Installed nvidia, how should xorg look?

I just installed the nvidia driver for a 7600gts. Then I ran nvidia-xconfig. I can log into X, although it is slow. I am new to this and was wondering if the "Device" section needed anything added to it, such as agp, and things like that, that could increase performance. If so would someone mind telling me what I need in the "Device" section and if I need anything how I add it? Thanks, .
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # 
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # 
#Option "FPScale" # [<bool>]
#Option "FPTweak" # 
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G73 [GeForce 7600 GS]"
EndSection

I have found this page but do not know which commands to use and how to use them. But I think it is a big start.
http://us.download.nvidia.com/XFree86/L … dix-b.html
This keeps showing up, for instance when I run glxgears:
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Sometimes many lines of it.
Last edited by Preston C. (2009-04-03 05:33:13)

Similar Messages

HT204380 I have bought a new iPad mini. its not showing me Facetime Installed. How should I start a Facetime ?

I have bought a new iPad mini. its not showing me Facetime Installed. How should I start a Facetime ?

Where did you buy it? facetime is barred from devices sold in some countries, due to the countries insisting upon it. UAE and other middle eastern countries are examples.
If you bought your iPad in a country that banns its use then you'll never have facetime on that device. It's locked out at the most basic level.

How should schema look like for

hello,
we get the following xml-file:
<?xml version="1.0" encoding="ISO-8859-1"?>
<TELEFONBUCH xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://www.oracle.com/xdb/tel.xsd">
<GRUPPE>
<ID>A134535</ID>
<NAME>Feuerwehr Frankfurt</NAME>
<GRUPPE>
<ID>A298478</ID>
<NAME>Feuerwachen</NAME>
<EINTRAG>
<ID>A198478</ID>
<NAME>Feuerwache 1</NAME>
<RUFNUMMER>
<ID>A343478</ID>
<LEITUNGSGRUPPE>externer Ruf</LEITUNGSGRUPPE>
<NUMMER>06912345678</NUMMER>
</RUFNUMMER>
<RUFNUMMER>
<ID>A123478</ID>
<LEITUNGSGRUPPE>Direktleitung</LEITUNGSGRUPPE>
<NUMMER>1234</NUMMER>
</RUFNUMMER>
</EINTRAG>
</GRUPPE>
</GRUPPE>
</TELEFONBUCH>
Could someone give help how the schema should look like to model the multiple hierarchie of the <GRUPPE>-Element?
Please help.
Thanks in advance.
Anna

Basically it will look something like...
http://download-west.oracle.com/docs/cd/B13789_01/appdev.101/b10790/xdb06stt.htm#sthref747
You will need a type with contains an element which is of the type..

Help installing nvidia and X

Hi
new to Linux & Arch, having trouble running X, hoping someone could help!
installed Arch no prob, followed wiki instructions for installing nvidia and then Xorg. When I try to start X I get "Failed to load the NVIDIA kernel module!"
modprobe nvidia
gives an error too
here is my Xorg log and xorg.conf. Hopefully someone can spot what I've done wrong!
Xorg.0.log
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux moschops 2.6.16-ARCH #1 SMP PREEMPT Thu May 11 07:20:39 CEST 2006 i686
Build Date: 19 September 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 15 19:32:15 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2530 card 8086,2530 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2532 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 1458,2440 rev 04 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 1458,2440 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 1458,2440 rev 04 class 0c,05,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 1458,2440 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2445 card 1458,a002 rev 04 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,00f1 card 1682,2119 rev a2 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:02:0: chip 1102,0008 card 1102,1021 rev 00 class 04,01,00 hdr 00
(II) PCI: 02:03:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xebd00000 - 0xefdfffff (0x4100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xbba00000 - 0xdbafffff (0x20100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00009000 - 0x0000afff (0x2000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xefe00000 - 0xefefffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xdbb00000 - 0xdbbfffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] rev 162, Mem @ 0xee000000/24, 0xc0000000/28, 0xed000000/24, BIOS @ 0xefde0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xefeffe00 - 0xefeffeff (0x100) MX[b]
[1] -1 0 0xefefff00 - 0xefefffff (0x100) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xefde0000 - 0xefdfffff (0x20000) MX[b](B)
[4] -1 0 0xed000000 - 0xedffffff (0x1000000) MX[b](B)
[5] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[6] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[b](B)
[7] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[8] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[9] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
[10] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[12] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[13] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xefeffe00 - 0xefeffeff (0x100) MX[b]
[1] -1 0 0xefefff00 - 0xefefffff (0x100) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xefde0000 - 0xefdfffff (0x20000) MX[b](B)
[4] -1 0 0xed000000 - 0xedffffff (0x1000000) MX[b](B)
[5] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[6] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[b](B)
[7] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[8] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[9] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
[10] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[12] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[13] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefeffe00 - 0xefeffeff (0x100) MX[b]
[5] -1 0 0xefefff00 - 0xefefffff (0x100) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xefde0000 - 0xefdfffff (0x20000) MX[b](B)
[8] -1 0 0xed000000 - 0xedffffff (0x1000000) MX[b](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[10] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[14] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[15] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
[16] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[17] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[19] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[21] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions/libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.8776
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.8776
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA dlloader X Driver 1.0-8776 Mon Oct 16 21:57:32 PDT 2006
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefeffe00 - 0xefeffeff (0x100) MX[b]
[5] -1 0 0xefefff00 - 0xefefffff (0x100) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xefde0000 - 0xefdfffff (0x20000) MX[b](B)
[8] -1 0 0xed000000 - 0xedffffff (0x1000000) MX[b](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[10] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[14] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[15] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
[16] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[17] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[19] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[21] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefeffe00 - 0xefeffeff (0x100) MX[b]
[5] -1 0 0xefefff00 - 0xefefffff (0x100) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xefde0000 - 0xefdfffff (0x20000) MX[b](B)
[8] -1 0 0xed000000 - 0xedffffff (0x1000000) MX[b](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[10] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[b](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[17] -1 0 0x0000a800 - 0x0000a83f (0x40) IX[b]
[18] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
[19] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[b]
[20] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x00000540 - 0x0000054f (0x10) IX[b]
[23] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[24] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[b]
[25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "ramdac"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Oct 16 22:13:07 PDT 2006
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "record"
Load "xtrap"
#Load "dri"
Load "glx"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-96
VertRefresh 50-150
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV43 [GeForce 6600/GeForce 6600 GT]"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200_75"
EndSubSection
EndSection

