Installing and Configuring Oracle WebLogic Server 11g

Hi, I have a question about the installation of Oracle WebLogic Server 11g (10.3.5) high availability, there is some documentation of best practices on this issue.
Thanks

http://download.oracle.com/docs/cd/E21764_01/web.1111/e13709/toc.htm

Similar Messages

  • How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

    Hello,
    We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
    Can anyone please suggest me how to install and configure OSB.
    Regards,
    Anil

    Hi
    Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
    For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
    Regards,
    Mitja

  • How to install and configure the SQL Server

    Hi All,
    We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
    Kind Rgds,
    Steve

    Hi,
    Try this solution:
    The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
    Below are some important parts that you should pay attention to during the Installation process.
    Resolution
    Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
    Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
    Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
    Rgds,

  • How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

    How to install and configure ms exchange server 2007 both role hub and edge transport role in one network 

    Hi,
    Edge role is design for perimeter networks, to keep security risks minimum.  So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
    If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
    Thanks.
    MachPanel - Premium Cloud Automation Solution

  • How to install and configure NI Visa Server without having to install MAX?

    Hi,
    I need to install NI Visa Server on a computer so that remote systems can connect to the devices connected to it. However, the flash-drive on the computer is marked as "removable media" by the operating system which is causing the MAX installer to error out (this is a known problem with standard windows installers and removable media).
    Before pursuing a hardware change, I was wondering if there was a way to install and configure NI Visa Server on the embedded computer without having to install or configure through MAX?
    Thanks in advance for any help.

    Hello!
    Your system should appear under remote systems and then you can right click on the software folder and install software. Our 8145s for instance have compact flash drives and this process works. Could you give me more details on your hardware? Are you getting an error message when you try to install the software?
    Allan S.

  • Oracle Standard Edition 1 / Oracle WebLogic Server 11g Standand Edition

    Can anyone tell me if WebLogic Server 11g Standard Edition can be used for installations that use the "Oracle Standard Edition 1" of the database?
    If so what sort of licensing costs would be associated with Oracle WebLogic Server 11g Standard Edition?
    Thanks!

    Can anyone tell me if WebLogic Server 11g Standard Edition can be used for installations that use the "Oracle Standard Edition 1" of the database?
    If so what sort of licensing costs would be associated with Oracle WebLogic Server 11g Standard Edition?
    Thanks!

  • Installing and configuring microsoft sharepoint server 2013

    Could you please advise where can I get this book "installing and configuring microsoft sharepoint server 2013"? Thanks for your help.

    There is a free ebook here:
    http://www.microsoft.com/en-us/download/details.aspx?id=30384
    It's also the title of a section of technet but that's not available in printed format as far as i know.
    http://technet.microsoft.com/en-us/library/cc262957.aspx

  • Installing and Configuring Oracle Portal

    http://oraclelabs.com/index.php/2010/08/30/installing-and-configuring-oracle-portal-forms-reports-and-discoverer/

    Try running the diag.cmd and see for the log.If u cannot fig out just post the log too.

  • Oracle Identity Manager 9.1.0.2 and Oracle Weblogic server 11g R1 b(10.3.1)

    Hi,
    can we Install Oracle Identity Manager 9.1.0.2 version on Oracle Weblogic server 11h R1 b(10.3.1)?
    Is it OIM 9.1.0.2 compatible to install on Oracle Weblogic server 11h R1 b(10.3.1).
    Early response is appreciated

    Check this
    http://www.oracle.com/technology/software/products/ias/files/idm_certification_101401.html#BABGBGHI
    And Oracle has mentioned that
    *2.1 Certified Application Servers*
    Note: There is no change in application server certification from
    release 9.1.0.1 to release 9.1.0.2.
    Oracle WebLogic Server 10.3
    But you can try with new version of Weblogic. It shouldn't create any problem.

