Installing Data Guard Manager

Hi Everyone,
Regarding Data Guard Manager, I dont have any idea. Does it come with OEM or do i have install it separately.
Thanks in advance

Yes your right DataGuard Broker, but i want to try with the (GUI ) Data Guard Manager. But in OEM in Oracle 9i I dont see any option named DataGuard Manager
Can you give me some idea.
Thanks in advance

Similar Messages

Data Guard Manager GUI does not respond

Hello,
I configured a standby datase environment using the Data Guard(9.0.1). Both, the primary and standby are 9.0.1
Few days ago, the standby crashed and i was getting an Ora-12500 error. To solve that error i had to recreate the oracle instance. After that, the primary established connection to the standby and shipped the logs which were applied by the stand. But when i connect to the Data Guard Manager GUI and click on my data guard configuration, the cursor shows up and keep running on the screen indicating that the DGMGUI is working on the background. I left DGMGUI running overnigth but it did not finished. I don't know what is the problem. Any hint ?
Thanks a lot.
Hardy.

You probably want to post this in the General Database forum.
Thanks.

Oracle 9i Data Guard Manager

Hi experts,
Does Oracle 9i Data Guard Manager software comes with oracle Enterprise edition.
Please tell from where to get this software
Thanks

hi,
Yes it does. You can access it from the command line with the utility dgmgrl.
rgds
alan

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

Can't install Data Guard using DBCA in Oracle 11g Release 2

I have installed Oracle database 11g Release 2 successfully. I have installed Label Security using DBCA, now when I am installing Database Vault using DBCA, it gives message "ORA-01017: invalid username/password; logon denied" and exists back to DBCA.
What step I am missing? please suggest.
Regards and thx,

Hi,
I had the same issue too. I installed it on my desktop (server class option). Everything else including EM is working fine. However I got around the issue to an extent by manually running the catalog scripts for database vault. It should be located under $ORACLE_HOME/rdbms/admin. You have to run the script catmac.sql. There is a catch though. You need to go through the contents of the script and execute the other scripts manually by supplying username and passwords (yes, it sucks!!) but I don't find any help on metalink for this issue.
Currently I am trying to create the realms but I am denied permission due to lack of "OPERATOR TARGET" privileges.
If someone can lead me to the correct place where I can look for what is missing, it would be great.
Thank you
Kumar Ramalingam

Data guard broker/manager

Good day,
My Oracle 9i do not have Data Guard Manager option in OEM console, seems it is not installed with Data Guard Broker.
Kindly guide how can I install it.
Regards
Anshuman

Thanx,
I will try to use commandline. but still any clue how can i install the graphical interface in oracle 9i or it is not availabe at all?
Regards
Message was edited by:
AnshTyagi

OS and DB upgrades to databases under data guard

Hello,
Here is the scenario. I have an OPS db and a physical standby of OPS. Platform is solaris 9 with both a 9i instance and a 10g instance. I want to be able to do a switchover of the ops to the standby and then upgrade the standby. I believe that I can upgrade the OS to solaris 10 with no problems. However, I also want to be able to upgrade the 9i instance to 10gR2. Is it possible to do an upgrade of this degree to a standby under data guard? At the point that the db upgrade has completed data guard will no longer have the same configuration. This scenario is starting to send off alarms to me. Thanks in advance for your responses.

Hi,
Is it possible to do an upgrade of this degree to a standby under data guard? Yes. Steve Karam does it all the time, and he has these notes:
"Dataguard's physical backups are a GREAT DR situation for a failed upgrade. You will have an exact physical copy of your database ready to switchover to if anything goes wrong with the upgrade. Basically you switch your final archive log and shut down your primary, then begin the standard upgrade.
If something goes wrong, you can perform a failover on your standby server and you're back up with no possibility of inconsistencies since it's a physical backup. In my opinion, the only method better than DataGuard for a backup for upgrade scenario would be to use SAN tools like NetApp's snapMirror or Sun's
Availability Suite in order to back it up; these tools can snapshot a DB in a matter of seconds and are good for this sort of situation: if the upgrade goes wrong, simply restore the snapshot.
If you do it right, you can set up dataguard with only 5 minutes of downtime, then perform your database upgrade with only 5 minutes of downtime. I have done this method for clients in the past and they have been very happy with the results."
Bipul Kumar has a book devoted to using Data Guard, that you may find helpful, and he notes the steps for a Data Guard-based upgrade:
http://www.rampant-books.com/book_2004_2_dataguard.htm
"Upgrading to Oracle10g database software in a Data Guard environment involves the following activities:
If the Data Guard configuration is managed by Data Guard broker, the broker configuration needs to be removed using the existing version of database software. In other words, remove the Oracle9i configuration before upgrading to Oracle10g. Execute the following command after connecting to any site in the configuration using DGMGRL to remove the configuration:
REMOVE CONFIGURATION;
Install Oracle10g database software. The Data Guard feature is not available with the Standard edition, so the Enterprise edition must be installed. Additionally, install Oracle Enterprise Manager (OEM) 10.1 in order to manage the configuration using Data Guard Manager GUI interface, which is tightly integrated with OEM.
The primary and standby databases should be upgraded to Oracle10g. The log management services should be stopped during the primary database upgrade. All of the redo logs generated during the database upgrade should be applied manually on each standby database. For more information on upgrading to Oracle10g, refer to the documentation, “Oracle Database Upgrade Guide 10g Release 1(10.1)”.
Update the initialization parameter files or server parameter files on the primary database and all the standby databases to include the parameter db_unique_name. The database unique name must be identical on all the databases in a configuration.
Once all the databases in the Data Guard configuration are upgraded to Oracle10g, the broker configuration file will have to be created in order to manage it using Data Guard broker. Execute the following command, connecting to the primary database using DGMGRL, to recreate the broker configuration file and to add standby databases"
Also, see the docs, with their instructions:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/upgrades.htm
Hope this helps. . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference":
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm

