Installation troubles on Oracle 10g

I got an error message when installing Oracle 10g: Failure initializating OCR.
That was not a problem to finish the installation, but after that I noticed that the OracleCSService service (C:\oracle\product\10.1.0\db_1\bin\ocssd.exe service) was not initialized and I cannot do it in anyway.
I don't know if this is the reason of another trouble: I can't create a database, the system notifies me:
ORA-28547: Connection to the server failed; possible admin NET8 error.
I can't creat a Net service too. Anybody knows what is that? What can be the reason for the service not to start ? What could be wrong with NET8?
Thanks in advance.

Hi,
You installed the product
You have set the environment variables
Now,
How are you trying to connect?
Have you created a database?
Have you configured the NET Services?

Similar Messages

SAP R/3 4.6C Installation in HPUX /oracle 10g - Error ORADBUSR_IND_ORA

Hi all
While installing 4.6C in Oracle 10g/HPUX, I get the below error towards the end.
Can some help me to over come this error
Regards
Senthil
. Oracle Version:                     10.2.0.2.0
. Parametervalue os_authent_prefix:   OPS$
. Schema Id:                          R3
. Database User (Schema):             SAPR3
. SAP R/3 Administrator:              OPS$SUPADM
unable to assign default tablespace to user: SAPR3
begin
ERROR at line 1:
ORA-00959: tablespace 'PSAPUSER1D' does not exist
ORA-06512: at line 90
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
ERROR 2008-03-11 20:15:46 ORADBUSR_IND_ORA ExecuteCheck:0
    Exit code from /oracle/SUP/102_64/bin/sqlplus: 191.
ERROR 2008-03-11 20:15:46 ORADBUSR_IND_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2008-03-11 20:15:46 ORADBUSR_IND_ORA InstallationDo:0
    Phase failed.
ERROR 2008-03-11 20:15:47 Main
    Installation aborted.

After editing the sql script
Edit the oradbusr.sql file in the installation directory and change
the row
if substr(upper('&&1'),1,5) = 'SAPR3' then
to
if substr(upper('&&1'),1,5) = 'SAPR3notCorrect' then
not supported:
Schemaowner has to be SAPR3 or SAP<SID> where <SID>
has to be a three digit Identifier starting with a character
begin
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at line 32
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
ERROR 2008-03-12 09:32:34 ORADBUSR_IND_ORA ExecuteCheck:0
    Exit code from /oracle/SUP/102_64/bin/sqlplus: 110.
ERROR 2008-03-12 09:32:34 ORADBUSR_IND_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2008-03-12 09:32:34 ORADBUSR_IND_ORA InstallationDo:0
    Phase failed.
ERROR 2008-03-12 09:32:34 Main
    Installation aborted.
Can you help
Regards
Senthil

Installation errors with Oracle 10g Express Edition client.

Hi,
I want to use the Oracle 10g XE client on my Ubuntu (Lucid) laptop. I am following the installation instructions as mentioned at Installing Database Oracle XE Client. When I run the .sh file for my bash shell, I keep getting this error message:
root@machine:/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin# . ./oracle_env.sh
/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin/nls_lang.sh: 112: [[: not found
/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin/nls_lang.sh: 112: [[: not foundAnd, when I look up nls_lang.sh at around line 112, I see this:
# Detertmine the LANGUAGE_TERRITORY part of NLS_LANG
# we derive it from the current locale by inspecting the LC_ALL and
# the LANG environment variable. Other LC_* environment variables
# are not inspected.
if [[ -n "$LC_ALL" ]]; then
locale=$LC_ALL
elif [[ -n "$LANG" ]]; then
locale=$LANG
else
locale=
fiHow do I get the client working ?

