server Portal 9.0.2.0.1.

I have a problem with Application Server Portal and Wireless 9.0.2.0.1.
Firstly I've installed the infrastructure on a Pentium 3 866Mhz 512Mb of Ram, with Windows 2000 Server (Italian) service pack 2.
I've maintained all predefined settings and I've chosen the UTF8 character set.
After installation, my infrastructure and OID works fine. The OID has port 4032 (as set by Oracle Universal Installer) instead of predefined 389.
After this I've installed Application Server Portal and Wireless on another host: a Pentium 3 733Mhz 384Mb of Ram, with Windows 2000 Server (Italian) service pack 2.
I've also maintained all predefined settings and automatic configuration of Portal and Wireless. I've pointed to my Infrastructure.
Try to test the Portal demonstration but an error occurred:
"SERVICE TEMPORARILY UNAVAILABLE. The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later."
On my EM Console I see: component instances 'OC4J_Portal' and 'OC4J_Demos' are UP, instead 'Portal:portal:7777' is down.
On the component lists I've clicked the link of component instance Portal:portal:7777, the 'control services' and 'Accessible Server SSO' are started, while 'Accessible Portal Repository' is down.
What can I do to get my portal started?

hi,
i have exactly the same problem. did you solve yours?
any suggestions or help how to do it?
thanks
erik
please reply to this post or [email protected]

Regarding ASM in Oracle 11g

Hi
I would like to use ASM storage for my single instance oracle 11gR2 database. I am a little bit confused so that asking some question about Oracle 11g ASM.
1. Does Grid Infrastructure mandatory for installation Oracle 11g ASM instance?
2. Without installation Grid Infrastructure can I full fill my requirements ?
Regards
Rabi

"If you plan to use Oracle Restart or Oracle Automatic Storage Management (Oracle ASM), then you must install Oracle Grid Infrastructure before you install and create the database. " -- http://docs.oracle.com/cd/E11882_01/install.112/e47689/oraclerestart.htm#LADBI999

Error 2001 on iPhone5 running newest OS , how to solve issue

All of a sudden my iphone5 went black when charging just shows blinking apple sign.
With help form web forum i put phone in DFU mode and went to Itunes . Phone plugged in running dfu shows itunes connection.\
Itunes (latest version) asks to restore phone. OK.. do you accept loss of data blabla.. Yes.
Itunes tells me dowlading software for restore. extractiong software for restore . Then... Big notification:
Iphone can not be restored. An unknown error has occured (2001)
I run lastest software, have pulled all usb connections, use mac for itunes, apples cords etc nothing that could trigger hardware issue due to not being apple.
Anybody have an idea??
would really appreciate help!

Folks,
Hello. Thanks a lot for replying.
I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
1) Install Grid Infrastructure for a Cluster
2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
My question is:
How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ?

FRM-92101: Load Balancing Forms 10g with Web Cache

Hi,
IÂ´m having some problems with Oracle Forms and Webcache 10g and I was wondering if you
could help.
Machines: (Pentium IV 2.6 GHz; 2GB RAM; 80GB HD)
A. Red Hat Linux AS 2.1
Oracle AS 10g - Infrastructure Installation
B. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
C. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
I didnÂ´t apply any Patchsets of Oracle AS 10g. My current version is 9.0.4.0 .
Goal:
Use Oracle Webcache 10g on machine B for Load Balancing an Oracle Forms Application
on machines B and C.
Facts:
The Oracle AS 10g installation on the 3 machines was made without problems.
The Forms Applications are running without problems on both Forms servers in machine B and C.
Symptoms:
IÂ´m getting the following error when I try to acces the forms application through Webcache:
FRM-92101: There was a failure in the forms server during startup.
This could happen due to invalid configuration.
Please look in the web-server log file for details.
But, this error happens ONLY when BOTH OC4J_BI_Forms instances (machines B and C) are
running.
When just one of the OC4J_BI_Forms is running everything works fine.
Webcache Configuration:
IÂ´ve followed Metalink note 207668.1: Configuring Web Cache as a Load Balancer for Application Servers
step by step to make the configuration of the following components:
1. Configuration of the origin servers
2. Configuration of Site definitions
3. Configuration of Site to server mapping
After that, IÂ´ve follwed the Metalink note 229900.1: Integrating and using Web Cache with Forms 9i for Load Balancing
step by step to make the configuration of the following components:
4. Session Binding
Then I try to test the Load Balancing and I got the error FRM-92101 when both OC4J_BI_Forms
instance were running.
IÂ´ve searched Metalink and found note 268830.1: Webcache Won't Load Balance 2 Forms Instances.
Following the note instructions I did the following changes:
Added these lines at the end of HTTPD.conf (machine B):
CookieTracking On
CookieName myformscookie1
Added these lines at the end of HTTPD.conf (machine C):
CookieTracking On
CookieName myformscookie2
In Webcache configuration:
IÂ´ve Changed the default session binding from JSESSIONID to "ANY SET COOKIE" for the
site's session binding.
But even after these changes IÂ´m getting FRM-92101 error on the same conditions.
How can I solve this problem ?
Thank you in advance.
Marcus Santos.
([email protected])

Just ran into this problem last Tuesday, Nov.30 and applied the changes today.
My configuration is similar to yours: 9.0.4 web cache on machine A, 9.0.4 10gAS forms and reports standalone on machine B and C (not a cluster, no infra).
I appended the Cookie lines you mentioned in httpd.conf located in $ORACLE_HOME/Apache/Apache/conf in both machines B and C.
One important thing you may have missed. After changing httpd.conf in each 9iAS instance, you need to make the change known to dcmctl so issue:
dcmctl updateConfig -ct ohs
Then do the following for each 9iAS instance and it should be ready for webcache:
dcmctl stop
dcmctl start
Setup Any-set-Cookie in webcache instead of JSESSIONID and the whole thing should now work. You can run a form through machine A which will load balance to either machine B or C (which can both be up). Then, try shutting down 9iAS on machine B or C and run a form again. They now all work.
HTH,
Raffy

Installation of Infrastructure

Similar Messages

Maybe you are looking for