Intel Gigabit 1000 CT device some times does not start

Configuration:
========
875P Neo FIS2R, 300W PSU, Bios v1.6, Memory 2 x 256MB DDR 400 populated with Samsung chips in 1st and 3rd slots, 1 x WD400 40GB PATA, 1 x Seagate 160GB SATA (will install another one for RAID later), Sony CDRW, Dynamic overclocking turned OFF, No other overclocking applied, OS Win 2K Server (SP4), MSI FX5200 graphics card, On board audio enabled and installed drivers. So far no other problem other than the one described below
Issue:
===
Some times the Gigabit LAN device starts and other times it does not start. For the time being the RJ45 is not hooked up to anything (I.e. no external Hub or Switch). I have not established what could make it start or not, I do not change anything really, it seem random. Under device manager when it fails to start the error returned says that drivers could not be loaded because the device could not be started (error code 10).
This occured right from the begining, I have this motherbard for 3 days now. The machine has only the OS and the drivers loaded. no other software that could cause the problem. Only drivers from the MSI device driver CD have been loaded in the sequence stated.
Any help will be appreciated.
Thanks

Make that TWO boards with the same identical problem. The first one being the LAN and the second one being after clearing CMOS that the board won't POST or anything. Talked to MSI Tech Support on this one. All he could tell me is that it seemed really odd that the same problems happened twice in a row to me. He had me try all kinds of things, but he didn't get me any further than I got myself.
Quote
Originally posted by shinerdsg
I have the 865PE Neo2 FI2SR and I have the same problems with the Intel Gigabit LAN. Sometimes Windows will start the device, sometimes not (exact same issue with it not starting). I don't think it has anything to do with it, but after I installed the sound it did not work after that reboot. That was also the first reboot after installing the LAN driver. One reboot I joined a domain, and after the reboot trying to log on to the domain it told me it wasn't there, and logging on to the local PC found that the LAN was not working. But I have other problems now. The system won't boot and the D-Bracket LED shows to be hanging on "Testing RTC (Real Time Clock)."
Config:
P4 3.2C
Antec Case / Antec SL350 350W PSU
1GB Kingston HyperX PC3200 (2x512)
GeForce FX5200 128MB
WD Raptor S-ATA 36GB
DVD, CD-RW, ZIP

Similar Messages

Firefox stops responding and some times dose not start when clicked on alot!

fire fox 9 stops responding for long periods and some times dose not load when clicked on. Also please note fire fox refuses to load the comments section on Yahoo.com under the news tab. The little wheel on the bottom of the page just spins and spins and never loads this area of the page.
I think i know why but wonder since i have had issues with fire fox in the past with the whole not responding and load issues.

Firefox which stops responding after some time is a BIG problem. You're not the only one. The problem seems to be with sites which require Java. The problems I seem to have spotted is this : You visit a web site which needs Java so Java asks Firefox for the amount of memory needed and this is lent to JAVA. However, when you leave that web site, Java is naughty in that it doesn't give back the memory borrowd. Firefox then has to consume a lot of memory to the point that the whole computer system grinds to a halt as you have run out of memory.
Search in the forums for high memory or RAM and you will see many threads. In fact, when you first install Firefox it will ask if you want to send anonymous data about the memory usage!!

Some apps does not start automatically at start up

Hi guys.
I've noticed a little problem with my automatical start up apps. I have a few there: Growl, Dropbox, Fantastical... and also Quicksilver, but it doesn't load as the others. I have to run it after the whole start up.
I have the "Start at login" field marked in the Quicksilver preferences panel.
Any ideas?
Thanks!

I think the problem is related to the quarantine bug in osx-lion.
http://reviews.cnet.com/8301-13727_7-57374676-263/workarounds-for-quarantine-bug -in-os-x-lion/
the developer of herald send me some code i had to enter in console, and it worked!

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call i recive massege and the device donot close by itselfe

My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call i recive massege and the device donot close by itselfe

LadySarah
You cannot upgrade from v6 to v7 without purchasing iLife 08.
Can you give more details about your crashing issue. Make of camera etc.,
You can start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts), create an iPhoto library there and see if the problem is repeated. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD
Regards
TD

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

storage-vdc(config-if)# show module
Mod Ports Module-Type                         Model              Status
2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type                         Model              Status
2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
Mod Sw              Hw      World-Wide-Name(s) (WWN)
2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4    5.2(2)          0.107   --
7    5.2(2)          1.8     --
8    5.2(2)          1.8     --
10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model:                 DS-X9708-K9
Type (SFP capable):    10Gbase-SR
Speed:                 1000,10000
Duplex:                full
Trunk encap. type:     802.1Q
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
Rate mode:             dedicated
QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
CoS rewrite:           yes
ToS rewrite:           yes
SPAN:                  yes
UDLD:                  yes
Link Debounce:         yes
Link Debounce Time:    yes
MDIX:                  no
Port Group Members:    none
TDR capable:           no
FabricPath capable:    yes
Port mode:             Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-FINISAR
    part number is FTLX8571D3BCL-CS
    revision is C
    serial number is FNS12090EMJ
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
Tx Power       -2.65 dBm       1.49 dBm -11.30 dBm   -1.50 dBm     -7.30 dBm
Rx Power       -2.21 dBm       1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

Some Widget does not work after latest upgrade

Today is July 23rd, 2011. By recent latest upgrade, mainly for supporting Lion, where I am still using Snow Leopard 10.6.8, some widget does not work, including Battery Meter, Digital Clock Alarm, Victoria Digital Clock, etc.
By the way, my company use Chatter and I installed Chatter Desktop. Again, after recent upgrade, it no longer work anymore.
Do you experience the same problem?
For those who has upgraded to Lion, do you also find some widget does not work?