  • What are the prerequisites to install and configure Oracle Coherence 3.4

    What are the prerequisites to install and configure an Oracle Coherence (3.4 Grid version) on RHEL5.0 system?
    I want to make an Oracle Coherence Gid Data system for testing purpose using 3 machines.
    What kind of network configuration is OK?
    What software should be installed in advance？
    Thank you

    Hi,
    I would read through the Testing and Tuning section of the following page.
    http://coherence.oracle.com/display/COH34UG/Usage+(Full)
    Even though you are not about to go into production I think the Production Checklist has some very useful information.
    http://coherence.oracle.com/display/COH34UG/Production+Checklist
    -Dave

  • How to install and configure a boradcasting server ?

    I want to install and configure a broadcasting service.
    - Where can I find the service (software) ?
    - What kind OS is needed ?
    - is it possible to install on a PC ?
    - docs ???
    Please Help needed
    Kind regards

    HI  Michel Hellmann ,
    Please check:
    [Information Broadcasting Part 1 u2013 System Parameter Setting|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-1-system.html]
    [Information Broadcasting-Part 2 -System Settings|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-2-system.html]
    [Information Broadcasting Part 3 u2013 Scheduling the First Report|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-3.html]
    [How To... Troubleshoot Information Broadcasting (BEx Workbooks)|http://sapbwneelam.blogspot.com/2008/09/how-to-troubleshoot-information.html]
    Hope it Helps
    Srini

  • How to install and configure Oracle 10g Express Edition on Fedora 11?

    Hi everyone!
    I have recently installed Oracle 10g XE on my Laptop Gateway T-1625, which has Fedora 11.
    I followed the install instructions on [http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm] , and configured the server as explained, but something is wrong... When I try to go to the database home page http://127.0.0.1:8080/apex, I get "Failed to Connect" on Firefox 3.5b4... I don't think it's because of the Firefox version because it's proved to be very stable (for a beta).
    I've search for similar issues on GNU/Linux and I found this thread in these forums: [ http://forums.oracle.com/forums/thread.jspa?threadID=915218&tstart=0] , but the solution is for Ubuntu 9.04, and if it's possible I would like to know a specific solution for Fedora 11.
    I also tried to see the oracle server status with:
    # /etc/init.d/oracle-xe status
    And I got this....
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2009 22:10:31
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 2: No such file or directory
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=talos)(PORT=1521)))
    TNS-12545: Connect failed because target host or object does not exist
    TNS-12560: TNS:protocol adapter error
    TNS-00515: Connect failed because target host or object does not exist
    I hope someone can help me out and guide me on the right direction. Thanks a lot!

    Hi again!
    After your last post I realized that the dba group and the oracle user already existed.
    #groupadd dba
    groupadd: group dba exists
    #useradd oracle -d /home/oracle -s /bin/bash -g dba
    useradd: user oracle existsHowever, I finally assigned a password for that account and changed the ownership of the /usr/lib/oracle/xe
    with the commands you suggested:
    passwd oracle
    chown -R oracle:dba /usr/lib/oracle/xeAfter this, I can log in as the oracle user but the SELinux showed a warning and the /usr/lib/oracle/xe
    is treated as the oracle home, and no .bashrc file is located on this home. This is the SELinux warning:
    SELinux is preventing gdm-session-wor (xdm_t) "write" to /usr/lib/oracle/xe (lib_t).
    Details:
    SELinux denied access requested by gdm-session-wor. /usr/lib/oracle/xe may
    be a mislabeled. /usr/lib/oracle/xe default SELinux type is user_home_dir_t, but its
    current type is lib_t. Changing this file back to the default type, may fix your problem.
    File contexts can be assigned to a file in the following ways.
      * Files created in a directory receive the file context of the parent
        directory by default.
      * The SELinux policy might override the default label inherited from the parent directory
    by specifying a process running in context A which creates a file in a directory
    labeled B will instead create the file with label C.
        An example of this would be the dhcp client running with the dhclient_t type and
    creates a file in the directory /etc. This file would normally receive the etc_t type due
    to parental inheritance but instead the file is labeled with the net_conf_t type
    because the SELinux policy specifies this.
      * Users can change the file context on a file using tools such as chcon, or restorecon.
    This file could have been mislabeled either by user error, or if an normally confined
    application was run under the wrong domain.
    However, this might also indicate a bug in SELinux because the file should not have
    been labeled with this type.
    If you believe this is a bug, please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi)
    against this package.
    Allowing Acces:
    You can restore the default system context to this file by executing the restorecon command.
    restorecon '/usr/lib/oracle/xe', if this file is a directory, you can recursively restore using
    restorecon -R '/usr/lib/oracle/xe'.
    Fix command:
    restorecon '/usr/lib/oracle/xe'I suppose the command #useradd oracle -d /home/oracle -s /bin/bash -g dba is where I can define the user's home, but if this user already exists how can I modify its settings?
    is SELinux preventing the .bashrc file to be created? or what could be causing this?.
    I hope you know how much I appreciate your help and want to thank you for your time.

