Installed SAP Master and can no longer log into old xIEP portal

Hello there,
I am very new to SAP so please bear with me. We were experiencing J2EE Engine connection errors along with no connection to our SLD with our xIEP portal, so I tried to verify that all of our parameters were correct. I did this by checking prior documentation and opened up the SAP Master Installation and began to verify the settings for the current installation of NetWeaver 2004s that we have.
However at the end of the installation, I clicked on start and it began to install SAP Master. Now when we log into our xIEP portal, we can no longer log in with our user id and password, but are able to log in as Administrator.
I am afraid that when I installed the SAP Master, this might have replaced the old NetWeaver that our portal was running off of. Please tell me that this isn't true, and that somehow I can get access to our old portal. Any suggestions would be greatly appreciated. Thank you.

You might consider rebuilding the ECP virtual directory:
http://technet.microsoft.com/en-us/library/ff629372.aspx
With the EMS, procedure should be the same for Exchange 2010 and 2013.
Since you state that everything else is working, other virtual directories included (OWA for ex.), it's most likely something with the ECP virtual directory.
But even before that, I would try to look at the (rather cryptic) IIS logs and see if you cannot find any useful information there:
http://social.technet.microsoft.com/Forums/exchange/en-US/935eeb5b-d996-4933-9cbd-0347ebad801d/how-can-i-view-exchange-iis-logs?forum=exchange2010
There were some ideas in this thread but i think you may have seen it already?
http://social.technet.microsoft.com/Forums/exchange/en-US/1736b5ab-e69b-4637-aa59-f2d9bd54ead2/unable-to-access-exchange-2013-eacecp-webpage?forum=exchangesvrdeploy
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Similar Messages

I recently installed itunes update and can no longer connect to network nor internet

I recently (sept 2013) installed itunes update and can no longer connect to a network nor internet wired /wireless. I know it is not the gateway as other devices work. Please help. I am not very knowledgable so exact instructions will be most helpful.

Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
Good luck!

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

After recent OS update (10.8.2) I can no longer log into icloud.

After recent OS update (10.8.2) I can no longer log into icloud. I've reset password, but when I try to login on the icloud preferences panel it gives a little "bonk" sound and then spins forever. Open to suggestion. Thanks!

Signing out and signing back in seemed to do the trick as suggested here: https://discussions.apple.com/message/19827058#19827058

I am trying to backup my iPhone but the email used for my Apple ID has been deactivated so I can no longer log into my account or back up my iPhone. How do I back it up otherwise? Or how do I change my email?

I am trying to backup my iPhone but the email used for my Apple ID has been deactivated so I can no longer log into my account or back up my iPhone. How do I back it up otherwise? Or how do I change my email?

You can update your AppleID info here: Manage your Apple ID
Also check this page for more details about iTunes: Apple - Support - iTunes

Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?

My screen sharing functionality did not show up in the dock with an updated icon. It had a question mark- shows my connections but nothing works, I did make sure screen sharing is on and also connected to VPN. Once I tried to launch screen sharing nothing happens. Such an elegant solution in Mavericks not does not work. Ugh. Help!

This is the post that got me set up- I too am running an older version at work vs. Yosemite. As soon as I followed is advice everything worked.
Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?
I believe the location of the "Screen Sharing" app has changed, which explains why if you had it in the dock it has been replaced by a ?
Don't forget you can launch screen sharing (once your VPN connection is up) by typing in the Safari destination slot vnc://remotemachinename:portnumber (omit the :port number if you are using the default VNC port, 5900). This should launch Screen Sharing and put its icon in the dock. You can drag the Screen Sharing icon to the left of your dock and it will hopefully remain there after you exit Screen Sharing, or you can right-click on the icon when it's running and select Options->Show in Finder to find out its new location and drag its icon to the permanent entries in your dock.
Hope this helps; worked for me.

After installing FireFox 17 I can no longer log on to the video web site VUDU I tried the reset and it didn't worrk now what do I do?

I was using Firefox 15 but kept getting messages to update to Firefox 17 so I did and now I cannot log into my account at VUDU.com. Which by the way is the only web site I have this problem with. It never happened with ver. 15 and only started to deny access in the past week. So why is the question of the day. What did you guys screw up with ver 17?

Using hardware acceleration means that Firefox uses the GPU instead of the CPU to do some (image) manipulations and you may not notice any effect in Firefox if you disable hardware acceleration.<br />
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

I can no longer log into either of my banks on line. I have Safari 6.0.3

I can no longer log onto either of my banks. I have Safari Version 6.0.3(7536.28.10). I just did an update. On the apple bar there is https and a paddle lock. clicking on that it says I'm using an encrypted connection. I can't get past this. Help?

" On the apple bar there is https and a paddle lock."
That's standard. Has nothing to do with your issue. What happens when you try to log into a bank web site? What is the response?

LCM causes Essbase security to be overwritten and can no longer log in.

When using LCM and migrating Foundation / Shared Services and loading it back in from the file.
It somehow overwrote something with Essbase security so no user (including the admin) can log in. Through EAS or through Workspace / Planning
Any suggestions how to reset this? Is it that Essbase is no longer connected to Shared services somehow. This is clearly a bug as there is no way that this should be possible. But hoping someone has seen this before and has a work around.

if you can. Log into the system as the master Essbase admin through EAS and refresh the shared services security.
Alternatively you may need to kill the essbase.sec file and cause it to reset the master Essbase user. This should be done with care though as you can cause the environment to become corrupt if all the steps aren't done properly

I can no longer log into my online banking website and have tried all of the suggested Firefox fixes apart from resetting Firefox, any other suggestions?

