Interactive report basic list concept

Suppose in a basic list i have 7 parallel detail list.i am in basic list is there any way to go directly to 7 th detail list from basiclist or from 1st detail list to 7 th detail list vice-versa.
plz tell me..i am waiting.. for reply
thanx
arya

Hi...
Just go through following code.... its for normal interactive reports...
TYPES : BEGIN OF st_kna1,
kunnr TYPE kna1-kunnr, "CUSTOMER NUMBER
name1 TYPE kna1-name1, "CUSTOMER NAME
END OF st_kna1.
TYPES : BEGIN OF st_vbak,
kunnr TYPE kna1-kunnr,
vbeln TYPE vbak-vbeln, "SALES DOCUMENT NUMBER
erdat TYPE vbak-erdat, "DATE ON WHICH THE RECORD WAS CREATED
audat TYPE vbak-audat, "DOCUMENT DATE
auart TYPE vbak-auart, "SALES DOCUMENT TYPE
ernam TYPE vbak-ernam, "NAME OF PERSON WHO CREATED THE OBJECT.
augru TYPE vbak-augru, "ORDER REASON
END OF st_vbak.
TYPES : BEGIN OF st_vbap,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr, "SALES DOCUMENT ITEM
matnr TYPE vbap-matnr, "MATERIAL NUMBER
charg TYPE vbap-charg, "BATCH NUMBER
matkl TYPE vbap-matkl, "MATERIAL GROUP
posar TYPE vbap-posar, "ITEM TYPE
END OF st_vbap.
DATA : it_kna1 TYPE STANDARD TABLE OF st_kna1,
it_vbak TYPE STANDARD TABLE OF st_vbak,
it_vbap TYPE STANDARD TABLE OF st_vbap,
wa_kna1 TYPE st_kna1,
wa_vbak TYPE st_vbak,
wa_vbap TYPE st_vbap.
DATA : v_fld(15),
v_kunnr TYPE kna1-kunnr,
v_vbeln TYPE vbak-vbeln.
SELECT-OPTIONS
PARAMETERS
SELECT-OPTIONS so_kunnr FOR v_kunnr. "CUSTOMER NUMBER
PARAMETERS : p_max TYPE i. "NUMBER OF HITS
START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_customerdata.
SET PF-STATUS 'MENU1'.
AT LINE-SELECTION
AT LINE-SELECTION.
IF sy-lsind = 1.
PERFORM get_salesheader.
ELSEIF sy-lsind = 2.
PERFORM get_salesitemdata.
ENDIF.
AT USER-COMMAND
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'DISP'.
PERFORM get_salesheader.
WHEN 'ITEM'.
PERFORM get_salesitemdata.
WHEN 'VA03'.
SET PARAMETER ID 'AUN' FIELD wa_vbak-vbeln.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDCASE.
TOP-OF-PAGE
TOP-OF-PAGE.
ULINE AT /1(56).
WRITE : /1 sy-vline ,
2(15) text-004 COLOR 1 ,
sy-vline ,
20(35) text-005 COLOR 1 ,
sy-vline.
ULINE AT /1(56).
TOP-OF-PAGE DURING LINE-SELECTION.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-lsind.
WHEN 1.
PERFORM get_topofpage1.
WHEN 2.
PERFORM get_topofpage2.
ENDCASE.
FORM GET_CUSTOMERDATA
FORM get_customerdata.
SELECT kunnr name1
FROM kna1
INTO TABLE it_kna1
UP TO p_max ROWS
WHERE kunnr IN so_kunnr.
IF sy-subrc EQ 0.
LOOP AT it_kna1 INTO wa_kna1.
WRITE : / sy-vline,
2(15) wa_kna1-kunnr ,
sy-vline ,
20 wa_kna1-name1,
sy-vline.
HIDE : wa_kna1-kunnr , wa_kna1-name1.
CLEAR wa_kna1.
ENDLOOP.
ULINE AT : /1(56).
ELSE.
MESSAGE w000(z50871msg).
ENDIF.
ENDFORM. "GET_CUSTOMERDATA
FORM GET_SALESHEADER
FORM get_salesheader.
SET PF-STATUS 'MENU2'.
GET CURSOR FIELD v_fld VALUE v_kunnr.
IF v_fld = 'WA_KNA1-KUNNR'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kunnr
IMPORTING
output = v_kunnr.
SELECT kunnr vbeln erdat audat auart ernam augru
FROM vbak
INTO TABLE it_vbak
WHERE kunnr = v_kunnr.
IF sy-subrc EQ 0.
LOOP AT it_vbak INTO wa_vbak.
WRITE : / sy-vline ,
2(22) wa_vbak-vbeln ,
sy-vline,
27(25) wa_vbak-erdat ,
sy-vline ,
55(15) wa_vbak-audat ,
sy-vline ,
73(15) wa_vbak-auart ,
sy-vline,
91(16) wa_vbak-ernam ,
sy-vline,
109(13) wa_vbak-augru,
123 sy-vline.
HIDE : wa_vbak-vbeln.
CLEAR wa_vbak.
ENDLOOP.
ULINE AT : /1(123).
ELSE.
MESSAGE i015(z50871msg).
ENDIF.
ELSE.
MESSAGE i013(z50871msg).
ENDIF.
ENDFORM. "GET_SALESHEADER
FORM GET_SALESITEMDATA
FORM get_salesitemdata.
SET PF-STATUS space.
GET CURSOR FIELD v_fld VALUE v_vbeln.
IF v_fld = 'WA_VBAK-VBELN'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_vbeln
IMPORTING
output = v_vbeln.
SELECT vbeln posnr matnr charg matkl posar
FROM vbap
INTO TABLE it_vbap
WHERE vbeln = v_vbeln.
LOOP AT it_vbap INTO wa_vbap.
WRITE : /1 sy-vline,
2(13) wa_vbap-posnr ,
sy-vline,
18(18) wa_vbap-matnr ,
sy-vline,
40(13) wa_vbap-charg ,
sy-vline,
56(16) wa_vbap-matkl ,
sy-vline,
75 wa_vbap-posar,
112 sy-vline.
CLEAR wa_vbap.
ENDLOOP.
ULINE AT : /1(112).
ELSE.
MESSAGE i014(z50871msg).
ENDIF.
ENDFORM. "GET_SALESITEMDATA
FORM GET_TOPOFPAGE1
FORM get_topofpage1.
ULINE AT : /1(123).
WRITE : / sy-vline ,
2 text-000 ,
wa_kna1-kunnr ,
75 text-001 ,
wa_kna1-name1,
123 sy-vline.
ULINE AT : /1(123).
WRITE : / sy-vline ,
2(22) text-006 COLOR 1,
sy-vline,
27(25) text-007 COLOR 1 ,
sy-vline ,
55(15) text-008 COLOR 1 ,
sy-vline ,
73(15) text-009 COLOR 1 ,
sy-vline,
91(16) text-010 COLOR 1 ,
sy-vline,
109(13) text-011 COLOR 1,
123 sy-vline.
ULINE AT : /1(123).
ENDFORM. "GET_TOPOFPAGE1
FORM GET_TOPOFPAGE2
FORM get_topofpage2.
ULINE AT : /1(112).
WRITE : / sy-vline ,
2 text-000 ,
wa_kna1-kunnr ,
35 text-001 ,
wa_kna1-name1 ,
85 text-003 ,
wa_vbak-vbeln ,
112 sy-vline.
ULINE AT : /1(112).
WRITE : /1 sy-vline,
2(13) text-012 COLOR 1,
sy-vline,
18(18) text-013 COLOR 1 ,
sy-vline,
40(13) text-014 COLOR 1 ,
sy-vline,
56(16) text-015 COLOR 1 ,
sy-vline,
75 text-016 COLOR 1 ,
112 sy-vline.
ULINE AT : /1(112).
ENDFORM. "GET_TOPOFPAGE2
Thanks,
Naveen.I

