Interaction error 800a0e78

General project information
Using Captivate 5.5 to create quizzes.
Publishing to SCORM 1.2
Report Data: Quiz results and Slide Views
Reporting Level: Interactions and Score
I have changed the Interaction ID to text corresponding with the question rather that a seemingly random number.
The issue – When trying to view the details in our LMS the following error appears.
ERROR
clsOLEDB:openRecordset() : Conversion failed when converting the varchar value 'TCBYOTheft' to data type int.
ADODB.Recordset error '800a0e78'
Operation is not allowed when the object is closed.
/reports/reportViewer.asp, line 1724
Note: I beleive "TCBYOTheft" is the interaction ID of the first (randomized) question slide.
Any help would be appreciated.

The Interaction ID doesn't necessarily have to be an integer. It just needs to be unique across the entire course. I've never seen an LMS that demanded an integer for this ID. I think your error might be due to the LMS encountering two interactions with the same ID.
Captivate will track and ensure that the Interaction IDs are unique for all scored interactions in a given project file. But it obviously can't know about the interactions that might exist in another project file that you might happen to bundle up with this one as part of a multi-SCORM packaged course. A randomly-generated integer is a good start, but for even greater insurance of uniqueness across larger multi-module courses, you need to go further.
The problem is that many authors use Captivate templates as a way to initialise course modules and if (like me) you have the quiz questions already set up ready to go in these templates so that you save formatting time, then the Interaction IDs are already allocated in the template, and will be inherited by the projects spawned from these templates. This can mean that more than one module in the course could potentially have an interaction with the same ID.
To get around this, Captivate provides a Quiz Setting for an Interaction ID Prefix so that you can tag all interactions in a project file as belonging to the same module.
So, if you KNOW that your project file will be part of a larger multi-module course, you can make sure each module's interactions are still unique by appending the prefix.
It's always a good idea once you've created your modules to go to Project > Advanced Interaction dialog and just make sure that all scored Interactions have the prefix.

Similar Messages

Tab interaction error

I have a tab interaction on a left hand side of page. In one
of the tabs is a button interaction. When you click on the button,
it opens another tab interaction on the right hand side of the
page, now both set of tabs interactions appear. The tab
interactions work, but now that I have activated the second set of
tab interactions, it now affects the active tab mode of the first
set of tabs.
For example in the first set of tabs, I have tabs 1-4. On
each tab you click you get the tab header changes to indicate it is
the active tab. Also, the relevant tab contents appear. However ,
when I activate the second set of tabs. The first set of tabs is
affected. The active tab now stays on tab 4, no matter which of the
other tabs you select. However I still get the correct tabs
contents of each tab I click in the first set of tab interactions.
See interaction at:
http://www.lshtm.ac.uk/dl/programme/sample/taberror/taberror.htm
click on tab 4, then on the cloud button, which will open a
two tab interaction to right. Now try and click on any of the tabs
in the first set of tabs and you will see that it will always
default to tab 4

"webacity" <[email protected]> wrote in
message
news:g6kbdq$k8d$[email protected]..
>I have a tab interaction on a left hand side of page. In
one of the tabs is
>a
> button interaction. When you click on the button, it
opens another tab
> interaction on the right hand side of the page, now both
set of tabs
> interactions appear. The tab interactions work, but now
that I have
> activated
> the second set of tab interactions, it now affects the
active tab mode of
> the
> first set of tabs.
> For example in the first set of tabs, I have tabs 1-4.
On each tab you
> click
> you get the tab header changes to indicate it is the
active tab. Also, the
> relevant tab contents appear. However , when I activate
the second set of
> tabs.
> The first set of tabs is affected. The active tab now
stays on tab 4, no
> matter
> which of the other tabs you select. However I still get
the correct tabs
> contents of each tab I click in the first set of tab
interactions.
>
> See interaction at:
>
http://www.lshtm.ac.uk/dl/programme/sample/taberror/taberror.htm
> click on tab 4, then on the cloud button, which will
open a two tab
> interaction to right. Now try and click on any of the
tabs in the first
> set of
> tabs and you will see that it will always default to tab
4
The answer to your question depends on exactly how this is
built :-)

