Installer update method changes every time i update an adobe product!

hello, it is REALY anoying, that the user have to set/chose the update method e.g. "Notify me to install updates" EVERY TIME you update adobe products!!! Because Adobe Installer resets these settings every time, they offer a new product update (adobe flash or adobe reader e.g.).
I dont wont to "Allow Adobe to install updates"!!! I only want to be notified about new updates! So I have to read every time the options again to choose the right option.
Another alternative would be to me, not to install product updates, but I think this is not what adobe wants the user should chose.
Best Regards,
Tom

What version of iWeb are you suing and what version of OS X?
You can try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

Similar Messages

Desktop pic changes every time I restart the MAC since the new OIS update

Anybody can help with?

ewaller, thank you for your response and interest! at this moment i'm so happy seeing the correct hour on the screen that all that i want is enyoi it!!!
I live in Barcelona so, teorically my UTC is UTC + 2. During all this time with UTC the time has been changing every time i started the computer but without following a pattern. So one day the time was 30 min. ahead the real time, another day 2 hours before and so on... a bit crazy!
I have Windows installed on another partition, but I rarely started it.
ewaller wrote:
verduler wrote:This is the output of hwclock --debug. It's a translation because my locale isn't english
FYI. You can prepend LC_ALL=C to a command to force English output. Example:
LC_ALL=C hwclock --debug
Could have saved you some translating
If you are happy with the clock set to localtime, great. I prefer having it set to UTC for a variety of reasons that have been discussed on these forums that I'll not repeat here.
The hardware clock is UTC
Your system assumed the clock was set to UTC
Time read from Hardware Clock: 04.22.2012 10:38:11
Hardware Time: 22/04/2012 10:38:11 = 1335091091 seconds after 1969
Sun April 22 2012 12:38:11 CEST -0.381791 seconds
The system shows your time as being two hours ahead of UTC. UTC does not have summer/winter time adjustments. I assume that you are one hour ahead of UTC, plus an extra hour of adjustment for summer.
The post I took this from was posted at 01:01:56 PDT (UTC-7). What time (your local time) did you make that post?
If it took you 20 minutes for the translation your hardware clock at the time would have been about 11:01. That is 10 hours ahead of me.
I am confused, because I expected it to be about 9. If things are working right, it should be 7.
Anyway, it would appear if the change you made fixed things then your hardware clock was not set to UTC. If you want to pursue this, I am glad to help. If not, I am sure we will be talking about clock settings this fall

How do I make a web page that changes every time the user refreshes it? Is it possible in Muse?

Hi, i'd like to make quite a simple website where the main text in the centre of the page changes every time the user refreshes the page in their browser. I assume i'll have to make one master, and multiple pages that are all the same except for the changes in the text, but i'm not sure how to make it so that every refresh directs to a different page and not just the home page? Is this even possible in Muse?
This is an example of what i'm going for: :: procatinator ::
Thanks!

You can't do it with Muse alone. Would probably be fairly simple to do with a bit of Javascript. Check the widget directory as it is possible someone has made a widget for random content. If not, maybe I will make one this weekend. ;-)

Resource_manager_plan and Reserved pool size parameter changing every time

Hello All,
In my production database (Oracle 11g RAC )Resource_manager_plan and Reserved pool size parameter changing every time .
Below is my question .
This parameter changed automatically or it require manual intervention .
In what case this parameter changed if it automatically changed.
I had checked dba_hist_parameter a, dba_Hist_snapshot b table for parameter changed history parameter changed .
This parameter linked with process and sql performances?.
Please help me . Thanks .
Regards
Ranjeet

