Installing and Configuring the Apache HTTP Server Plug-In

Hi,
I am using WL10.3 in Linux machine.
I have an environment where I have a single WL server in a domain that is deployed with the web-application
And I have another domain where I have two managed servers in a cluster that is deployed with the business.
Now, I want to configure a Apache HTTP server to make it work as a proxy along with the weblogic.
In my current scenario, the stand alone server proxies the req to the cluster and that is defined in a jndi.properties.
Now, what should I do if I want to use the Apache
I have the following questions:
1. Forget about my env, generally how can I install and configure Apache HTTP plug-in?
I see we already having libproxy_61.so file inside /bea/wlserver_10.3/server/plugin/linux/i686
Do i need to install the patch even then as told in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?
2. While am adding the lines in httpd.conf ,
LoadModule weblogic_module modules/mod_wl_22.so
Should I put ibproxy_61.so instead of mod_wl_22.so in this line?
3. Just by configuring the proxy, the session replication and load balancing will be ensured?
4.And for my configuration as stated at the beginning few lines, what can be the best architecture?
Your help is really appreciated.

Hi,
Below blog would give you a clear understanding of the Integrating Apache with Weblogic. All your questions are been answered in the below blog.
http://www.prasannatech.net/2008/07/integrating-apache-tomcat-weblogic.html
You can for sure apply the patch provided in CVE-2008-3257).
Keep posted with your findings and let us know if you need any further clarification.
Regards,
Hussain

Similar Messages

Installing the Apache HTTP Server Plug-In as a Dynamic Shared Object

My environment is: Windows 2000 Server SP3 + Apache 2.0.45 + WebLogic 7.0 SP2
I followed the install guide.
1. Locate the shared object file for your platform. >>> No problem
2. Enable the shared object. >>> No problem
3. Install the Apache HTTP Server Plug-In in the Apache server with a support
program called apxs (APache eXtenSion) that builds DSO-based modules outside of
the Apache source tree, and adds the following line to the httpd.conf file:
>>> I don't know how to do this. where can I find apxs,
>>> and should I add "AddModule mod_so.c" in httpd.conf
>>> I did it, but Apache -t tell me:
>>> Syntax error on line 173 of D:/Program/Apache/Apache2/conf/httpd.conf:
Invalid command 'AddModule', perhaps mis-spelled or defined by a module not incl
uded in the server configuration
I don't understand the 4th step, where can I find 'perl' and how to use it?
thanks.

For Apache 2.x I think you use LoadModule instead of AddModule. That's what
the docs say anyway.
"muli" <[email protected]> wrote in message
news:3ed558aa$[email protected]..
>
My environment is: Windows 2000 Server SP3 + Apache 2.0.45 + WebLogic 7.0SP2
>
I followed the install guide.
1. Locate the shared object file for your platform. >>> No problem
2. Enable the shared object. >>> No problem
3. Install the Apache HTTP Server Plug-In in the Apache server with asupport
program called apxs (APache eXtenSion) that builds DSO-based modulesoutside of
the Apache source tree, and adds the following line to the httpd.conffile:
I don't know how to do this. where can I find apxs,
and should I add "AddModule mod_so.c" in httpd.conf
I did it, but Apache -t tell me:
Syntax error on line 173 ofD:/Program/Apache/Apache2/conf/httpd.conf:
Invalid command 'AddModule', perhaps mis-spelled or defined by a modulenot incl
uded in the server configuration
I don't understand the 4th step, where can I find 'perl' and how to useit?
>
thanks.

Installing the Apache HTTP Server Plug-In on Win2000 apache server for WebLogic 6.0

Hi, I was wondering if there was a plugin available for apache on a win 2000. I
only see those for unix solaris, hp. I need one for my Win2000 apache server to
proxy requests to my weblogic6.0 clustered servers. Thanks.