So, I have been searching around to look for a method to enable the client installed on my laptop to connect to the database. Granted that, the server is not installed on my local machine. But, I am simply, unable to find any clues as to how do I specify the database name that the client should connect. The ORACLE_SID parameter needs to hold a database name; but, where are the IP address and port number mentioned for the database ? One site recommended that tnsping be used to check for database existence; whereas, tnsping is not installed. Then, the commonest hint that I keep bumping into - TNSNAMES.ORA file. Since I have only the client installed, I don't even see the network/admin folder (or whatever the path is to the .ora file) under /usr/lib/oracle/xe/app/oracle/product/10.2.0.
It can't be this hard to connect to an Oracle server with only a itsy-bitsy Oracle installed on my local machine, hmmm ?

Installation problem with oracle 10g release 1 in RHEL ES 4 platform

Hi,
I am facing such a problem. I want to install Oracle 10g release 1.
I am using linux 86_64
os is RHEL ES 4 UPGRADE 5 X_86_64
When i put the command ./runInstaller It shows os is not supported.
Is there any way to install this oracle version.
Can u please suggest which version os is suitable for this.
please suggest.
Thanks & regards

WHICH 10gR1 software do you use? Oracle provides different versions, you need 10.1.0.3 for Linux x86-64 from the OTN download page.
By the way I would install 10gR2.
Werner

Crs installation problem in oracle 10g rac with NAS storage

Hi,
for my practice i am trying to install oracle 10gR2 on RHEL5-64bit OS in my laptop.
during my crs installation i have struckup with the below error while i am executing root.sh in node1.
Error:
+++++
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1: Failed to initialize ocrconfig
Failed to upgrade Oracle Cluster Registry configuration
ocrconfig.log ;
++++++++++++
NFS file system /u01 mounted with incorrect options
[ OCROSD][4265610768]WARNING:Expected NFS mount options: wsize>=32768,rsize>=32768,hard,(noac | actimeo=0 | acregmin=0,acregmax=0,acdirmin=0,acdirmax=0
[ OCROSD][4265610768]utopen:6m'': OCR location [share/storage/ocr] configured is not a valid storage type. Rturn code [37].
As per metalink i have find that this problem is fixed with Patch:4679769
# Patch Installation Instructions:
# To apply the patch, unzip the PSE container file:
# p4679769_10201_LINUX.zip
# Set your current directory to the directory where the patch
# is located:
# % cd 4679769
# Copy the clsfmt.bin binary to the $ORACLE_HOME/bin directory where
# clsfmt is being run:
# % cp $ORACLE_HOME/bin/clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin.bak
# % cp clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin
# Ensure permissions on the clsfmt.bin binary are correct:
# % chmod 755 $ORACLE_HOME/bin/clsfmt.bin
3. Run the root.sh script and proceed with the installation.
**My question is still i am not install Database ..only i ma trying to install crs but in this readme .txt we need to replace the clsfmt.bin file in ORACLE_HOME/bin.**
**but i have not bin directory under in ORACLE_HOME.please clear my doupt to apply this patch...**
Regards,
Mugunth

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Problems with Cluster Ready Service installation (RAC) in Oracle 10g R1

Hello
I have got problems with this installation. I am starting Oracle user
At the end of the installation I get a mesage when all Configuration Assistants are failed
I have got 2 computers with Windows 2000 PRO, two networks (private and public)
As a shared disk I use one external disk (with USB) attached to one computer.
What to do here?
please for a reply
Martin
PROT-1: Failed to initialize ocrconfig
SCLS error 1 reading current privileges.
Internal Error Information:
Category: 1234
Operation: scls_iddb_has_privgrp_by_name
Location: NetLocalGrou
Other: get local group failed
Dep: 0
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
ignoring upgrade failure of ocr(-1)
failed to configure Oracle Cluster Registry with CLSCFG, ret 102
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Notification Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/racgons.exe add_config migi:4948'
Start output from spawned process:
End output from spawned process.
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Private Interconnect Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:cluster_interconnect "public"/192.168.1.0:public'
Start output from spawned process:
PRIF-12: failed to initialize cluster support services
End output from spawned process.
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
PRIF-12: failed to initialize cluster support services
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
User Selected: Yes/OK
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Installation Trouble with Oracle BI Discoverer Desktop and Discoverer Administrator 11.1.1.3.0