When scheduler window opens, its resource plan becomes active. For example, MONDAY_WINDOW begins on monday at 22:00. At this time current plan is changed to DEFAULT_MAINTENANCE_PLAN. At 00:00 (Tuesday) plan that was active before monday 22:00, becomes active. DEFAULT_MAINTENANCE_PLAN is used for Autotask clients :
select client_name,WINDOW_GROUP from DBA_AUTOTASK_CLIENT ;
CLIENT_NAME                     WINDOW_GROUP
auto optimizer stats collection ORA$AT_WGRP_OS
auto space advisor              ORA$AT_WGRP_SA
sql tuning advisor              ORA$AT_WGRP_SQ
select * from DBA_SCHEDULER_WINGROUP_MEMBERS where WINDOW_GROUP_NAME in (select WINDOW_GROUP from DBA_AUTOTASK_CLIENT);
WINDOW_GROUP_NAME WINDOW_NAME
ORA$AT_WGRP_OS    MONDAY_WINDOW
ORA$AT_WGRP_OS    TUESDAY_WINDOW
ORA$AT_WGRP_OS    WEDNESDAY_WINDOW
ORA$AT_WGRP_OS    THURSDAY_WINDOW
ORA$AT_WGRP_OS    FRIDAY_WINDOW
ORA$AT_WGRP_OS    SATURDAY_WINDOW
ORA$AT_WGRP_OS    SUNDAY_WINDOW
ORA$AT_WGRP_SA    MONDAY_WINDOW
ORA$AT_WGRP_SA    TUESDAY_WINDOW
ORA$AT_WGRP_SA    WEDNESDAY_WINDOW
ORA$AT_WGRP_SA    THURSDAY_WINDOW
ORA$AT_WGRP_SA    FRIDAY_WINDOW
ORA$AT_WGRP_SA    SATURDAY_WINDOW
ORA$AT_WGRP_SA    SUNDAY_WINDOW
ORA$AT_WGRP_SQ    MONDAY_WINDOW
ORA$AT_WGRP_SQ    TUESDAY_WINDOW
ORA$AT_WGRP_SQ    WEDNESDAY_WINDOW
ORA$AT_WGRP_SQ    THURSDAY_WINDOW
ORA$AT_WGRP_SQ    FRIDAY_WINDOW
ORA$AT_WGRP_SQ    SATURDAY_WINDOW
ORA$AT_WGRP_SQ    SUNDAY_WINDOW

How can you make an image change every time you refresh a page?

Hi.
I've recently redone my website and was wondering how I could make the image on my main page change every time you refresh the page?
Like is there a certain script you can use?
Here's my website
www.liamfawcett.com
Thanks

Copy & Paste the following JavaScript code between the <head> and </head> tags in your HTML document, in Code View of course.
<script type="text/javascript">

</script>
In the array, change URLs (http://www.example.com) to your own links. Change images (some_image.gif) to your own images.
Save page. Preview in browser. Hit refresh (F5 or Ctrl+R) to see the images change.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

I am trying to download a movie in iTunes and I was asked two security questions. They are different form the questions I chose and whenever I exit and try again, I see that the questions change every time. How can I reset the questions?

I am trying to download a movie in iTunes and I was asked two security questions. They are different form the questions I chose and whenever I exit and try again, I see that the questions change every time. How can I reset the questions?

From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

HT1918 why does my app credit card billing information change every time I have an update on my phone? then it won't let me correct it

Ok when I install an app, even a free one, it always asks for my log in then takes me to the app. Never have problems with this unless my phone has an update, as soon as I install an update, my billing information get's messed up so it won't allow me to download or update apps. I've gone in to correct the billing information, which was only the security code from the back of my card, and it will not accept the changes. How do I fix this?

Amylovelyy wrote:
Every time I try to download an app it says billing info is incorrect but its all correct ...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Amylovelyy wrote:
... it won't let me sign in using a diff apple id ...
Settings > iTunes and App store > Apple ID = Sign Out... Then Sign In using the preferred Apple ID.
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.

Installation fails at 12% every time

I have had Windows 8 on my laptop for the longest time, and after trying to install Windows 10 it fails every time at 12% with a "Windows cannot install the file" error. I have done these things in attempt to fix it, I've updated my BIOS, wrote
zeros to my hard drive in attempt to clear the MBR. I am running an Inspiron 1564 (yes, the old one from 2010), but it should run 10 fine if it runs 8.1.

