Installing a new hard drive and reinstalling Leopard 10.5 on a ibook g4

I have run out of hard drive space on my 30 GB ibook g4. I installed Leopard 10.5 about 8 months ago and hope to use Time Machine to restore the system. I also have made hard backups of my documents, photos, videos, address book etc. My question is do I need anything else besides my Leopard 10.5 install DVD to format the new hard drive and install the leopard 10.5 OS x operating system? I do not have a clone boot disc or firewire boot discs. Thanks for your advice.

Another alternative is to put a Seagate or Hitachi bare HD into a FireWire enclosure—basically, rolling your own (for a significant savings). Here's one http://www.amazon.com/Macally-Firewire-Storage-Enclosure-PHR-250CC/dp/B0000B3ALD
I have two Argosy enclosures with 200 GB Hitachi HDs. They used to be available at http://www.pcmicrostore.com/PartDetail.aspx?q=p:10500933 but apparently they ceased carrying them. However, a google search for ARGOSY EXTERNAL 3.5" firewir yields http://www.pcmicrostore.com/PartDetail.aspx?q=p:10502056%3Bc:100187%3Br:google which isn't a bad price.

Similar Messages

  • I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

    I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

    Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
    1. Revert back to Snow Leopard.
    2. Purchase FCP X... 
    if you can't stand FCP X
    3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
    I just got FCS 3 today through apple phone sales..

  • New Hard Drive and Snow Leopard Upgrade

    I'm getting ready to install a larger hard drive in my MacBook Pro. I am also going to install Snow Leopard. I assume that I just boot from the Snow Leopard disk after I install the new hard drive and it will walk me through the installation. Sorry if this is a dumb question. I'm new to Mac.
    Also, I have copied my files to an external hard drive. However, will I be able to access my old hard drive if I put it in an enclosure. This will give me access in case I missed something.
    Thanks in advance for your help and advice.
    Dave

    I am doing the same thing... an Apple Authorized Repair facility installed my new drive yesterday. They were supposed to create 2 partitions for me, but failed to do so. Instead, they just cloned my old hard drive over to the new one. This really *****, because Spotlight and System Profiler say that my disk capacity is only 200GB and available disk space 40GB (same as original drive).
    What do I need to do to create 2 partitions, one with FAT32 that is 25GB (for both Windows and Chrome OS/Ubuntu) and the other 615GB partition for OS X 10.6?
    The important caveat is that my Samsung Superdrive is dysfunctional, as discussed in this long thread.
    When I now try to use Disk Utility to Partition the drive, I get the error:
    "PARTION FAILED Partition failed with the error: Could not modify partition map because filesystem verification failed"
    And when I try to use Bootcamp Assistant to partition the drive, I get this error:
    "THE DISK CANNOT BE PARTITIONED BECAUSE SOME FILES CANNOT BE MOVED. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
    Does this mean that Apple Computer has totally screwed me over? First they gave me a faulty Super drive, and then they install a hard drive without properly formatting the partition? What should I do now?

  • I recently installed a new hard drive and don't know how to install the software.

    I recently installed a new hard drive and now when I turn it on, it just shows a blinking file with a question mark on it. What do I do now? How do I install the software if I can't get on the internet from my MacBook? Can the apple store do it for me?

    Which operating system version did you have? 
    We also need to know which exact model Mac (almost always include this information when you post - saying MaBookPro is almost as bad as saying "Ford car" in terms of the variety of submodels) because some newer models can boot from the Internet.
    OS X: About OS X Recovery - http://support.apple.com/kb/HT4718 - "OS X Lion, Mountain Lion, and Mavericks include OS X Recovery. This feature includes all of the tools you need to reinstall OS X, repair your disk, and even restore from a Time Machine backup without the need for optical discs."

  • I sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

    i sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

    never mind i got it by going into my account and veiwing hidden items and there it was

  • Installing a new hard drive  and want to re-install Photoshop

    I need to install a new hard drive and want to re-install Photoshop. Since I will installing  a new OS, when I deactivate Photoshop from the old hard drive, should I permanently deactivate or suspend activation?

    Help > Deactivate

  • I tried to install a new hard drive using Snow Leopard to back up with Time Machine. When I installed the new HD I installed Leopard (10.5) on it and tried to use time machine to restore the backup I had made using 10.6. Kernel panic screen occurred.

    I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
    The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
    -Steve

    Booting From Snow Leopard Installer Disc
    1. Insert Snow Leopard Installer Disc into the optical drive.
    2. Restart the computer.
    3. Immediately after the chime press and hold down the "C" key.
    4. Release the key when the spinning gear below the dark gray Apple logo appears.
    5. Wait for installer to finish loading.
    Drive Preparation and Installation
    1. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. After formatting is complete quit DU and return to the installer. Install Snow Leopard.

  • Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

    My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
    A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
    How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

    thetrudz wrote:
    A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
    Hi, and welcome to the forums.
    That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
    Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
    He could do it with Snow Leopard but I am scared.
    If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
    Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
    What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
    See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

  • I have a pavillion g42. just installed a new hard drive and the first cd. now my screenis

    Have a pavilion g42 . I just installed a new hard drive. After installing the first CD the screen is just black. What next?

    thats2odd wrote:
    I have about 300 songs missing anyway to update the folder to add the missing songs?
    If you know the location and you have all the songs in there, you could try the below:
    For iTunes 9:
    Choose File > Library > Organize Library
    For iTunes 8:
    Choose File > Library > Consolidate Library
    For iTunes 7 or earlier:
    Choose Advanced > Consolidate Library.
    A message will pop up.
    For iTunes 9:
    Place a check next to "Consolidate files" and click OK.
    For iTunes 8 and earlier:
    Click Consolidate.
    This action copies all of your music and other media files to the new location.

  • I installed a new hard drive and OS X 10.6  and now I don't have an App Store

    I had to install a new hard drive because my previous one failed.  I installed the OS X 10.6 disk that came with my laptop and almost everything is back to normal, except that I do not have an App Store and my iTunes will not connect to the iTunes store.  What can I do?  I updated my software using software updates and nothing has changed.  Please help!

    App store in added as part of 10.6.6 and later.  Make sure you have run all updates.  What version of the OS is reported using the menu item " > About this Mac"?

  • Installing a new hard drive and using Time Machine to Restore system

    I just upgraded a Macbook (2006) hard drive and had problems importing the Time Machine backup. The problem was that the initial install discs were for Tiger, which did not support Time Machine. After numerous attempts at a work-around I solved this problem the following way:
    I connected the 2006 Macbook (with new hard drive) to a newer Macbook (with Firewire port) - one with install discs for Leopard (which supports Time Machine).
    I launched the newer Macbook with the install disc (#1)
    I connected the two Macbook via firewire cable.
    I launched the 2006 (new hard drive) Macbook in the Target Disc mode.
    I connected the USB external hard drive containing the Tme Machine data to a USB port in the newer Macbook.
    Next I went to the Utilities Menu on the Macbook (operating from the Install Disc) and selected Time Machine. I followed the prompts to match the source and destination. The process worked fine.
    The above assumes that a new hard drive is properly formatted using Disc Utility per Apple's guidance prior to the Time Machine restoration described above.
    Cheers.
    Bill

    Bill,
    No, the glass is half full!! In this case, we (collectively) have three things to brighten our day:
    1) That I was mistaken, and that your usage is completely legitimate. I definitely prefer this to what was inherent in my erroneous assumption, and I do not mind being wrong (not in the slightest).
    2) That we can be clever enough to overcome obstacles, then go out of our way to share our newfound knowledge with others. More specifically, that you have done so.
    3) That we are willing to police ourselves, if and when one of us might go astray. Even if I was wrong in this case, isn't it nice to know I am willing scold someone for being less than honorable?
    Perhaps my greatest mistake was the assumption that, if you had the proper disks at one time, you would still have them, or would have said so in your initial post. My apologies. Technically speaking, the media for a given OS should always be somewhere in your possession when running that OS. In practice, however, I strongly believe that some "wiggle room" exists, guided by common sense. In this case, I believe that the fact that you purchased said media gives you a pass, regardless of whether or not you know off the top of your head where it is.
    There. Are you still saddened?
    Scott

  • I had to install a new hard drive and I lost my beats audio please help

    I have a  HP Pavilion dv7 7135us Entertainment Notebook PC and recently lost my hard drive and had to install a new one and now I don't have me beats audio or any of the settings for it, can someone please help me out?

    Hi,
    Please try the follwing package:
       ftp://ftp.hp.com/pub/softpaq/sp57501-58000/sp57966​.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Installing New Hard Drive and Snow Leopard

    I bought a used MacBook Pro with a 100GB drive running Tiger. There's nothing on the drive I want to keep. I have a new 500GB drive that I want to put in the machine and install Snow Leopard. I have no problems physically installing the drive. My question is, when I put the new drive in the computer, do I insert the SL disk before turning on the computer? And will it be an easy install from there? I've done this with Windows, but wasn't sure if the Macs work the same way.

    Just insert the disk shortly after you power up. You may not need to, but hold down c while you are starting. You need to make sure that your disk uses the GUID partition table. After you select your language, look at the menus at the top; select Utilities; and start Disk Utility. Select your drive and make sure it uses GUID. If not, go to Partition and change the partition to GUID. Doing so will format the drive Mac Extended (journaled) (recommended). If not, then you can format again. Just use the quick format option if you need to format. After all of this, quit Disk Utility and continue your installation.
    Message was edited by: donv (The Ghost)

  • I installed a new hard drive and now can't open Adobe Photoshop Elements - what do I need to do?

    My hard drive on my iMac crashed 2 wks ago, and I now have a new SSD harddrive. I had an image of everything from my old hard drive, but Elements won't open. What to do?

    Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
    1. Revert back to Snow Leopard.
    2. Purchase FCP X... 
    if you can't stand FCP X
    3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
    I just got FCS 3 today through apple phone sales..

  • How do I install a New hard drive and transfer my data?

    How do I format and make a bootable drive with all my data and then install it in my late 2008 MacBook Pro ?

    You can install a new drive in a USB enclosure and then use Carbon Copy Cloner to clone your existing drive onto the new drive in the enclosure. Then simply install it in your computer (video -> http://eshop.macsales.com/installvideos/macbookpro_15_unibody_hd/).
    Good luck,
    Clinton

Maybe you are looking for