Never implemented exception handling in Stored Procedures

I have lots of stand alone stored procedures callled from .NET 20 programs that follow the following pattern. They runn against Oracle 10.2 on Win2003. The only deviiation is a couple where I insert to temptables. I specify a parameter for messages but don't know the best way to implement for Oracle as well as any tips on ODP.NET/oracle interactions error handling.
1. Is it recommended to implement exception handling in With Clauses?
2. If there is an exception in one cursor's SQL, how do I still execute the second?
3. Is it best in some circumstances to pass a null back to client and check for null in program?
From .NET programs I have run into a couple of problems.
4. TNS packet failure.
Anyways any suggestions or experiences are welcome.
CREATE OR REPLACE PROCEDURE   GET_SALES_DATA
                  ,   p_businessdate      in   date
                  ,   p_message         out varchar2
                  ,   p_rcSales             out sys_refcursor
                  ,   p_rInventory            out sys_refcursor
) is
open p_rcSales for
with somedata as (select ...)
, someMoreData as (selct ...)
-- Main select
Select * from somedata sd inner join somemoredata smd on smd.key   = sd.key;
open p_rcInventory for
with somedata as (select ...)
, someMoreData as (selct ...)
-- Main select
Select * from somedata sd inner join somemoredata smd on smd.key   = sd.key;
-- CODE NOT IMPLEMENTED
-- exception
-- when TOO_MANY_ROWS then select 'Error handling for future implementations' into p_message from dual ;
-- when NO_DATA_FOUND then select 'Error handling for future implementations. No data' into p_message from dual;
-- when others         then raise_application_error(-20011,'Unknown Exception in GET_SALES_DATA Function');
-- WHEN invalid_business_date then select 'Invalid: Business date is in the current work week.' into p_message from dual ;
END GET_SALES_DATA;Pseudocode'ish because Module level variables and properties have not been defined here for brevity.
Public Class WebPage1
PAge_Load
   GetData
End Class Data Access Layer
Public Class DAL
Public Sub GetOracleData()
            Dim conn As OracleConnection
                Try
                    conn = New OracleConnection
                Catch ex As Exception
                    Throw ex
                End Try
                Dim cmd As New OracleCommand
                With cmd
                    conn.ConnectionString = System.Configuration.ConfigurationManager.ConnectionStrings("MyConnectionString").ToString
                    cmd.CommandText = DATABASE.GetSalesData
                    cmd.CommandType = CommandType.StoredProcedure
                    cmd.Connection = conn
                End With
                cmd.Connection = conn
                Dim oparam As OracleParameter
                oparam = cmd.Parameters.Add("p_businessdate", OracleDbType.Date)
                oparam.Value = BusinessDate.ToString("dd-MMM-yy")
                oparam = cmd.Parameters.Add("p_message", OracleDbType.Varchar2, ParameterDirection.Output)
                oparam = cmd.Parameters.Add("p_rc_inven_csv", OracleDbType.RefCursor, ParameterDirection.Output)
                oparam = cmd.Parameters.Add("p_rcSales", OracleDbType.RefCursor, ParameterDirection.Output)
                oparam = cmd.Parameters.Add("p_rcInventory", OracleDbType.RefCursor, ParameterDirection.Output)
                Dim Adapter As New OracleDataAdapter(cmd)
                Try
                    Adapter.TableMappings.Add("Table", Sales)
                    Adapter.TableMappings.Add("Table1", Inventory)
                    Adapter.Fill(dsOracleData)
                Catch ex As OracleException
                    HandleError("Exception Retrieving Oracle Data", ex, MethodInfo.GetCurrentMethod.Name, True)
                 Finally
                    If conn.State = ConnectionState.Open Then
                        conn.Close()
                    End If
                End Try
                dbMessages = cmd.Parameters("p_message").ToString
            End If
            arrStatusMessages.Add("Retrieved Oracle Data Successfully")
        End Sub
       ' Original Implementation ; No longer used
        Public function GetOracleData
           Dim conn As New OracleConnection
            conn.ConnectionString = dbconn.Connectionstring
             Dim cmd As New OracleCommand
                With cmd
                    conn.ConnectionString = System.Configuration.ConfigurationManager.ConnectionStrings("MyConnectionString").ToString
                    cmd.CommandText = DATABASE.GetSalesData