I guess this is not available for 6.0sp1 users, since I cannot find this folder.
Thanks,
Diana
"Jong Lee" <[email protected]> wrote:
>
We only support apache20 on win32 platform.
You can find mod_wl_20.so in $WLS_HOME/bin/apache20 from 6.1.
"Jane" <[email protected]> wrote:
Hi, I was wondering if there was a plugin available for apache on awin
2000. I
only see those for unix solaris, hp. I need one for my Win2000 apache
server to
proxy requests to my weblogic6.0 clustered servers. Thanks.

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

Where can I download "apache http server plug-in", where apache is on Redhat Linux 7.2

hi,
very urgent!
where can I download "apache http server plug-in", where apache
web server is on Redhat Linux 7.2.
in my situation,I want to proxy all requests to weblogic 6.1,which is on win2000.
thanks
jy

Hi,
You can try using the following approach with +'MatchExpression'+ parameter for the +'VirtualHost'+ configuration, which should solve your problem:
<VirtualHost *:80>
ServerAdmin [email protected]
ServerName << Put your apache server ip-address here>>
ErrorLog logs/error_log
<Location */CustomLocationPrefix1** >
SetHandler weblogic-handler
+## Select the list of apps/urls for APP1+
WebLogicCluster 192.168.100.1:7001,192.100.1:7002
CookieName CUSTOM_JSESSIONID_COOKIE_NAME_1
Debug ALL
DebugConfigInfo ON
WLLogFile C:/wlproxy.log
</Location>
<Location */CustomLocationPrefix2** >
SetHandler weblogic-handler
+## Select the list of apps/urls for APP2+
WebLogicCluster 192.168.100.3:7001,192.168.100.4:7002
CookieName CUSTOM_JSESSIONID_COOKIE_NAME_2
Debug ALL
DebugConfigInfo ON
WLLogFile C:/wlproxy.log
</Location>
<Location */CustomLocationPrefix3** >
SetHandler weblogic-handler
+## Select the list of apps/urls for APP3+
WebLogicCluster 192.168.100.5:7001,192.168.100.6:7002
CookieName CUSTOM_JSESSIONID_COOKIE_NAME_3
Debug ALL
DebugConfigInfo ON
WLLogFile C:/wlproxy.log
</Location>
<IfModule mod_weblogic.c>
+## Combine all the locations for the different web-apps you want to route through apache http server+
+## (i.e., APP1, APP2, APP3 in this case).+
WebLogicCluster 192.168.100.1:7001,192.168.100.2:7002,192.168.100.3:7001,192.168.100.4:7002,192.168.100.5:7001,192.168.100.6:7002
MatchExpression *
+## The following may not be needed (need to recheck)+
EnforceBasicConstraints OFF
</IfModule>
</VirtualHost>
Regards,
Deepak Kerur.
Edited by: user10231088 on Jul 7, 2011 6:36 PM
Edited by: user10231088 on Jul 7, 2011 6:36 PM

How to install and configure Sun java messaging server 6 2005Q4

Hi all,
Please tell the steps to install and configure Sun Java Messaging Server 6 2005Q4.
Thanks.

You aren't providing a lot of informations... in this case the answer could be: run the command
/cdrom/jes_05_q4_dvd/Solaris_sparc/installer
if you just want to install messaging server on a single host, for evaluation purpose, in the documentation
http://docs.sun.com/app/docs/doc/819-4879
there is an exhaustive guide. If instead you're trying to addres some specific question, then please give us more details such as O.S., schema version, and so on...
regards

INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name    Microsoft Windows 7 Professional
Version    6.1.7601 Service Pack 1 Build 7601
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name   ...........-HP
System Manufacturer    Hewlett-Packard
System Model    HP ProBook 4530s
System Type    x64-based PC
Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version    2.6
Windows Directory    C:\windows
System Directory    C:\windows\system32
Boot Device    \Device\HarddiskVolume1
Locale    United Kingdom
Hardware Abstraction Layer    Version = "6.1.7601.17514"
User Name    ...........-HP\................
Time Zone    South Africa Standard Time
Installed Physical Memory (RAM)    4.00 GB
Total Physical Memory    3.94 GB
Available Physical Memory    1.00 GB
Total Virtual Memory    7.87 GB
Available Virtual Memory    1.25 GB
Page File Space    3.94 GB
Page File    C:\pagefile.sys

To clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK

Apache HTTP Server Plug-In for HPUX

First action:
Installation of
BEA Weblogic Server 6.1 Servicepack 4
Apache Webserver Version 2.0.43
gcc 3.0.2
on
HP-UX hansapp4 B.11.11 U 9000/800
Apache Webserver can be started !
Aditional Action:
Installation of BEA's Apache HTTP Server Plug-In
as a dynamic shared object:
Copy of mod_wl_20.so to APACHE_HOME/modules
Adaption of httpd.conf by adding line
"LoadModule weblogic_module modules/mod_wl_20.so"
Result:
Apache Webserver cannot be started !
Start of
root@hansapp4:/usr/local/apache2/bin> ./apachectl configtest
gives:
Syntax error on line 234 of /usr/local/apache2/conf/httpd.conf:
Cannot load /usr/local/apache2/modules/mod_wl_20.so into server:
Call to mmap() failed - TEXT /usr/local/apache2/modules/mod_wl_20.so

While the question is for AS 8, you can try this (mod_proxy-based):
http://docs.sun.com/source/817-3652-10/agplugin.html#wp34000
-Alexis

Step by Step of how to Install and configure the Web Server Core 2008 R2

I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
"The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
computer. Details: Unable to connect to the remote server " I think those couple of video will be helpfull,
so I decided to record and share this experience with you by producing the server core from A to Z to avoid the headache that I encountred
during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as the steps are the
same
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Hi MASNSN,
Thanks for your sharing =)

Problem while configuring the Apache Web Server as the Intermediary Server

Hello,
I want to use Apache 2.0 web-server as a proxy for my SAP EP so that I could access http://portal_server:50000/irj through this Apache external web-server.
I checked this sap help link as a reference.
http://help.sap.com/saphelp_nw04/helpdata/en/18/5cea2296190e4cb7faf9468ad793ea/frameset.htm
But still not clear what exact configuration I need to do in the httpd.conf file. I searched the posted forums on this topic but couldnt get exact steps.
It would be grateful if anyone can guide me on this configuration (redirecting url etc).
Thanks in advance.
-Mandar

