Integration (IKM) does not appear in Interface

Hi All,
I'm using ODI 10.1.3.5 and trying to load data from sql to essbase.
Then my problem is..
when I want to choose the IKM in my interface, the IKM SQL to Hyperion (Data) and the IKM SQL to Hyperion (Metadata) aren't appear.
Whereas I've import the knowledge modules.
Any clue..??
Thanks.
Regards,
VieN

Hi VieN,
Trying to help you,
You need to select appropriate staging area to see the corresponding list of KMs.
Go to definition of your interface, check Staging Area Different from Target and select the appropriate logical schema (may be your source techno)/ SUNOPSIS MEMORY ENGINE.
Thanks,
G

Similar Messages

  • Integration Process does not appear in ID or Runtime Cache

    I created an Integration process and it has not appeared as an available service in the Integration Directory when createing a receiver determination. It also does not appear in the runtime cache.
    Last week I created a different IP and that exists in both places. Between that time and now we migrated the SLD from one machine to another; I don't know if this will have an affect, but all messages interfaces created today appear in the Integration Directory, so there is a communication path at least.
    Can anybody advise how to proceed?

    Hi
    You should import the IP from IR to ID.
    In ID Goto Objects tab, here expand Service without party, you got the IP, from here you right click mouse>new>give some name and import your created IP in the IR.
    Then you get the IP in the ID.

  • Accouting Integration - status does not appear for selection...

    We are on PPM5.0. We intend to replicate cProjects into PS.
    We have carried out Accouting Integration, with all the required settings/configs.
    The Project Type is marked for "Accouting Integration" (with "Flag for Transfer" as the trigger for PS project creation), yet we do not see "Flag for Transfer" in the status drop down at cProjects front end.
    Neither after "Create", nor after "Release" does this status appear in the drop down.
    Where could we be going wrong?
    Please advise.

    The object link for accouting integration was not maintained. Issue resolved.

  • Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

    Hi guys,
    I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
    I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
    lets start from the low level troubleshooting done:
    - plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
    - booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
    In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
    I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
    what I've ruled out:
    -HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
    -BIOS has zero options for graphics card options.
    Any ideas before i RMA this laptop? I'm at a loss. 

    OP's problem has been solved.  Also please don't resurrect and do not hijack other people's topics. Open your own one.
    >>Please read and comply with the Forum Rules.<<
    Topic Locked

  • Field added to cobl does not appear in FB01 interface

    Hi!
    I have added OXK3 transaction and set this field as "Opt Entry", but the field does not appear in FB01 transaction.
    I've also tried "Req Entry" status for new field it gave no effect.
    How this field can be enabled in the interface of standard FI transactions?
    Thanks!

    Some questions
    -Did you solve your problem ?
    -Did you come through OSS <a href="https://service.sap.com/sap/support/notes/174413">Note 174413 - Customer-specific fields in new Enjoy transactions</a> ?
    Regards

  • "photos" option does not appear in my interface.  Do have Music, Movies, TV Shows, Apps and Radio. Photo doesn't appear on iPhone or iPod Nano

    "PHOTOS" option does not appear in my interface.  Do have Music, Movies, TV Shows, Apps and Radio. Photo doesn't appear on iPhone or iPod Nano

    Are you looking at the tabs on the right-hand side of iTunes when you've connected and selected your device on the left-hand side of iTunes ? i.e. it should be one of the tabs that you use to chose what content to sync to the device : syncing photos

  • PXI System does not appear in MAX 4.0

    Hello,
    My system comprises LabVIEW RT 7.0, target PXI-8176 controller in PXI-1000B chassis, PXI-6608, PXI-6711, NI-4472, PXI-6704, PXI-6527, PXI-8423/4, PXI-8422/4.  This has been stable for two years. I recently solved an RS-485 2-wire mode configuration problem, using information in a discussion forum thread, by upgrading to NI-VISA 3.4.1 and NI-Serial 2.5.5.  MAX 4.0 was installed as part of this process.  Everything seemed to work fine.  I instructed a distant customer to do the same, but they experienced some difficulty. To ensure we were working from the same starting point, I re-initialized my PXI system, using PXI Format Hard Drive Disk, version 7.0, from MAX 4.0.  I configured TCP IP address, and re-installed the RT software on the PXI controller.
    Next, I attempted to configure the PXI controller and chassis, in MAX, to update the pxisys.ini file, but the PXI System (Unidentified) does not appear under Remote System>>IP address>>Devices and Interfaces.  Similarly for the serial ports.  This worked before, but I cannot get this back.  What is wrong?
    Best regards,
    RonC