                    cmd.CommandType = CommandType.StoredProcedure
                    cmd.Connection = conn
                End With
                cmd.Connection = conn
                Dim oparam As OracleParameter
                oparam = cmd.Parameters.Add("p_businessdate", OracleDbType.Date)
                oparam.Value = BusinessDate.ToString("dd-MMM-yy")
                oparam = cmd.Parameters.Add("p_message", OracleDbType.Varchar2, ParameterDirection.Output)
                             oparam = cmd.Parameters.Add("p_rcSales", OracleDbType.RefCursor, ParameterDirection.Output)
                oparam = cmd.Parameters.Add("p_rcInventory", OracleDbType.RefCursor, ParameterDirection.Output)
                Dim Adapter As New OracleDataAdapter(cmd)
                Try
                    Adapter.TableMappings.Add("Table", Sales)
                    Adapter.TableMappings.Add("Table1", Inventory)
                    Adapter.Fill(dsOracleData)
                dim dt as datatable = dsoracledata.tables("sales")
                If IsDataNull(dt) Then
                     _errorType = DBErrorType.NullData
                End If
                If isDataEmpty(dt) Then
                     _errorType = DBErrorType.EmptyData
                End If
                _hasError = False
            Catch oraEx As OracleException
                  _ExceptionText = oraEx.Message.ToString
                _errorType = DBErrorType.OracleException
#If DEBUG Then
                Throw oraEx
#End If
            Catch zeroEx As DivideByZeroException
                _ExceptionText = zeroEx.Message.ToString
                _errorType = DBErrorType.DivideByZeroException
#If DEBUG Then
                Throw zeroEx
#End If
            Catch oflowEx As OverflowException
                _ExceptionText = oflowEx.Message.ToString
                _errorType = DBErrorType.OverflowException
#If DEBUG Then
                Throw oflowEx
#End If
            Catch argEx As InsufficientMemoryException
                _ExceptionText = argEx.Message.ToString
                _errorType = DBErrorType.InsufficientMemoryException
#If DEBUG Then
                Throw argEx
#End If
            Catch nomemEx As OutOfMemoryException
                _ExceptionText = nomemEx.Message.ToString
                _errorType = DBErrorType.OutOfMemoryException
#If DEBUG Then
                Throw nomemEx
#End If
            Catch Ex As Exception
                _ExceptionText = Ex.Message.ToString
                _errorType = DBErrorType.GenericException
#If DEBUG Then
                Throw Ex
#End If
            Finally
                If conn.State = ConnectionState.Open Then
                    conn.Close()
                End If
            End Try
End class Error Class
Public Class Errors
       Public Sub ExitClass()
            Return
        End Sub
        ' 'blnWriteNow says when Error is critical and no further processing needs to be done by class, then write to event logs or text files and call exit class
        ' to return control back to webpage. This is my first time trying this way.
        Public Sub HandleError(ByVal friendlyMsg As String, ByVal objEx As Exception, ByVal methodInfo As String, Optional ByVal blnWriteNow As Boolean = False)
            If Not blnWriteNow Then Exit Sub
            Dim strMessages As String
            strMessages = arrStatusMessages
            'Send error email
            If blnSendEmails Then
                 SendMail("[email protected], strMessages. applicationname, " has thrown error. ")
            End If
          'Throw error for   debugging
            If blnThrowErrors Then
                        Throw New Exception(strMessages & vbCrLf & objEx.Message)
            End If
           ' Write to event log and if not available (shared hosting environment), write to text log
            If blnWriteNow Then
                If blnWriteToEvtLog Then
                    If blnCanWriteToEvtLog Then    'Program has write permission to log
                         WriteToEventLog(strMessages, _appname, EventLogEntryType.Error, appname)
                    Else
                        If Not Directory.Exists( appPath & "\log") Then
                            Try
                                Directory.CreateDirectory( appPath & "\log")
                            Catch ex As Exception
                                arrStatusMessages.Add("Cant't write to event log or create a directory")
                            End Try
                        End If
                    End If
                End If
            End If
        End Sub
End Class