STEPS OF SECURE APACHE-SSL
1.Install apache version like apache_x_y_z_win32.exe also select the right combination of mod_ssl and Openssl.
(Like for apache1.3.33 you need mod_ssl_2.8.22 and Openssl_0.9.7f or Openssl_0.9.7g.
                   Or
Select a mix of all three like [Apache_1.3.33-Mod_SSL_2.8.22-Openssl_0.9.7f-Win32.zip]
(for this install apache service also).
2.    Select   httpd.conf file from (apache\conf) open it for configuration.
3.   Stop the services of apache from Control panel \ administrative tools \ services.
         Note:-- may be it is possible all files for configuration will not be there in apache2.exe then extract the
          Apache_2.0.54-Mod_SSL_2.8.22-Openssl_0.9.7f-Win32.zip file and copy conf,lib,modules logs
files in corresponding folder of Apache2.exe.
                                             HTTPD.CONF   Configuration
1.     Replace all occurrences of www.my-server.dom with the real domain name!
       (If you have installed apache from .exe file then its doesnt required but for . Zip archive file you have to replace it)
2.     Comment port 80 like # port 80
3.     Write Listen 80 and Listen 443 in httpd.conf file.
4.     Extract Openssl in any folder and copy files ssleay32.dll and libeay32.dll into WINNT\SYSTEM32 paste them here.
5.     Download Openssl.cnf file because you need to configure openssl.exe. a link apear select saveas and save it to bin folder of apache2 directory
6.     Copy all the *.exe, *.so, *.dll inside your apache\bin directory from extracted Openssl directory.
7.     Write
              LoadModule ssl_module modules/ApacheModuleSSL.dll
                  or
              LoadModule ssl_module modules/ApacheModuleSSL.so
                  or
              LoadModule ssl_module modules/mod_ssl.so
             after the LoadModule lines that are already in the httpd.config file
      8.    Write AddModule mod_ssl.c this for apache1 for apache2 it is noy required.
           after the AddModule lines that are already in the httpd.config file.
     9. Add the following to the end of httpd.conf:
                    SSLMutex sem
                    SSLRandomSeed startup builtin
                    SSLSessionCache none
                    SSLLog logs/SSL.log
                    SSLLogLevel info
                    SSLEngine On
                    SSLCertificateFile conf/ssl/my-server.cert
                    SSLCertificateKeyFile conf/ssl/my-server.key
                    ProxyRequests Off
<Proxy *>
Order deny,allow
Allow from all
</Proxy>
ProxyPass / http://ServerName:50000/     // your server name and port number
ProxyPassReverse / http://ServerName:50000/   // your server name and port number
ProxyPreserveHost On
save the Httpd.conf file
                                                 GENERATING CERTIFICATE
a.     Open Command Prompt
b.     Reach till bin directory by writing like   cd apache\bin
c.     Write command     bin> openssl req -config openssl.cnf -new -out my-server.csr and put required detail.
d.      Write openssl rsa -in privkey.pem -out my-server.key.
e.     Write openssl x509 -in my-server.csr -out my-server.cert -req -signkey my-server.key -days 365.
f.     Write openssl x509 -in my-server.cert -out my-server.der.crt -outform DER.
g.     Create an Apache/conf/ssl directory and move my-server.key and my-server.cert into it.
10.     Start Apache services from control panel \ Administrative tools \ services.
11.     Now you have made Apache as SSL enabled open browser and test it by https://localhost

How do I install and configure the Java Access Bridge?

I've just installed the Oracle 9i database on this Windows 2000
Pro box with a view to learn what there is to learn about
Oracle. I need to install the Java Access Bridge so that I can
access the Oracle applications. I use a screen reader called
JAWS from Freedom Scientific.
Can anyone please tell me how to install the necessary Access
Bridge components and how to configure things accordingly so
that adaptive software will work correctly with the Oracle
applications.
Adrian

You can do all the networking stuff you need by setting a "bridged" adapter in the VM setup, then configure a valid IP in your guest OS, probably using the same gateway and name servers similar to your host OS.
If you you cannot use a bridged mode adapter because your host network does not support another network card, you can configure a NAT and a host-only adapter in the VM setup as following:
When you configure the network device that corresponds to the NAT device on the on the guest side, set it up to obtain the IP address via DHCP. The NAT device is for outgoing connections to the internet only. VBox will not provide any routing from the outside network to interface behind a NAT device, only via it's own internal DHCP routing.
The host-only adapter is only good for connection between the host and the VM guest. It is primarily designed to provide DHCP like the NAT interface, but does allow a manual configuration, by customizing the "vboxnet0" configuration in the Vbox Network preferences. By default, the IP address range 192.168.56.1 to 192.168.56.100 can be used for manual IP configurations.
It was not mentioned in your requirements, but you need a bridged mode adapter if you want to connect to your guest VM from any other machine beside your host system, e.g. local LAN.

Installing and configuring the 9i or 10g Application server

hello fellow application developers / DBA's
i have bin struggling to install the 9i or 10g application server because i want to teach oracle portals. please can some 1 teach me or giv me the step by step to installing the application server , then installing oracle portals. i rili am in nid of all d information . thanks

As far as installing Application Server (contains Oracle Portal) goes, I suggest using the installation guides for your platform. These are available on the Application Server documentation library page on OTN at http://www.oracle.com/technology/documentation/appserver101202.html.
For information about Oracle Portal, please refer to the Portal center on OTN at http://www.oracle.com/technology/products/ias/portal/index.html.
Regards,
Pete

