Installing BPC NW 7.0 - Problem with SystemAdmin User ID

Dear experts,
I´m trying to install BPC 7.0 for NW but there´s a problem regarding installation guide page 21 u201CSpecify the Administrator and password for the Windows Server that you are logged on tou2026u201C. .Net Server Components is supposed to be installed on a Win 2003 Server (32Bit). For the installation I logged on with my domain user[USER1]. This user is defined as a local administrator but not as a domain administrator. This user is also assigned to BPC SysAdmin User, BPC AdminUser and BPC User. During the installation process I was asked to enter the SystemAdmin User ID. First I typed in companyUSER1 and other local Administrators but I always got a failure notice saying that this was not an Administrator. Although I tried to use our super-administrator (Domain Administrator and local Administrator) it didn´t work either.
Does anyone have an idea of the mistake I made or maybe had the same problem and can provide solutions?
Thanks for your help.
Markus

Hi Markus,
the sysadmin does not need domain admin rights. So th eproblems is elsewhere.
is that account directly a member of the local Administrators group? Or is is a local admin through other groups (like it's a member of GroupXYZ and GroupXYZ is a member of the local Administrators group).
I believe that the BPC installer checks for direct membership in the group, rather than for effective rights.
Best regards
Bruno

Similar Messages

Can't install itunes due to a problem with windows installer package

hello there i can't install itunes due to a problem with the windows installer package i found a page on this site (here is the link) http://docs.info.apple.com/article.html?artnum=304405 i done every thing on it and i still haven't been able to fix the problem i have tryed the following unstalling itunes deleteing the registry keys deleteing all the temp files disableing all anit-virus software and anit-spyware. runing cc clearner downloading a new installer for itunes and windows installer and the script thing. and trying to reinstall. nothing seems to work i don't know what else to do this is the error message i get when i try to install i tunes. "there is a problem with this windows installer package.
A program required for thsi install to complete could not be run.
Contact your suupport personnel or package vendor."
Please Help i would be most greatfull for any advise given
Message was edited by: Joe_TLC

I pulled my brains out trying to figure this bug out and I may have a solution for you.
All of it installed fine in my desktop, but a friend's laptop got the error you mentioned on quicktime, itunes, flash, officeXP and about anything else I tried to load for him.
If you look in: C:\documents and settings\<username>\Local Settings\Temp there will be an iTunes install log...open it in Notepad and see if it isn't exiting with a 1619 error while running msiexec.exe
If this is the case, this fix should work for you.
Seems some configurations of XP (and possibly Vista) aren't allowing full administrator rights to the account you set up when you installed XP (even though User Editor says you do have those rights.)
I read 2 MS articles and turned off simple file sharing, then gave ownership of the entire C: drive to the administrator. Logged the admin account off, logged his "admin" account in, and then gave rights to his personal directory to his account (c:\docs and settings\<username>)
Once I did that, every install that had previously errored out performed flawlessly.
The MS articles in question:
http://support.microsoft.com/?kbid=316309 (1619 error)
and
http://support.microsoft.com/?kbid=308419 (how to set special permissions)
Hope this helps!
Doc

Cant install itunes - "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run."

Can't install itunes - "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run."
Using Windows 7

Hi Acedrvr48,
I found an article that explains steps to take if you are having trouble installing iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
I hope this helps!
- Ari

When installed JDK but I have problem with System vars may install bundle

When installed JDK but I have problem with System vars may install bundle [netbeans&JDK] WITHOUT UNISTALLING initial JDK or needed uninstall first ?

With the word 'automatically', yes you do need pulseaudio. I'm sure you could cook up some udev or related rule to do that in Alsa, but pulseaudio would be easier.

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
marek

Sql Devloper 4.0.0.13 - problems with displaying user data types

Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
        ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
         1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
Omer

I tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija        DPTY_ADRESA,
id    number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1    HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')

Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!

well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

Problem with both user and cmos password

I have problem with my user and cmos password, can formating clear the passward with remove the cmos battary.

It depends on the model. Formatting will not touch the BIOS or power on passwords but will take away the Windows user password and allow you to have a different one, but will kill all the data on the machine. Removing the CMOS battery might clear the BIOS password and power on password, but on most current laptops even that will not help. The BIOS data is on a chip that holds its contents even when all power is removed.