I have lots of stand alone stored procedures callled from .NET 20 programs that follow the following pattern. They runn against Oracle 10.2 on Win2003. The only deviiation is a couple where I insert to temptables. I specify a parameter for messages but don't know the best way to implement for Oracle as well as any tips on ODP.NET/oracle interactions error handling.
1. Is it recommended to implement exception handling in With Clauses?
2. If there is an exception in one cursor's SQL, how do I still execute the second?
3. Is it best in some circumstances to pass a null back to client and check for null in program?
From .NET programs I have run into a couple of problems.
4. TNS packet failure.
Anyways any suggestions or experiences are welcome.
CREATE OR REPLACE PROCEDURE   GET_SALES_DATA
                  ,   p_businessdate      in   date
                  ,   p_message         out varchar2
                  ,   p_rcSales             out sys_refcursor
                  ,   p_rInventory            out sys_refcursor
) is
open p_rcSales for
with somedata as (select ...)
, someMoreData as (selct ...)
-- Main select
Select * from somedata sd inner join somemoredata smd on smd.key   = sd.key;
open p_rcInventory for
with somedata as (select ...)
, someMoreData as (selct ...)
-- Main select
Select * from somedata sd inner join somemoredata smd on smd.key   = sd.key;
-- CODE NOT IMPLEMENTED
-- exception
-- when TOO_MANY_ROWS then select 'Error handling for future implementations' into p_message from dual ;
-- when NO_DATA_FOUND then select 'Error handling for future implementations. No data' into p_message from dual;
-- when others         then raise_application_error(-20011,'Unknown Exception in GET_SALES_DATA Function');
-- WHEN invalid_business_date then select 'Invalid: Business date is in the current work week.' into p_message from dual ;
END GET_SALES_DATA;Pseudocode'ish because Module level variables and properties have not been defined here for brevity.
Public Class WebPage1
PAge_Load
   GetData
End Class Data Access Layer
Public Class DAL
Public Sub GetOracleData()
            Dim conn As OracleConnection
                Try
                    conn = New OracleConnection
                Catch ex As Exception
                    Throw ex
                End Try
                Dim cmd As New OracleCommand
                With cmd
                    conn.ConnectionString = System.Configuration.ConfigurationManager.ConnectionStrings("MyConnectionString").ToString
                    cmd.CommandText = DATABASE.GetSalesData
                    cmd.CommandType = CommandType.StoredProcedure
                    cmd.Connection = conn
                End With
                cmd.Connection = conn
                Dim oparam As OracleParameter
                oparam = cmd.Parameters.Add("p_businessdate", OracleDbType.Date)
                oparam.Value = BusinessDate.ToString("dd-MMM-yy")
                oparam = cmd.Parameters.Add("p_message", OracleDbType.Varchar2, ParameterDirection.Output)
                oparam = cmd.Parameters.Add("p_rc_inven_csv", OracleDbType.RefCursor, ParameterDirection.Output)
                oparam = cmd.Parameters.Add("p_rcSales", OracleDbType.RefCursor, ParameterDirection.Output)
                oparam = cmd.Parameters.Add("p_rcInventory", OracleDbType.RefCursor, ParameterDirection.Output)
                Dim Adapter As New OracleDataAdapter(cmd)
                Try
                    Adapter.TableMappings.Add("Table", Sales)
                    Adapter.TableMappings.Add("Table1", Inventory)
                    Adapter.Fill(dsOracleData)
                Catch ex As OracleException
                    HandleError("Exception Retrieving Oracle Data", ex, MethodInfo.GetCurrentMethod.Name, True)
                 Finally
                    If conn.State = ConnectionState.Open Then
                        conn.Close()
                    End If
                End Try
                dbMessages = cmd.Parameters("p_message").ToString
            End If
            arrStatusMessages.Add("Retrieved Oracle Data Successfully")
        End Sub
       ' Original Implementation ; No longer used
        Public function GetOracleData
           Dim conn As New OracleConnection
            conn.ConnectionString = dbconn.Connectionstring
             Dim cmd As New OracleCommand
                With cmd
                    conn.ConnectionString = System.Configuration.ConfigurationManager.ConnectionStrings("MyConnectionString").ToString
                    cmd.CommandText = DATABASE.GetSalesData
                    cmd.CommandType = CommandType.StoredProcedure
                    cmd.Connection = conn
                End With
                cmd.Connection = conn
                Dim oparam As OracleParameter
                oparam = cmd.Parameters.Add("p_businessdate", OracleDbType.Date)
                oparam.Value = BusinessDate.ToString("dd-MMM-yy")
                oparam = cmd.Parameters.Add("p_message", OracleDbType.Varchar2, ParameterDirection.Output)
                             oparam = cmd.Parameters.Add("p_rcSales", OracleDbType.RefCursor, ParameterDirection.Output)
                oparam = cmd.Parameters.Add("p_rcInventory", OracleDbType.RefCursor, ParameterDirection.Output)
                Dim Adapter As New OracleDataAdapter(cmd)
                Try
                    Adapter.TableMappings.Add("Table", Sales)
                    Adapter.TableMappings.Add("Table1", Inventory)
                    Adapter.Fill(dsOracleData)
                dim dt as datatable = dsoracledata.tables("sales")
                If IsDataNull(dt) Then
                     _errorType = DBErrorType.NullData
                End If
                If isDataEmpty(dt) Then
                     _errorType = DBErrorType.EmptyData
                End If
                _hasError = False
            Catch oraEx As OracleException
                  _ExceptionText = oraEx.Message.ToString
                _errorType = DBErrorType.OracleException
#If DEBUG Then
                Throw oraEx
#End If
            Catch zeroEx As DivideByZeroException
                _ExceptionText = zeroEx.Message.ToString
                _errorType = DBErrorType.DivideByZeroException
#If DEBUG Then
                Throw zeroEx
#End If
            Catch oflowEx As OverflowException
                _ExceptionText = oflowEx.Message.ToString
                _errorType = DBErrorType.OverflowException
#If DEBUG Then
                Throw oflowEx
#End If
            Catch argEx As InsufficientMemoryException
                _ExceptionText = argEx.Message.ToString
                _errorType = DBErrorType.InsufficientMemoryException
#If DEBUG Then
                Throw argEx
#End If
            Catch nomemEx As OutOfMemoryException
                _ExceptionText = nomemEx.Message.ToString
                _errorType = DBErrorType.OutOfMemoryException
#If DEBUG Then
                Throw nomemEx
#End If
            Catch Ex As Exception
                _ExceptionText = Ex.Message.ToString
                _errorType = DBErrorType.GenericException
#If DEBUG Then
                Throw Ex
#End If
            Finally
                If conn.State = ConnectionState.Open Then
                    conn.Close()
                End If
            End Try
End class Error Class
Public Class Errors
       Public Sub ExitClass()
            Return
        End Sub
        ' 'blnWriteNow says when Error is critical and no further processing needs to be done by class, then write to event logs or text files and call exit class
        ' to return control back to webpage. This is my first time trying this way.
        Public Sub HandleError(ByVal friendlyMsg As String, ByVal objEx As Exception, ByVal methodInfo As String, Optional ByVal blnWriteNow As Boolean = False)
            If Not blnWriteNow Then Exit Sub
            Dim strMessages As String
            strMessages = arrStatusMessages
            'Send error email
            If blnSendEmails Then
                 SendMail("[email protected], strMessages. applicationname, " has thrown error. ")
            End If
          'Throw error for   debugging
            If blnThrowErrors Then
                        Throw New Exception(strMessages & vbCrLf & objEx.Message)
            End If
           ' Write to event log and if not available (shared hosting environment), write to text log
            If blnWriteNow Then
                If blnWriteToEvtLog Then
                    If blnCanWriteToEvtLog Then    'Program has write permission to log
                         WriteToEventLog(strMessages, _appname, EventLogEntryType.Error, appname)
                    Else
                        If Not Directory.Exists( appPath & "\log") Then
                            Try
                                Directory.CreateDirectory( appPath & "\log")
                            Catch ex As Exception
                                arrStatusMessages.Add("Cant't write to event log or create a directory")
                            End Try
                        End If
                    End If
                End If
            End If
        End Sub
End Class

