Installing Dirsync on Windows 2008 Server Standard FE

Hello all,
I need to Dirsync my only domain controller i have to Office 365. My server is a Windows 2008 Server Standard FE. I installed all requirement for dirsync to be installed (and all Windows updates also) and i still get an error when trying to install
(Says my Powershell is not at least 2.0, but it is...)
Anyone tried to install Dirsync on that kind of server ? (and made it work?)
Regards,

It is
required to update to Windows Management Framework 3.0 or Powershell 3.0 if you are installing DirSync on Windows 2008 R2. I believe the same applies to 2008 SP1 as well.
Also, I've heard of issues where non-English versions don't properly detect the presence of PowerShell. You may want to temporarily change your regional format to English to test this, if this applies to you.
Mike Crowley | MVP
My Blog --
Planet Technologies

Similar Messages

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

LMS 4.0 eval on 180-day Windows 2008 Server Standard R2 SP1 eval

I'm having difficulties installing the LMS 4.0 eval on an 64-bit 180-day Windows 2008 Server Standard R2 SP1 eval.
The installer says that it needs 2008 Server Enterprise, but the LMS 4 release notes say 2008 Server Standard works. It also says that R1 is supported, but makes no specific reference to R2. I'm assuming that if R1 is supported, R2 would be supported as well, no?

You need to install a patch for this OS support:
http://www.cisco.com/cisco/software/cart.html?imageGuId=DB56D2FEE377F4846A9F42F81C48EAC18C2C9967&i=rs
CiscoWorks_LMS_4.0.x_WIN2K8_R2.exe
Make sure you follow the install instructions in the readme

Unable to Install OBIEE on Windows 2008 Server R2

I am Unable to Install OBIEE on Windows 2008 Server R2. It is giving the error
Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
But is there any patch to install the OBIEE on Windows 2008 Server R2

Hi Sk
I think it might be due to compatible issue.So check the properties of the install.exe file and change the compatability to windowsxp or windows 2003 ,then try to install .I think its going to work.Because i installed OBIEE10.1.3.4 on windows server 2008.
Regards
Sandy

Windows 2008 Server Standard - Problems Printing

I have an issue with a server that we are currently setting up in a bus station.
There are 6 machines in total, one is the server which is running Windows Server 2008 Standard 32bit SP2, the other 5 are the client machines which are all running Windows 7 Pro 64bit SP1.
All 6 machines are all linked together on the same domain and they all speak to each other, i.e all ping each other.
The issue we now have is that we have 5 printers to link to the network, all the prints are plugged directly into the Ethernet sockets on the wall which then go to the switch. The prints all have ips assigned to them and the server will see them but will
not communicate with them. If we try to ping any of the printers it fails.
We have loaded print service/print management on the server and we can set up the printers through that. Again we get the error that it is not communicating with the printer so it asks you to load the driver manually(gives us a huge lists of makes and models).
In the network list through control panel we dont get a list of printers.
If anyone can help that would be great and could let us know what we are doing wrong.
If i have missed anything important out please let me know.
thanks

Until you determine the underlying network transport problem this has nothing to do with printing.
Get the network configured so you can ping or use tracert to the IP of the device. It's possible the printers are not properly configured for your network but once again not a printing issue at this point but a networking issue.
Alan Morris Windows Printing Team

Can Creatrive Cloud apps be installed on a Windows 2008 server?

Hi,
Currently a very limited number of ours users (3-5) have access to Adobe applications as Illustrator, InDesign, PhotoShop and Premiere).These are installed on a local pc.
In the near future we will start using a VDI Windows Desktop that does not allow an\y software installations.
Additional apps shoudl be installed in a server environment (Windows Server 2008 and Windows Server 2012). Does this work woith Adobe Creative cloud?
I tried installing our standalone InDesign license on a server, bbut this doesb't work.
Thanks
Erwin

Hi There,
Kindly check the System requirements | Creative Cloud
Thanks,
Atul Saini