Problem with data guard Creating a Physical Standby Database turorial

There is a tutorial of Creating a data guard Physical Standby Database:
http://www.oracle.com/technology/obe/11gr1_db/ha/dataguard/physstby/physstdby.htm
I tried to install it on two servers. One for primary database second for physical standby.
I have error on C. Creating the standby database over the network, action #6:
"On the standby system, set the ORACLE_SID environment variable to your <physical standby SID> (i.e. orclsby1) and start the instance in NOMOUNT mode with the text initialization parameter file."
When I try to connect to idle instance there is an error pops up:
C:\>sqlplus / as sysdba
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 21 16:28:10 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
I'v checked listener and it is runned. There is no service for database because there is no database yet.
The question is did some one installed data guard configuration using this tutorial? Is there any errors in it? What should I do to finish this installation?

On Windhose for every instance a service must have been created using the oradim command.
Oracle tutorials are usually Unix-centric, as Windhose is an odd man out, so they don't discuss that bit.
'Kindly do the needful' and create the service prior to starting the instance in nomount mode
Hint: oradim is documented and has a help=y clause.
IIRC there is an option in database control (in the maintenance part) which automates everything.
Sybrand Bakker
Senior Oracle DBA
Experts: those who do read documentation

Data Protection Manager Client

Hello collegues,
is there an option to install Data Protection Manager Client (not the agent itself) for DPM 2012/2012 R2? We need an option for clients to backup/restore their's data on demand with GUI interface. I saw such an application in DPM 2010, but can't
see it in 2012 options fo installation.
Regards

Hi,
Please see the below links that may assist you.
https://technet.microsoft.com/en-us/library/jj628055.aspx
Note if needed:
The administrator of a client computer must set the name of non-admin users who have to have permissions to perform end-user recovery of protected data of a client computer. You only need to add the registry entries on
the client machines same as on DPM 2010. The DPM 2012 DPMRA Agent should still honor the keys.
To do this, the administrator must add the following registry key and value for each of these non-admin users. This is single key that contains a comma-separated
list of client users. You do not have to add this key separately for each non-admin user.
Registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection
REG_SZ: ClientOwners
Value: Names of non-admin users. This should be a comma-separated list of user names without any leading or trailing spaces, as in the following example: domain1\user1,domain1\user2,domain1\user3 (and so on)
Following blog provides detailed steps to configure DPM recovery permissions for users that are not members of the local administrators
group:
http://blogs.technet.com/b/dpm/archive/2011/05/10/how-to-configure-the-dpm-client-to-allow-non-admin-users-to-perform-end-user-recovery-of-dpm-protected-data.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to
other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

Data Guard - How?