How to Create Windows Service?

Dear Gurus,
We have created a service in windows 7 for our Application {PRINTSERVICE} as per below commands.
C:\Users\Administrator>sc create myservice1 binpath= "C:\VAFC Exes\Print Server\
Print server\printserver.exe" type= own type= interact error= ignore start= dema
nd
[SC] CreateService SUCCESS
WARNING: The service myservice1 is configured as interactive whose support is b
eing deprecated. The service may not function properly.
Please help in this regard, As we are thinking to run the PRINT SERVER as a windows service when the user is logged off.
Your urgent reply will be highly appreciated.
NOTE:-
Thanks
Adeel Imtiaz
Malik Adeel Imtiaz

Hi Imtiaz,
Please have a look at this thread which is already discussed in our forum
http://social.technet.microsoft.com/Forums/windowsserver/en-US/28f1b9a6-d649-4b8a-946b-4f80fc2fd9ee/how-to-create-a-service-from-application-in-windows-server-2008-standard?forum=winservergen
More over your query related to windows 7 . So seek help from concerning forum https://social.technet.microsoft.com/Forums/windows/en-us/home?category=w7itpro
Regards, Ravikumar P

Get SQL Server default data path via ADO/C++?

Hi,
I am trying to get the SQL Server default data path via ADO/Visual C++.
I find the SQL statements that will do that in
http://stackoverflow.com/questions/1883071/how-do-i-find-the-data-directory-for-a-sql-server-instance/12756990#12756990
So I just concat all the statements above into a CString object strStatements, then try to open a recordset as follows:
_RecordsetPtr m_pRecordset;
m_pRecordset.CreateInstance(__uuidof(Recordset));
m_pRecordset->Open(_bstrt(strStatements), _variant_t((IDispath *)m_pConnection, true), adOpenDymanic, adLockOptimistic, 0);
m_pRecordset->MoveFirst();
The last MoveFirst statement will cause com_error, which said
“ADODB.Recordset error '800a0e78'
Operation is not allowed when the object is closed.
It seems that there are no data in the recordset at all. What is the problem?
Thanks

Hello,
Which query statement did you used to get the database data and log file path? Can you get the result by run the query directly with SQL Server Management Studio? For example,
SELECT SUBSTRING(physical_name, 1, CHARINDEX(N'master.mdf', LOWER(physical_name)) - 1)
FROM master.sys.master_files
WHERE database_id = 1 AND file_id = 1
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

