Installing Oracle 10g through console

Hi
Im a newbie, trying to install oracle 10g v(10.2.0.1.0) on my Linux server which has non-graphical environment.
Can anybody guide me to install the above setup into a console/command prompt based environment?
Peter
Edited by: user10707566 on Jan 23, 2009 11:15 AM

Hello,
You can make use of response file to install oracle software silent mode or non-interactive. You can find a reponse file under ../response/enterprise.rsp
You can find detailed information about using reponse file and how to install in non-interactive method
http://download.oracle.com/docs/cd/B19306_01/install.102/b15662/app_nonint.htm#sthref394
Regards

Similar Messages

  • Installing Oracle 10g throught console

    Hi
    Im a newbie, trying to install oracle 10g v(10.2.0.1.0) on my Linux server which has non-graphical environment.
    Can anybody guide me to install the above setup into a console based environment?
    Peter

    Please delete this thread i unfortunately post it in wrong forum
    Sorry for inconvenience

  • Installing oracle 10g release 2 on spark solaris!! urgent help!

    hi guys!
    Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors.
    ORA-27154: post/wait create failed
    ORA-27300: OS system dependent operation:semget failed with status: 28
    ORA-27301: OS failure message: No space left on device
    ORA-27302: failure occurred at: sskgpcreates
    Edited my kernel parameters and in the /etc/system file, ai've added
    set noexec_user_stack=1
    set semsys:seminfo_semmni=100
    set semsys:seminfo_semmns=1024
    set semsys:seminfo_semmsl=256
    set semsys:seminfo_semvmx=32767
    set shmsys:shminfo_shmmax=4294967295
    set shmsys:shminfo_shmmin=1
    set shmsys:shminfo_shmmni=100
    set shmsys:shminfo_shmseg=10
    Space aint an issue and dont know how to over come this error!
    Should ai just install the db using scripts and run the neccessary .sql scripts instead of going through dbca?
    junior DBA in distress.

    This appears to be because of low semaphores setting. Did you reboot your server after making the /etc/system parameter changes ?
    -Ramesh

  • Issues while installing ORACLE 10g R2 RAC on RHEL 5.3

    i am installing oracle 10g R2 RAC on RHEL 5.3 in a test environment. my aim was to install using ASM.
    i went through the pre-requisites ok before beginning with the installation.
    since RHEL 5.3 doesnt support raw devices i used
    http://www.idevelopment.info/data/Unix/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#Configure%20iSCSI%20Initiator%20and%20New%20Volume
    udev to configure shared storage. my storage is on openfiler as a iSCSI target.
    fdisk -l on both nodes shows the shared drives.
    [root@node1 ~]# fdisk -l
    Disk /dev/sda: 21.4 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1          13      104391   83  Linux
    /dev/sda2              14        2053    16386300   8e  Linux LVM
    /dev/sda3            2054        2372     2562367+  82  Linux swap / Solaris
    Disk /dev/sdd: 10.5 GB, 10502537216 bytes
    64 heads, 32 sectors/track, 10016 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdd1               1       10016    10256368   83  Linux
    Disk /dev/sdb: 10.5 GB, 10536091648 bytes
    64 heads, 32 sectors/track, 10048 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1               1       10048    10289136   83  Linux
    Disk /dev/sdc: 10.5 GB, 10536091648 bytes
    64 heads, 32 sectors/track, 10048 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdc1               1       10048    10289136   83  Linux
    Disk /dev/sdf: 10.5 GB, 10569646080 bytes
    64 heads, 32 sectors/track, 10080 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdf1               1       10080    10321904   83  Linux
    Disk /dev/sde: 10.5 GB, 10502537216 bytes
    64 heads, 32 sectors/track, 10016 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
       Device Boot      Start         End      Blocks   Id  System
    /dev/sde1               1       10016    10256368   83  Linux
    [root@node1 ~]# ls -l /dev/iscsi/arpl*
    /dev/iscsi/arpl1:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sde
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
    /dev/iscsi/arpl2:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdd
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
    /dev/iscsi/arpl3:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdb
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
    /dev/iscsi/arpl4:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdc
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
    /dev/iscsi/arpl5:
    total 0
    lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdf
    lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
    [root@node1 ~]# configuring udev results in the drives being mapped to persistent drive names eg. /dev/iscsi/arpl1/part1
    still when i enter the name of the raw device which i have created i get the following error. please help
    Image: !http://img91.imageshack.us/img91/7448/oracle.png!

