Interactive Report based on pl/sql function body

Can an interactive report be based on a pl/sql function body returning the query sql? Or does it have to be based directly on the SQL?
Thanks

Hello "unknown user",
As far is I know an Interactive Report can only be based on 'regular' SQL. If you have a Report based on a 'PL/SQL function body returning SQL' the option to migrate the report to an interactive report is not there.
Regards,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/

Similar Messages

Conditional Display of Interactive Report Based On Different SQL Query

Hello,
I have two drop down list on top of my page and below that I have a interactive report.
Based on user selection of values from drop down, interactive report should change based on different SQL queries.
Is it possible to have different SQL queries based on values from drop down and generate interactive report based on that?
Thanks

I am passing my drop down value to apex_collection like the following:
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY( p_collection_name => 'IR_LIST',
p_query => REQUEST_VIEW(:P12_VIEW));However when I change the values from the drop down, :P12_VIEW is not getting the value from drop down even though I could see value being changed in URL. I have created page process for apex_collection
Process Point - OnLoad - Before Header
Run Process - Once Per Session or When ResetCould someone suggest as why I cannot get the values in function when drop down is changed?
Regards

Error in report when executing pl/sql function body returning sql query.

Hi,
I have used the pl/sql function body returning sql query for creating a report. I have created a datepicker(
P10_TASK_DATE) which can be submitted.The code is as below
DECLARE
v_sql varchar2(3000);
BEGIN
if :P10_TASK_DATE is not null THEN
v_sql:='select
* from tasks';
return v_sql;
else
v_sql:='select * from discovery';
return v_sql;
END IF;
END;if the date field is empty "select * from discovery" is executed and report is getting generated. But when we give a
date using date picker the page is submitted and i get "report error: ORA-01403: no data found" even
though the "tasks" table has data in it. Plz help
Thanks,
TJ

hi
Please try this
1. Create 2 region
1st region source=
select * from tasks'
go to the tab -> condition =
item NOT NULL
EXpression1 =:P10_TASK_DATE
this will run whenever the item have any date
2. open your 2 nd region source code= select * from discovery
put the condition
item is NULL
EXpression1 =:P10_TASK_DATE
thanks
Mark Wyatt

Problem to create a link with parameters using a PL/SQL function body

Hi everybody,
I need some help to create a link on a SELECT statement.
I have a region report with type "PL/SQL function body return SQL query".
I would like to use a link using HTML tag <a href>.
I know how to do the link, but I don't know to pass a parameters in <a href> statement.
Always I tried it doesn't work well.
My PL/SQL anonimous block is, (just with link) :
DECLARE
q vARCHAR2(4000);
BEGIN
q:='select     "INDICADOR"."NRINDICADOR" as "NRINDICADOR",';
q:=q||'     "INDICADOR"."DSINDICADOR" as "DSINDICADOR",';
q:=q||'''<span style="font-weight:bold;">';
q:=q||'''||TO_CHAR("TOTAL_INDICADOR"."VL_INDICADOR", ''999G999G999G990D00'')||''</span>''';
q:=q||' as "VL_INDICADOR",';
q:=q||'     "TOTAL_INDICADOR"."VL_META" as "VL_META" ';
q:=q||' from     "TOTAL_INDICADOR" "TOTAL_INDICADOR",';
q:=q||'     "INDICADOR" "INDICADOR" ';
q:=q||' where "INDICADOR"."NRINDICADOR"="TOTAL_INDICADOR"."NR_INDICADOR"';
RETURN q;
END;
Thanks for any help,
Alessandra

Your code is in a default value for an item, right?
You need to make sure :P33_YEAR is not null and handle the error in the PL/SQL if it is.
How is P33_YEAR populated? do you pass it in? check to see if it is making it there..
Message was edited by:
Bill Carlisle

Using Package to produce pl/sql function body returning sql query Report

I have existing code that we want to use in building reports in APEX. We are needing to modify it slightly to handle some new requirements, but would like to use them in reports based upon SQL query (pl/sql function body returning sql query) functionality.
Any suggestions as how to call these in an APEX report region?
Thank you,
Tony Miller
UTMB/EHN