How to install Soap on the (Apache) Oracle HTTP Server

Hi,
Does anyone know how to install SOAP on the Oracle HTTP Server? I downloaded a soap version (it seems that the standard version comes without SOAP) from the xml.apache.org site and followed the installation instructions as far as I could (only Tomcat is described). However, no 'soaping'!!! Maybe I'm overlooking something because I cannot imagine that it should be difficult.
Thanks in advance!
Hans

Hans, the SOAP implementation is part of OC4J. You get it out of the box. Check out how to use the out-of-the-box implementation in the tutorials on Web services with Oracle9i JDeveloper at:
http://otn.oracle.com/tech/webservices/htdocs/series/content.html
These tutorials/samples use the implementation of SOAP/WSDL that Oracle calls J2EE Web Services and this is the long term direction of Oracle's Web services implementation. This implementation is what Oracle will be evolving to Sun's Java Web Services Developer Pack as it finalizes into J2EE 1.4.
If you want to use Oracle/Apache SOAP, this too is included in OC4J but its support is being deprecated in future releases of Oracle9iAS in favour of the J2EE Web Services implementation. To find it, check out the OC4J/soap/webapps/ directory for the soap.ear file (it is in a slightly different spot if you are using the full Oracle9iAS R2 but still within the soap directory structure. Simply add <application name="soap" path="../../../soap/webapps/soap.ear" auto-start="true"/> to your OC4J server.xml and <web-app application="soap" name="soap" root="/soap" /> to your OC4J http-web-site.xml, re-start and away you go.
Finally, just to be sure, SOAP support in Oracle9iAS did not appear until 1.0.2.2.x and higher. If using 1.0.2.1 or less, you are correct, there is no SOAP support.
Mike.
Most folks that try out the J2EE Web Services find it is pretty easy to use so

Configuring Apache HTTP Server with Oracle Weblogic Server plugin

Hello friends,
I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
*************************************************log****************************************************
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431>
================New Request: [GET /images/cab.gif HTTP/1.1] =================
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
secondaryJVMID: [NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Thanks

"One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
with server 3 going down it does 1-2-1-2-1...
An example configuration (with SSL off) looks as follows:
LoadModule weblogic_module   "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
<IfModule weblogic_module>
     ConnectTimeoutSecs 10
     ConnectRetrySecs 2
     DebugConfigInfo ON
     WLSocketTimeoutSecs 2
     WLIOTimeoutSecs 300
     Idempotent ON
     FileCaching ON
     KeepAliveSecs 20
     KeepAliveEnabled ON
     DynamicServerList ON
     WLProxySSL OFF
</IfModule>
<Location /LoadTest6>
     SetHandler weblogic-handler
     WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
</Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
"the plugin sometimes redirects to the other active node"
This is somewhat strange, do you have session binding turned off?
"and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html

Apache http server won't run - error 1067 - after installing forms

Hi, I succesfully installed the 9i on a Windows XP machine. I included the Apache HTTP server in the install. It all worked fine. Then I installed the Oracle development suite (rapid application development selection), and since cannot get the Apache server to run. It gives error 1067. On issueing "F:\oracle\ora90\Apache\Apache>apache.exe start -k" I get the following error: "Syntax error on line 14 of F:\oracle\ora90\rdbms\demo\aqxml.conf: Invalid command 'ApJServGroupMount', perhaps mis-spelled or defined by a module not included in the server configuration".
Any ideas?? I amnew to both Oracle and Apache. Thanks for any help offered.

did you install the development suite on a different Oracle home? In case it is on its own oracle home, it happens that the new install overwrites the PATH environment variable and sets the path of the new oracle home prior to the previously installed oracle home, this could affect old oracle home, since it will be looking for libraries and executables at the wrong OH. Change back the PATH environment variable, so the old OH is referred first.
Start once more the oracle http server, first by means of the windows service, and verify the httpd.pid file doesn't exist prior to attempt restarting it.
~ Madrid

Installing and Configuring the Apache HTTP Server Plug-In

Similar Messages

Maybe you are looking for