I don't have this machine but here are a few things you could look at; that is if you haven't already.
Things you could try:
Changing up the Bios Settings.
if it came with win 8. it is probably runs a uefi firmware. These often have a bios backwards compatibility mode. You could try checking those options and turn off secure boot and turn on the bios backwards compatibility mode and see if win 10 will install.
if it came with win 7, it may have a bios with those features not turned on; if that's the case try turning them on.
Note: you may lose/gain security features or boot speed by disabling or changing some of these features. But it may tell you if a uefi firmware or bios settings incompatibility that could be causing your installation issue. You could also try a different
HDD.
Also you didn't mention whether you were trying to install from a usb stick or if you burned the iso to a DVD. If you are trying from a USB and have a DVD drive. Try burning as a DVD. I had dell lattitude that would never install from my usb; it would start
installing but then it would stall, but from a dvd in the dvd drive it installed alright... kind of weird (I was installing win 7 not 10, so not sure whether it would make a difference on win 10.)
Win 10 may also run but the install is borking on your machine... this is unconventional and surely not recommended, but you could put that laptop hard drive in another machine and run the install. Then on the last reboot swap the hard drive back into your
laptop and see if it boots up.
This may allow you to try running the os and see how it works on that laptop, if that's your goal.

Why does my location change every time I start/restart my computer?

I have yahoo weather set to my location. Every time I switch to an other account or start /restart my computer it changes to another location. I follow the "Firefox cure" Yahoo gives for the problem but it continues to do the same . This started about a week ago when I updated Firefox.
The problem is about to drive me nuts.
HELP !!

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''

Time/date on my iPhone changes every time I sync with iTunes - any fix?

Hi All,
Every time I sync my phone with my computer, the time and date on my phone changes - it goes to one week behind, and about 10 hours earlier than it actually is. My computer calendar has the right time (NYC time zone), the calendar support settings on my iPhone are set to NYC time zone - what could be happening? Any ideas?
Thanks,
Maria

msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P.

Screen resolution changes every time I open I-Tunes

The screen resolution changes when I open I-Tunes. I have to go into control panel every-time to adjust the resolution to make the print and screen layout small enough so its entirety is captured which then allows me to use I-Tunes. Otherwise the graphics are too large to be captured on the screen making the program unusable.

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Why does the port settings on my iPad change every time I sync with my computer. After syncing I have to go in and change the port settings so I can send and receive emails on my iPad.

Every time iSync my iPad 2 with my computer it changes the port settings. Has anyone else had this issue?

When you sync the iPad, do you have mail settings configured to sync to the iPad? You could have different settings on your computer that might be affecting the email set up on the iPad when you sync.

Why is Password being forcefully changed, every time i buy anything on app store or itunes? happened at least 6 times in the last 2 months.

i have a apple phone and a ipad Air, eveytime i buy anything on itunes or even something free or not free on the app store, i am forced to changed my password, as it says my old password does not work no more. if there is anything i should know of what is going it would be great.

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

InDesign CC installation freezes at 43% every time

I have been trying to install InDesign CC for hours. Every time it gets to 43% and freezes. I have tried several times with the same results. Please help.

This is an typical installation error.
You may need to uninstall and reinstall Illsutrator CC after performing below steps. If you are okay . try with the below step.
Navigate to C:> Program Files(X86) > Common Files > Adobe.
Open Adobe folder and locate folder named Caps.
Rename Caps folder to Caps-old.
Then try to install InDesign cc application.

Using laptop in many envirouments (home, office, university..) made change every time the proxy server. May Firefox (in the future..) have same facilitation to learn or try itself to set the correct proxy against the networks?

In may network envirounments there is a proxy server. I mean, at the office there is one, at the University another one, at home none...
Every time I get a new place of this I have to change manually the proxy configuration. I think this is not so confortable. I discovered a Antivirus SW that has implemented that idea: First the sw try with the proxy settings, if it's failed it try without. It's not the best, but at own home this make sense. May firefox use more intelligent (may be autolearn: I mean by network id firefox can associate the proxy settings) proxy configuration settings.
Thx a lot!
FaB

You can look at these extensions:
*FoxyProxy: https://addons.mozilla.org/firefox/addon/2464
*QuickProxy: https://addons.mozilla.org/firefox/addon/1557
*SwitchProxy: https://addons.mozilla.org/firefox/addon/125

Installer update method changes every time i update an adobe product!

Similar Messages

Maybe you are looking for