    Hello S. Bassett
    The controller is definitely booting in RT mode -- I can still run my applications on the RT target.  VISA seems configured properly also, I can make VISA calls without error in the application.
    In fact, the RT system seems to work correctly, and I contemplated leaving it as it is. However, the fact that MAX does not recognize the PXI system makes me nervous, and I cannot do some of the things I may want to do, for example independently configure RS-485 port wire mode in MAX (the ports do not show up either).  Traditional DAQ configuration in MAX works.
    After your last post, I found a brief reference in MAX Help that indicated "PXI Services" had to be downloaded before the chassis could be configured.  But there are no other mentions of what PXI Services is, what it does, or how to install them. PXI Services does not show up as RT Software in MAX. In the Windows Add/Remove Programs control panel in Windows, in the National Instruments software section, there are two apparently related entries:
    - NI PXI Platform Services for LabVIEW Real-Time 1.5.1
    - NI PXI Platform Services for Windows 1.5.1
    But, I cannot get these to install on the RT target.  Not knowing what was causing the problem, I uninstalled everything from  National Instruments, deleted all folders, and reformatted the PXI platform.  There was one problem during this process -- after uninstalling NI-Serial 2.5.5, it does not get removed from the Add/Remove programs control panel.  There is still a registry key that the uninstaller did not remove -- presumably this is the problem.
    I have rebuilt everything, but could not get NI-Serial to install -- the installer thinks there is a newer installed on the RT target (there isn't) and refuses to install NI-Serial 2.5.5.  So right now, I cannot install NI-SERIAL (any version), or remove the 'existing' NI_SERIAL, because it isn't actually there, and there is no uninstaller.
    Otherwise, everything seems to be back to where it was before I "upgraded" to NI-VISA 3.4.1.  This was NI-VISA 3.0, LV RT 7.0, and MAX 3.0.2.  I have not yet been able to install NI-Serial, so I cannot yet see if I have also restored my original problem -- the one that led me to have to upgrade NI-VISA and NI-SERIAL in the first place.
    Most importantly, there is now a "PXI Services v1.1.2" installed on the RT target.  I am quite sure the problem with MAX 4.0 not recognizing my PXI system has to do with the absence of this driver on the RT target.
    Thanks again for your interest and help,
    RonC

  • Moved recording does not appear as content

    I recently encountered an issue where, when I attempt to move a recording from under a meeting to a Shared Content folder, either the list of Shared Content folders does not appear or, when the move is "successful", the recording is bot listed in the new content location.  Interestingly, if I change the URL of the destination location from "content" to "meeting"  (http://server/admin/content/sco/... to http://server/admin/meeting/sco/...), the recordng will appear in the list.  Unfortunately, under this "meeting view", there is not any editing or offline functionality.  The link for the recording continues to be functional and playback works normally, but the recording is otherwise treated as a "meeting" rather than content.
    Using the API, I used the sco-by-url XML action to compare the values of an affected recording to an unaffected one, but could not find anything that appeared unusual.  Both recordings were identified as the "content" type.
    Atempting to edit the video, or make an offline copy, by modifying the usual link produced by clicking those button with the appropriate url-path generates a "Not Found - The selected resource does not exist" error.  The editing and offline copy processes worked normally prior to the move.
    We are currently running Adobe Connect version 8.2.0.0:
    package=8.2.0.1.156.20110921.963902
    installer=8.2.0.0.11.20110728.938680
    fmg=8.2.0.0.4.20110906.879854
    fms=8.1.1.0.2.20110427.772086
    presenter=8.2.0.0.6.20110824.924658
    cps=8.2.0.1.3.20110920.973276
    mssql=8.1.0.0.10.20110311.8644363
    teleintercall=8.1.0.0.2.20110207.776631
    telepremierena=8.1.0.0.21.20110412.882778
    telepremiereemea=8.1.0.0.21.20110412.882778
    cpshelp=8.2.0.0.4.20110908.964981
    addins=8.2.0.0.3.20110831.929039
    dbscripts=8.2.0.0.23.20110818.956139
    teleavaya=8.1.0.0.4.20110412.882778
    telecisco=8.1.0.0.17.20110412.882778
    telemeetingone=8.1.0.0.2.20110207.776631
    telephonyservice=8.1.0.0.8.20110228.847019
    tomcat=6.0.29
    stunnel=4.28
    Is there another mechanism Adobe Connect discerns between the content and meetings so far as under with view/interface it will be displayed?  Is there a way to correct this behavior for existing files?  Thanks for any insight.
    Eric

    Having support look at this may be the best option. Since you are using your own server, you should call 866-335-2256, wait for the second round of prompts and then option 1. Have your support contract number ready when you call.