    did you check this
    http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14203/storage.htm#BABBHECD
    http://download.oracle.com/docs/cd/B28359_01/install.111/b28263/storage.htm#CDEBFDEH
    also before you do what is suggested on the url posted by Mufalani,
    it seems that you should do the following:
    Check existence of udev raw mapping rule file /etc/udev/rules.d/60-raw.rules
    On RH/EL5, udev raw mapping rule file /etc/udev/rules.d/60-raw.rules should exist by default as part of the util-linux package, for example:
    # ls /etc/udev/rules.d/60-raw.rules
    /etc/udev/rules.d/60-raw.rulesCreate a custom udev raw mapping rule file, /etc/udev/rules.d/61-oracleraw.rules say, for example:
    # touch /etc/udev/rules.d/61-oracleraw.rules3b. Add udev raw binding rules to /etc/udev/rules.d/61-oracleraw.rules file
    Add the udev raw binding rules to the /etc/udev/rules.d/61-oracleraw.rules file, for example:
    # cat /etc/udev/rules.d/61-oracleraw.rules
    # Raw bind to Oracle Clusterware devices
    ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
    ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"If migrating to RHEL5/OEL5 from an earlier Linux version that relied on /etc/sysconfig/rawdevices file for persistent raw device bindings, the following script can be used as a basis for generating your RHEL5/OEL5 udev rules. Note, the script does not factor device name persistency.
    #!/bin/bash
    grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
    if [ -z "$minor" ]; then
    echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
    else
    echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
    fi
    done

  • Solaris 10 x86 5.10 cannot install Oracle 10g (needs 5.9 or less!)

    I installed the latest Solaris 10 x86 rev 5.10 and then downloaded the "New" Oracle 10g for Solaris x86 oddly but not suprisingly the "New" Oracle 10g only installs on Solaris 10 x86 5.6, 5.7, 5.8, 5.9 GO FIGURE.
    Seem there should be a way to fake out the software to see a different version.
    Anybody know how to do this?
    thanks
    Phil

    And another workaround that seems to work can be found here:
    http://blogs.sun.com/roller/page/fintanr/20040803
    To quote from that page:
    Oracle 10g install on Solaris 10 workaround
    Quick work around for installing Oracle 10g on Solaris 10 (in our case on a v20z).
    After creating your staging area you run the Oracle installer and get an error similar to the following
    $ ./runInstaller   
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9.    Actual 5.10
                                          Failed <<<<
    To work around this you need to edit the oraparam.ini file, in our case this is /export/ora/Disk1/install/oraparam.ini.
    Edit the section
    [Certified Versions]
    #You can customise error message shown for failure through CERTIFIED_VERSION_FAI
    LURE_MESSAGE
    Solaris=5.6,5.7,5.8,5.9
    to be
    [Certified Versions]
    #You can customise error message shown for failure through CERTIFIED_VERSION_FAI
    LURE_MESSAGE
    Solaris=5.6,5.7,5.8,5.9,5.10
    And thats it, just run through your install as normal.

  • [Solaris] rebooting in installing Oracle 10g R2 after Clusterware install

    Hi..
    Currently I am practicing the configuration of Oracle 10g R2 RAC (Solaris x86-64) with a Clusterware 10g on VMware
    With the installation of Oracle Clusterware 10g software, there's no problem and look like working well on both nodes.
    But, whenever I try installing the Oracle 10g R2 with 'install the software only' option, I got unstoppable rebooting
    problem on the first node, rac1.
    I tried both installation mode: OUI-typed and Silent approaches. Nothing worked!!
    I wanted to figure out why this problem happened, but so far I did not have any bright answer for this. I looked in
    the log and error files from /u01/app/oracle/oraInventory/logs, but there's no good answer or hint to resolve the
    problem I have now.
    Until now I tried 4 times of installations, but all stopped and were automatically rebooted at the same point with
    almost 3% copying of software. I found some of trainers are having same problem I have now.
    oracle@rac1 ~ $ crs_stat -t
    Name           Type           Target    State     Host
    ora.rac1.gsd   application    ONLINE    ONLINE    rac1
    ora.rac1.ons   application    ONLINE    ONLINE    rac1
    ora.rac1.vip   application    ONLINE    ONLINE    rac1
    ora.rac2.gsd   application    ONLINE    ONLINE    rac2
    ora.rac2.ons   application    ONLINE    ONLINE    rac2
    ora.rac2.vip   application    ONLINE    ONLINE    rac2
    This happens whenever I install the Oracle 10g R2 software.
    Is there any unknown or hidden problem regarding CRS or something else?
    Anybody has some hints or solution to this problem? If so, please let me have it ASAP.
    Thank you so much.