Hi Tony-
I am also v new to Apex and you may have answered a question I was in search of. I, however, now have a couple more. First a bit of background-- Like in your situation, my college has a lot of existing code (400 +) that we need to get into Apex. The majority of this canned code contains one/both: 1) many lines, sometimes containing multiple select statements 2) imbedded create table & view statements (temp user owned). Up until reading your post, I was unable to figure out an easy way of getting this existing code into the product. Thanks. Now the questions, do you know how I would go about dealing with the create tables/views. I've read some posts on this forum which suggest temporary tables being unstable in this environment. Also, do you know if there's a size limitation when passing sql code via a function?
As you may/may not be able to tell, I'm a bit lost right now... so any info you can provide would be appreciated. Thanks.
Don

Reports based on PL/SQL Procedure/Function

Hi all,
After some serious Google and forum searches, it appears as if this is something that just isn't possible (or easy to do).
I've been charged with creating an APEX application that displays reports. There are a series of Procedures that will be written to return a result set, updated to take into account some filters that a user would provide. The key here is that the report won't be displayed until AFTER a user inputs some filters on a form and hits a Submit button. The project requires this functionality - allowing the report to be displayed and THEN filtered using the APEX IR Control is not desired (not my decision).
There doesn't seem to be an easy way to define a report in this manner. It appears that the query for a report query needs to be known ahead of time.
So, with that setup - is there a way to define an APEX report based on the return result of a PL/SQL function? OR is there a way to define a report using a SQL Query that is built based on user inputs?
Any help would be appreciated.
- Pedro

Hi,
Check if this post help you.
Dynamic html table
And normal reports can be also created from select that function is returning.
http://www.oracle.com/technology/products/database/application_express/howtos/dynamic_report.html
Br, Jari
Edit:
Maybe useful
http://www.apex-blog.com/oracle-apex/dynamic-report-regions-tutorial-32.html
http://www.oracleapplicationexpress.com/2009/02/interactive-report-based-on-plsql.html
Edited by: jarola on Sep 9, 2009 5:14 PM

PL/SQL function body returning SQL - report error:ORA-01403: no data found

Hi,
I am working on Application Express 4.0.2.00.06, and 11G database.
I have a problem with classic report area of type - PL/SQL function body returning SQL query. Query works if I define region area as - Use Generic Column Names (parse query at runtime only), and does not when I define it - Use Query-Specific Column Names and Validate Query.
I am getting error:
report error:ORA-01403: no data found
This is my query that is returned from function, and displayed with htp.p, and it works ok and returns data in SQL Developer and SQL Workshop (in Apex).
<code>
/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA
</code>
As you can see, I even tried with workaround that I found on the previous post on the forum, and that is to put /* select 1 from dual */ to start query.
Any help would be appriciated.

/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA

Query on Reoprts-pl/sql function body returning sql query

Hi,
I am facing a starnge problem.. and would like to know the reason for it.
The situation is as follows:
I have a report (pl/sql function body returning sql query based). My query is as follows:
declare
l_query1 varchar2(2000);
begin
if (:P102_min_value is not null and :P102_max_value is null) then
l_query1 := 'select decode(:P102_date,'1',date1) Transaction_Date, decode(:P102_first_name,'2',first_name) First_Name from (
select * from MORTGAGE_LOAN_LEADS where APPRX_LOAN_AMOUNT >=:P102_min_value
return (l_query1);
end if;
end;
This returns the error as :
1 error has occurred
Function returning SQL query: Query cannot be parsed within the Builder. If you believe your query is syntactically correct, check the generic columns checkbox below the region source to proceed without parsing.
(ORA-06550: line 7, column 20: PLS-00103: Encountered the symbol "1" when expecting one of the following: * & = - + ; < / > at in is mod remainder not rem <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_ LIKEC_ between || multiset member SUBMULTISET_)
How do i correct this? am i right in thinking that the single quotes indicating a string within a select query is creating the problem? Beacuse if i use an sql query report and use the following query, it is working fine...
select
decode(:P102_date,'1',date1) Transaction_Date,
decode(:P102_first_name,'2',first_name) First_Name
from (
select * from MORTGAGE_LOAN_LEADS where APPRX_LOAN_AMOUNT >=:P102_min_value
But i need to write pl/sql function, so that multiple report can be returned based on different conditions. Please guide me.
Thanks,
Sumana