Similar Messages

I Need interactive report to list the purchase orders details for a vendor

I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

Interactive and basic lists

Hi Gurus
What are the differences between Interactive and basic lists.When and where we using those.
Regards,
Venkat.

Hi,
Basic list is the first list what we get after we execute a report or program , which will have the list index 0.
The lists what we get in at line selection are called as Interactive lists or detail lists,
we can have maximum of 20 secondray lists(detail lists) and always there will be one basic list (if list is generated)
Cheers,
Babu.

Refresh Classical report/basic list

Hi,
I have created a classical report/basic list where user can select check boxes and adjacent rows should be deleted. But after the action, I wish to refresh the report and remove the selected lines from displaying.
Please let me know how to achieve this.
Thanks in advance.
Nitin

Hi Nitin,
Check the following program.
Here on pressing the delete push button(FCODE: DELETE) it will delete all
rows which has adjacent checkboxes checked.
REPORT ztest_list_processing NO STANDARD PAGE HEADING .
TYPES: BEGIN OF ty_tab,
       delete,
       f1(3) TYPE c,
       f2(3) TYPE c,
       f3(3) TYPE c,
       END OF ty_tab.
DATA: it_tab TYPE TABLE OF ty_tab,
      wa_tab TYPE ty_tab.
DATA: w_delete TYPE c,
      w_lines TYPE i,
      w_ind TYPE i.
wa_tab-f1 = '111'.
wa_tab-f2 = 'ABC'.
wa_tab-f3 = '123'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '222'.
wa_tab-f2 = 'DEF'.
wa_tab-f3 = '456'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '333'.
wa_tab-f2 = 'GHI'.
wa_tab-f3 = '789'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '444'.
wa_tab-f2 = 'JKL'.
wa_tab-f3 = '987'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '555'.
wa_tab-f2 = 'MNO'.
wa_tab-f3 = '654'.
APPEND wa_tab TO it_tab.
SET PF-STATUS '100'. "Contains Delete button
PERFORM print_output.
"Logic which you can implement
AT USER-COMMAND.
CASE sy-ucomm.
    WHEN 'DELETE'.
      DESCRIBE TABLE it_tab LINES w_lines.
      DO w_lines TIMES. "To read all rows
        CLEAR: wa_tab.
        READ LINE w_ind FIELD VALUE wa_tab-delete
                                       wa_tab-f1. "Getting the values
        IF wa_tab-delete EQ 'X'. "Delete when check box is 'X'
          DELETE it_tab WHERE f1 = wa_tab-f1.
        ENDIF.
        ADD 1 TO w_ind."Index for next line
      ENDDO.
      IF it_tab IS INITIAL.
        WRITE: / 'There are no data in the table'.
      ELSE.
        PERFORM print_output. "Reprint the updated data(like refreshing)
      ENDIF.
      "Modified the existing Back button in standard Toolbar so that on
      "pressin the back button it will come to program and not to
      "previous displayed list
    WHEN '&BACK'.
      LEAVE SCREEN.
ENDCASE.
*&      Form print_output
*       text
* --> p1        text
* <-- p2        text
FORM print_output.
LOOP AT it_tab INTO wa_tab.
    WRITE:/ wa_tab-delete AS CHECKBOX INPUT ON, "Display as checkbox
          wa_tab-f1,
          wa_tab-f2,
          wa_tab-f3.
    IF sy-tabix EQ 1.
      w_ind = sy-linno. "Get the line position of first row
    ENDIF.
ENDLOOP.
Hope this helps you.
Regards,
Manoj Kumar P

Dynamic Action based on Interactive Report Select List Value

I'd like to perform a Dynamic Action when a user selects one of 3 options from a Select List within an Interactive Report:
select APEX_ITEM.SELECT_LIST(
p_idx => 3,
--p_value         =>   deptno,
p_list_values => 'Copy;Copy,Delete;Delete,Export to PDF;Export to PDF',
--p_attributes    =>   'style="color:red;"',
p_show_null => 'YES',
p_null_value => NULL,
p_null_text => '--Select--',
--p_item_id       =>   'f03_#ROWNUM#',
p_item_id => 'P6_IR_SELECT_LIST',
p_item_label => 'Label for f03_#ROWNUM#',
p_show_extra => 'YES') "Actions"
from dual;
When building the Dynamic Action, I chose the following values from the Advanced wizard
Event: Select
Selection Type: DOM Object
DOM Object: P6_IR_SELECT_LIST
Condition: Equal to
Value: "Delete"
True Action: Execute Javascript Code: Alert('Here');
Doesn't seem to be firing...can anyone help?
Thanks in advance,
John

Hi,
I am not sure if the "equal to" condition applies to a DOM object... after all, a DOM object can be anything (any HTML element) not only a field.
Try using a javascript expression instead, like this:
$v('P6_IR_SELECT_LIST')=='Delete'UPDATE: Sorry, I just tested and "equal to" condition works for DOM objects... should have tested before posting!
Luis
Edited by: Luis Cabral on Feb 29, 2012 4:45 PM