cat /etc/X11/xorg.conf| grep Modes
for my xorg.conf, under Section "Screen" I have the following Modes:
Modes "1280x1024" "1024x768"
Modes "1280x1024" "1024x768"
Modes "1280x1024" "1024x768"
Modes "1280x1024" "1024x768"
Modes "1280x1024" "1024x768"
#Option "MetaModes" "1024x768, 1024x768"
Modes "1280x1024" "1024x768"
However, yours is:
Modes "1600x1200_75"
Is that valid?
And what error does modprobe give you?

Error message; cannot install update due to other Firefox versions installed. How do I checkfor other versions ?

Cannot install Firefox 7.0 update. Getting message that update cannot be completed. Check for other versions already installed. How do I look for other versions ?

Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I have installed nvidia graphics drivers on windows 7 (bootcamp) now i can't use windows, it's just a black screen, how do i resolve this?

I have installed nvidia drivers from nvidias website for my geforce gt 650m on my early 2013 macbook pro retina 15", now i can't use windows in bootcamp, whenever i go into windows it turns into a black screen before i can see my desktop. How do i resolve this?

From the home screen, double click the home button to bring up the Recently used App list. Find the App with the problem and hold your finger on it untl the Apps start to shake. When that happens tap on the (x) on the right side corner of the app to close it.
Tap the home button again to get back to the home screen, and try to open the App again.
If that doesn't work, try resetting the iPad. (there should be no data loss):
Press and Hold the Power and home buttons until the Apple Logo shows up. Ignore any sliders that may appear.
When the iPad turns back on, try opening the App again.

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears: "The licensing of the product does not work" Fault 6 How should I proceed? Have the program installed on only one computer.

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.

Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene

We purchased Adobe Photo Shop Windows with 2 licenses in December 2012. We only installed 1 instance and woould like to isntall the other now. How do we look up our Activation/license information

We purchased Adobe Photo Shop Windows with 2 licenses in December 2012. We only installed 1 instance and would like to install the other now. How do we look up our Activation/license information?

Assuming you got it directly from Adobe as a download, click on the red logo near the top-left of this page. Then click the [ Manage account ] button. After logging-in you should be able to find all the information on products you've purchased.
-Noel

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Due to virus attack i had to format my windows laptop...now when i installed new itunes software i had to sync my ipod touch again but it says that if do the same then the data on my ipod touch will be erased....how should i protect my ipod touch data?

due to the virus attack i had to format my windows laptop...now when i installed new itunes software i had to sync my ipod touch again but it says that if i do it then the data present on my ipod touch will be erased as it is syncd to some older library... how should i protect my ipod touch data?

With all you media (apps, music) in the iTunes library connect the iPod to the computer and make a backup. Do that by right clicking on the iPod under Devices in iTunes and select Back Up. Then restore the iPod from that backup.
Note the the iPod backup that iTunes makes does not included synced media like apps and music.

