Installing and Configuring Oracle stand alone grid Using Response Files

Hello ,
I am looking for some help if you have done the oracle restart (standalone grid) installation using response file , when i tried to install using response files it is not creating the ASM disks , so i might be missing some steps . Can you please share if you have done this installation of if you have a right document to do this .
Version i am using 11.2.0.3
OS : Linux
Thanks
Venkat

Use the following in response file, replace oracle_base,oracle_home,oracle_hostname,diskgroup name,redundancy,disks as per your
environment
oracle.install.responseFileVersion=/oracle/install/rspfmt_crsinstall_response_schema_v11_2_0
ORACLE_BASE=/u01/oracle
ORACLE_HOME=/u01/product/11.2.0/grid
INVENTORY_LOCATION=/oracle/install/oraInventory
ORACLE_HOSTNAME=rhel5
oracle.install.option=HA_CONFIG
SELECTED_LANGUAGES=en
UNIX_GROUP_NAME=dba
oracle.install.asm.diskGroup.name=DATA
oracle.install.asm.diskGroup.redundancy=EXTERNAL
oracle.install.crs.config.autoConfigureClusterNodeVIP = false
oracle.install.asm.SYSASMPassword=test
oracle.install.asm.monitorPassword=test
oracle.install.asm.diskGroup.disks=/dev/oracleasm/disks/TEST01,/dev/oracleasm/disks/TEST02
oracle.install.asm.diskGroup.diskDiscoveryString=/dev/oracleasm/disks/*
oracle.install.asm.OSDBA=asmdba
oracle.install.asm.OSOPER=asmoper
oracle.install.asm.OSASM=asmadmin
oracle.install.asm.upgradeASM=false
oracle.install.crs.config.gpnp.scanPort=0
oracle.install.crs.config.clusterName=
oracle.install.crs.config.gpnp.configureGNS=true
oracle.install.crs.config.gpnp.gnsSubDomain=
oracle.install.crs.config.gpnp.gnsVIPAddress=
oracle.install.crs.config.autoConfigureClusterNodeVIP=false
oracle.install.crs.config.clusterNodes=
oracle.install.crs.config.storageOption=
oracle.install.crs.config.sharedFileSystemStorage.diskDriveMapping=
oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=
oracle.install.crs.config.sharedFileSystemStorage.votingDiskRedundancy=NORMAL
oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=
oracle.install.crs.config.sharedFileSystemStorage.ocrRedundancy=NORMAL
oracle.install.crs.config.useIPMI=false
oracle.install.crs.config.ipmi.bmcUsername=
oracle.install.crs.config.ipmi.bmcPassword=
oracle.install.crs.config.privateInterconnects=
oracle.install.crs.config.gpnp.scanName=
oracle.install.crs.upgrade.clusterNodes=

Similar Messages

How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

Hello,
We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
Can anyone please suggest me how to install and configure OSB.
Regards,
Anil

Hi
Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
Regards,
Mitja

Installing and Configuring Oracle Portal

http://oraclelabs.com/index.php/2010/08/30/installing-and-configuring-oracle-portal-forms-reports-and-discoverer/

Try running the diag.cmd and see for the log.If u cannot fig out just post the log too.

What are the prerequisites to install and configure Oracle Coherence 3.4

What are the prerequisites to install and configure an Oracle Coherence (3.4 Grid version) on RHEL5.0 system?
I want to make an Oracle Coherence Gid Data system for testing purpose using 3 machines.
What kind of network configuration is OK?
What software should be installed in advance？
Thank you

Hi,
I would read through the Testing and Tuning section of the following page.
http://coherence.oracle.com/display/COH34UG/Usage+(Full)
Even though you are not about to go into production I think the Production Checklist has some very useful information.
http://coherence.oracle.com/display/COH34UG/Production+Checklist
-Dave

How to install and configure WebLogic 10.3 to use 64-bit JDK?