Interactive Report - Column list of values

The column header list of values feature is great but I think it would benefit from some usability enhancements. Specifically,
1. Say I have a column which has 100s of distinct values. Clearly, I wouldn't want to enable the drop-down list of values (LOV) when I click on the column header. So I choose None for Column Filter List of Values. Yet, when I click on the column header, I get a [text field|http://screencast.com/t/M1SPYdAT] for filtering the (non-existent) values, which is a little misleading.
May I suggest that choosing None should make this text field not appear? As a workaround, I use a user-defined LOV value like select 'Use <img src="/i/ws/action_dropdown.gif"/> to filter' from dual to nudge the user to use the main report menu.
2. When I use the text field in the column heading LOV to narrow down list, Apex performs a "search as you type" query with a "contains" operator.
May I suggest that
a) this should be configurable (i.e. perform a "starts with" query or "contains" query)
b) the search term matched so far should be highlighted in the results
c) when I click on the column header, the text field should automatically get cursor focus so I can start typing without first having to click in the text field
3. When I do use the main report menu to filter a column, is there a way to disable certain operators from the [Operator dropdown list|http://screencast.com/t/3kUwiNEH] ?
For example, I have an indexed column so certain "index-friendly" operators (equality, starting with, less than, greater than, etc) are fine but I would want to disable operators which would not use the index (contains, not like, etc).
4. I have a User Defined List of Values query for a column and the query returns 80 rows. When I click on the column header, only 11 values are displayed in the dropdown. But when I use Filter from the main IR menu and select that column and click on the LOV, all 80 values are shown. The same query is used in both places so I am puzzled as to why they would return different results.
Is there a limitation on the column header LOV, some varchar2(4000) thing maybe?
Thanks

Vikas,
Thank you for the feedback. For issue #1, we are aware of the bug. We should not display the text field if no LOV defined. Hopefully we have the fix by next APEX release. Issue #3 is a great suggestion. We will take a look to enhance that. I am unable to reproduce #4, could you please provide the test case in apex.oracle.com?
Thank you,
Christina

Interactive Reports and menu list translations

Can anyone tell me how to translate the menu items contained in the interactive reports menu list (ie Select Columns, Filter, Sort....) ? I have translated an application into french and when I switch to that language the menu items in the interactive reports are still displayed in english yet the rest of my application is french. The translation file does not contain these items to translate. Can I make these french somehow? Its a pretty powerful tool, but not not if you can't make it language specific. Our french users would not accept this in english.

Hello,
>> Can anyone tell me how to translate the menu items contained in the interactive reports menu list …
The following section of the documentation explains exactly that - http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/global.htm#BABHCAAH .
For complete translation of the IR, you’ll need to translate all the string messages in table 16-4.
Regards,
Arie.
Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

Interactive report code plz

need an interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Check this sample code
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Reward points if useful.