  • Install and configure Oracle AS 10g Business Intelligence Comp with SSO

    Hi,
    Present setup:
    We have a Red hat Linux 3.0 ES (update 4).
    Netgrity from Site minder installed over windows server for signle sign on.
    Oracle 9i release 2 database on a separate Windows server
    What i need:
    I want to install Oracle Application Sever Business Intelligence Components 10G over the linux and configure with Netegrity Single Sign on. I am not clear what is the installation process and what is the sequence of installation and configuration.
    Can anyone help me with the Installation process and sequence.
    What should be the sequence is it like below ?
    1) first install the Oracle AS 10g Infrastructure over the Linux
    2) Secondly install the Oracle Application Sever Business Intelligence Components 10G and integrate with Infrastructure
    3) Configure with SSO
    or only install the Oracle Application Sever Business Intelligence Components 10G and Configure with SSO is enough ?
    Any help in the installation process and sequence of instlallation and how to configure for external single Sign on.
    Thanks..

    When you want to have SSO you definitly need the infrastructure as the SSO is managed in there.
    So first install the infrastructure, then the middle tier (BI components) and then configure the SSO for the BI components.
    When this is up and running you have to configure the integration with the SiteMinder. Check out the OID admin guide and the SSO admin guide.
    cu
    Andreas

  • Step by Step of how to Install and configure the Web Server Core 2008 R2

    I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
    "The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
    computer. Details: Unable to connect to the remote server "   I think those couple of video will be helpfull,
    so I decided to record and share this experience with you by producing the server core from A  to Z to avoid the headache that I encountred
    during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as  the steps are the
    same
    http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
    watch?v=5z1NiWUJdGU  Wipe generation
    watch?v=Q3BoLkWWAC4  hard disk preparation
    watch?v=lOPvy-cn0Uk  server core installation
    watch?v=gTnOUJfRkDg  configure the web server
    watch?v=0ofvknXMNsc  install .net framework in the webserver
    watch?v=K4ADBzZeM6E  install the web server role
    watch?v=oGHC0sbe17Y  remote control the server
    watch?v=SpzAsRkjV40  continue the remote configuration
    watch?v=XjPD8U_y29I  Create and alias for the web server
    watch?v=Pim1T6z6DJM  Configure a Win 7 machine to control
    Enjoy  the vids
    The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

    Hi MASNSN,
    Thanks for your sharing =)

  • How does WSUS work when an SCCM 2012 R2 server is newly installed? Should WSUS be installed and configured on same server?

    Let me clarify.
    We had a functional WSUS server delivering our updates to ours workstations. The location of the WSUS server was pushed out by Group policies.
    Later, an SCCM 2012 R2 installation was installed. The original WSUS server was removed. Now WSUS type services appear to be broken.
    I tried to start WSUS on the SCCM 2012 R2 server and it does not start. (I assume its not configured).
    I want to get WSUS running again but am not sure how to do this safely in conjunction with our SCCM 2012 R2 installation. Do I just reinstall WSUS on the SCCM server and configure? Or is there other preferred methods?
    I was not involved in SCCM's installation, so I do not know what was done.
    Geoff.

    Update functionality is provided via the Software Update Point
    https://technet.microsoft.com/en-us/library/gg712312.aspx
    ... which requires WSUS to be installed - it basically takes control of WSUS.
    Any existing group policies defining WSUS servers should be removed so that the SCCM client (which I assume is installed on computers already) can configure accordingly. Otherwise you will have group policy and SCCM client over writing one another to configure
    the update server

Maybe you are looking for