Installing an ABAP Application Server for ECC6? I am getting a few errors!

Hi All
I assumed that this was a simple procedure when installing an Application server.
Run SAPinst and select Dialog instance and install
My server has Java installed and runs fine until you get to the profile directory stage. and when I enter the directory I get the following message (after 30 seconds or so!)
Connect to message server (mexico/0) failed: NIECONN_REFUSED.
I am not sure why! Can anyone help?
Thanks
Phil

> Hi All
>
> I assumed that this was a simple procedure when
> installing an Application server.
>
> Run SAPinst and select Dialog instance and install
>
> My server has Java installed and runs fine until you
> get to the profile directory stage. and when I enter
> the directory I get the following message (after 30
> seconds or so!)
>
> Connect to message server (mexico/0) failed:
> NIECONN_REFUSED.
That error means, that the message server the system is trying to connect to, is not up and running.
Can you reach the messages server via ping? Is your DNS working (in case you use DNS)?
Markus

Similar Messages

Install additional application server for existing CE7.11 system

Hello Gurus,
We have an existing CE 7.11 system installed. After installation, we have updated the SPS level to 04 recently. The CE 7.11 system is already part of a NWDI track configuration since many months and developers are already using since then.
Now, we need to install an additional application server (dialog instance) for the same system.
I want to know: Do I need to carry out any further post-installation steps after installation of the new app server?
Does it matter that the system is already at a certain SPS level including an updated kernel? Will there be any issues at all?
Basically, what else should I do after the installation of the app server is completed?
Thanks and Regards,
Shitij

Question got repeated by mistake.

Install additional application server for existing CE 7.11 system

Hello Gurus,
We have an existing CE 7.11 system installed. After installation, we have updated the SPS level to 04 recently. The CE 7.11 system is already part of a NWDI track configuration since many months and developers are already using since then.
Now, we need to install an additional application server (dialog instance) for the same system.
I want to know: Do I need to carry out any further post-installation steps after installation of the new app server?
Does it matter that the system is already at a certain SPS level including an updated kernel? Will there be any issues at all?
Basically, what else should I do after the installation of the app server is completed?
Thanks and Regards,
Shitij

Question got repeated by mistake.

Where is the Oracle Application Server for Apex 3.2.1?

Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHat
I think it is here
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
So, which one should I download, or where can I find it?
Thanks.

Hi,
Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHatI think it is here
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
So, which one should I download, or where can I find it?>
Strictly speaking you do not need Application Server or OHS for running Apex, you have an option in ApexListener. If it is a small installation then stick to EPG that comes built-in.
Try downloading the Oracle HTTP Server from here . You will need to check the commercial aspects yourself as OHS is not a free software for Production environment, AFAIK.
Cheers,

How to read excel binary file in ABAP application server

Hi Gurus,
I have to read business partner data from the binary format of an excel file in application server. I searched in forums but only found solutions about using ole2 objects, but in ABAP application server there is no excel APIs, so I have to read binary directly. You know it is rather difficult, do you have any clues or sample function modules? Thanks!
Best regards,
Hao

Hi Deng,
I think there are two possible solutions:
1. Get the file created as tab-delimited or CSV as recommended earlier
2. Excel files are BIFF (Binary Interchange File Format). The Microsoft office 97 developer kit has tools for analysis and access. You may search for existing interface software or create your own ABAP code. Publish it on SDN and win great merits.
Regards,
Clemens

Error while installing Oracle 9i Application server

Hi All,
I am trying to install oracle 9i Application Server 9.0.2.0.0 Enterprise Edition on Windows 2000.
The installation gets stuck up after 40 percent , while trying to copy a file named 'PGPUS.MSB' .
There is no update in the Install Actions Log File also.
While I tried to install oracle 9i Application Server 1.0.2.1.0 for Windows NT and Windows 2000, installation goes OK till 100 percent, after which it encounters Errors in JRE.Exe
Pls help ! Its urgent
thanks in advance
rgds..
Subhas

App Server forum is here:
Oracle Application Server - General (<=== repost question there

Sun Java System Application Server for Mac OS X ?