ERROR IN INTERACTIVE REPORT

Hello Rich Heilman,
When i select a basicdata button in secondary list window i am getting the correct screen which i have called. When i select salesdata,mrpdata buttons i have to get their corresponding screens, but i am getting the same basicdata screen until i execute the program.
Kindly help. U can execute the below code and see
REPORT Y_RK_REPORT_TASK2 NO STANDARD PAGE HEADING
                          LINE-SIZE 200
                          LINE-COUNT 25(5).
*&                      I N I T I A L I Z A T I O N                    *
TABLES: MARA,MARC,MARD,MBEW,MVKE,MAKT.
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MARC OCCURS 0,
        MATNR LIKE MARC-MATNR,
       WERKS LIKE MARC-WERKS,
        EKGRP LIKE MARC-EKGRP,
        PSTAT LIKE MARC-PSTAT,
      END OF I_MARC.
DATA: BEGIN OF I_MARD OCCURS 0,
       MATNR LIKE MARD-MATNR,
       LGORT LIKE MARD-LGORT,
       ERSDA LIKE MARD-ERSDA,
       LABST LIKE MARD-LABST,
       WERKS LIKE MARD-WERKS,
      END OF I_MARD.
DATA: BEGIN OF I_MBEW OCCURS 0,
       MATNR LIKE MBEW-MATNR,
       BWKEY LIKE MBEW-BWKEY,
       STPRS LIKE MBEW-STPRS,
       PEINH LIKE MBEW-PEINH,
     END OF I_MBEW.
DATA: BEGIN OF I_MARA OCCURS 0,
       MATNR LIKE MARA-MATNR,
       MTART LIKE MARA-MTART,
       MATKL LIKE MARA-MATKL,
       MEINS LIKE MARA-MEINS,
       MBRSH LIKE MARA-MBRSH,
     END OF I_MARA.
DATA: BEGIN OF I_MVKE OCCURS 0,
       MATNR LIKE MVKE-MATNR,
       VKORG LIKE MVKE-VKORG,
       VTWEG LIKE MVKE-VTWEG,
       VRKME LIKE MVKE-VRKME,
      END OF I_MVKE.
DATA: BEGIN OF I_MAKT OCCURS 0,
       MATNR LIKE MAKT-MATNR,
       SPRAS LIKE MAKT-SPRAS,
       MAKTX LIKE MAKT-MAKTX,
      END OF I_MAKT.
DATA: BEGIN OF I_OUT OCCURS 0,
        MATNR LIKE MARC-MATNR,
        MEINS LIKE MARA-MEINS,
        MBRSH LIKE MARA-MBRSH,
        MATKL LIKE MARA-MATKL,
        MTART LIKE MARA-MTART,
        WERKS LIKE MARD-WERKS,
        EKGRP LIKE MARC-EKGRP,
        PSTAT LIKE MARC-PSTAT,
        LGORT LIKE MARD-LGORT,
        ERSDA LIKE MARD-ERSDA,
        LABST LIKE MARD-LABST,
        BWKEY LIKE MBEW-BWKEY,
        STPRS LIKE MBEW-STPRS,
        PEINH LIKE MBEW-PEINH,
        VKORG LIKE MVKE-VKORG,
        VTWEG LIKE MVKE-VTWEG,
        VRKME LIKE MVKE-VRKME,
        SPRAS LIKE MAKT-SPRAS,
        MAKTX LIKE MAKT-MAKTX,
      END OF I_OUT.
*&             A T - S E L E C T I O N - S C R E E N                   *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR . "OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-101.
PARAMETERS: P_WERKS LIKE MARD-WERKS.
SELECTION-SCREEN END OF BLOCK B2.
*&                  T O P - O F - P A G E                              *
TOP-OF-PAGE.
WRITE: / SY-ULINE.
         SKIP.
WRITE : /84 'MATERIAL MASTER REPORT -- BASIC LIST',
         SY-ULINE.
WRITE: /2 'MATNR',
        22 'MEINS',
        26 'MBRSH',
        31 'MATKL',
        42 'MTART',
        49 'WERKS',
        57 'EKGRP',
        66 'PSTAT',
        76 'LGORT',
        82 'ERSDA',
        92 'LABST',
        107 'BWKEY',
        113 'STPRS',
        126 'PEINH',
        133 'VKORG',
        139 'VRKME',
        144 'VTWEG',
        148 'SPRAS',
        151 'MAKTX'.
*&                  E N D - O F - P A G E                              *
END-OF-PAGE.
WRITE: / SY-ULINE.
    SKIP.
WRITE: /85 'PAGNO: ',SY-PAGNO,
           SY-ULINE.
*&             S T A R T - O F - S E L E C T I O N                     *
START-OF-SELECTION.
SELECT MATNR EKGRP PSTAT FROM MARC INTO
CORRESPONDING FIELDS OF TABLE I_MARC
       WHERE WERKS = P_WERKS AND MATNR IN S_MATNR.
SELECT MATNR MTART MBRSH MEINS MATKL FROM MARA INTO
CORRESPONDING FIELDS OF TABLE I_MARA FOR ALL ENTRIES IN I_MARC
           WHERE MATNR EQ I_MARC-MATNR.
SELECT MATNR SPRAS MAKTX FROM MAKT INTO
CORRESPONDING FIELDS OF TABLE I_MAKT
            FOR ALL ENTRIES IN I_MARC
           WHERE MATNR = I_MARC-MATNR
SELECT MATNR LGORT ERSDA LABST WERKS FROM MARD INTO
CORRESPONDING FIELDS OF TABLE
           I_MARD FOR ALL ENTRIES IN I_MAKT
           WHERE MATNR = I_MAKT-MATNR
           AND WERKS = P_WERKS.
SELECT MATNR BWKEY STPRS PEINH FROM MBEW INTO TABLE I_MBEW
           FOR ALL ENTRIES IN I_MARD
           WHERE MATNR = I_MARD-MATNR.
SELECT MATNR VKORG VTWEG VRKME FROM MVKE INTO TABLE I_MVKE
           FOR ALL ENTRIES IN I_MBEW
          WHERE MATNR = I_MBEW-MATNR.
*&        E N D -- O F -- S E L E C T I O N                           *
END-OF-SELECTION.
LOOP AT I_MARC.
MOVE I_MARC-MATNR TO I_OUT-MATNR.
*MOVE I_MARC-WERKS TO I_OUT-WERKS.
MOVE I_MARC-EKGRP TO I_OUT-EKGRP.
MOVE I_MARC-PSTAT TO I_OUT-PSTAT.
READ TABLE I_MARA WITH KEY MATNR = I_MARC-MATNR.
MOVE I_MARA-MTART TO I_OUT-MTART.
MOVE I_MARA-MBRSH TO I_OUT-MBRSH.
MOVE I_MARA-MEINS TO I_OUT-MEINS.
MOVE I_MARA-MATKL TO I_OUT-MATKL.
READ TABLE I_MAKT WITH KEY MATNR = I_MARC-MATNR.
MOVE I_MAKT-SPRAS TO I_OUT-SPRAS.
MOVE I_MAKT-MAKTX TO I_OUT-MAKTX.
READ TABLE I_MARD WITH KEY MATNR = I_MARC-MATNR.
MOVE I_MARD-LGORT TO I_OUT-LGORT.
MOVE I_MARD-ERSDA TO I_OUT-ERSDA.
MOVE I_MARD-LABST TO I_OUT-LABST.
MOVE I_MARD-WERKS TO I_OUT-WERKS.
READ TABLE I_MBEW WITH KEY MATNR = I_MARC-MATNR.
MOVE I_MBEW-BWKEY TO I_OUT-BWKEY.
MOVE I_MBEW-STPRS TO I_OUT-STPRS.
MOVE I_MBEW-PEINH TO I_OUT-PEINH.
READ TABLE I_MVKE WITH KEY MATNR = I_MARC-MATNR.
MOVE I_MVKE-VKORG TO I_OUT-VKORG.
MOVE I_MVKE-VTWEG TO I_OUT-VTWEG.
MOVE I_MVKE-VRKME TO I_OUT-VRKME.
APPEND I_OUT.
CLEAR I_OUT.
ENDLOOP.
LOOP AT I_OUT.
FORMAT HOTSPOT ON.
WRITE: /2 I_OUT-MATNR,
        22 I_OUT-MEINS,
        26 I_OUT-MBRSH,
        31 I_OUT-MATKL,
        42 I_OUT-MTART,
        49 I_OUT-WERKS,
        57 I_OUT-EKGRP,
        66 I_OUT-PSTAT,
        76 I_OUT-LGORT,
        82 I_OUT-ERSDA,
        92 I_OUT-LABST,
        107 I_OUT-BWKEY,
        113 I_OUT-STPRS,
        126 I_OUT-PEINH,
        133 I_OUT-VKORG,
        139 I_OUT-VRKME,
        144 I_OUT-VTWEG,
        148 I_OUT-SPRAS,
        151 I_OUT-MAKTX.
HIDE I_OUT-MATNR.
FORMAT HOTSPOT OFF.
ENDLOOP.
*&                A T - L I N E - S E L E C T I O N                    *
AT LINE-SELECTION.
SET PF-STATUS 'SELECTION'.
CASE SY-LSIND.
WHEN 1.
SELECT MATNR LGORT ERSDA LABST WERKS FROM MARD
   INTO TABLE I_MARD WHERE MATNR = I_OUT-MATNR
   AND WERKS = P_WERKS.
IF SY-SUBRC = 0.
      LOOP AT I_MARD.
        WINDOW STARTING AT 20 60.
        WRITE:/ 'MATERIAL NUMBER:'.
        WRITE: I_MARD-MATNR.
        WRITE:/ 'PLANT:'.
        WRITE: I_MARD-WERKS.
        WRITE:/ 'STORAGE LOCATION:' .
        WRITE: I_MARD-LGORT.
        SKIP.
      ENDLOOP.
ELSE.
     MESSAGE E000(1)
         WITH 'PLEASE SELECT PLANT WHICH YOU GIVEN IN SELECTON'.
ENDIF.
ENDCASE.
*&                A T - U S E R - C O M M O N D                        *
AT USER-COMMAND.
CASE SY-UCOMM.
   WHEN 'EXIT'.
   LEAVE PROGRAM.
   WHEN 'BASICDATA'.
      PERFORM BASIC.
   WHEN 'SALESDATA'.
     perform SALES.
   WHEN 'MRPDATA'.
     perform MRP.
ENDCASE.
FORM BASIC
FORM BASIC.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=AUSW'.
perform bdc_field       using 'RMMG1-MATNR'
                              I_OUT-MATNR.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              'X'.
perform bdc_transaction using 'MM03'.
ENDFORM.
FORM SALES
FORM SALES.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=AUSW'.
perform bdc_field       using 'RMMG1-MATNR'
                              I_OUT-MATNR.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(04)'
                              'X'.
perform bdc_dynpro      using 'SAPLMGMM' '0080'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-WERKS'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'RMMG1-WERKS'
                              '3000'.
perform bdc_transaction using 'MM03'.
ENDFORM.
FORM MRP
FORM MRP.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=AUSW'.
perform bdc_field       using 'RMMG1-MATNR'
                              I_OUT-MATNR.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(06)'
                              'X'.
perform bdc_dynpro      using 'SAPLMGMM' '0080'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-LGORT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'RMMG1-WERKS'
                              '3000'.
perform bdc_field       using 'RMMG1-LGORT'
                              '0001'.
perform bdc_transaction using 'MM03'.
ENDFORM.
FORM BDC_TRANSACTION *
FORM bdc_transaction USING tcode.
CALL TRANSACTION tcode USING bdcdata MODE 'E'.
ENDFORM.
FORM BDC_DYNPRO *
--> PROGRAM *
--> DYNPRO *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.
Insert field *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM.
Thanks and Regards
seenu