No radio validation on "add" button

Hello all,
I have a group of radio buttons, and a group of submit
buttons. If the user clicks the "add" button, I don't want
validation to be performed on the radios.
One other thing: If user clicks "delete" button and a radio
is selected, I would like user to see an "are you sure?" window or
something, preferably an interactive error message like the
validation message.
Are these possible?
My code is the basic 'what you see in the example' sort of
thing. I am happy to post it if need be.
Thanks,

Hello all,
I have a group of radio buttons, and a group of submit
buttons. If the user clicks the "add" button, I don't want
validation to be performed on the radios.
One other thing: If user clicks "delete" button and a radio
is selected, I would like user to see an "are you sure?" window or
something, preferably an interactive error message like the
validation message.
Are these possible?
My code is the basic 'what you see in the example' sort of
thing. I am happy to post it if need be.
Thanks,

Error while scheduling a Hyperion Interactive Report

Hi,
I'm trying to run a scheduled Hyperion Interactive Report (version 9.3.1). The report is scheduled to run for 1st of every month. After the report is scheduled. When a user tries to run the report on demand.
The error log states as follows:
$ view server_messages_IRJobService.log
"server_messages_IRJobService.log" [Read only] 38 lines, 2688 characters
<event logger="com.brio.one.services.bqservice.SERVICE" method="ThrID(7) Logger(ZDbgPrint)" timestamp="1247269603142" level="ERROR" thread="[ORB=_it_orb_id_1,Pool=1]::id-6" sequence_no="74">^M
<time>10 Jul 2009 16:46:43,142</time>^M
<context subject="TIPAdmin" session_id="zRMz99t6-00000122670ef701-0000-8197-0a3f0708" originator_type="IRJobService" originator_name="InteractiveReportingService" host="tsbrit02">^M
<info type="RESOURCE">IBQServiceImpl::runJob Job Identifier: TIPPFSMRPT Service Name: JF1_tsbrit02 Cycle Name: Cycle_0</info>^M
<info type="RESOURCE_ID">000001225ef102a5-0000-8197-0a3f0708</info>^M
</context>^M
<message><![CDATA[TCApp::ExecuteJavaScript failed: ]]></message>^M
</event>^M
^M
But when the report is uploaded and when the user tries running it. It runs without any problem.
The report has 3 filters(drop downs) on runtime.
Could anyone please help me in this regard.
Regards,
Sadiq

check your discoverer user role using:
select granted_role from dba_role_privs where grantee=upper('<username>');
from your database. the database to which the desktop is connecting.
check for connect, resouce, multiorg roles.

APEX 4.0: error while opening a XLS file downloaded from interactive report

Hi,
I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
"The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
Yes No Help
May be this one Apex 4.0 issue.
please help me.
Thanks
Mukesh

Hi,
is the next part of the code correct.
What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
You can also try below link..
Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
Hope this helps.
Regards,
-Sandeep

Reporting Services Error after Interactive sorting and drill down in pps

Hi
i have a report that has a drill down option that shows all workgroups within a specific parent group and an interactive sorting ass well on both columns parent group & workgroup
This is displayed in pps combined with a SharePoint
---the problem is that after sorting the parent group column by name i then press the drill through icon (+) next to it hopping to see all workgroups related to each parent group
- but instead
i receive this Reporting Services Error :
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
If I don't press the sorting and just drill through it works fine. the sorting itself also works fine.
any suggestions ?

Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Error while uploading WSDL file in Interactive Form Data Connection!

I have created we service to return some data based on user input.
I am trying to link this webservice to Interactive adobe form! and While creating new data connection->uploading WSDL file--> I am receiving error i.e. Invalid File.
Please help me in resolving this issue.
I have created this WSDL file copy/pasting XML code generates from "Open WSDL document for selected binding" link in SOAMANAGER.
Regards,
Naveen.I