Does that mean that both in if and else we need to have same columns selected?
if thats the case.. any idea how i can implement it in my code. The situation here is that the columns that need to be selected are dynamic and keep on changing...
if i try to implement like this and run the page, it gives the following error:
Query is:
declare
l_query1 varchar2(4000);
begin
if apex_application.get_current_flow_sgid(:APP_ID) = apex_application.get_sgid then
if (:P102_min_value is not null and :P102_max_value is null) then
l_query1 := 'select decode(' || :P102_date|| ',''1'',date1) Transaction_Date, decode(' || :P102_first_name || ',''2'',first_name) First_Name from (
select * from MORTGAGE_LOAN_LEADS where APPRX_LOAN_AMOUNT >=' || :P102_min_value ||'
elsif (:P102_min_value is null and :P102_max_value is not null) then
l_query1 := 'select decode(' || :P102_date|| ',''1'',date1) Transaction_Date, decode(' || :P102_first_name || ',''2'',first_name) First_Name from (
select * from MORTGAGE_LOAN_LEADS where APPRX_LOAN_AMOUNT >=' || :P102_max_value ||'
else
l_query1 := 'select date1,first_name from MORTGAGE_LOAN_LEADS where rownum = 1';
end if;
else
l_query1 := 'select date1,first_name from MORTGAGE_LOAN_LEADS where rownum = 1';
end if;
return l_query1;
--dbms_output.put_line( l_query1);
end;
The Error is:
failed to parse SQL query:
ORA-00936: missing expression
If i try to run the same in command prompt, it always goes to the else part... (else of outer if)

Problem with PL/SQL Function Body

Hi,
I'm getting the following error, when i run the report.
I'm trying to fetch a year value from a table based on a parameter value ":P33_YEAR"
ORA-01403: no data found
Error ERR-1904 Unable to compute item default: type = Function Body computation_type= DECLARE FY VARCHAR2(6); BEGIN SELECT DISTINCT YEAR1 INTO FY FROM REP WHERE YEAR = TRIM(:P33_YEAR);
RETURN FY; END;.
I have written this code in a PL/SQL Function Body for a Hidden item.
Please let me know whats wrong with this code?
Thanks
CK
Message was edited by:
user536304

Your code is in a default value for an item, right?
You need to make sure :P33_YEAR is not null and handle the error in the PL/SQL if it is.
How is P33_YEAR populated? do you pass it in? check to see if it is making it there..
Message was edited by:
Bill Carlisle

PL/SQL function body return sql query, no data found problem

Hi all,
we are trying to build a dynamic report based on item selection by user. we are using SQL Query (PL/SQL function body returning SQL query). However when a user change the item and submit the page . The following error appears.
ORA-01403: no data found.
our query is so simple
declare
l_query varchar2(30000) default 'select id from chw';
begin
if(:P11_PARA=1) then
l_query:='select name from chw';
end if;
return l_query;
end;
any quick help please.

Hello Mike,
I tried it, the problem still exists.
ORA-01403: no data found
my new code is
declare
l_query varchar2(30000) default 'select id from chw';
begin
if (nvl(TO_NUMBER(:P11_PARA),0) = 1) then
l_query:='select name from chw';
end if;
return (l_query);
end;
note, there is no process in this page.
Edited by: M.Jabr on Oct 14, 2009 6:13 AM

Wild card searching in sql squery (pl/sql function body returning......)