I think you are missing the step to clear the bdcdata. Please add the clear and refresh here..
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'BASICDATA'.
clear bdcdata. refresh bdcdata.
PERFORM BASIC.
WHEN 'SALESDATA'.
clear bdcdata. refresh bdcdata.
perform SALES.
WHEN 'MRPDATA'.
clear bdcdata. refresh bdcdata.
perform MRP.
ENDCASE.
Regards,
Rich Heilman

Alv interactive report for secondary list

Hi All,
This is my code for ALV interactive report. Its working Properly for me when i select material number iam able to display the secondary list properly . if i sorted the basic list other than material number for ex . created date . iam uable to display correct secondary list . Can any one help me in this issue?
REPORT ZWRLOMDMM_PMG_PHWEB_PLD   NO STANDARD PAGE HEADING
        LINE-SIZE 120
        LINE-COUNT 65
        MESSAGE-ID 00.
TABLES                                                              *
TABLES: MARA ,      "General Material Data
        ZWPBPH.     " Published Product Hierarchy
TYPE-POOLS                                                          *
TYPE-POOLS:SLIS .
DATA:FIELDCATALOG_BASIC TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
     FIELDCATALOG_SECONDARY TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
     GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
     GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
     GD_REPID LIKE SY-REPID.
INTERNAL TABLES                                                     *
*Internal Tables to Get Data.
*Internal Table For MARA Table.
DATA:BEGIN OF T_MARA OCCURS 0 ,
        MATNR LIKE MARA-MATNR,
        MTART LIKE MARA-MTART,
        ERSDA LIKE MARA-ERSDA,
        ERNAM LIKE MARA-ERNAM,
        AENAM LIKE MARA-AENAM,
        SPART LIKE MARA-SPART,
     END OF T_MARA.
*Internal Table For ZWPBPH Table.
DATA:BEGIN OF T_ZWPBPH OCCURS 0 ,
       PBPINO LIKE ZWPBPH-PBPINO,
       PBPAPINO LIKE ZWPBPH-PBPAPINO,
     END OF T_ZWPBPH.
*Internal Table For Basic List Field Catalog.
DATA:BEGIN OF T_ALV OCCURS 0 ,
       MATNR LIKE MARA-MATNR,
       MTART LIKE MARA-MTART,
       ERSDA LIKE MARA-ERSDA,
       ERNAM LIKE MARA-ERNAM,
       SPART LIKE MARA-SPART,
       SPART1(3),
     END OF T_ALV.
*Internal Table For Secondary List Field Catalog.
DATA: BEGIN OF T_ALVS OCCURS 0 ,
        MATNR LIKE MARA-MATNR,
        AENAM LIKE MARA-AENAM,
        LAEDA LIKE MARA-LAEDA,
      END OF T_ALVS.
*Internal Table For Model
DATA:T_MODEL LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
*Internal Table For Product
DATA:T_PRODUCT LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
*Internal Table For Family
DATA:T_FAMILY LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
*Internal Table For Line
DATA:T_LINE LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
*Internal Table For Type
DATA:T_TYPE LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
SELECTION SCREEN                                                    *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: P_MATN RADIOBUTTON GROUP R1 USER-COMMAND run default 'X'.
SELECT-OPTIONS: P_MATNR FOR MARA-MATNR MODIF ID SC1 .
PARAMETERS: P_DAT RADIOBUTTON GROUP R1 .
SELECT-OPTIONS: : P_DATE FOR MARA-LAEDA MODIF ID SC2.
PARAMETERS: P_DIV RADIOBUTTON GROUP R1 .
SELECT-OPTIONS: : P_DIVIS for mara-spart MODIF ID SC3.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION                                                      *
INITIALIZATION.
REFRESH: T_MARA,
           T_ZWPBPH,
           T_ALV,
           T_ALVS,
           T_MODEL,
           T_PRODUCT,
           T_FAMILY,
           T_LINE,
           T_TYPE.
CLEAR:   T_MARA,
           T_ZWPBPH,
           T_ALV,
           T_ALVS,
           T_MODEL,
           T_PRODUCT,
           T_FAMILY,
           T_LINE,
           T_TYPE.
GD_REPID = SY-REPID.
*AT SELECTION-SCREEN OUTPUT.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF P_MATN = 'X'.
      FREE : P_DIVIS,P_DATE.
      IF SCREEN-GROUP1 = 'SC2' or SCREEN-GROUP1 = 'SC3'.
        SCREEN-INPUT = 0.
        MODIFY SCREEN.
        CONTINUE.
      ENDIF .
    ENDIF.
    IF P_DAT = 'X'.
      FREE : P_MATNR,P_DIVIS.
      IF SCREEN-GROUP1 = 'SC1' or SCREEN-GROUP1 = 'SC3'.
        SCREEN-INPUT = 0.
        MODIFY SCREEN.
        CONTINUE.
      ENDIF .
    ENDIF.
    IF P_DIV = 'X'.
      FREE : P_DATE,P_MATNR.
      IF SCREEN-GROUP1 = 'SC1' or SCREEN-GROUP1 = 'SC2'.
        SCREEN-INPUT = 0.
        MODIFY SCREEN.
        CONTINUE.
      ENDIF .
    ENDIF.
ENDLOOP.
START-OF-SELECTION                                                  *
START-OF-SELECTION.
PERFORM GET_FIELDCATALOG_BASIC.
PERFORM GET_FIELDCATALOG_SECONDARY.
PERFORM POPULATE_DATA.
END-OF-SELECTION                                                    *
END-OF-SELECTION.
*&      FORM GET_FIELDCATALOG_BASIC.
Get Fieldcatalog For Basic List
FORM GET_FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'MATNR'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Material Number'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 20.