Hello,
This is a Webservice created for the FM : HRXSS_PER_READ_EMERGENCY_AR
Here is the sample of the WSDL file generated, as asked by you.
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:n1="urn:sap-com:document:sap:rfc:functions">
- <wsdl:documentation>
<sidl:sidl xmlns:sidl="http://www.sap.com/2007/03/sidl" />
</wsdl:documentation>
<wsp:UsingPolicy wsdl:required="true" />
- <wsp:Policy wsu:Id="BN_BN_ZHR_READ_EMERGENCY">
<saptrnbnd:OptimizedXMLTransfer uri="http://xml.sap.com/2006/11/esi/esp/binxml" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/" wsp:Optional="true" />
<saptrnbnd:OptimizedXMLTransfer uri="http://www.w3.org/2004/08/soap/features/http-optimization" xmlns:saptrnbnd="http://www.sap.com/webas/710/soap/features/transportbinding/" wsp:Optional="true" />
- <wsp:ExactlyOne xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:sapsp="http://www.sap.com/webas/630/soap/features/security/policy" xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility">
- <wsp:All>
- <sp:TransportBinding>
- <wsp:Policy>
- <sp:TransportToken>
- <wsp:Policy>
<sp:HttpsToken />
</wsp:Policy>
</sp:TransportToken>
- <sp:AlgorithmSuite>
- <wsp:Policy>
<sp:TripleDesRsa15 />
</wsp:Policy>
</sp:AlgorithmSuite>
- <sp:Layout>
- <wsp:Policy>
<sp:Strict />
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
- <wsp:Policy wsu:Id="IF_IF_ZHR_READ_EMERGENCY">
- <sapsession:Session xmlns:sapsession="http://www.sap.com/webas/630/soap/features/session/">
<sapsession:enableSession>false</sapsession:enableSession>
</sapsession:Session>
<sapcentraladmin:CentralAdministration xmlns:sapcentraladmin="http://www.sap.com/webas/700/soap/features/CentralAdministration/" wsp:Optional="true" />
</wsp:Policy>
- <wsp:Policy wsu:Id="OP_IF_OP_HrxssPerReadEmergencyAr">
<sapcomhnd:enableCommit xmlns:sapcomhnd="http://www.sap.com/NW05/soap/features/commit/">false</sapcomhnd:enableCommit>
<sapblock:enableBlocking xmlns:sapblock="http://www.sap.com/NW05/soap/features/blocking/">true</sapblock:enableBlocking>
<saptrhnw05:required xmlns:saptrhnw05="http://www.sap.com/NW05/soap/features/transaction/">no</saptrhnw05:required>
<saprmnw05:enableWSRM xmlns:saprmnw05="http://www.sap.com/NW05/soap/features/wsrm/">false</saprmnw05:enableWSRM>
</wsp:Policy>
- <wsdl:types>
- <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:rfc:functions">
- <xsd:simpleType name="char1">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
"More simple types
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
</xsd:schema>
- <xsd:schema attributeFormDefault="qualified" targetNamespace="urn:sap-com:document:sap:soap:functions:mc-style" xmlns:n0="urn:sap-com:document:sap:rfc:functions">
<xsd:import namespace="urn:sap-com:document:sap:rfc:functions" />
- <xsd:complexType name="Bapiret2">
- <xsd:sequence>
"More element names
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="Messages" type="tns:Bapirettab" />
<xsd:element name="Records" type="tns:HcmtBspPaArR0006Tab" />
<xsd:element name="Records2" type="tns:HcmtBspPaArR0021Tab" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="HrxssPerReadEmergencyAr">
<wsdl:part name="parameters" element="tns:HrxssPerReadEmergencyAr" />
</wsdl:message>
- <wsdl:message name="HrxssPerReadEmergencyArResponse">
<wsdl:part name="parameter" element="tns:HrxssPerReadEmergencyArResponse" />
</wsdl:message>
- <wsdl:portType name="ZHR_READ_EMERGENCY">
- <wsp:Policy>
<wsp:PolicyReference URI="#IF_IF_ZHR_READ_EMERGENCY" />
</wsp:Policy>
- <wsdl:operation name="HrxssPerReadEmergencyAr">
- <wsp:Policy>
<wsp:PolicyReference URI="#OP_IF_OP_HrxssPerReadEmergencyAr" />
</wsp:Policy>
<wsdl:input message="tns:HrxssPerReadEmergencyAr" />
<wsdl:output message="tns:HrxssPerReadEmergencyArResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ZHR_READ_EMERGENCY" type="tns:ZHR_READ_EMERGENCY">
- <wsp:Policy>
<wsp:PolicyReference URI="#BN_BN_ZHR_READ_EMERGENCY" />
</wsp:Policy>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <wsdl:operation name="HrxssPerReadEmergencyAr">
<soap:operation soapAction="" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="service">
- <wsdl:port name="ZHR_READ_EMERGENCY" binding="tns:ZHR_READ_EMERGENCY">
<soap:address location="http://cieh4-srvr.collabera.com:8000/sap/bc/srt/rfc/sap/zhr_read_emergency/900/zhr_read_emergency/zhr_read_emergency" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Cheers,
Remi