    I have gone through similar problem when installing oracle 10g in linux. You should follow the oracle installation documentation and make sure that all required OS patches and packages must be installed before starting the oracle installation. In my installation few OS packages was missing in the oracle documentation too and searching over the net solved the problem. I have installed few extra OS packages (RPM) and installed oracle successfully.
    Regards
    Asif Kabir

  • Can any one provide steps to install oracle 10g on RHEL5

    can any one provide steps to install oracle 10g on RHEL5...:)

    go through http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
    & http://www.emrealadag.com/dosyalar/it/Ora10gonRhel5.pdf
    Edited by: CKPT on Nov 23, 2010 7:15 PM

  • I am planning to buy macbook pro,as i am working as a oracle developer,so i want to ask will i be able to install oracle 10G or above versions on my mac...??

    i am planning to buy macbook pro,as i am working as a oracle developer,so i want to ask will i be able to install oracle 10G or above versions on my mac...??

    did you get a satisfactory response on your question re oracle 10g on os x snow leopard?  I am curious as I have been 'struggling' with it for a few days now.  To my experience thusfar, the oracle files provided are not up to date with current java versions or os x leopard and require some tweaking.  my own answer to your question is that it does appear that you can install and run oracle 10g on mac os x snow leopard, but it seems to be a little hacky to get through it all.  Some information here, other information there, haven't yet found a single source that has all the play by play and gotcha fixes documented.  I am rsisting nuking my debian install on amd64 just to put fedoracore which does appear to be a supported env for oracle 10 on linux.

  • Error while installing Oracle 10g on Fedora Core 1

    Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
    We have tried by using the on-line procedure and changing the required script to make believe it as said.

    Are you createing DB also???

  • Error in Installing Oracle 10g Express Edition Universal on WIndows2003

    While Installing Oracle 10g XE Universal On WIndows 2003 Server Standard Edition(Which is a standalone Machine). I got an following Error:
    Error No: 0x80040707
    Error Description: DLL Function Call Crashed: GetHostnameDll.getHostname.
    Plz find some solution for the above problem.

    Hi
    Here's the resolution that can work for you:
    Disable the "Print Spooler" service before running the installer.
    1.Open Control Panel: Start --> Settings --> Control Panel
    2.Double-click "Services"
    3.On the list of NT Services, right-click "Print Spooler"
    4.Select "Stop"
    5.Select "Properties"
    6.Under Startup Type, select "manual" or "disabled"
    7.Reboot your NT Server
    8.After rebooting, verify that the Print Spooler is still "stopped".
    9.Delete Program Files\Common Files\Installshield\Engine folder
    10.Re-run the installer.
    11.After installation, re-set the Print Spooler service to Startup type "Automatic" and start the service.
    Also, have a look at the installshield page: http://consumer.installshield.com/kb.asp?id=Q108167
    -Priya

  • Error message when installing Oracle 10g on Windows XP Professional

    Hello,
    I need help installing oracle 10g database. When I attempt to run the installation from the setup.exe icon, I get a message that says
    "Error in writing to directory C:\Documents and Settings\Owner\Local Settings\Temp\OraInstall2007-04-29_01-19-29PM. Please ensure this directory is writable and has atleast 45Mb of disk space. Installation cannot continue."
    When I try to open the installation from the Autorun icon, it points to an innability to find setup.exe and when I go back to Setup.exe, it gives me the above error. Everytime I try to run the installation and it fails, the installation leaves a folder in my Temp folder with the above format. Any help would be appreciated. Thank you.

    I do have administrative privilege on my computer and I have plenty of space. I have 80gb of free space. What do I do to successfully install the software without incurring those messages I displayed in my first thread?

  • Repeated ORA-12547 Messages after installing Oracle 10g

    Hi,
    I installed Oracle 10g on a Redhat ES 3 box, and the install went okay, but when I try and interact with the server I get the message:
    ORA-12547: TNS: lost contact
    For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
    I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it. I have been told that this previous partial installation may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Is there any configuration changes I can make to resolve it? Also, what does this message actually mean?
    I am new to Oracle, so thanks for any help with this problem.
    Colm.