FIELDCATALOG_BASIC-HOTSPOT   = 'X'.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'MTART'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Material Type'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 20.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'ERSDA'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Created Date'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 12.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'ERNAM'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Created By'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 15.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'SPART'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Division PMG'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 14.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'SPART1'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Division PhWEB'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 14.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
ENDFORM.                    "GET_FIELDCATALOG_BASIC
*&      FORM GET_FIELDCATALOG_SECONDARY
Get Fieldcatalog For Secondary List
FORM GET_FIELDCATALOG_SECONDARY.
FIELDCATALOG_SECONDARY-FIELDNAME = 'MATNR'.
FIELDCATALOG_SECONDARY-SELTEXT_M = 'Material Number'.
FIELDCATALOG_SECONDARY-COL_POS   = 0.
FIELDCATALOG_SECONDARY-OUTPUTLEN = 20.
FIELDCATALOG_SECONDARY-EMPHASIZE = 'X'.
FIELDCATALOG_SECONDARY-KEY       = 'X'.
APPEND FIELDCATALOG_SECONDARY TO FIELDCATALOG_SECONDARY.
CLEAR FIELDCATALOG_SECONDARY.
FIELDCATALOG_SECONDARY-FIELDNAME = 'AENAM'.
FIELDCATALOG_SECONDARY-SELTEXT_M = 'Changed By'.
FIELDCATALOG_SECONDARY-COL_POS   = 0.
FIELDCATALOG_SECONDARY-OUTPUTLEN = 20.
FIELDCATALOG_SECONDARY-EMPHASIZE = 'X'.
FIELDCATALOG_SECONDARY-KEY       = 'X'.
APPEND FIELDCATALOG_SECONDARY TO FIELDCATALOG_SECONDARY.
CLEAR FIELDCATALOG_SECONDARY.
FIELDCATALOG_SECONDARY-FIELDNAME = 'LAEDA'.
FIELDCATALOG_SECONDARY-SELTEXT_M = 'Changed ON'.
FIELDCATALOG_SECONDARY-COL_POS   = 0.
FIELDCATALOG_SECONDARY-OUTPUTLEN = 20.
FIELDCATALOG_SECONDARY-EMPHASIZE = 'X'.
FIELDCATALOG_SECONDARY-KEY       = 'X'.
APPEND FIELDCATALOG_SECONDARY TO FIELDCATALOG_SECONDARY.
CLEAR FIELDCATALOG_SECONDARY.
ENDFORM.                    "GET_FIELDCATALOG_SECONDARY
*&      FORM POPULATE_DATA
FORM POPULATE_DATA.
*Get Data From MARA And ZWPBPH Tables
IF P_MATN = 'X'.
SELECT MATNR MTART ERSDA ERNAM AENAM SPART FROM MARA INTO TABLE T_MARA
where MATNR IN P_MATNR .
    IF SY-SUBRC <> 0.
      MESSAGE E001(0) WITH 'Invalid Material Number'.
    ENDIF.
ELSEIF P_DAT = 'X'.
SELECT MATNR MTART ERSDA ERNAM AENAM SPART FROM MARA INTO TABLE T_MARA
where LAEDA IN P_DATE .
    IF SY-SUBRC <> 0.
      MESSAGE E001(0) WITH 'Invalid Date Range'.
    ENDIF.
ELSEIF P_DIV = 'X'.
SELECT MATNR MTART ERSDA ERNAM AENAM SPART FROM MARA INTO TABLE T_MARA
where SPART IN P_DIVIS .
    IF SY-SUBRC <> 0.
      MESSAGE E001(0) WITH 'Invalid Division'.
    ENDIF.
ELSEIF P_MATN = ' ' AND P_DAT = ' ' AND P_DIV = ' '.
SELECT MATNR MTART ERSDA ERNAM AENAM SPART FROM MARA INTO TABLE T_MARA.
ENDIF.
DELETE ADJACENT DUPLICATES FROM T_MARA COMPARING MATNR.
SORT T_MARA BY MATNR.
IF T_MARA[] IS NOT INITIAL .
SELECT PBPINO PBPAPINO FROM ZWPBPH INTO TABLE T_ZWPBPH FOR ALL ENTRIES
IN T_MARA WHERE PBPINO = T_MARA-MATNR.
ENDIF.
IF SY-SUBRC = 0.
    LOOP AT T_ZWPBPH.
      SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_MODEL   WHERE
      PBPINO = T_ZWPBPH-PBPAPINO.
      IF SY-SUBRC = 0.
      SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_PRODUCT   WHERE
      PBPINO
      = T_MODEL-PBPAPINO.
      ENDIF.
      IF SY-SUBRC = 0.
       SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_FAMILY   WHERE
       PBPINO = T_PRODUCT-PBPAPINO.
      ENDIF.
      IF SY-SUBRC = 0.
        SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_LINE   WHERE
        PBPINO = T_FAMILY-PBPAPINO.
      ENDIF.
      IF SY-SUBRC = 0.
   SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_TYPE   WHERE PBPINO
    = T_LINE-PBPAPINO.
      ENDIF.
      IF SY-SUBRC = 0.
     SELECT SINGLE MTART ERSDA ERNAM SPART FROM MARA INTO CORRESPONDING
      FIELDS OF T_ALV WHERE MATNR = T_ZWPBPH-PBPINO AND SPART <>
    T_TYPE-PBPAPINO+1(2).
      ENDIF.
      IF SY-SUBRC = 0.
        MOVE T_ZWPBPH-PBPINO TO T_ALV-MATNR.
        MOVE T_TYPE-PBPAPINO+1(2) TO T_ALV-SPART1.
        APPEND T_ALV.
        SELECT SINGLE MATNR AENAM LAEDA FROM MARA INTO CORRESPONDING
        FIELDS OF T_ALVS WHERE MATNR = T_ZWPBPH-PBPINO.
        APPEND T_ALVS.
        CLEAR T_ALVS.
      ENDIF.
    ENDLOOP.
ENDIF.
SORT T_ALV BY MATNR.
SORT T_ALVS BY MATNR.
call function 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = GD_REPID
      i_callback_user_command = 'DISPLAY_DETAIL'
      it_fieldcat             = FIELDCATALOG_BASIC[]
      i_save                  = 'X'
    TABLES
      t_outtab                = T_ALV
    EXCEPTIONS
      program_error           = 1
      others                  = 2.
ENDFORM.                    "POPULATE_DATA
*&      Form DISPLAY_DETAIL
      text
     -->UCOMM      text
     -->SELFIELD   text
FORM DISPLAY_DETAIL USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
Select Material Number For Secondary List
DATA: T_ALV_TEMP LIKE T_ALVS OCCURS 0 WITH HEADER LINE.
IF UCOMM = '&IC1'.
    READ TABLE T_ALVS INDEX SELFIELD-TABINDEX.
    IF SY-SUBRC = 0.
      MOVE T_ALVS TO T_ALV_TEMP.
      APPEND T_ALV_TEMP.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program = GD_REPID
        it_fieldcat        = FIELDCATALOG_SECONDARY[]
      TABLES
        t_outtab           = T_ALV_TEMP.
ENDIF.
ENDFORM.                    "DISPLAY_DETAIL