Installing Catalyest on Windows 2008 server

i am really tierd of keep trying installing and cleaning my system from previous instalation
of catalyest ... after i inter the serial number i got that error and instalation stops
pleaaaaaaaaaz help and if there is any link that i can download the latest updates or latest build of the catalyest
as flash builder inghtliy build plz also tel me
thanks

Hello,
Can you please lookup the log for your installer and email it to me? You can find the logs in:
[Drive]\Program Files\Common Files\Adobe\Installers\
You'll want the most recently dated one.
PM me for my email address.
-Bear

Windows 2008 Server on Sunfire V20z Server

I am looking to install Windows 2008 Server (Standard Edition) on a retired Sunfire V20z server. The box is totally raw - i.e. new drives with no OS. The problem is that the Win2008 install disc is a DVD and the V20z only has a CD-ROM drive. I purchased an external DVD USB drive, but the BIOS does not support booting from the USB. I'm thinking updating the BIOS to version 1.35.3.2, but I can't find any documentation that it even supports USB booting.
Anyone have any ideas on how I can install Win2008 server on this raw box?

Depending on what other resources you have to hand I'd use one of the following approaches. Note: I don't have a V20z but the following approach has worked on other machines which had no DVD drive.
Open the box and temporarily connect a slimline IDE DVD-ROM in lieu of the built in CDROM. I've found that while there is often a proprietary interface on the M/B the connection at the drive end can normally be dismantled and connected to another drive. I use one salvaged from an IBM P3 based Netvista.
or
Download the Microsoft WAIK and generate a Windows PE CDROM. Insert that into the CD drive and place the Windows 2008 DVD in the USB DVD drive. Boot the machine from the CD and then launch the Windows setup program from the USB DVD. The process for creating the Windows PE CDROM is straightforward and is covered in the Windows PE User's Guide as provided in the WAIK but here are the steps.
Launch the Deployment Tools Command Prompt and run the following commands ( for amd64 )
copype amd64 C:\winpe_amd64
copy c:\winpe_amd64\winpe.wim c:\winpe_amd64\ISO\sources\boot.wim
oscdimg -n -bC:\winpe_amd64\etfsboot.com C:\winpe_amd64\ISO C:\winpe_amd64\winpe_amd64.iso
Burn the resulting ISO to a CD.

Does Windows 2008 Server run ok under Mac Mini Bootcamp?

Does anyone have any experience of installing and running Windows 2008 Server on a Mac Mini (of which has either Mac OS or Mac OS Server installed), under Bootcamp?
I currently have an old Dell with Windows 2008 server which acts as my Domain Controller, Exchange Server for a small home-office network. It's due an upgrade as the hardware is so old (and noisy!) and like the idea of having a nice compact, quiet Mac Mini, but want to make sure it can carry out the same duties under bootcamp on Win2008?

Windows 2008 can be installed in Boot Camp. However I don't believe it is officially supported by Apple so there may or may not be issues with installing the Boot Camp Drivers (or future updates to the Boot Camp drivers.) Not something I'd be recommending for a "production" environment. If this is a test/dev system, then probably worth trying, depending on how critical your network uptime is.
Also, you didn't mention if your Dell came with Windows 2008 preinstalled, but if it did, then likely it has a "branded" version of Windows that won't activate correctly on non-Dell hardware. (If your Windows disks have "Dell" on them, they won't work with the Mac.) So you may need to purchase a retail or volume license copy of Windows 2008.
In general, for a server running as a DC & Exchange, you'd want RAID1 as a minimum so that would be the Mac Mini Server, not the "desktop" Mac Mini. Unless you have one lying around, you're looking at something around $1500-$2000 to start, depending on whether you can transfer your existing Windows 2008 & Exchange installations. (Another $500-$2000 depending on what vesions of Windows & Exchange.) And probably 8GB of RAM since Windows 2008 & Exchange on 4GB is pushing it. Considering the costs, I suggest you look at the Dell T110 series or the HP Proliant 110 series. Both lines are very quiet and are supported for Windows 2008 from the factory, including Windows Small Business Server, which includes Exchange. While not as small as a Mac Mini, they are mini towers and about the size of a typical PC desktop.
If you really wanted a small footprint, then HP has a "microserver" series. You'd probably need to call HP to get the build you want as the online ordering is limited for that model. From Dell, there is the Zino model desktop. Again, not supported for a "server", but you were going to consider a the non-server version of the Mac Mini, then the Zino has at least a chance of you reusing your existing versions of Windows if they're Dell branded, thus saving your something in the range of $500-$2000 for new software. (But I would NOT recommend a non-server chassis without RAID1 hard drives, so the Zino is not my choice. I just offer it as a possibility if you accept the risk of an unsupported installation, as would have been installing Windows 2008 in Boot Camp.)
So yes, it will work. But I wouldn't recommend it for a production environment, especailly if you have the "desktop" computer without RAID1.