Hi All,
I'm having installing this software on my Window's 8.1 64-bit machine. I'm going to Disk1 > Install > Win64 > setup.exe. The Oracle Universal Installer shows up, passes the swap space and monitor checks, and stays on "Preparing to launch Oracle Universal Installer from C:\Users etc.... Please wait ..." for a few seconds. It then promptly closes and does absolutely nothing. I've tried the setup.exe from the Win32 bit folder, and that opens perfectly fine (unfortunately mines 64-bit). I've tried running as Administrator, in compatibility mode (all of them), and even updated Java. Does anyone know of a solution?
Also, I have a 32-bit Windows XP virtual machine installed, and when I tried it there, I encountered the same problem. This time with the 32-bit setup.exe.
Thanks,
Neville

Try
https://hostname:8090/discoverer/viewer
https://hostname:8090/discoverer/plus

Installation issue with Oracle 10G Express Edition

I have installed both this product and the Enterprise Manager in the past (on the same laptop that I am using now), however when I try to download the file for my current class I get a dialog box that tells me that the file type is unknown and Windows does not recognize it. I am 3 weeks into the class have not been able to simulate any of the exercises because I cannot download the product. I am working on Windows Vista (ughh! same OS I used in the past), any help would be greatly appreciated.

Did you try downloading from the below link?
http://www.oracle.com/technetwork/database/express-edition/downloads/102xewinsoft-090667.html

Error in oracle 10g DB installation in power on linux

Hi
Iam installing oracle power on linux 10g(10.2.0.1.0) DB on IBM power on linux update 4 (2.6.9-42.EL kernel). I made
all the pre-requisites as mentioned in Doc. I am getting a make failure error:
Error in invoking target 'relink' of makefile .../precomp/lib/ins_precomp.mk.
on ignore that getting the error ins_rdbms.mk. please assist me how to resolve
this error.
Following are the packages installed
binutils-2.15.92.0.2-21
compat-libstdc++-33-3.2.3-47.3
make-3.80-6.EL4
gcc-3.4.6-3
gcc-ppc32-3.4.6-3
gcc-c++-3.4.6-3
gcc-c++-ppc32-3.4.6-3
glibc-2.3.4-2.25
glibc-2.3.4-2.25
glibc-devel-2.3.4-2.25
glibc-devel-2.3.4-2.25
libaio-0.3.105-2
libaio-0.3.105-2
libaio-devel-0.3.105-2
libgcc-3.4.6-3
libgcc-3.4.6-3
libstdc++-3.4.6-3
libstdc++-devel-3.4.6-3

Solution : Install and Configure Microsoft LoopBack Adapter:
Installation of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Add Hardware and then Click Next.
3. Click Install the hardware that I manually select from a list, and then click Next.
4. Click Network adapters, and then click Next.
5. In the Manufacturer box, click Microsoft.
6. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
7. Click Finish.
Configuration of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Network and Sharing Center.
3. On the left side of the Window, Cick Manage Network Connections.
4. You will find a name like "Local Area Connection 4 Unidentified Network Microsoft Loopback Adapter".
5. Right Click on it and select Properties.
6. Then Click on Internet Protocol Version 4 (TCP/IPv4) and then again click Properties.
7. Click on Use the following IP address and enter 192.168.1.10 for the IP Address and 255.255.255.0 for the subnet mask.
8. Click OK.
After this you can continue with the installation of the Oracle 10g again.