  • MiniTOC does not appear in translated source file

    RoboHelp 8.0.2
    WebHelp Output
    I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
    The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
    The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
    I have no clue how to resolve this issue. Sample code and screens are listed below.
    Donna
    English Source
    <h1><a name="Top"></a>Working with Web Ordering</h1>
    <p&gt;This topic explains how to generate and maintain NAPA and Factory orders.
    (Special orders and Non NAPA orders will be available in a future release).
    You perform these tasks on the <span style="font-weight: bold;">Order
    Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
    Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
    &gt; Web Ordering</span&gt; from TAMS II BackOffice.</p&gt;
    <p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
    </span&gt;<span&gt;topic</span&gt; for instructions on common functionality such
    as sorting data.</p&gt;
    <?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
    list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
    margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
    <p&gt;&#160;</p&gt;
    <h2>Adding a New Order</h2>
    <p&gt;Follow these instructions to create a new purchase order:</p&gt;
    French Source
    h1&gt;<a name="Top"&gt;</a&gt;Utiliser le module de commande en ligne</h1&gt;
    <p&gt;Cette rubrique explique comment créer et gérer des commandes NAPA et
    d'envoi direct. (Les commandes spéciales seront disponibles dans une version
    future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;"&gt;Gestion
    des commandes</span&gt;. Cette rubrique suppose que l'utilisateur est connecté
    et que la <span style="font-weight: bold;"&gt;Gestion des commandes</span&gt;
    a été lancée à partir de la page de renvoi de TAMS&#160;II. </p&gt;
    <p&gt;Voir&#160;: La rubrique <span style="font-weight: bold;"&gt;Survol de l'interface
    Web de TAMS&#160;II</span&gt; pour des instructions sur les fonctions courantes
    comme le tri des données.</p&gt;
    <h2&gt;Ajouter une nouvelle commande</h2&gt;
    <p&gt;Suivre les instructions ci-dessous pour créer un nouveau bon de commande&#160;:</p&gt;

    The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.

  • This XML file does not appear to have any style information associated with

    Hi All,
    I have IDOC to XML file scenario.
    In SXMB_MONI, it showed the message processed successfully (checkered flag).
    I open the payload in the target, I'm able to see the XML format without error.
    then I checked in RWB the overall status is successful.
    But when I checked the detail (message content) I got the following message:
    "This XML file does not appear to have any style information associated with it".
    So physical file created is like corrupted.
    If using XML marker to open the file it show warning "Invalid Unicode Sequence".
    The thing is when rerun the whole interface again, which is mean the same idoc send from the source, the file created successfully. Sometimes need to rerun twice or more than that to get the file.
    Anyone has idea on what is wrong here?
    Thanks,
    Victor.

    Hi Baskar,
    Thanks for your reply.
    It's PI 7.0.
    Overall status is successful but when I go to RWB to check the message content i got the error message above.
    Target system is only normal FTPS server.
    XML file is created as well but it's showing error when we open it.
    The weird thing is without fixing anything if we rerun the same interface with same set of data sometimes the error is gone by itself.
    Thanks,
    Victor.

  • Created new data source, does not appear in the list

    Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
    thanks
    Srinivas

    Hi
    I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
    - If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
    - It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
    - Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
    thanks
    Srinivas

  • Programmatically created calendar view does not appear on view selector menu

    Hi!
    I'm using the following code to create a calendar view for a list:
    using (var site = new SPSite("http://localhost"))
    var viewFields = new System.Collections.Specialized.StringCollection { dateStartFieldName, dateEndFieldName, titleFieldName };
    var query = string.Format("<Where><DateRangesOverlap><FieldRef Name='{0}' /><FieldRef Name='{1}' /><Value Type='DateTime'><Month /></Value></DateRangesOverlap></Where>", dateStartFieldName, dateEndFieldName);
    var viewData = string.Format("<FieldRef Name='{0}' Type='CalendarMonthTitle' /><FieldRef Name='{0}' Type='CalendarWeekTitle' /><FieldRef Name='' Type='CalendarWeekLocation' /><FieldRef Name='{0}' Type='CalendarDayTitle' /><FieldRef Name='' Type='CalendarDayLocation' />", titleFieldName);
    var list = site.RootWeb.Lists["ESM Leaves"];
    var newView = list.Views.Add("Calendar11", viewFields, query, 0, true, false, SPViewCollection.SPViewType.Calendar, false);
    newView.ViewData = viewData;
    newView.MobileView = true;
    newView.Update();
    list.Update();
    My problem is that even though the view is created, it does not appear in the View links just above my list. It only appears in the drop down menu of views in the ribbon. On the contrary, if I create the view using the browser user interface (not programmatically),
    the view appears in both places.
    Do you have any idea why this might be happening?
    Dimitris Papadimitriou, Software Development Professional