How to install a plugin on 64 bits windows 2008 server?

From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Windows 2008 Server R2 - Service Pack 1 Failed to install

A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64. The update failed to install after 3 attempts using the Windows Update manager. After the third time I checked the system properties which states that SP1 is
installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully.
In update history it shows the 3 failed attempts with no successes. This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
to see if this corrects my issue. By the way what triggered the install of SP1 is random reboots of my server. This is that unknown Kernal Power Error which I have yet to resolve. Some months my server randomly reboots one time and other
months 4-5x. That is neither here nor there, the point of this discussion is to resolve SP1.
I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates. So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error      Windows Update
An error has occurred. Not all of the updates were successfully uninstalled.
When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup            Windows Update Standalone Installer
Installer encountered an error: 0x80073712       The component store has been corrupted.
Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
exact same results.
It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation. Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
If anyone has any suggestions please chime in and let me know what I can try. Thanks for all the support and hopefully this post will help others in the future.

Maybe a little bit late, but I was running almost same problem on a exchange server.
Scenario:
First attempt to Update the windows patches - excluded the patches from the last 2 months.
I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
So the C:\ partition had less then 5 GB free disk space, and I started the updates.
All went well until Windows SP1 begun running to downloading and installing.
When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
What was the trick:
1) Stop the windows Update Service
2) C:\Windows\SoftwareDistribution\DataStore - Delete content
3) C:\Windows\SoftwareDistribution\Download - Delete content
4) Windows update Service check if its runs again
5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
I tought it will be hopefull for others to respond to this article with a solution.
Kind regards,
Alexander Tjintjelaar
Micky soft noob

Install windows 2008 server r2 as a vm on windows 8.1 pro

I am trying to install windows 2008 server r2 as a vm on an asus I7 4th gen. on windows 8 pro. It goes
thru the install untill completing install and gives error the computer restarted unexpectedly or encountered an unxpexted error windows installation cannot proceed click ok to restart. I do the shift f10 and change the registery to force finsh the install.
It boots up but when I try to do anything. It goes into netio.sys BSOD issue

I haven't run into that problem, but when setting up the OS, just
remove the NIC from the settings, do the install, make sure it's running, then install the integration
services, reboot, then add the NIC back in.
You could also use a legacy network adapter if that doesn't work.
In any case I'm trying an install of Win2008R2 right now so I can see if I get the same problem...
Bob Comer Microsoft MVP -- Hyper-V