Hi,
Try this in the routine display details
READ TABLE T_ALV INDEX SELFIELD-TABINDEX.
READ TABLE T_ALVS with key matnr = T_ALV-MATNR
thanks

How to create more than 21 lists in interactive reports

hello everyone,
I am new to ABAP as well as this site. Kindly help, I want to know how to create more than 21 lists in interactive reports.
Also, how can i create them without using WHEN 1, wHEN 2 and so on...
Kindly help.
thank you

Hello,
Using Intracive Reports its not possible to cretate more than 21 lists.
But its possible to create more than 21 using ALV concept.
for sample ALV u can serch in SDN.
Regards,
Anil.

Interactive Report question - report list question

Hi!
I was wondering if I turn off the option to show report as tabs is there a possibility to make another page with list of reports created by current logged in user with an option to click on the name of the report and the IR region shows the saved report?
With regards,
PsmakR

Hi Imran,
Basically we can have one basic list and 20 interactive lists.
Once when we reached to 20th list then it goes to shortdump.
So, inorder to avoid that we can modify the system field
SY-LSIND.
Just see this example and try this. I hope this will be useful for you.
REPORT ZSAMPLE1111.
data: begin of itab occurs 0,
        matnr like mara-matnr,
        mtart like mara-mtart,
        mbrsh like mara-mbrsh,
        end of itab.
data: begin of jtab occurs 0,
      maktx like makt-maktx,
      spras like makt-spras,
      end of jtab.
select matnr mtart mbrsh into table itab from mara up to 10 rows.
loop at itab.
write:/ itab-matnr, itab-mtart, itab-mbrsh.
hide itab-matnr.
endloop.
at line-selection.
select maktx spras into table jtab from makt where spras = 'EN' .
case sy-lsind.
when '1'.
loop at jtab.
write:/ jtab-maktx, jtab-spras.
endloop.
when '20'.             * changes see here.
sy-lsind = 1.
when others .
write:/ 'name',sy-lsind.
endcase.
I hope this will be helpful for you.
<REMOVED BY MODERATOR>
Cheers,
Swamy kunche
Edited by: Alvaro Tejada Galindo on Apr 15, 2008 4:01 PM

LINKING BETWEEN FUNCTION MODULE AND INTERACTIVE NO. OF BASIC LIST

Dear Mates,
Iam preparing Z report for BOM display of FG and SFG materials.
Iam displaying the Basic List using the MAST table. Here i double click on the material no.
Here iam using the function module :CS_BOM_EXPL_MAT_V2 for fetching the data from STPOX structure ,here i want to link material no. which has been from basic list and the above said function module.
Can anybody provide the solution for the above said linking in ALV interactive report.
Please treat it very urgent as this report is to be presented on high priority.
Thanks in advance
Subbu