    My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
    [root@awyr ~]# cat /proc/sys/kernel/shmmax
    2147483648
    [root@awyr ~]# cat /proc/sys/kernel/shmmni
    4096
    [root@awyr ~]# cat /proc/sys/kernel/shmall
    2097152
    [root@awyr ~]# ipcs -lm |grep "min seg size"
    min seg size (bytes) = 1
    [root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
    250
    [root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
    32000
    [root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
    100
    [root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
    128
    [root@awyr ~]# cat /proc/sys/fs/file-max
    65536
    [root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
    1024 65000
    [oracle@awyr Desktop]$ ulimit -n
    63536
    [oracle@awyr Desktop]$ ulimit -u
    4091
    [oracle@awyr Desktop]$ ulimit -a
    core file size (blocks, -c) 0
    data seg size (kbytes, -d) unlimited
    file size (blocks, -f) unlimited
    max locked memory (kbytes, -l) 32
    max memory size (kbytes, -m) unlimited
    open files (-n) 63536
    pipe size (512 bytes, -p) 8
    stack size (kbytes, -s) 8192
    cpu time (seconds, -t) unlimited
    max user processes (-u) 4091
    virtual memory (kbytes, -v) unlimited
    from sysctl -a
    my fs.file-max = 65536
    in my limits.conf I added:
    oracle soft nofile 4096
    oracle hard nofile 63536
    in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
    files I added:
    session required pam_limits.so
    and verified that it exists
    in my limits.conf I added
    oracle soft nproc 2047
    oracle hard nproc 16384
    my /etc/oratab has:
    orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
    I tried to change the N at the end to a Y but to no avail
    my /etc/oraInst.loc has:
    inventory_loc=/usr/local/oracle/app/oracle/oraInventory
    inst_group=oinstall
    Thanks again for your atention
    Richard

  • How can i install oracle 10g on linux cluster

    Dear all:
    please advice How can i install oracle 10g on linux cluster service ..
    thanks ,,

    Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
    Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

  • "Error In Writing to directory ..."  getting the error while installing oracle 10g in laptop

    Hi
    I thought I'd make my first post a hijack of a vaguely related thread,
    then some kind moderator could separate it out and branch it off to a post of its own.
    I'm not even sure this is in the proper forum.
    But anyhow ...
    i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
    Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
    so please tell me the solution as soon as possible
    thanks,
    arshad ayub

    Try the few resolutions mentioned here -
    forms 10g installation  error in writing to directory
    Specially -
    do not try to install from directory which has a space in its path
    TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
    Anuj

  • Installing Oracle 10g release 2 on RHEL4

    I am new with Linux and Oracle, and I have been assigned to install Oracle 10g Rel 2 in RHEL4 OS.
    I have checked and installed missing RPM's and created group users, passwd, configered Kernel, set Shell limits and finally created directories on root as so,
    mkdir -p /u01/app/oracle
    chown -R oracle:oinstall/u01/app/oracle
    chmod -R 775 /u01/app/oracle
    After, I mount the CD on root
    mount /media/cdrom
    After mounting is complete i enter into oracle user and do the following
    su - oracle
    cd /media/cdrom
    ./runInstaller
    However, I receive the following message : Olite installation requires ORACLE_HOME to be set. PLease set it and retry again.
    So I set the following like so,
    export ORACLE_BASE=/u01/app/oracle
    export ORACLE_HOME=/u01/app/oracle
    export ORACLE_SID= demo1
    ./runInstaller
    I than get the following message.
    Olite installation requires JAVA13_HOME to be set. PLease set it JDK 1.4.1 install area and rety again.
    I am not sure what JAVA13_HOME is but I am wondering if it is related to some Mobile sync. Also, could somebody help me and advise if I am going in the right direction here?
    Many thanks in advance.
    Alex

    Hi Alex
    Can you please control that ?
    JAVA13_HOME will be the location for your JAVA home. You can check the path for your java installtion, either 1.3 or 1.4 and set the path accordingly. Usually in Linux the path will be some thing like /local/java/jdk1.4.2.
    TNS_ADMIN should point to $ORACLE_HOME/network/admin
    Please read that also http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm
    Let us know if it helps you.
    thanks

Maybe you are looking for