Hi,
Is there a preferred/supported way to configure WebLogic to use the 64-bit JRockit that comes with JRockit Mission Control?
I can't find any official documentation about how to configure WebLogic to use a 64-bit JDK. From other forum posts I can tell we need to use the 64-bit JRockit that is bundled with JRockit Mission Control (available at [http://www.oracle.com/technology/software/products/jrockit/index.html]) but then we are kind of stuck - the configure script which let me select a JDK for a domain doesn't seem to let me re-configure an existing domain, and I can't find anything within the admin console that would let me set the JDK to use.
I was able to rename the existing jrockit_160_05 directory to e.g. jrockit_160_05_original and then rename the jrmc directory to "jrockit_160_05", effectively taking the place of the JDK being used but this seemed like a bad way to do it. I also found via Google this page: [http://java.sodeso.nl/application-servers/bea-weblogic/how-can-i-change-the-jdk-installation-that-weblogic-uses] which basically says to modify the JAVA_HOME environment variable in the start scripts, but this seems like the same thing.
With the plethora of products and the different ways they are bundled, combined with all the documentation about everything, I thought I would find something but I keep coming up blank. Does anyone have suggestions or pointers?
Thanks,
KaJun

Make sure your environment configuration is supported here:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
Then, you need to have the correct 64bit JDK installed. Sounds like you have done that.
Then download and run the generic platform installer as described here with your 64bit supported JDK:
http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14142/start.htm#i1077535
Notice how the link you post has the generic installer for all the 64bit JVM rows, but the other installer for the 32bit JVMs on the 64bit OS?

How to install and configure Oracle 10g Express Edition on Fedora 11?

Hi everyone!
I have recently installed Oracle 10g XE on my Laptop Gateway T-1625, which has Fedora 11.
I followed the install instructions on [http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm] , and configured the server as explained, but something is wrong... When I try to go to the database home page http://127.0.0.1:8080/apex, I get "Failed to Connect" on Firefox 3.5b4... I don't think it's because of the Firefox version because it's proved to be very stable (for a beta).
I've search for similar issues on GNU/Linux and I found this thread in these forums: [ http://forums.oracle.com/forums/thread.jspa?threadID=915218&tstart=0] , but the solution is for Ubuntu 9.04, and if it's possible I would like to know a specific solution for Fedora 11.
I also tried to see the oracle server status with:
# /etc/init.d/oracle-xe status
And I got this....
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2009 22:10:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=talos)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
I hope someone can help me out and guide me on the right direction. Thanks a lot!

Hi again!
After your last post I realized that the dba group and the oracle user already existed.
#groupadd dba
groupadd: group dba exists
#useradd oracle -d /home/oracle -s /bin/bash -g dba
useradd: user oracle existsHowever, I finally assigned a password for that account and changed the ownership of the /usr/lib/oracle/xe
with the commands you suggested:
passwd oracle
chown -R oracle:dba /usr/lib/oracle/xeAfter this, I can log in as the oracle user but the SELinux showed a warning and the /usr/lib/oracle/xe
is treated as the oracle home, and no .bashrc file is located on this home. This is the SELinux warning:
SELinux is preventing gdm-session-wor (xdm_t) "write" to /usr/lib/oracle/xe (lib_t).
Details:
SELinux denied access requested by gdm-session-wor. /usr/lib/oracle/xe may
be a mislabeled. /usr/lib/oracle/xe default SELinux type is user_home_dir_t, but its
current type is lib_t. Changing this file back to the default type, may fix your problem.
File contexts can be assigned to a file in the following ways.
* Files created in a directory receive the file context of the parent
directory by default.
* The SELinux policy might override the default label inherited from the parent directory
by specifying a process running in context A which creates a file in a directory
labeled B will instead create the file with label C.
An example of this would be the dhcp client running with the dhclient_t type and
creates a file in the directory /etc. This file would normally receive the etc_t type due
to parental inheritance but instead the file is labeled with the net_conf_t type
because the SELinux policy specifies this.
* Users can change the file context on a file using tools such as chcon, or restorecon.
This file could have been mislabeled either by user error, or if an normally confined
application was run under the wrong domain.
However, this might also indicate a bug in SELinux because the file should not have
been labeled with this type.
If you believe this is a bug, please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi)
against this package.
Allowing Acces:
You can restore the default system context to this file by executing the restorecon command.
restorecon '/usr/lib/oracle/xe', if this file is a directory, you can recursively restore using
restorecon -R '/usr/lib/oracle/xe'.
Fix command:
restorecon '/usr/lib/oracle/xe'I suppose the command #useradd oracle -d /home/oracle -s /bin/bash -g dba is where I can define the user's home, but if this user already exists how can I modify its settings?
is SELinux preventing the .bashrc file to be created? or what could be causing this?.
I hope you know how much I appreciate your help and want to thank you for your time.