Hi,
I've a report based on a sql query (pl/sql function body returnin a sql query).
One of the statements is
select .. from ...
where name_of_person = :P17_NAAM
I like to built a wild card possibility (with like '%l%m%') to show all persons with in their name an l, and an m (after the l)
how to modify this statement?
any reaction will be appreciated.
Leo

Leo,
If I understand you correctly, you want to let the user type the value without wild cards, and than to add them programmatically. If that's the case, here is what you can do:
1. Create a new item, say P17_HIDDEN_NAAM, that will contain the actual search criteria
2. Modify your pl/sql to:
begin
:p17_hidden_naam := null;
for l_i in 1..length(:P17_NAAM)
loop
    :p17_hidden_naam := :p17_hidden_naam || '%' || substr(:P17_NAAM, l_i, 1);
end loop;
:p17_hidden_naam := :p17_hidden_naam || '%';
return
    'select ..
       from ...
      where name_of_person like :p17_hidden_naam';
end;By the way, I think that it's much better to train your users to use wild cards than to do it in the program.
Sima

PL/SQL function body returning SQL query - ORA-06502: PL/SQL: numeric or value error

I'm attempting to dynamically generate a rather large SQL query via the "PL/SQL function body returning SQL query" report region option. The SQL query generated will possibly be over 32K. When I execute my page, I sometimes receive the "ORA-06502: PL/SQL: numeric or value error" which points to a larger than 32K query that was generated. I've seen other posts in the forum related to this dynamic SQL size limitation issue, but they are older (pre-2010) and point to the 32K limit of the DNS (EXECUTE IMMEDIATE) and DBMS_SQL. I found this post (dynamic sql enhancements in 11g) which discusses 11g no longer having the 32K size limitation for generating dynamic SQL. Our environment is on 11gR2 and using ApEx 4.2.1. I do not know which dynamic SQL method -- DNS or DBMS_SQL -- ApEx 4.2.1 is using. Can someone clarify for me which dynamic SQL method ApEx uses to implement the "PL/SQL function body returning SQL query" option?
As a test, I created a page on apex.oracle.com with a report region with the following source:
declare
l_stub varchar2(25) := 'select * from sys.dual ';
l_sql clob := l_stub || 'union all ';
br     number(3) := 33;
begin
while length ( l_sql ) < 34000 loop
    l_sql := l_sql || l_stub || 'union all ';
end loop;
l_sql := l_sql || l_stub;
for i in 1 .. ceil ( length ( l_sql ) / br ) loop
    dbms_output.put_line ( dbms_lob.substr ( l_sql, br, ( ( i - 1 ) * br ) + 1 ) );
end loop;
return l_sql;
end;
The dbms_output section is there to be able to run this code in SQL*Plus and confirm the size of the SQL is indeed larger than 32K. When running this in SQL*Plus, the procedure is successful and produces a proper SQL statement which can be executed. When I put this into the report region on apex.oracle.com, I get the ORA-06502 error.
I can certainly implement a work-around for my issue by creating a 'Before Header' process on the page which populates an ApEx collection with the data I am returning and then the report can simply select from the collection, but according to documentation, the above 32K limitation should be resolved in 11g. Thoughts?
Shane.

What setting do you use in your report properties - especially in Type and in Region Source?
If you have Type="SQL Query", then you should have a SELECT statement in the Region Source. Something like: SELECT .... FROM ... WHERE
According to the ERR-1101 error message, you have probably set Type to "SQL Query (PL/SQL function body returning SQL query)". In this situation APEX expects you to write a body of a PL/SQL function, that will generate the text of a SQL query that APEX should run. So it can be something like:
declare
mycond varchar2(4000);
begin
if :P1_REPORT_SEARCH is not null THEN
mycond:='WHERE LAST_NAME like :P1_REPORT_SEARCH ||''%''';
end if;
return 'select EMPLOYEE_ID, FIRST_NAME, LAST_NAME from EMPLOYEES ' ||mycond;
end;
And for escaping - are you interested in escaping the LIKE wildcards, or the quotes?
For escaping the wildcards in LIKE function so that when the user enters % you will find a record with % and not all functions, look into the SQL Reference:
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/conditions007.htm
(You would than need to change the code of your function accordingly).
If you are interested in escaping the quotes, try to avoid concatenating the values entered by the user into the SQL. If you can, use bind variables instead - as I have in my example above. If you start concatenating the values into the text of SQL, you are open to SQLInjection - user can enter anything, even things that will break your SQL. If you really need to allow users to choose the operator, I would probably give them a separate combo for operators and a textfield for values, than you could check if the operator is one of the allowed ones and create the condition accordingly - and than still use bind variable for inserting the filtering value into the query.