Error in Oracle 10g Installation windows 2000 advance server

Hi,
I am facing error message below when try 2 install oracle 10 in my work station . Already 8i and 9i with forms and reports was there in my machine. The follwing error display in log file.
Actual Result: 4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 503MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
After given an ip address and proceeded. This error message is displayed in trace file:
Shutting down instance: further logons disabled
Mon May 07 11:32:09 2007
Stopping background process CJQ0
Mon May 07 11:32:09 2007
Stopping background process MMNL
Mon May 07 11:32:10 2007
Stopping background process MMON
Mon May 07 11:32:11 2007
Shutting down instance (immediate)
License high water mark = 1
Mon May 07 11:32:11 2007
Stopping Job queue slave processes
Mon May 07 11:32:11 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon May 07 11:32:16 2007
alter database close normal
ORA-1507 signalled during: alter database close normal...
The error message in udump trace file is as follows:
Dump file e:\or10g\product\10.2.0\admin\or10g\udump\or10g_ora_2340.trc
Mon May 07 11:26:03 2007
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:4M/503M, Ph+PgF:9M/1327M, VA:1740M/2047M
Instance name: or10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2340, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=00000000
There is no pfile or anything in admin directory. Kindly help me in installing 10G for testing please
efshafi

Solution : Install and Configure Microsoft LoopBack Adapter:
Installation of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Add Hardware and then Click Next.
3. Click Install the hardware that I manually select from a list, and then click Next.
4. Click Network adapters, and then click Next.
5. In the Manufacturer box, click Microsoft.
6. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
7. Click Finish.
Configuration of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Network and Sharing Center.
3. On the left side of the Window, Cick Manage Network Connections.
4. You will find a name like "Local Area Connection 4 Unidentified Network Microsoft Loopback Adapter".
5. Right Click on it and select Properties.
6. Then Click on Internet Protocol Version 4 (TCP/IPv4) and then again click Properties.
7. Click on Use the following IP address and enter 192.168.1.10 for the IP Address and 255.255.255.0 for the subnet mask.
8. Click OK.
After this you can continue with the installation of the Oracle 10g again.

SQL 2008 Problem Calling an SP on an Oracle 10G Linked Server

Hi everyone
I've read through a number of posts on many sites about this issue but haven't found anything that has helped me so far. The machine I'm using is running Microsoft SQL Server 2008 64bit and the linked server I've created to Oracle 10G is using OraOLEDB.Oracle. If I test the connection in SQL Management Studio it succeeds and for any queries I have using OpenQuery to select from the Oracle DB I have no problem getting results.
The Oracle 32bit client and 64bit client versions are installed on the machine.
My problem is that I need to exec an Oracle SP which in turn inserts into various Oracle tables. I previously had this all working fine on 32bit SQL Server 2000 installation connected to Oracle 10G. Using the same code in SQL Server 2008 I get the following error:
Msg 7357, Level 16, State 2, Line 1
Cannot process the object "{CALL INTF.INTF_TW_PO_REQ_INTERFACE.MAIN(NULL, 15.000000, 0.000000, 'BLPO0099998', 'BLPO0099998', '', '', 39804, 21883, 'BLPO0099998', 249, 1, 950, 'Main', 190506, 37336, '1', TO_DATE( '20090706','YYYYMMDD' ), TO_DATE( '20090706','YYYYMMDD' ), 'INCOMPLETE',37336, {RESULTSET 1, P_Success})}". The OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE" indicates that either the object has no columns or the current user does not have permissions on that object
The call is made by the following piece of code in SQL:
SET @execCmd = N'SELECT
P_Success
FROM
OPENQUERY( ORACLE, '''+ @oracleCmd + ''')';
EXECUTE (@execCmd);
Where @oracleCmd = {CALL INTF.INTF_TW_PO_REQ_INTERFACE.MAIN(NULL, 15.000000, 0.000000, ''BLPO0099998'', ''BLPO0099998'', '''', '''', 39804, 21883, ''BLPO0099998'', 249, 1, 950, ''Main'', 190506, 37336, ''1'', TO_DATE( ''20090706'',''YYYYMMDD'' ), TO_DATE( ''20090706'',''YYYYMMDD'' ), ''INCOMPLETE'',37336, {RESULTSET 1, P_Success})}
I also tried using the below snippet from another post I found and got no joy either.
declare @result varchar(255)
exec ('BEGIN
?:= your_SP_Name(''arg1'', ''arg2'', etc);
END;
',@result OUTPUT) at your_LinkedServerName;
select @result;
OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE" returned message "ORA-06550: line 3, column 7:
PLS-00222: no function with name 'INTF_TW_PO_REQ_INTERFACE' exists in this scope
ORA-06550: line 3, column 1:
PL/SQL: Statement ignored".
I can't figure out why it doesn't work in SQL 2008 when it worked fine in SQL 2000 - PLEASE HELP!
Thank you
Alida Hope

Why development on 10g and production on 8i? Either both should be 8i or both should be 10g.
If you will keep production on 8i and development on 10g then you cannot stop such errors as there are features that are enabled by default in 10g and both the versions have very big differences.
Just go ahead and install 8i.

