Installing Final Cut Studio Now Safari doesn't show QT

I just installed Final Cut Studio on my Macbook running 10.4.7 which installs version 7.1.2 of quicktime pro. But now Safari won't play any quicktime movies though my Firefox and Flock browsers will play QTmovies. I'd download and reinstall quicktime normally but Final Cut Studio doesn't give me a serial number for QTPro so I suspect that if I reinstall quicktime I'll wind up with no more quicktime pro or at the minimum I'd have to uninstall Final Cut Studio and reinstall to get QTPro and might be back in the same loop
Anyone have any experience with this or think of a way around getting Safari to show quicktime movies?

But now Safari won't play any quicktime movies though my Firefox and Flock browsers will play QTmovies.< </div>
You might try the Quicktime forum here on apple.com. All I can tell you is that yours is the first post I can recall describing this particular issue with an installation of FCP.
I'd download and reinstall quicktime normally but Final Cut Studio doesn't give me a serial number for QTPro so I suspect that if I reinstall quicktime I'll wind up with no more quicktime pro or at the minimum I'd have to uninstall Final Cut Studio and reinstall to get QTPro and might be back in the same loop< </div>
Your Pro license is part of the FCP install now so it will be still be there, it's not associated with the QTPlayer any longer.
You can force a reload of earlier versions of QT by going to your Library and searching for receipts for QT updates. Delete them and Software Update will pull down a new update file for you.
Umm, on second thought, wait for a few more hours till some other folks respond to your inquiry.
bogiesan

Similar Messages

  • I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    I am using a macpro 12 core computer
    I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    You can have them both on the same computer as I and many others have done for years.
    Just go ahead and install FCS 3 normally.
    There will be absolutely no problems.

  • Can't install Final Cut Studio 2 because "PowerPC applications are no longer supported"

    Bought a brand new 15" MacBookPro OS X 10.7 2.2Ghz Intel Core i7 and tried to install Final Cut Studio 2. Got the error message "You can't open the application FinalCutStudio.mpkg because PowerPC applications are no longer supported." Oh no, does this mean I have to spend more money!???

    I'd like to provide an update on this situation in case anyone is in the same boat I am.
    I went to the Apple store today. I asked if I could downgrade my operating system. They said no, since it came pre-installed with Lion. I asked if Final Cut Studio 3 was compatible with Lion. They said yes, for the most part. They said there was an issue exporting video in 1080p.
    Of course, conveniently Apple is no longer selling FCS3 and the ones on Ebay I saw have gone up to more than $650 a copy. I am out $400 for stupidly buying FCS2 a few months ago, which is now useless to me. I told the Apple guy that I'm not buying FCS X until they work out all the kinks. This leaves me with this laptop that I bought for video editing with no editing software to use.
    I never thought I'd say this, but I'm actually considering getting Premiere Pro now for Apple, which is supported in Lion and is running a deal for 50% off. (http://www.adobe.com/products/creativesuite/faq.html#lion-os) If Apple doesn't start selling FCS 3 again, they are really not giving me any choice but to switch!

  • Can I install Final Cut Studio 3.0 after already having FCP X?

    I have already installed FCP X on one of my computers.  I need to install Final Cut Studio 3.0 on the same computer now. 
    When I tried to install, I get the selection screen and Final Cut is ghosted out and unavailable.
    Is there a way around this?  I know FCP X can co-exist with Final Cut Studio 3.0 if it's installed afterward, but I need to know if I can install Final Cut Studio after FCP X which I imagine is a fairly rare situation.
    I'm on Lion -- in case that matters.
    _Matt_

    I'm not positive, but I believe that FCPX installer is aware of FCS. If you intsall FCPX and FCS is already on your computer, the FCPX installer will move FCS into a folder inside Applications. I'm sure FCS installer is not aware of the existance of FCPX.
    I would guess that you would have to uninstall FCPX, install FCS and then, if you wanted, re-install FCPX, using the App Store.
    I have not actually done this, but I'm guessing that having FCPX already on your computer is what's causing issues with the FCS installer.

  • Re installing Final Cut Studio on my NEW Mac pro?

    I originally purchased Final Cut Studio (on a G5 Power PC), Then installed the universal crossgrade,
    then installed Final Cut Studio 2. Now I have a New Mac Pro (Intel Chips) How do I go about
    reinstalling FCS? do I need the original serial key from the first version or do I just use my
    FCS 2 serial Key?
    J>H<L

    J>H<L
    You'll need both keys, but you only have to do one installation.
    The FCS2 installer will ask for the FCS2 key. If that passes, another window will open asking for the FCS key. If that key passes, then it's just a normal installation.