SOAP Framework error while activating interactive form in SFP

hi everyone,
I am new to adobe forms, I got an error while activating interactive form
SOAP Framework error: SOAP Runtime Exception: CSOAPExceptionTransport: HTTP response contains unexpected content-type(100,101).
I am unable to trace this error, can anyone plz let me understand for what reason this error occurs.
Thanks in advance.
- Aditya

Its an issue with ADS installation or configuration. Let your BASIS team know about this error with screen print. We had same issue and BASIS fixed it.
Raja

No such method error when launching the Interactive form

Hi Experts,
I have developed a simeple Java Webdynpro application and added an Interactive form without any controls in it. Created the context with one value node and a binary value attribute.
I have assigned value node to datasource and binary attribute to pdfSource. When I launch the application I am getting the following no such method error.
java.lang.NoSuchMethodError: com/sap/tc/webdynpro/clientserver/uielib/adobe/api/IWDInteractiveForm.setTemplateSource(Ljava/lang/String;)V
The currently executed application, or one of the components it depends on, has been compiled against class file versions that are different from the ones that are available at runtime.
If the exception message indicates, that the modified class is part of the Web Dynpro Runtime (package com.sap.tc.webdynpro.*) then the running Web Dynpro Runtime is of a version that is not compatible with the Web Dynpro Designtime (Developer Studio or Component Build Server) which has been used to build + compile the application.
My NWDS is of Version 7.0.06
and J2EE Engine is of Version 6.40.
any guess why I am getting this error.
Thanks
Chinna.

Issue solved. Compatablility issue NWDS 2.0 Version should use for NW 2004.

Error opening PDF downloaded from Interactive Report

hi -- I'm getting an error opening a PDF file downloaded from an interactive report.
I've seen on the forum that this could be related to the size of the file, but I've tried
this out on 10-row results (1k files) and it's still an issue.
I save the file to my file system. If I try to open it in Adobe Reader, I get:
File does not begin with '%PDF-'
and
Adobe Reader could not open <filename>.pdf because it is either not a supported
file type or because the file has been damaged (for example, it was sent as an email
attachment and wasn't correctly decoded).
If I try to open in Internet Explorer, I get:
File does not begin with '%PDF-'
Other users are having the same problem. Download to csv and open in Excel works fine.
Do I need to have special print attributes for this? I didn't think so... I'm just using the defaults
(response header = report settings, content disposition = attachment).
Ideas?
Thanks,
Carol

Hi,
I'm having the same problem that was described above, and my site does have BI Publisher installed, and it does successfully produce readable pdfs for many reports.
But there are other reports, even reports produced using the Apex Wizard and all defaults, that just keep producing the same Adobe Reader error reported above, ie
"Adobe Reader could not open <filename>.pdf because it is either not a supported
file type or because the file has been damaged (for example, it was sent as an email
attachment and wasn't correctly decoded)."
Any suggestions?
Cheers,
Peter

Pagination Reset Error on Interactive Report

I have an interactive report that shows 15 rows per "page." My user clicks next page at the bottom to say the 3rd page (rows 31-45) and then clicks on a column header and types a valid value in the search box for the column. The interactive report then returns an error that says
Invalid set of rows requested, the source data of the report has been modified.
Reset Pagination
I have an unconditional branch on the page that resets pagination. However, I don't believe the interactive report is actually submitting the page when it returns this result. Is this just a bug with interactive reports or did I miss something?
For reference, we're using Apex 4.0.2.00.07
Theme 11. Green Spring

Hi,
Bit same kind of post here
Reset pagination with dynamic action?
Regards,
Jari

JavaScript error on Interactive Report

When clicking on the Magnifying glass of my interactive report search bar, I receive a JavaScript error.
Line: 2 Char: 15193 Error: Syntax Error
The page that I am navigating to has 2 regions. The first is an interactive report and the second is an html region that has an Iframe reference to another interactive report. Based upon the selection of a radio group, the corresponding region(interactive report) displays. All other interactive reports work fine when their pages don't have a region with a Iframe reference.
If I navigate to another page after the error occurs and then come back to the page, everything then works fine. The error only happens on the first use. I have installed the latest patch set for Apex 3.2 I currently am running 3.2.1.00.11. I read a bug on Metalink that referenced this javascript error, but applying the patch set does not seem to fix the issue. The bug was 8568894.
Any help would be appreciated.

This might be useful for others also...
After hours and hours of debugging headers and responses and comparing pages to others which work, I realised that this interactive report's display condition is based on REQUEST = SUBMIT.
As such, the actions menu will NOT set the Request parameter when clicking in the actions menu and the Apex engine refuses to send anything back to the browser - not even an error message.
I'll raise a bug for this via Oracle Support.
Cheers, Pete

Interaction error 800a0e78

Similar Messages

Maybe you are looking for