How to use a select list value in a PL/SQL function body returning SQLquery

Hi Friends,
I have a select list P6_TEST with values 'nav' anf 'jyo'. I am trying to create a report using "SQL Query (PL/SQL
function body returning SQL query)". In my report query can i check if P6_TEST='nav' and do something like the
code shown below.How can i do that.
DECLARE
v_sql VARCHAR2(3000);
BEGIN
IF :P6_TEST = 'nav' THEN
v_sql :=
'SELECT
* from department';
........................Thanks,
Nav

Nav:
What you have should work. Give it a go. Post back if you run into issues.
Varad

Region source (PL/SQL function body returning SQL query)

Hi, guys.
Here is what i try to do:
Create a region of type SQL Query (PL/SQL function body returning SQL query). In the source area i tried to put this:
DECLARE
v_new VARCHAR2(10);
v_SQL varchar2(32000);
BEGIN
v_new := :P102_HDN_NEW;
-- htp.p(v_new);
IF v_new = 'N-Set' THEN
v_SQL := 'select ' ||
ELSIF v_new = 'Y-Set' THEN
v_SQL := 'select ' ||
END IF;
RETURN v_SQL;
END;
And here is the reply from APEX:
1 error has occurred
Query cannot be parsed within the Builder. If you believe your query is syntactically correct, check the ''generic columns'' checkbox below the region source to proceed without parsing. The query can not be parsed, the cursor is not yet open or a function returning a SQL query returned without a value.
Now.
1. Variable is set with the right value.
2. Each statement (separately) returns SQL that works with no problems
3. Problem occures if i try to put IF statement around the SQL creation.
4. If i select "Use Generic Column Names (parse query at runtime only)" instead of "Use Query-Specific Column Names and Validate Query" then the script returns SQL properly, however report's column names are set to Col1, Col2,Col3 ......
Thnks in advence
Mike