When I try to enter my customer number to log into my online banking website, an error message reads:
This form has been re-submitted. Re-enter your customer number and submit only once.
When I called the bank to find out if they could help they said it was a browser issue and suggested I should use IE or Chrome (No thanks!).
I have gone through all of the Firefox suggested troubleshooting fixes including deleting the cookie files. I have not yet tried resetting Firefox as I was hoping for a simpler solution before taking this step.
Thanks for any help you may be able to offer.

If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Can no longer log into ECP on Exchange 2013

I am no longer able to log into my Exchange 2013 SP1 ECP site. Here are a few items to consider:
Installed replacement UC on 5/7/14. Configured services POP, IMAP, SMTP, IIS. Removed IIS from existing UC which still had 6 days of life. Both certs identical. I did no further changes for this new cert other than install it through ECP.
"Old" cert died 5/13/14 @ 8a. New cert took over without any problems.
Continued to use ECP through close of business 5/14/14. Late on 5/14/14 I attempted to log into ECP remotely thru a VPN to migrate users from our Exch 2007 server. Could not access ECP.
When I attempt to access ECP, I enter <domain>\<username> and password. When I hit "enter" or "sign in", the page flashes and the password field is empty.
I am still able to log into OWA
I cannot log into ECP using the server name, localhost or cert name.
Currently using default settings of FBA and Basic authentication
UC is correctly bound to both front and backend of IIS (443, 444)
Everything else is working correctly for the Exchange site. I have been continuing my migrations through Powershell. I just can't log into ECP.
I created a new Exchange Admin user only to find I still could not log into ECP.
Short Version: I was able to login and then, after a four hour stretch, I was not able to login. No errors on the web page or Event logs. Exchange is routing mail correctly.
I have scoured the web for that past couple of days looking for a solution but the issues I find are throwing up a web page with an error of some sort. Since I'm not experiencing that issue, I'm a bit stumped. I'm no expert, but I'm not a novice.
Since 2013 is a new rebuild, I thought it best to ask for a little assistance. Any advice/assistance would be appreciated.

You might consider rebuilding the ECP virtual directory:
http://technet.microsoft.com/en-us/library/ff629372.aspx
With the EMS, procedure should be the same for Exchange 2010 and 2013.
Since you state that everything else is working, other virtual directories included (OWA for ex.), it's most likely something with the ECP virtual directory.
But even before that, I would try to look at the (rather cryptic) IIS logs and see if you cannot find any useful information there:
http://social.technet.microsoft.com/Forums/exchange/en-US/935eeb5b-d996-4933-9cbd-0347ebad801d/how-can-i-view-exchange-iis-logs?forum=exchange2010
There were some ideas in this thread but i think you may have seen it already?
http://social.technet.microsoft.com/Forums/exchange/en-US/1736b5ab-e69b-4637-aa59-f2d9bd54ead2/unable-to-access-exchange-2013-eacecp-webpage?forum=exchangesvrdeploy
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Since my apple tv (gen2) update yesterday i can no longer log into itunes store on any account at all??

Updated my apple tv last nite, it did two updates and now im told it is upto date, i cannot log into itunes store, says it is unvliable, but my computer and iphones can acces it fine. any one else having this issue? also a problem ive been having since i got it is that home sharing wont work with my itunes or my iphone 4. but when i power off and on my wifi router it starts working, every time i want to use it this happens?

I assume from your first post that you will have tried restarting your router. if you were having to restart it all the time previously have you considered an interference problem.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

I was told to restore my ipod to fix previous problems, but i can no longer log into iMessage. What are my options?

I recently contacted Apple, and was told restoring my ipod would fix it unexpectidly turning off and restarting, so i resotred if, and no longer can log into iMessage.

See:
iOS: Troubleshooting FaceTime and iMessage activation

Can no longer log into school network internet?

Hi I take my MacBook Pro to work with me it is running 10.7.4. Normally I can plug into an Ethernet connection at work open safari and enter my user name and password like I would if i was logging into one of the school PC's. This then clears with Smoothwall and allows me to access the web. However this morning it just kept reloading the page telling me that log in failed. Is this to be more likely something on the server end or my macbook? I have been into network settings and the Ethernet is all connected and in diagnostics it says that everything appears to be running fine I just cant log in.

Open Keychain Access - in Utilities
Highlight the school login
Delete
Try to log in again
It should ask for your password

I can no longer log in to Azure Portal (or Support)

Hi. For the past few days I have not been able to log in to the Azure Portal (or Azure Support). I have tried on separate machines and it fails on them all. I can log into other Microsoft properties, like Bing and Outlook.com with the same MSA.
This is the error I receive:
https://login.windows.net/common/wsfederation?f=255&MSPPError=-2147217320
Sign In
Sorry, but we’re having trouble signing you in.
We received a bad request.
Additional technical information:
Correlation ID: adf15a25-4f0f-41c3-bd05-d7da01ff8fa6
Timestamp: 2014-08-07 15:12:34Z
AADSTS20012: An error occurred when we tried to process a WS-Federation message. The message was invalid.
Best regards,
Jerry ([email protected])
Jerry Nixon

Hi,
Based on your description, there may be some issue with your azure account, please try to contact with azure support, it's a best choice, Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/ Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a
support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Best Regards
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Installed SAP Master and can no longer log into old xIEP portal

Similar Messages

Maybe you are looking for