Can't install Safari 4...problem with windows installer?

I recently tried updating my Safari browser to v4 but I keep getting the "There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor".
I came across this thread that offers a solution (http://discussions.apple.com/message.jspa?messageID=9580878#9580878 ), however, I don't know how to edit the registry keys by deleting all "applesoftwareupdate" associated keys as the solution suggests. I wouldn't like to mess up my PC by deleting the wrong keys!
Any help in the stepwise process of deleting these keys?

Have you tried this?
Start => Control Panel => Add or Remove Programs => Apple Software Update => Change => Repair

I recently downloaded and installed Lightroom 5.7.1 problems with Flickr plug-in.

I recently downloaded and installed lightroom 5.7.1 and am having numerous problems with the Flickr plug-in. All Videos uploads creating error messages. Many photo uploads creating error messages. Something about API error. Also, my photo count after is different within the app then it is on Flickr website.

It really isn't clear what you are asking. If you are looking for the profiles for your cameras you would go to the calibration tab in the develop module and click to choose from different profiles. Profiles will only be available for raw files, including DNG files.

Installing PE 9 -I encounter problem with "MSXML"

I'm trying to install PE9 using Windows XP. I get a message that the system encountered a problem with MSXML and cannot install. What do I do? (I'm technilly challenged)

Hi,
It would be great if you can give us following log files in order to debug this issue.
1) Pre9.log
2) MSXML.log
Location: - Go to Start Menu -> Run-> %temp%
Also, please let us know if any other version of MSXML is installed on your system before installing Premiere Elements.
Thanks,
Gaurav

What to do when I cannot install Firefox 6.0.2, problems with permissions?

I'm trying now to install Firefox 6.0.2 to my laptop. Asus x70IJ with Win7 64bit. I cannot get installation trough.
I receive pop-up with text "You may not have the necessary permissions to use all the features of the program you are about to run. You may run this program as a different user or continue to run the program as the current user". I have only one User and definetely have all permissions in this account. There is two choises to run it current user, or as the following.. Administrator is there, but does not aprove my password. And installation end with current user.

Thanks for sharing the solution with me! For me "run as the administrator" for the installation package was the way to fix it.

10.9.3 = major problem with fast user switching

I've found a major problem with the 10.9.3 update with my 27" iMac, you probably won't see it if your on a laptop. I did all the updates in past few days i.e., 10.9.3 combo update, iTunes 11.2.1.
Afterward I noticed a bug when Fast User Switching i.e. FUS. I have 5 accounts but the bug can be replicated with only 2.
I login to userA have some windows open but you can just open a Finder window. Now make the window at least half the with of the screen and move it to the right side of the screen. Then login in to userB and setup the windows the same way as userA. Now FUS to userA and then back to userB. You will notice that the Finder window has been moved to the upper left corner of the screen. This problem happened's to all user accounts you login to except the first account you logged into.
Since I didn't know what update caused the problem I had to use Time Machine to revert to my last version of 10.9.2. I then double checked the for the bug and sure enough everything was working fine. I now was going to install one update at a time and to see which one was causing the bug. So I installed 10.9.3 first and found the bug immediately.
I now know what's happening. When the switch occurs the screen is resized to about the equivalent of a 13" MBP. At this point the windows that fall some ware outside that size get moved to the upper left corner and resized. Then the screen resizes to normal but it's too late, all the window have moved and been resized to fit the 13" screen size.
You can reproduce this effect by going to System Preferences and selecting Display and then select the Scaled radio button. No select the smallest size, say, 1280 x 720. Now select the Best for display radio button again. You will now see all the windows you have open that were too big no moved and resized to the upper left corner. I know why the Mac moves the windows, it's so you don't have any windows stuck off screen.
Now when I say 13" it could be some other size but it's about that size give or take.

Yes, it's when you user Fast User Switching.
Here's snapshot before the screen resized. Ignore the window in the lower right, I moved it from the upper left before taking the screen shot.
I hate to say it but I'm glad I'm not the only one with this bug.

Installing BPC NW 7.0 - Problem with SystemAdmin User ID

Similar Messages

Maybe you are looking for