  • Strange Window at start-up after installing Final Cut Studio 2

    After installing Final Cut Studio 2, everytime I start up I get a window with the Final Cut icon in it And the following text:
    Alert Title
    Alert: something happened
    At the bottom are two buttons:
    Cancel and OK

    I had the same thing, in my startup items was something called "alert" i deleted it... no more "nothings happened" a few people had this problem and have now solved it !
    Yay i solved something for people!
    jas

  • Help in installing Final Cut Studio 5.1 Academic

    Help! I had to uninstall old versions of Final Cut Studio.
    I now am trying to install Final Cut Studio 5.1 Academic. Installer rejects the serial number every time. I don't know what to do.
    It's a valid serial number; I have the packaging right here in front of me. It's old (purchased November 2006) but that shouldn't matter, right?
    Please help.

    Hello Brian,
    Thanks for the reply. I was able to read the disc on my Macbook Pro and I copied all of the folders on the install disc onto my flash drive. I plugged it into my iMac and it gave me the following error message: The alias "Install Final Cut Studio" could not be opened, because the original item cannot be found. Delete Alias, Fix Alias, or OK. Deleting the alias just moves the install file to the trash bin. Fixing the Alias asks me to Choose the item that you want alias to "Install Final Cut Studio" to open.
    I could not figure out what to do after this. Any clues?
    Thanks again.
    Steve

  • Cannot install Final Cut Studio on new Mac Pro

    When I go to install Final Cut Studio on my new Mac Pro, it tells me that "Final Cut Studio Installer requires that your system have a Quartz Extreme capable video card."
    I have the ATI 5870 and, just a wild guess here, I'm betting it does support Quartz Extreme.
    A software update doesn't help me here because I cannot get the software installed the first place to be able to update it. What should I do?

    FCS 1...Final Cut Pro 5.0? Won't work on an Intel. PowerPC only. You need at least 5.1...which wasn't a free upgrade, so updating won't work. You need FCP 5.1, FCP 6 or the most recent FCP 7. Those are the only versions that will work on the newer macs.
    Shane

  • Help - installing final cut studio keeps failing

    I am trying to install final cut studio - I selected all options for download, got to the part where the audio content 1 disc was asked for, at some point in that it asked for the original install disc - which I put back in, and then the installation failed.
    I attempted re-installation 3 more tomes - always failing at this point.
    Anyone experienced this or know what I should do now?
    ThankYou

    Hello
    I did as You suggested and it still fails at the same place, with the same generalised message - ie "the Installer encountered an error that caused the installation to fail".
    Can it be an issue to do with licensing? My co-worker and I work in the same organisation - he has it loaded onto his macbook pro and said it had two "usages" available, and so I would be able to do the same(the organisation owns the software). I may be a bit innocent(!) but it wouldn't suprise me if programmers embedded such checking procedures to take place during installation - and the message given in relation to it be general - like it's failed but not specifically saying why. Or am I being overly "worried"!!!

  • Kernel Panic(s) after installing Final Cut Studio

    So I've been using this Mac Pro for 10+ months.
    10G Ram, 3 internal hard drives, OSX 10.5.8.
    Been running Logic Pro and Aperture and other small apps with zero problems.
    Recently, the only change to my computer is I installed Final Cut Studio and Logic Studio Upgrade.
    Past 3 days I've gotten 2 kernel panics. (Report said something about FBD Memory?)
    (1st one, I was using Mpeg Streamclip to transcode footage.
    2nd one, I was only running Safari.)
    I repaired disk permissions, used diskwarrior, did the hardware diagnostic test thing, nothing came up.
    I asked Apple Genius but they just said reduce everything to 'base config' and troubleshoot from there.
    I wanna ask you guys, do you know of any obvious existing conflicts between the software that might be going on? Am I missing something obvious?

    Have a look at System Profiler and if you have ECC errrors on the third slot (after rendering some time), you might have the same problem like me and it's not solved yet. But you can take out the third dimm or run smcFanControl and raise the speed a little. Both helps in my case as a workaround.
    http://discussions.apple.com/thread.jspa?threadID=2018048&tstart=90

  • Just installed Final Cut Express 4 but doesn't open

    Hey I'm a dummy but....Just installed Final Cut Express 4 but doesn't open tells me I don't have the AGP graphics card,my ATI Radeon X1600?Do some imac 1.83 Intel Core Duo come with out it?I'm freek'n stuck!!Any help would be Greatly appreciated!!