OBIEE install problem on Windows 2008 R2 64bit server

Hi!
I have for 1 month struggled with a OBIEE 11g install on a Windows 2008 R2 64 bit server. (I have a open SR at Oracle but have not got any answer/suggestion for 2 weeks)
I follow these documentations:
Oracle® Fusion Middleware
Installation Guide for Oracle Business Intelligence
11g Release 1 (11.1.1)
E10539-01
and
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CIHDJGIH
Specially chapter 4.4.4 for the moment, cant get pass step "Specify Installation Location"
First did I run RCU against our Oracle 11g database and created the schemas for BI Publisher
Then did I install JRockIT - jrockit-jdk1.6.0_26-R28.1.4-4.0.1-windows-x64.exe
Then from JRockIT installed WLS_1035 generic.
Then configure AdminServer so thatone is up and running (even installed a HTML server from E1 to check if WLS is up and running and working)
Then start the installer (Oracle Business Intelligence, v. 11.1.1.5.0, for Microsoft Windows x86-64-bit) disk 1, setup.exe, then must I choose "software only" install. But on step 3 och 9 can I not press next, the installer says that I do not have any "Application Server" running. I have installed on E:\Oracle\Middleware but the installer can not see any application there, but I can access it thru a browser.
Tests I have done,
Install loopback adapter
Deinstall loopback
Deactivated everything but IPV4 protocoll (we have also IPV6 on all server).
Verified that we have static ip on the server
Tried installer for BIP (OBIEE) with WLS AdminServer running and without have it running.
And checked the installer logs everytime, no errors, no warning.
Is there anyone how can guide me or give some tips? I am getting frustrated after 4 weeks without success.
Best regards,
Anders

Hi!
It is the installer who not working properly, when using the "Browse", I had to choose a comletly wrong place first, and then again choose the correct installation path, after that would the understand where I wanted to install.
Best regards,
Anders

How to install EBS 11.5.10.2 on windows 2008 Server

Hi All,
I need to install 11i (11.5.10.2) on a windows 2008 server sp2 machine. I'm using perl 5.8.9 but running perl adautostg.pl returns this error:
Perl lib version (v5.6.1) doesn't match executable version (v5.8.9) at c:\oracle\VIS\apps\tech_st\10.1.2\perl\5.6.1\lib\
MSWin32-x86/Config.pm line 21.
Compilation failed in require at adautostg.pl line 43.
BEGIN failed--compilation aborted at adautostg.pl line 43.
The documentation says:
You must have perl 5.0053 or higher installed...
What am I missing here?
Thanks,
Konrad
Edited by: Konrad on 15.12.2010 17:11

See note 986762.1 General Notes For E-Business Suite Release 11i
Installation.
* For 11i new installations: Using the Rapid Install, install all tiers (including the database tier) on a Supported Applications Platform. Then, migrate the database to the "Split Configuration Database Tier" platform.
9iR2 database to an Itanium or x86-64 database server, review "Using Oracle E-Business Suite with a Split Configuration Database Tier on Oracle 9i Release 2", Metalink Document 304489.1.
login to support.oracle.com
Oracle Application Install 11.5.10.2 (11i) Microsoft Windows (32-bit) 2008Oracle Server - Enterprise Edition / 11gR2 Certified
select cerification tab--> Oracle E-Business Suit --> Application Technology -->Lifecycle Managemement
All Products > Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install
Then select
All Platform/Versions > Microsoft Windows (32-bit)
All Release/Versions > 11i (Application Install)
All Platform/Versions > Microsoft Windows (32-bit) > 2008
you can find all certifications.

CF9 install on Windows 2008 Server R2

Hi everyone I've installed Cold Fusion 9 on my windows 2008 Server r2 box and everything appears to be configured correctly becuase I can get to the Cold Fusion 9 Administrator page just fine. I've looked within IIS 7.5 and it's recognizing the .cfm file I think becuase it's an option under default documents. However I try to view the file from the local host I get a error 500.0.
Module
IsapiModule
Notification
ExecuteRequestHandler
Handler
AboMapperCustom-77246
Error Code
0x800700c1
I have no idea what that mapper is or what it's supposed to do so if anyone could help me out I would be eternally grateful! Why oh why couldnt cold fusion 9 have native IIS support in it.
UPDATE
Apparently this error 500.0 gets applied to all my sites within IIS 7.5. Not just the one I intend to use .cfm files on. When I go into the web configuration tool and remove the configured webservers and restart everything goes back to normal but the .cfm files throw a 404.3 not found error for the following module.
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032

Hi
Windows Server Core edition is not listed as supported platform:
http://www.adobe.com/products/coldfusion/systemreqs/
HTH, Carl.

Installing Dirsync on Windows 2008 Server Standard FE

Similar Messages

Maybe you are looking for