I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

HT1848 I downloaded a book on itunes on one computer and it is not listed on a seconded computer. Same account. I have tried updating purchases and transferring recent purchases, transferring purchases from another devices. Still does not appear.

I purchased a book on one macbook in my itunes account. I tried to open it on another account while logging into itunes account. The book does not appear.
I have tried updating purchases, the bottom at the bottom-update purchases from another device. Still does not appear.

If it's an audiobook then you will need to copy it over from the first computer to the second computer - audiobooks are currently one-time only downloads, so they won't appear under the Purchased link for re-downloading. If you copied it onto a device from the first computer then you should be able to copy it off that device to the second computer's iTunes via File > Transfer Purchases. If it's not on a device and both computers are on the same wifi network then you should be able to copy it over via home sharing (there are instructions on this page), or you can copy it to, for example, a flash drive (you can find it's location on the first computer by control-clicking it in your iTunes library and selecting 'Show In Finder') and then add it to the second computer's iTunes (File > Add To Library).
If it's an ibook then you should be able to re-download it from the store : re-downloading.

Imac 20" intel Leopard black screen, does not start up

Imac 20" intel Leopard black screen, does not start up,
yestarday i put my imac aluminium in sleep, when i wake up this morning the computer did not start up from sleep and also did not start up from the power button back, i try several times and nothing, i hear the sound of the start up but i remain with a black screen. What can be the cause? The video , maybe? I did not install any hardware lately on it.
note: i have a wireless keyboard & mouse
Message was edited by: mindsoul

Not running Leopard (Panther), but I have a similar problem on my 24" iMac. Computer was working fine last night (I shut it down) and when I went to boot up this morning the computer is stuck on a black screen.
The boot up sound is initiated but nothing after that. The power light stays at full brightness, if I touch the power button the light blinks and then after a while it goes out. A full reset does nothing. I've tried reseting my PRAM, which works because I hear the start up sound twice, but no change to the black screen.
I don't have access to another Mac, would inserting the Startup Disc I received with the computer do anything?

I used migration assn't to load a Time Machine backup onto a new mac. The first TM backup after that took some time, perhaps not surprising. But the backups thereafter have all taken hours, with huge amounts of "indexing" time. Time to reload TM?

I used migration assn't to load a Time Machine backup onto a new mac. The first TM backup after that took some time, perhaps not surprising. But the backups thereafter have all taken hours, with huge amounts of "indexing" time. Time to reload TM?

Does every backup require lots of indexing? If so, the index may be damaged.
Try Repairing the backups, per #A5 in Time Machine - Troubleshooting.
If that doesn't help, see the pink box in #D2 of the same link.

Facetime not working "the device to register does not have the correct access data"

I can't use my facetime on my macbook anymore. I used it already a lot of times, but now I have to log in with my Apple ID (and password) before I can use it. After this it asks which emailadress I want to use to make and get calls. After choosing this, it states that "the device to register does not have the correct access data". I can also not change anything at the preferences of facetime, as it has become unclickable (probably because I am not logged in). What to do now?

Create another standard user on your MB. I bet facetime will work from there. Unless you have replaced a motherboard and Apple forgot to flash your old serial number into it. Check serial number in About this mac. If it's not there it is your likely problem.
There might be other problems. Have you tried checking with Apple?

I cannot get itunes to play certain tv shows all i get is a black screen and the timer does not move what should i do?

I am trying to play a season on my computer but it will not play. The timer does not move and all i get is a black screen. Should i just repurchase the season. the season does play on my ipod.

http://support.apple.com/kb/ts3694
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Face time does not accept my Apple ID and will not work. Help!!, face time does not accept my Apple ID and will not work. Help!!

Hi, Face time does not accept my Apple ID and therefore Face time does not work. Any suggestions?

You might have some sort of interference or communication problem, I just wanted to check you were entering the right ID to begin with.
If you are using the correct ID (without spaces), then you might try restarting the router or trying another wifi channel to eliminate interference.

Some Applications does not Shutdown

By the time accumulating updates unfortunately I'm also accumulating some smaller annoyances. I'm using Arch64, GeForce 8600 GTS, Fluxbox.
Some applications does not shut down normally anymore and I can not tell any pattern (Neverball, Scribus, Mplayer). Once shutting down the application window freezes and one CPU goes to 100%. Killing via sigterm works. What could be the reason?
In addition there is no more functional screensaver on my office computer since the last NVIDIA update. xscreensaver-demo shows an empty frozen window. In case I let any screensaver start up, X is frozen and I must kill the process on another console.
Anybody out there has magic ideas?
Thanks!

Thank you for the suggestion!
Very safely I have trouble with Scribus, Mplayer and Neverball. One has Qt, another sound and the last 3D. I couldn't find anything in common. Another point is that on my notebook I have none of those troubles. I rather suppose it to be an interaction with somethin else. At my office, my home directory is on a NFS mount and most working files as well. This might make a difference, but why not every computer with the same Arch does the same trouble? There must be some individual difference.
What actually happens during application shutdown? Sigkill from the console ALWAYS works, but closing the application in any "normal" way fails.
Starting from a console generally shows you good startup problems, but not so much shutdown.
I will check the logs.

Intel Gigabit 1000 CT device some times does not start

Similar Messages

Maybe you are looking for