Installing SAP R/3 4.7 SR1 EXT200 on Linux 5.2 with Oracle 10G (10.2.0.2)

I am getting following error which executing the DB Load. I am done with CI installation and Installed Oracle 10g with patch level 10.2.0.2( according to PAM)
I got following error in sapinst.log file:
INFO 2009-08-31 17:12:48
Working directory changed to /home/rq1adm/sapinstall_DB.
INFO 2009-08-31 17:14:08
Task files created
INFO 2009-08-31 17:14:08
Command files created
ERROR 2009-08-31 17:14:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPDOKCL.log
ERROR 2009-08-31 17:17:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPSSEXC.log
ERROR 2009-08-31 17:20:09
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPAPPL2.log
ERROR 2009-08-31 17:25:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPAPPL0.log
ERROR 2009-08-31 17:31:09
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPAPPL1.log
ERROR 2009-08-31 17:32:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPSDIC.log
ERROR 2009-08-31 17:33:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPDD03L.log
SAPDOKCL.log:
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(TSK) ERROR: Unable to rename /home/rq1adm/sapinstall_DB/SAPDOKCL.TSK to /home/rq1adm/sapinstall_DB/SAPDOKCL.TSK.bck
(TSK) ERROR: OS error message: No such file or directory
/sapmnt/RQ1/exe/R3load: job finished with 1 error(s)
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171410
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: DOKCLU created #20090831171410
(IMP) INFO: import of DOKCLU completed (1262437 rows) #20090831171545
(DB) INFO: DOKCLU~0 created #20090831171548
(DB) INFO: disconnected from DB
/sapmnt/RQ1/exe/R3load: job completed
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171548
SAPSSEXC.log:
/sapmnt/RQ1/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#7 $ SAP
/sapmnt/RQ1/exe/R3load: version R6.40/V1.4
/sapmnt/RQ1/exe/R3load -dbcodepage 1100 -i /home/rq1adm/sapinstall_DB/SAPSSEXC.cmd -l /home/rq1adm/sapinstall_DB/SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(TSK) ERROR: file /home/rq1adm/sapinstall_DB/SAPSSEXC.TSK.bck already seems to exist
             a previous run may not have been finished cleanly
             file /home/rq1adm/sapinstall_DB/SAPSSEXC.TSK possibly corrupted
/sapmnt/RQ1/exe/R3load: job finished with 1 error(s)
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171710
SAPAPPL2.log:
/sapmnt/RQ1/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#7 $ SAP
/sapmnt/RQ1/exe/R3load: version R6.40/V1.4
/sapmnt/RQ1/exe/R3load -dbcodepage 1100 -i /home/rq1adm/sapinstall_DB/SAPAPPL2.cmd -l /home/rq1adm/sapinstall_DB/SAPAPPL2.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: IACKEYCOLD~001 created #20090831171940
(DB) INFO: IACKEYCONV created #20090831171940
(IMP) INFO: import of IACKEYCONV completed (0 rows) #20090831171940
(DB) INFO: IACKEYCONV~0 created #20090831171940
(DB) INFO: IACKEYCONV~001 created #20090831171940
(DB) INFO: IACMIME created #20090831171940
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(TSK) ERROR: file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK.bck already seems to exist
             a previous run may not have been finished cleanly
             file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK possibly corrupted
/sapmnt/RQ1/exe/R3load: job finished with 1 error(s)
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171940
WE have OCFS2 as a file system( on shared disk location)/sapmnt/RQ1/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#7 $ SAP
/sapmnt/RQ1/exe/R3load: version R6.40/V1.4
/sapmnt/RQ1/exe/R3load -dbcodepage 1100 -i /home/rq1adm/sapinstall_DB/SAPAPPL2.cmd -l /home/rq1adm/sapinstall_DB/SAPAPPL2.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: IACKEYCOLD~001 created #20090831171940
(DB) INFO: IACKEYCONV created #20090831171940
(IMP) INFO: import of IACKEYCONV completed (0 rows) #20090831171940
(DB) INFO: IACKEYCONV~0 created #20090831171940
(DB) INFO: IACKEYCONV~001 created #20090831171940
(DB) INFO: IACMIME created #20090831171940
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(TSK) ERROR: file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK.bck already seems to exist
             a previous run may not have been finished cleanly
             file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK possibly corrupted
/sapmnt/RQ1/exe/R3load: job finished with 1 error(s)
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171940
WE have OCFS2 as a filesystem ( on shared location)
Thank you,
Raj.