    Al's suggestion should solve the problem.
    However, if you get fed up with hitting the esc key every time you open FCE you could try this permanent cure .......... it's nowhere near as frightening as it sounds and only takes a minute !
    For a permanent cure edit the info.plist like this:-
    1. Right click on the FCE icon (in Applications NOT the Dock) and select "Show Package Contents".
    2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
    3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
    4. Close the window and when asked if you want to save the changes, say yes.

  • Why Can't I Install Final Cut Studio?

    I have a MacBook Pro which is about 12 months old. It has a 2.66GHz Intel Core i7 Processor and 8G of RAM. I have been trying to install Final Cut Studio 5.1. Yeah I know that is an OLLLLLLLLLLLD version. Why I chose not to update is neither here nor there. I was about to update when Final Cut Pro X was realeaded and FCS vanished into the ether. I really only wanted DVD Pro but when that wouldn't install I went back to Square 1.
    The specificationa as stated are:- "These discs contain the files required to install Final Cut Studio 5.1 on either PPC or Intel based Mac computers."
    The error message that shows up on the screen when I click on the install package is:- "You can't open the application Final Cut Studio pro.mpkg because Power PC applucations are no longer supported."
    This is despite the stated specifications and the fact that there is a Universal Icon on the discs.
    I am also having a simillar but not the same problem with iLife '06 but i'll start another thread on that.
    I'm confused, thanks for your help in advance.

    Your problem is you are running Lion as your OS (10.7) and Lion does not support Rosetta which is required to run the INSTALLER of FCS 2. If you were running Snow Leopard, you would have been able to do the install.
    MtD

  • How can I install Final Cut Studio 2 on my new MacBook Pro with Lion?

    I just purchased and received a new 15" MacBook Pro (non-retina) last week. I need to install Final Cut Studio 2 on this computer. I have researched this and found that I need to install Rosetta from the Snow Leopard DVD in order to do this. This is the first Mac I've bought ( although I've been working with them for years), so I don't have a Snow Leopard DVD. I am a high school teacher and we use FCS 2 for my classes so buying FCP X is not a viable option for me since I teach FCP 6. The iMacs we use in school run Leopard and were never upgraded to Snow Leopard (budget cuts and all), so I can't even borrow one from my district.
    Does anyone know how I can obtain Rosetta? Or another way to install this without it?
    Thank you ! :)

    There is no way to add Rosetta support because it is not supported by OS X Lion at system level. This has been documented before the release of OS X Lion by itself.
    If you really need Final Cut Studio 2, I would return your computer if possible, and purchase a Mac that is capable of running Snow Leopard (all 2010 models, early 2011 MBP and some other 2011 models)

  • How can Install Final Cut Studio in my Mac Pro Early 2009 ??

    I have Final Cut Studio 7  NOT installed yet and Mac Pro Early 2009 with  OSX  10.9.5. I have Final Cut Pro X  Version  10.1.4 installed. Can I installed Final Cut Studio here together with  FCPX ?? Maybe not. What is the best way to install FCP Studio??
    Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ??   10.6,  10.7,  10.8, 10.9  ??
    Thanks for any help I can get
    Alberto Marban

    Here is the Best Practice Guidelines from Apple:
    Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
    MtD

  • Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

    I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

    It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
    If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
    I hope this will work for you.
    DM

Maybe you are looking for

  • Logic Studio on my new Mac Book Pro

    I had one install of my Logic Studio on my imac and one on my old Mac Book. I bought a new Mac Book Pro and gave my old one to to my daughter. I reinstall all my iMac content to my new Mac Book via Time Machine synch. When i start Logic it asked me t

  • Error 1172 trying to use mx.controls.List class

    I am trying to write code in Action Script in Flex Builder 3 but I am having trouble using some of the classes in the mx package. When I import like this: import mx.managers.PopUpManager; import mx.controls.List; import flash.display.SimpleButton; Th

  • Command object help

    Hi All, I have a report having command object like this.My back end is MYSQL. I am not getting data in designer with below query SELECT * FROM clock_time WHERE STR_TO_DATE(DATE_FORMAT(clock_time,'%d-%m-%Y %H:%i'),'%d-%m-%Y %H:%i')= DATE_FORMAT('2014-

  • BPM Modelling !

    Hi XI Gurus.. I need advice in modelling a BPM. We have a scenario 1.) ECC sends Async request to PI ( there are three actions Create, update and Modify we are using webservices) 2.) PI makes Sync call to External system( We are using webservices). 3

  • IOS,on handle Event.DEACTIVATE, send message to server failed

    I'm trying to capture the "home" button press event, and notify my web server that my iOS application is deactivated, and then, my web server can send messages through APNs. I tried with this: NativeApplication.nativeApplication.addEventListener(Even