Install and configure Oracle AS 10g Business Intelligence Comp with SSO

Hi,
Present setup:
We have a Red hat Linux 3.0 ES (update 4).
Netgrity from Site minder installed over windows server for signle sign on.
Oracle 9i release 2 database on a separate Windows server
What i need:
I want to install Oracle Application Sever Business Intelligence Components 10G over the linux and configure with Netegrity Single Sign on. I am not clear what is the installation process and what is the sequence of installation and configuration.
Can anyone help me with the Installation process and sequence.
What should be the sequence is it like below ?
1) first install the Oracle AS 10g Infrastructure over the Linux
2) Secondly install the Oracle Application Sever Business Intelligence Components 10G and integrate with Infrastructure
3) Configure with SSO
or only install the Oracle Application Sever Business Intelligence Components 10G and Configure with SSO is enough ?
Any help in the installation process and sequence of instlallation and how to configure for external single Sign on.
Thanks..

When you want to have SSO you definitly need the infrastructure as the SSO is managed in there.
So first install the infrastructure, then the middle tier (BI components) and then configure the SSO for the BI components.
When this is up and running you have to configure the integration with the SiteMinder. Check out the OID admin guide and the SSO admin guide.
cu
Andreas

How i install oracle client with ODBC using response file method

Hi,
I have managed to create a response file using OUI. Currently, I do not know what are the methods which i can install a group of computers using this response file. Any advise
Thanks in advance.
Best regards,
Tony

Presumably, any method that allows you to remotely run code on the group of computers would allow you to do a silent install of the Oracle client and ODBC driver. I know Microsoft and various third parties sell such tools, but I'm not enough of a Windows admin to know anything about the relative benefits of the products in this category.
Justin

How to Install and Configure Oracle TimesTen

Is there any blog discussing Oracle TimesTen? How to configure it and some sample real-life scenarios?
Any platform or any version will do as long as it will provide good stuff in understanding Oracle TimesTen. Thanks a lot...

Go through the below links these may be useful for you
# TimesTen 11g Quick Start Guide - http://timesten.us.oracle.com/1121/quickstart/index.html
# Installing TimesTen with Cache
windows - http://www.oracle.com/technetwork/database/timesten/tt1121-install-imdb-cache-win-viewl-083324.html /
linux - http://www.oracle.com/technetwork/database/timesten/tt1121-install-imdb-cache-linux-vie-082655.html
# Setting up In-Memory Database Cache - http://timesten.us.oracle.com/1121/imdb_cache.html
# Creating a cache database
windows - http://www.oracle.com/technetwork/database/timesten/tt1121-create-imdb-cache-win-viewle-100094.html
linux - http://www.oracle.com/technetwork/database/timesten/tt1121-create-imdb-cache-linux-view-090461.html
-Venkatesh