Hi
use the Function module REUSE_ALV_POPUP_TO_SELECT.
check the below example:
REPORT ZSR_ALV_INTERACTIVE.
TABLES : LFA1,EKKO,EKPO.
SELECT-OPTIONS : VENDOR FOR LFA1-LIFNR.
DATA : BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF ITAB.
DATA : BEGIN OF JTAB OCCURS 0,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
END OF JTAB.
DATA : BEGIN OF KTAB OCCURS 0,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF KTAB.
TYPE-POOLS : SLIS.
DATA : REPID LIKE SY-REPID.
DATA :LFA1_B TYPE SLIS_T_FIELDCAT_ALV,
LFA1_W TYPE SLIS_FIELDCAT_ALV,
EKKO_B TYPE SLIS_T_FIELDCAT_ALV,
EKKO_W TYPE SLIS_FIELDCAT_ALV,
EKPO_B TYPE SLIS_T_FIELDCAT_ALV,
EKPO_W TYPE SLIS_FIELDCAT_ALV,
EVENTS_B TYPE SLIS_T_EVENT,
EVENTS_W TYPE SLIS_ALV_EVENT.
PERFORM GET_VAL.
REPID = SY-REPID.
SELECT LIFNR NAME1 FROM LFA1 INTO TABLE ITAB WHERE LIFNR IN VENDOR.
*perform val USING USER_COMMAND sel.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
IT_FIELDCAT = LFA1_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = ITAB.
*& Form GET_VAL
text this is to put column headings
FORM GET_VAL.
LFA1_W-FIELDNAME = 'LIFNR'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'LIFNR'.
APPEND LFA1_W TO LFA1_B.
LFA1_W-FIELDNAME = 'NAME1'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'NAME1'.
APPEND LFA1_W TO LFA1_B.
EKKO_W-FIELDNAME = 'EBELN'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'EBELN'.
APPEND EKKO_W TO EKKO_B.
EKKO_W-FIELDNAME = 'AEDAT'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'AEDAT'.
APPEND EKKO_W TO EKKO_B.
EKPO_W-FIELDNAME = 'EBELP'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'EBELP'.
APPEND EKPO_W TO EKPO_B.
EKPO_W-FIELDNAME = 'MATNR'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'MATNR'.
APPEND EKPO_W TO EKPO_B.
EVENTS_W-NAME = 'USER_COMMAND'.
EVENTS_W-FORM = 'VAL'.
APPEND EVENTS_W TO EVENTS_B.
ENDFORM. "GET_VAL
*& Form VAL
text
-->USER_COMMANtext
-->SEL text for retrieving data
FORM VAL USING USER_COMMAND LIKE SY-UCOMM SEL TYPE SLIS_SELFIELD.
DATA : VEN(10) TYPE N,
PO(10) TYPE N.
DATA : MAT(10) TYPE C.
IF SEL-FIELDNAME = 'LIFNR'.
VEN = SEL-VALUE.
SELECT EBELN AEDAT FROM EKKO INTO TABLE JTAB WHERE LIFNR = VEN.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
I_STRUCTURE_NAME = EKKO_B
IT_FIELDCAT = EKKO_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = JTAB.
ENDIF.
IF SEL-FIELDNAME = 'EBELN'.
PO = SEL-VALUE.
SELECT EBELP MATNR FROM EKPO INTO TABLE KTAB WHERE EBELN = PO.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
I_TITLE = 'ITEM DETAILS'
I_TABNAME = 'EKPO'
IT_FIELDCAT = EKPO_B
I_CALLBACK_PROGRAM = REPID
IMPORTING
ES_SELFIELD = SEL
TABLES
T_OUTTAB = KTAB.
ENDIF.
logic to select a record
IF SEL-FIELDNAME = 'MATNR'.
MAT = SEL-VALUE.
SET PARAMETER ID 'MAT' FIELD MAT.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM. "VAL
check my example:
REPORT ZSR_ALV_INTERACTIVE.
TABLES : LFA1,EKKO,EKPO.
SELECT-OPTIONS : VENDOR FOR LFA1-LIFNR.
DATA : BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF ITAB.
DATA : BEGIN OF JTAB OCCURS 0,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
END OF JTAB.
DATA : BEGIN OF KTAB OCCURS 0,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF KTAB.
TYPE-POOLS : SLIS.
DATA : REPID LIKE SY-REPID.
DATA :LFA1_B TYPE SLIS_T_FIELDCAT_ALV,
LFA1_W TYPE SLIS_FIELDCAT_ALV,
EKKO_B TYPE SLIS_T_FIELDCAT_ALV,
EKKO_W TYPE SLIS_FIELDCAT_ALV,
EKPO_B TYPE SLIS_T_FIELDCAT_ALV,
EKPO_W TYPE SLIS_FIELDCAT_ALV,
EVENTS_B TYPE SLIS_T_EVENT,
EVENTS_W TYPE SLIS_ALV_EVENT.
PERFORM GET_VAL.
REPID = SY-REPID.
SELECT LIFNR NAME1 FROM LFA1 INTO TABLE ITAB WHERE LIFNR IN VENDOR.
*perform val USING USER_COMMAND sel.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
IT_FIELDCAT = LFA1_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = ITAB.
*& Form GET_VAL
text this is to put column headings
FORM GET_VAL.
LFA1_W-FIELDNAME = 'LIFNR'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'LIFNR'.
APPEND LFA1_W TO LFA1_B.
LFA1_W-FIELDNAME = 'NAME1'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'NAME1'.
APPEND LFA1_W TO LFA1_B.
EKKO_W-FIELDNAME = 'EBELN'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'EBELN'.
APPEND EKKO_W TO EKKO_B.
EKKO_W-FIELDNAME = 'AEDAT'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'AEDAT'.
APPEND EKKO_W TO EKKO_B.
EKPO_W-FIELDNAME = 'EBELP'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'EBELP'.
APPEND EKPO_W TO EKPO_B.
EKPO_W-FIELDNAME = 'MATNR'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'MATNR'.
APPEND EKPO_W TO EKPO_B.
EVENTS_W-NAME = 'USER_COMMAND'.
EVENTS_W-FORM = 'VAL'.
APPEND EVENTS_W TO EVENTS_B.
ENDFORM. "GET_VAL
*& Form VAL
text
-->USER_COMMANtext
-->SEL text for retrieving data
FORM VAL USING USER_COMMAND LIKE SY-UCOMM SEL TYPE SLIS_SELFIELD.
DATA : VEN(10) TYPE N,
PO(10) TYPE N.
DATA : MAT(10) TYPE C.
IF SEL-FIELDNAME = 'LIFNR'.
VEN = SEL-VALUE.
SELECT EBELN AEDAT FROM EKKO INTO TABLE JTAB WHERE LIFNR = VEN.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
I_STRUCTURE_NAME = EKKO_B
IT_FIELDCAT = EKKO_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = JTAB.
ENDIF.
IF SEL-FIELDNAME = 'EBELN'.
PO = SEL-VALUE.
SELECT EBELP MATNR FROM EKPO INTO TABLE KTAB WHERE EBELN = PO.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
I_TITLE = 'ITEM DETAILS'
I_TABNAME = 'EKPO'
IT_FIELDCAT = EKPO_B
I_CALLBACK_PROGRAM = REPID
IMPORTING
ES_SELFIELD = SEL
TABLES
T_OUTTAB = KTAB.
ENDIF.
logic to select a record
IF SEL-FIELDNAME = 'MATNR'.
MAT = SEL-VALUE.
SET PARAMETER ID 'MAT' FIELD MAT.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM. "VAL

Interactive reports list

 Reports: I want to jump from 2nd detail list to 10th list. Is it possible? How?
 Suppose Iam in 10th list , I want to move to 3nd list directly? How?

Hi
Interactive Reports
As the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers.
And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.
We can have a basic list (number starts from 0) and 20 secondary lists (1 to 21).
Events associated with Interactive Reports are:
AT LINE-SELECTION
AT USER-COMMAND
AT PF<key>
TOP-OF-PAGE DURING LINE-SELECTION.
HIDE statement holds the data to be displayed in the secondary list.
sy-lisel : contains data of the selected line.
sy-lsind : contains the level of report (from 0 to 21)
Interactive Report Events:
AT LINE-SELECTION : This Event triggers when we double click a line on the list, when the event is triggered a new sublist is going to be generated. Under this event what ever the statements that are been return will be displayed on newly generated sublist.
AT PFn: For predefined function keys...
AT USER-COMMAND : It provides user functions keys.
TOP-OF-PAGE DURING LINE-SELECTION :top of page event for secondary list.
MAX we can go for 20 SECONDARY LIST AND ONE BASIC LIST TOTAL 21
sy-lsind EQ 5.
sy-lsind = 9.
endif.
Ex:
REPORT demo_list_interactive_2 .
START-OF-SELECTION.
WRITE: 'Basic List, SY-LSIND =', sy-lsind.
AT LINE-SELECTION.
IF sy-lsind = .5
sy-lsind = 9.
ENDIF.
WRITE: 'Secondary List, SY-LSIND =', sy-lsind.
I just gave an example at this link for filling and retrieving data to a text editor.
Save the text from Text Editor to customised table
reward if usefull.

How to Create Interactive report lists for the gross sales, credit ....

How to Create Interactive report lists for the gross sales, credit returns, and gross weight for the customer for the current year and comparing the same with that of the previous year for the same period.....
plz tell me steps to accomplish this....plz ...give me the detail description..plz......many many thnx in advance...

Hi raja,
Display a checkbox , customer number on the basic list and also set a GUI STATUS on the basic list.....
Select the customer by checking the checkbox and click on the button you create in the GUI status....
Write the desired code to be displayed in
AT USER-COMMAND even checking the sy-ucomm....
so this would make you to into interactive list...
Hope this would help you.
Regards
Narin Nandivada

Interactive report basic list concept

Similar Messages

Maybe you are looking for