Hi!
What I need to install Data Guard? I read, I need OEM Grid Control too. On download page there are 3 zips! This is more than database software! Am I right? Generally I'm looking for nice "step by step" tutorial for Data Guard.
And License question: Now, I'm using downloable software from Oracle, but later I will use CDs from my customer: 10gR2 EE. Is this version enough?
Thanx,
Jacek

And License question: Now, I'm using downloable software from Oracle, but later I will
use CDs from my customer: 10gR2 EE. Is this version enough?There is no (none, nada, zero, zilch) diffference between the downloaded version and the CD version if the version number is the same.
Long ago, Oracle separated the software from the license. Some consideration:
a) Software
- [Most] Oracle software is free;
- All Oracle software is used under specific license;
b) License
- The license defines the 'right to use' conditions of using the software;
- Some forms of license require associated payment;
Patches
- In this discussion (ie. in my definition), patches are not considered software;
- Patches require paid support;
- Paid support can only be attached to specific 'right to use' licenses (usually for-fee licenses);
And finally, Oracle reserves the right to audit you (and your customers) to make sure you have the correct license for your use.
By the way - Data Guard is part of the database and does not require anything from Grid Control. Go to this page to get help: http://www.oracle.com/technology/deploy/availability/htdocs/DataGuardOverview.html

Can anyone tell me about Oracle Data Governance Manager??? How to proceed with it???

Hai all,
We are planning to implement Oracle Customer hub for Oracle Master Data Management.Please read the following link and tell me how to work on Oracle Data Governance Manager.
Where can i find it???
What are the steps involved in the implementation????
http://www.oracle.com/us/products/applications/master-data-management/oracle-customer-hub-439838.pdf

Hi Nandini,
DGM Software build can be downloaded from My Oracle Support via the "Patches and Updates" tab with patch number/name 9329831 (currently password protected; please log a service request and request a password).
DGM Installation:For information about how to install DGM are documented in siebel Maintenance Release Guide Version 8.1.1.x, Rev. O, Section: Installing Data Governance Management (DGM).
Steps to Customize the Data Governance Management (DGM) application (Doc ID 1323952.1)
Document provides steps to customize the DGM application, making it easier to change the skin via CSS stylesheet changes in the OOTB DGM application.
Reference: Oracle Master Data Management - Customer Hub (Siebel UCM) Information Center - Install Lifecycle (Doc ID 1081980.1) .
Thanks,
Shilpi

How to configure Enterprise Manager in Active Data Guard?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
Question: How to configure Enterprise Manager in Active Data Guard?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

10g Data Guard Install Questions... Solaris 9

Firstly, I've done several Failsafe installes on Wintel platforms, but I'm having a tough time getting started installing Dataguard on Solaris. According to the manual:
Oracle® Data Guard Broker
10g Release 1 (10.1)
Part Number B10822-01
"The Oracle Data Guard graphical user interface (GUI), which you can use to manage broker configurations, is installed with the Oracle Enterprise Manager software."
I don't see any link or otherwise access to Data Guard via the 10g Enterprise Manager. Is there something that I missed during install that will allow me access Data Guard GUI?
I'm stuck
http://download-east.oracle.com/docs/cd/B14117_01/server.101/b10822/concepts.htm#sthref14

rajeysh wrote:
refer the link:- hope this will help you.
http://blogs.oracle.com/AlejandroVargas/gems/DataGuardBrokerandobserverst.pdf
http://oracleinstance.blogspot.com/2010/01/configuration-of-10g-data-guard-broker.html
http://gjilevski.wordpress.com/2010/03/06/configuring-10g-data-guard-broker-and-observer-for-failover-and-switchover/
Good luck.
SQL> show parameter broker
NAME                                 TYPE        VALUE
dg_broker_config_file1               string      /u03/KMC/db/tech_st/10.2.0/dbs
                                                 /dr1KMC_PROD.dat
dg_broker_config_file2               string      /u03/KMC/db/tech_st/10.2.0/dbs
                                                 /dr2KMC_PROD.dat
dg_broker_start                      boolean     FALSE
SQL>so i need only:
ALTER SYSTEM SET DG_BROKER_START=true scope=both;only to act in dgmgrl.
please confirm me ......

Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager

I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.

Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points

VssNullProver stopped after installing Update Rollup 3 for System Center Data Protection Manager 2012 R2

I recently installed Update Rollup 3 for System Center Data Protection Manager 2012 R2.
As part of the update I updated all DPM Agents, including the ones on our Hyper-V Servers (which are part of a cluster). I also rebooted every DPM Protected Servers. After reboot all Hyper-V Servers raise a warning that the VssNullProvider service has stopped.
Backup seems to work properly. I can start the VssNullProvider service manually. But after the next backup the service it is stopped again. Exactly the same issue occurs on our test Hyper-V Cluster. All our Hyper-V Servers run Windows Server 2012 R2 and
we use System Center Virtual Machine Manager 2012 R2.
Something is not ok with Update Rollup 3. Any suggestions?
Boudewijn Plomp, BPMi Infrastructure & Security
Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

Hi
SEE NEW BLOG:
Support Tip Service Manager alert for the VSSNullProvider service after installing
DPM 2012 R2 UR3
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
Thanks!
Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

Installing Data Guard Manager

Similar Messages

Maybe you are looking for