I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device? When will iTunes come to Ubuntu

I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?
When will iTunes come to Ubuntu?

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the about:crashes page.
*You can open the about:crashes page via the location bar, like you open a website, or open this page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

How do I look at pdf files after installing adobe reader?

how do I look at pdf files after installing adobe reader?

Start Adobe Reader
Use the menu File > Open...
Select the PDF file

How should i know that i have or already installed these in my database?

my question regarding the steps in Post Installation Actions in installing patchset Oracle 9i Data Server 9.0.1 Patch Set 4 for Sun SPARC Solaris (32 bit Database)
I'm not very sure about the instruction..
How should i know that i have or already installed these in my database?
Should i run all even if i don't know whether i use them or not?
Or should i do nothing, and continue to my next patch installation?
-Execute the following step only if you have JAVA enabled in your database:
-Execute the following steps only if you have installed the Oracle Label
Security option in the database you are attempting to modify:
-Execute the following steps only if you have JAVA enabled in your database:
-Execute the following steps only if you have installed UltraSearch in the
database you are attempting to modify:
-Execute the following steps only if you have installed Oracle Spatial or
Oracle Locator in the database you are attempting to modify:
-Execute the following steps only is you are using the RMAN catalog.:
Plz advise..
Regards,
Rushdan Md Saad.

It all depends. You don't NEED anything, Firefox runs just fine with it's default setup, and you don't need to install anything to fully experience the best of the web. But lets say you don't like ads. Install Adblock plus. Lets say you want to change themes, there are dozens of them. It's all personal preference.

I can't install Flash Builder.How should I do?

Here is error message:
Exit Code: 6 Please see specific errors below for troubleshooting.For example, ERROR: DW030 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s) ----------- Payload: Adobe Flash Builder 4.7 4.7.0.0 {EB510B48-ACF6-43A0-8214-3DA0D6D0936F} ----------- ERROR: DW030: Custom Action for payload Adobe Flash Builder 4.7 4.7.0.0 {EB510B48-ACF6-43A0-8214-3DA0D6D0936F} returned error. Failing this payload. -------------------------------------------------------------------------------------
I want to learn Flash builder, but i cant install it . How should i do ?

Hi,
Please follow these articles. They may help you with the issue :
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
http://forums.adobe.com/thread/855312

How should my VIs look?

I'm relatively new to LabVIEW and as I'm building bigger and bigger VIs with multiple subVIs, etc. I've been wondering what makes a good "looking" program. Basically... how should I organize it so that it's readable and makes sense to another person.
Is there any where I can find some good examples of this with some more complicated programs? I did a quick search and didn't find anything, but please let me know if you know of anything. Thanks.

At first, this looks good, your wiring is clean and easy to follow the data flow. I've some worse code in my own projects.
So let's see where/how you can reduce the overall BD size.
The timed loop has some empty space between code and checking the exit condition.
The VISA code is a good candidate for SubVIs, especially the VSET command could be a single reusable SubVI that takes a dbl. Same for the ISET
You also can make SubVIs without intending them for reuse. I think about a XNET/CAN Init.vi. Would save a lot of real estate.
Test Info Names could be a Constant.vi (so just the constant feeding an indicator). Might be reusable if you read from the TDMS at another place. I also use small VI Icons for such VI's, about half the size of a normal 32x32 icon. You need to make the 256 and the BW color Icon of a reduced size, then the outer part is made transparent.
Use clusters, e.g. max volts, min volts, volt inc, set amps could go into one cluster. You can make the borders transparent, so it doesn't look like a cluster on the FP. Helps you to make that code a SubVi as you only need a single control (the cluster). Make the cluster a type def so you only need to change the type def and not SubVI and FP.
Same place, consider using a dialog for setting up the measurement. Then all can go into a single vi (including the FP code/indicator).
I think that using SubVIs will also get down a second optical 'bug', that you have a very highly nested structure (look at the bottom right corner and see that you have 4 error catching case structures). I normally place the error catching case around my event structure. Maybe this already gets you rid of one. Also I think some of them are unnecessary, as code isn't executed with an error on the wire (e.g. the TDMS and VISA vi's won't do anything when called with an error).
As an alternative, use a state machine that basically just goes Init CAN -> Init Visa device -> Run -> Shutdown with branches to an error handling state or to the shutdown state (e.g. if cancelled by the user).
Other points to change:
The run button is outside the coresponding event frame. Place it inside the event frame to get the latching working.
Error handling. The outer while loop has no shift registers on the error wire and no abort if an error occures, so you will drop errors without noticing.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Installed nvidia, how should xorg look?

Similar Messages

Maybe you are looking for