Installing And Configuring Oracle Internet Directory

The Problem:
OAS can be accessed from the internal network, but not from the outside.
The configuration:
Firewall/Router OAS
Linux with NetMax Windows NT 4.0
internet ======================= ==================
-------------| Pub IP 196.40.25.81 | | Internal IP |
| Internal IP | | 10.10.10.16 |
| 10.10.10.2 | | |
| NAT enabled and |-----| |
| working. Test with | ==================
| Linux/Apache |
=======================
Machines on the internal network (not shown above) can access OAS with no
problems. Machines on the Internet cannot. A request for URL http://196.40.25.81 returns a message of: "The request did not specify a
valid virtual host".
We have tested the NAT by replacing the OAS server with a Linux/Apache box.
This works with no problems.
We have looked up the message in Oracle's MetaLink database and found that
it relates to a name configuration problem on the Listener secction or that on the server was using DHCP. But on this case both source problems where NOT present, when I install the OAS the server has (an allways have had) a static IP adress, and wave been configured with all the host name + domain name. We have entered the OAS server
name in all possible combinations (lower case, upper case, fully qualified,
internal IP address, public IP address, etc) to no avail. The message
remains the same.
We have tried assigning a public IP (in addition to the internal one) to
the OAS machine. It can reached from the Internet by ping, but not by http.
In this case the host is not found.
If ANYBODY has a posible solution PLEASE EMAIL ME !!!
Thanks
[email protected]
[email protected]

What do you mean by integrate? OID is "C" based so there's no integration with WLS. Or are you asking to leverage OID for authentication for WLS?
--Olaf

Install and Configure Oracle client in Fedora core 3

Hi guys
I am raghu ,
I need a help regarding Oracle client installation in Fedora core 3
can any one guide where to get oracle client and installation steps
Thanks
Raghu

Hello.
You could use paper for installation of 9i or 10g database because client is one of options of installer.
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
http://ivan.kartik.sk/oracle/install_ora10gR2_fedora.html
http://www.oracle.com/technology/tech/linux/install/index.html
You could also install only instant client (so you don't need download all 3 CDs of Oracle database) and set appropriate enviroment.
You could obtain it from:
http://www.oracle.com/technology/tech/oci/instantclient/instantclient.html

How to Install and configure Oracle Jinitiator

Before runing Forms9i i start oc4j and when i execute form it shows me
error and ask to install Oracle Jinitiator at the same time on oc4j command window
show
configFileName:G:\ORACLE\ORA90/FORMS90/SERVER/formsweb.cfg
testmode: false

Assuming you want to use Jinitiator (instead of Sun JVM) you simple download the exe file and it installs in a minute. You can download it from otn.oracle.com/products/forms make sure you install the version our Forms is asking you to install
Regards
Grant Ronald
Oralce Product Management

Installing and Configuring Oracle XML DB + Update Configuration, cfg_update

Hi All,
I want to change the default port for FTP and HTTP for storing my XSD.
I have used the following procedure.
BEGIN
DBMS_XDB.CFG_UPDATE(UPDATEXML(UPDATEXML
(DBMS_XDB.CFG_GET(),
/xdbconfig/descendant::ftp-port/text()', '2121'),
'/xdbconfig/descendant::http-port/text()',
19090'))
END;
But, this is not working. This is showing error like:
PLS-00201: identifier 'UPDATEXML' must be declared
I have login through SYS login.
Please resolve this error for me.
Should I run this command from some different user.
Please reply me soon.
Thanks in Advance....

The easiest way to do this, is using[b] dbms_xdb.setHttpPort and dbms_xdb.setFtpPort methods.
See also http://www.liberidu.com/blog/?p=180 ("HOWTO: Enable the Protocol Server (Listener)")
and http://www.liberidu.com/blog/?p=116 ("Registering non-default XMLDB HTTP/WebDAV and FTP ports on a non-default Oracle Listener port")

How to install and configure Oracle Trafic Director and OAM webgate ( Doc ID 1906445.1 )

Anybody knew, why i can not access this document? I am in the middle of project implementation, and Oracle support direct me to this document, but for some reason, can not find it.

Ok so I went and copied the image directory to both WLS servers in the correct directory that was dictated when creating the image war (i.war). Seems to work.
Thx,
Russ

Installing and Configuring Oracle WebLogic Server 11g

Hi, I have a question about the installation of Oracle WebLogic Server 11g (10.3.5) high availability, there is some documentation of best practices on this issue.
Thanks

http://download.oracle.com/docs/cd/E21764_01/web.1111/e13709/toc.htm

Installing and Configuring Oracle stand alone grid Using Response Files

Similar Messages

Maybe you are looking for