hi everybody.
does anybody know if (any given date ?) sun is planning to offer a distribution of its sun java system application server for mac os x ? or even better: any ideas on how to install a currently available version on mac os x 10.4 ? the linux bin seems not to be readable.
thank you very much in advance, folks.
and have a nice day
andre from berlin, germany

As you noticed, standalone MacOS distribution of application server is currently not available, but what you can do is to download NetBeans with J2EE bundle or Creator (for free) and install bundled Application Server on this platform. Download URLs are:
http://www.netbeans.info/downloads/download.php?type=4.1
(NetBeans/J2EE cobundle)
http://developers.sun.com/prodtech/devtools/free/
(Creator)
Also, you can install and run Glassfish (which is open-source version of upcoming Application Server 9.0) on MacOS X:
http://java.sun.com/javaee/glassfish/getit.jsp

Version of Application Server for Oracle E-Business suite 12.0.4 ?

Hi ,
I want to know the complete version of Application Server for Oracle E-Business suite 12.0.4 . The installation guide/ rapid install mention this :
A) Oracle database 10.2.0.3
B)Applications Server : 10.1.3 oc4j
C) Application Server : 10.1.2.2 (forms)
D) E-business Applications
But I want to know the complete version for 10.1.3 .Is it 10.1.3-3 or is it 10.1.3.4 or both ? This will help us ind determining the patches which can be applied ?
Thanks.
Best Regards,
brinda

Hi,
Please refer to:
Note: 468311.1 - Script to find Apache, Java, JRE, Forms version for Oracle E-Business Suite R12
Note: 454811.1 - Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12
Regards,
Hussein

How to utilise forms installed in Oracle9i Application Server from client

Dear Friends,
I have installed Oracle 9i Application Server and Forms 5.0 Reports 3.0 in the application server. How to make use of application server so that forms installed in it available to end users, the client. What are the steps i need to do. Please explain.

Forms 5 & Reports 3 in Developer 2.1 have been desupported for a number of years now. If you haven't already figured out how to get it working on the web, download the Forms & Reports Services Standalone version of the 10g Application Server. It has Forms & Reports properly configured after the instalaltion. Just look under the Demonstrations tab of the home page and click to run either Forms or Reports on the web. You can customize your setup afterwards for your application. Of course you'll need to upgrade your application.
You can find this download at:
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
under "Forms & Reports Services Standalone"
It is a 1 CD download.
Cordially,
Steve

Anybody installed Oracle 10g application server on windows 2008 (64 bit) se

Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.
which version of OAS we should use?l. we are using dell server .
regds
santosh
Edited by: user5429538 on Feb 24, 2010 2:59 AM

Hi Santosh,
Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.I dont think any version of Oracle Application Server is certified for windows 2008 yes.
But, u can Install Oracle Application Server 10g Release 2 (10.1.2.0.2) on windows 2003 (64 bit) server
Please refer below links for download and to check certification:
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_101310.html
Hope helps
Regards,
X A H E E R

Adding JBoss Application Server for Monitoring

How do you add a JBoss Application Server for monitoring? Is there a way to add it silently like silent install of the host target?

It is a manual process, you need to launch Jboss discover UI using Targets > Middlware page.
Also, please use JVMD for more detailed analysis.
You need to specify JARs based on the version of the JBoss -
Note - Please check the support site for exact certified versions of JBoss.
JBoss 4:
dom4j.jar jboss-management.jar jnp-client.jar
jbossall-client.jar jboss-client.jar
JBoss 5:
concurrent.jar jboss-javaee.jar jboss-serialization.jar
dom4j.jar jboss-jsr77-client.jar jbosssx-as-client.jar
jbossall-client.jar jboss-logging-spi.jar jbosssx-client.jar
jboss-client.jar jboss-management.jar jnp-client.jar
jboss-common-core.jar jboss-remoting.jar jboss-integration.jar jboss-security-spi.jar
JBoss 6:
concurrent.jar jboss-management.jar
dom4j.jar jboss-remoting.jar
jbossall-client.jar jboss-security-spi.jar
jboss-client.jar jboss-serialization.jar
jboss-common-core.jar jbosssx-as-client.jar
jboss-ejb-api_3.1_spec.jar jbosssx-client.jar
jboss-integration.jar jboss-transaction-api_1.1_spec.jar
jboss-jsr77-client.jar jnp-client.jar
jboss-logging.jar
If you plan to use JVMD then you should select Remote Agent for discovery/monitoring.
JNDI service should be configured and Naming Service port should be open.
Agent should be able to communicate with the host and JNDI port.
Above list of JARs to be copied on the agent machine (location provided as library path during discovery)
Could you please share customer details and usecases.