OK. Here is enire statement:
DECLARE
v_new VARCHAR2(10);
v_SQL varchar2(32000);
BEGIN
v_new := :P102_HDN_NEW;
htp.p(v_new);
IF v_new = 'N-Set' THEN
v_SQL := 'select ' ||
'APEX_ITEM.DISPLAY_AND_SAVE(10,c.sdescr) descr, ' ||
'APEX_ITEM.DISPLAY_AND_SAVE(12,DECODE(ld.level,''All'', ''All Categories'',ld.level)) level, ' ||
'apex_item.checkbox(1, ld.opt_in_auto_flag, decode(ld.opt_in_auto_flag,NULL,''disabled'',''Y'',''checked'')) auto_in, ' ||
'apex_item.checkbox(2, ld.opt_in_manual_flag, decode(ld.opt_in_manual_flag,NULL,''disabled'',''Y'',''checked'')) manual_in, ' ||
'apex_item.checkbox(3, ld.opt_out_auto_flag, decode(ld.opt_out_auto_flag,NULL,''disabled'',''Y'',''checked'')) auto_out, ' ||
'apex_item.checkbox(4, ld.opt_out_manual_flag, decode(ld.opt_out_manual_flag,NULL,''disabled'',''Y'',''checked'')) manual_out, ' ||
'DECODE(c.code, ''NMBR'', NULL,''Change to '' || DECODE(ld.level,''All'',''Categories'',''All Categories'')) link_change, ' ||
'APEX_ITEM.DISPLAY_AND_SAVE(11,c.code) code ' ||
'from ' ||
'tbl1 c, ' ||
'tbl2 ld ' ||
'where c.code = ld.code ' ||
'and c.type = ''TYPE1'' ' ||
'and c.active = ''Y'' ' ||
'order by c.sorting ';
ELSIF v_new = 'Y-Set' THEN
v_SQL := 'select ' ||
'APEX_ITEM.DISPLAY_AND_SAVE(10,c.sdescr) descr, ' ||
'APEX_ITEM.DISPLAY_AND_SAVE(12,''All Categories'') level, ' ||
'apex_item.checkbox(1, c.option_1, decode(c.option_1,NULL,''disabled'',''Y'',''checked'')) auto_in, ' ||
'apex_item.checkbox(2, c.option_3, decode(c.option_3,NULL,''disabled'',''Y'',''checked'')) manual_in, ' ||
'apex_item.checkbox(3, c.option_2, decode(c.option_2,NULL,''disabled'',''Y'',''checked'')) auto_out, ' ||
'apex_item.checkbox(4, c.option_4, decode(c.option_4,NULL,''disabled'',''Y'',''checked'')) manual_out, ' ||
'DECODE(c.code, ''AAA'', NULL,''Options by AAA'') link_change, ' ||
'APEX_ITEM.DISPLAY_AND_SAVE(11,c.code) code ' ||
'from ' ||
'tbl1 c ' ||
'where 1 = 1 ' ||
'and c.type = ''TYPE1'' ' ||
'and c.active = ''Y'' ' ||
'order by c.sorting ';
END IF;
RETURN v_SQL;
END;
If i put just this
DECLARE
v_new VARCHAR2(10);
v_SQL varchar2(32000);
BEGIN
v_new := :P102_HDN_NEW;
htp.p(v_new);
v_SQL := 'select ' ||
'APEX_ITEM.DISPLAY_AND_SAVE(10,c.sdescr) descr, ' ||
'APEX_ITEM.DISPLAY_AND_SAVE(12,DECODE(ld.level,''All'', ''All Categories'',ld.level)) level, ' ||
'apex_item.checkbox(1, ld.opt_in_auto_flag, decode(ld.opt_in_auto_flag,NULL,''disabled'',''Y'',''checked'')) auto_in, ' ||
'apex_item.checkbox(2, ld.opt_in_manual_flag, decode(ld.opt_in_manual_flag,NULL,''disabled'',''Y'',''checked'')) manual_in, ' ||
'apex_item.checkbox(3, ld.opt_out_auto_flag, decode(ld.opt_out_auto_flag,NULL,''disabled'',''Y'',''checked'')) auto_out, ' ||
'apex_item.checkbox(4, ld.opt_out_manual_flag, decode(ld.opt_out_manual_flag,NULL,''disabled'',''Y'',''checked'')) manual_out, ' ||
'DECODE(c.code, ''NMBR'', NULL,''Change to '' || DECODE(ld.level,''All'',''Categories'',''All Categories'')) link_change, ' ||
'APEX_ITEM.DISPLAY_AND_SAVE(11,c.code) code ' ||
'from ' ||
'tbl1 c, ' ||
'tbl2 ld ' ||
'where c.code = ld.code ' ||
'and c.type = ''TYPE1'' ' ||
'and c.active = ''Y'' ' ||
'order by c.sorting ';
RETURN v_SQL;
END;
it works fune...

SQL query (pl/sql function body returning query) performance issue

I create my report in building my sql instruction with ( SQL Query pl/sql function body returning sql query );
My report take more than 20 seconds however if i did a cut and paste with the sql code in TOAD the same sql take 1 second.
To try to discover the source of the problem; i take the sql generated by the function and i create another report ( sql query ) this new report take 2 seconds.
My query is very big 25,000 characters with database link.
What is the difference between SQL-quey and sql-query(pl/sql function body returning sql query)
Thanks
Marc

Marc,
Firstly...don't compare the timings from Toad, since often Toad only fetches the first few records for you (i.e. it pages them).
Secondly....the database link could be a factor here, but without seeing your query it's too hard to say.
Can you post the query somewhere (on a webserver say)?

Interactive Report based on pl/sql function body

Similar Messages

Maybe you are looking for