    Hi papadi,
    I can reproduce the issue that creating calendar view using programming method, the view isn’t shown in view selector menu, and this only happens to calendar view, html view or other views are shown in the menu.
    After editing the web part, disable the selector menu, then re-enable the selector menu again, I can see the calendar view shown in the view selector menu, create a new calendar view using programming, the calendar view shows as expected.
    This seems indicate there is some issue in the view selector menu display, I would suggest you to first disable the view selector menu through edit the web part properties, then create the calendar view.
    Thanks,
    Qiao
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Qiao Wei
    TechNet Community Support

  • TS4036 my ipad wifi cellular 16 GB 4G switched off inbetween and is not switching on at all. I have tried to restart by using sleep/wake button, but red slider does not appear. I have recharged battery, still no response. what should i do?

    My iPad Wi-Fi cellular 16 GB 4G switched off suddenly, even when the battery was 40% available. It is not switching on again, i have tried restarting by using sleep/wake button, but red slider does not appear. I kept it off like it was overnight, in the morning agin recharged it, but still it is not switching on. it is not responding, except when i connect the charger, it gives a blink noise that recharge has started. I removed the SIM and tried restart it but no response, What should i do to restart it please?

    Seems to be working again, I haven't done anything though. And the "wifi" led on my laptop is off, which should mean that the interface is down.
    This is driving me crazy I don't understand how the all thing works, if anyone has any tips that would be very nice.
    Thanks!

  • Tv shows menu does not appear in ATV 2

    The 'TV shows' menu item does not appear in my brand new Apple TV 2.  I have rebooted a couple of times.  Any help appreciated

    Thanks for the answer.  After more research I realise that as I'm in Australia and there are no TV show rentals here that is why there is no TV Shows menu item.  This is despite the fact that the Australian AppleTV 2 site shows a screen shot of the Apple TV menu with 'TV Shows' on it.  When you read the text it does not mention TV shows. What I find most annoying is that there doesn't seem to be a way to access the Itunes store from the ATV2.  With ATV1 I could watch a TV show and if I wanted to immediately buy the next episode or the whole series I could do so from my ATV1 iTunes interface.  Now with the new ATV I can watch a show through home sharing if I have already purchased it but if I want to buy the next show I have to get up from the TV room, go to the study, buy the show on my iMac and then wait for it to download to stream to my ATV2.  Is this user friendly progress?
    While I understand that ATV2 is for rentals and that there is no hard drive storage, I can't believe that Apple couldn't come up with an interface that allowed the ATV2 to access and browse the iTunes store and then download purchased items to the iMac for streaming.
    As a, hopefully temporary, solution I have reconnected the ATV1 to a different HDMI input, and synced only unwatched TV shows.  This will allow me to then purchase new shows (or movies), which will be stored on iTunes for later streaming via ATV2.
    Am I missing something or is this the only solution?

  • Audio Mixer Window Does Not Appear

    I have been using Premiere Elements for years in various versions (current project in V8, just downloaded V9 trial. Tonight I went to use the Audio Mixer function and found that when I click on Audio Mixer in the dropdown menu it does not appear. I then downloaded the V9 trial and have the same issue.
    Its hard to believe that I have not tried to do audio mixer functions in V8. But the last time I used the audio mixer in Premiere Elements it was accessed with a small button and worked find. Perhaps that was version 7. I have no memory of when I upgraded from 7 to 8.
    Help! Why will the audio mixer window not appear?

    I tried to access the Mixer from both the drop down menu below the right side panel and top of the interface on 8.0. Then I loaded 9.0. Same test same result first time around.
    Then I read your note and tried both places again and the top of the interface worked in 9.0!  Now both locations work in both versions. Weird.
    Thanks very much for the response.

Maybe you are looking for