Application Server for APEX

Hello APEX community
We have alredy APEX in use. Now we want to introduce a Application-Server on a SunOS (sun4u sparc SUNW,Sun-Fire-V240). The Question is: Witch program should we use from oracle "Application-Server"? It has many possibilities. Wath we wont to have is an easy Application-Server from Oracle. The Application run's only on LAN. The Application-server should only serve Applex with all the needet programms e.g. php.
May we ask you witch Application-Server Programm from Oracle should we use. There should be the latest version and as mentioned only for Appex e.g. 3.2 and no other functions. For hints and tips many thanks in advance Best regards Ulrich

Hi,
Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHatI think it is here
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
So, which one should I download, or where can I find it?>
Strictly speaking you do not need Application Server or OHS for running Apex, you have an option in ApexListener. If it is a small installation then stick to EPG that comes built-in.
Try downloading the Oracle HTTP Server from here . You will need to check the commercial aspects yourself as OHS is not a free software for Production environment, AFAIK.
Cheers,

How do i Install the Software Update Server for Windows 7?

How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
I downloaded the software so How do I install it?
Do I install it all over again or when I have windows open?
I am using Bootcamp.

Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

Link error during install of O9i Application server

Hi there.
I have a problem when installing Oracle 9i Application Server rel. 1.0.2.2.0 on SuSE 7.3.
During installation phase "Linking Oracle 9i Application Server rel. 1.0.2.2.0", I get: "Error invoking target install of makefile /
opt/oracle/product/9.0.1/icache/lib/ins_icache.mk"
The make.log states:
building Oracle8i Cache Management Engine
gcc -o /opt/oracle/product/9.0.1/bin/wtcme -L/opt/oracle/product/9.0.1/icache/lib/ -L/opt/oracle/product/9.0.1/lib/ /opt/oracle/pro
duct/9.0.1/icache/lib/wtemain.o /opt/oracle/product/9.0.1/icache/lib/libicache.a /opt/oracle/product/9.0.1/lib/libwtc8.a /opt/oracle
/product/9.0.1/icache/lib/libxml8.a \
-lclntsh /opt/oracle/product/9.0.1/rdbms/lib/kpuadef.o `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8
-lnl8 -lnro8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneri
c8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -ln
ro8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrac
e8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `ca
t /opt/oracle/product/9.0.1/lib/sysliblist` -ldl -lm \
-lpthread -lc
gcc: /opt/oracle/product/9.0.1/rdbms/lib/kpuadef.o: No such file or directory
make: *** [opt/oracle/product/9.0.1/bin/wtcme] Error 1
I had a similar problem when installing the database server software. This was fixed by editing the LD_SELF_CONTAINED parameter in
genclntsh. This, however, does not help in this case.
Kind regards,
Roald Andresen

Hi Melchor,
Please follow SAP Note 1618816 - Permanent or Temporary License Already Exists In Systemcopy
If possible please share files saplikey.log, dev_slic
Regards,
Gaurav

Can i use oracle 8i for oracle 9ias application server for developijsp applicationes?

hi,
can i use oracle 8i database for oracle 9ias application server for developing jsp applicationes?
can any one give suggetion?
jpullareddy

If you are using OLite, you should use the OLite .NET provider:
http://download-west.oracle.com/docs/cd/B14156_01/doc/B13788/html/toc.htm
Look at Chapter 6 and 11, which cover ADO.NET data access.

Installing an ABAP Application Server for ECC6? I am getting a few errors!

Similar Messages

Maybe you are looking for