Hello Rajesh,
The log clearly says,
ERROR: file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK.bck already seems to exist a previous run may not have been finished cleanly. file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK possibly corrupted
below existing thread will help you.
Re: DataBase Instance cannot create task file during the installation
SAP Note 455195
Regards,
Debasis.

How to Install oracle 10g in a gues OS?

Hello All,
I have installed Oracle Linus 5 using the template.
Since Oracle Linux Template does not have the X server, how would one install Oracle 10g using GUI.
Should i go for the 'un attended' installation ?
Also, can i use the same 10201_database_linux32.zip bundle that i use for RH4 ?
But the inside oraparam.ini, it does not 've any details about the oracle linux( only Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2)
TIA,
JJ

I would recommend downloading the Oracle 10g template for Oracle VM from eDelivery. This automatically installs and configures Oracle 10g for you. This is a much simpler configuration path, as the OS and Oracle are pre-configured to work under Oracle VM. There are plenty of [Oracle VM Templates|http://www.oracle.com/technology/products/vm/templates.html] to chose from!
Otherwise, I would recommend downloading and installing Oracle 10g 10.2.0.4 which includes support for installing on Oracle Enterprise Linux. You can install 10.2.0.1, but you would need to tweak some files first to fool the installer into thinking you're running on Red Hat Enterprise Linux.

Oracle 10g cd's

please i want oracle 10g cd's
if you can tell me send me to
[email protected]

Got these informations in OCP Oracle database 10g new features for administrators study guide :
"In addition to the new installation features, the Oracle 10g installer includes many performance and management enhancements over 9i. Oracle 10g groups the products into separate CDs so that you need to use only one CD at a time. The following are some of the CDs that ship with
Oracle 10g; all these are included in one DVD:
Oracle Database 10g
Oracle Database 10g Companion CD
Oracle Database 10g Client
Oracle Cluster Ready Services
Oracle Database Documentation Library
The installation completes in about 20 minutes and requires only one CD. The EM Webstage and Apache, which were installed with Oracle 9i, are no longer installed with the Oracle 10g database.
Oracle 10g has a simplified software install and database creation; the disk requirement for software is now less."

Oracle 9i and Oracle 10g CD's

Oracle 9i is 3 CD's.
Oracle 10g is only one CD.
Why is this difference?

Got these informations in OCP Oracle database 10g new features for administrators study guide :
"In addition to the new installation features, the Oracle 10g installer includes many performance and management enhancements over 9i. Oracle 10g groups the products into separate CDs so that you need to use only one CD at a time. The following are some of the CDs that ship with
Oracle 10g; all these are included in one DVD:
Oracle Database 10g
Oracle Database 10g Companion CD
Oracle Database 10g Client
Oracle Cluster Ready Services
Oracle Database Documentation Library
The installation completes in about 20 minutes and requires only one CD. The EM Webstage and Apache, which were installed with Oracle 9i, are no longer installed with the Oracle 10g database.
Oracle 10g has a simplified software install and database creation; the disk requirement for software is now less."

Installation troubles on Oracle 10g

Similar Messages

Maybe you are looking for