Interactive report row-level ("OR") filter via URL?

I know you can perform a column level filter on an Interactive Report via URL, but can you do a row level filter?
I want to do something like where column 1 = 'test' OR column 2 = 'test', not column 1= 'test AND column 2 = 'test'.
Thank you and apologies if I am missing something in the documentation or other forum messages.

Jeff,
Thanks again for the response and for looking into it. However, if I am not mistaken, the url in that excerpt does the same thing as the URL I posted except that you used IREQ_COLNAME instead of IR_COLNAME (which defaults to EQ I believe).
I want to see if a value is in column a OR column b, etc. The "OR" is the all important caveat.
I would settle for being able to pass a value to the IR's main search box (that searches all columns of all rows) if I cannot do a targeted row level filter on a few select columns.
If anyone knows how to do either of those things, that would be great information to have.
Thanks,

Similar Messages

Interactive Report row filter item aliases

When trying to use row filtering on an interactive report that selects over 100 items, the aliases are alphabetic for the report columns but once they get as high as FZ they stop and are all aliased as \\ and become unusable. Is this a limitation in the IR?? Has anyone gotten around this???
Thanks,
Andrew

Jeff,
Thanks again for the response and for looking into it. However, if I am not mistaken, the url in that excerpt does the same thing as the URL I posted except that you used IREQ_COLNAME instead of IR_COLNAME (which defaults to EQ I believe).
I want to see if a value is in column a OR column b, etc. The "OR" is the all important caveat.
I would settle for being able to pass a value to the IR's main search box (that searches all columns of all rows) if I cannot do a targeted row level filter on a few select columns.
If anyone knows how to do either of those things, that would be great information to have.
Thanks,

IR (interactive report) Rows found: 1 + No data found on deep linking

I am using a deep linking to a page with interactive report on it with following URL: http://...../f?p=my_app_id:target_page::::target_page:param1, param2:param1_value, param2_value
After login, I arrive on the page wit "No data found" message in the report region.
Clicking on "Session" link, I see that app/page variables are set. Passing in debug mode, I see"Printing rows. Row window: 1-15. Rows found: 1" right before "No data found" message.
If I use the select with values, I get several lines of result.
has anyone fell on this problem and solved it?
Igor

OK, solved :o)))
Inside the package function returning URL to call, I insert a row into the table to query and I return its sequence number. The function is launched by an application outside APEX.
So, if I don't make commit immediately before returning URL, APEX sees nothing.
I have added a commit before returning from the function and now everything is OK.

Update interactive report according to the filter of the user

Hi all
i'm working with Apex version 4.2/
i have an interactive rport page as we know it allows the user to make filtering ans sorting
I want to do as follow :
i created an interactive report in table
CREATE TABLE EMP
EMPNO     NUMBER(4)                           NOT NULL,
ENAME     VARCHAR2(10 BYTE),
JOB       VARCHAR2(9 BYTE),
MGR       NUMBER(4),
HIREDATE DATE,
SAL       NUMBER(7,2),
COMM      NUMBER(7,2),
DEPTNO    NUMBER(2))
ALTER TABLE EMP ADD (
PRIMARY KEY
(EMPNO)now i've created a new region called update_all_region with two text field items.
p30_sal
p30_deptno
and an update_all button .lets take a look at the scenario :
lets say that the user doing sort on the IRR lets say give all the employees where the sal >10000.
lets say that the report return 100 rows to the result , result per page : 50.
now i'm entering in the update_all_region text field item the values :
p30_sal : 90000
p30_deptno : 30 and pressing the update_all button .i want that all the rows which appears in the report (total = 100) will be update.
i've tried to do this :
begin
FOR i IN 1..APEX_APPLICATION.G_F02.COUNT
LOOP
update emp
set salary = :p30_salary ,
deptno= :p30_deptno
where employee_id = apex_application.g_f02(i);
END LOOP;
commit;
end;problem :
this update only updates the 50 rows in the current page that i'm in it. and not the all 100 .
question :
is this the correct way to do this update , form whatt i've understood , i can take the object filter as a variable , and use it in order to update the table.
please you advice
Thanks In Advanced
Naama

Either write a classic report and implement your own filters, and use those on your update function, or try to retrieve the where clause Apex uses in the IR.
This blog from Stew should help you on your way:
http://stewstools.wordpress.com/2009/02/19/get-ir-where-clause/

Set Form Values From Interactive Report Row

Using Apex 4.2.
I have two tables: T1 and T2
Table T1 contains five columns: CT11, CT12, CT13, CT14, CT15
Table T2 contains 4 columns: CT21, CT22, CT23, CT24
I have a page with two regions. Region 1 is a Form on a Table using table T1. Region 2 is an Interactive Report ( IR ) on table T2.
The SQL for region 2 is: select apex_item.RADIOGROUP(p_idx => 1, p_value => CT21) "Choose", CT22, CT23, CT24 from T2;
When the user clicks a radio button for a row in the Interactive Report, I would like the values in the IR cells CT22, CT23, CT24 to populate the CT13, CT14, CT15 fields in the table form in region 1. If a user clicks another row radio button, the values should update.
Any help is greatly appreciated. Thanks!

Hi,
As per my understanding ur requirement is as below.
When the user clicks the 'Link Column' it should redirect to another page with the value of id, Day, Start Time, and End Time.
Hope all the cloumns are from the same table.
As Denes said, it is enought to pass the ID value to the link column as of below.
ie., u can modify ur query as of below.
SELECT Last Name,First Name,Day,Start Time,End Time, ID as "Link Column"
FROM t.
Now u can pass the value as #Link Column# which will pass the ID value to the next page.
Hope my understanding is correct.

Displaying an interactive report row using two lines

Is there a way to take a report row from an interactive report that has too many columns for one display row and display using 2 rows? This would minimize the amount of scrolling the user would then need to do.
Thanks in advance!

Hi,
I dont think we can show a single row as two lines in an interactive report but if you use a classic report instead of interactive then you can do that by creating your own custom report template from scratch and selecting templete type as Named Column (row template) and show the row in what ever way you need...any way if you find any solution for interactive report just post your solution here which will help me too
Thanks,
Mahesh

Display interactive report rows based on user role.

Hello,
Can anyone please help me out with this issue. i have an interactive report and now i want to make this report as conditional based on user role. Like i want to dispaly all the report rows for an Admin user role and for a developer I want the report to display only his/her rows. Can anyone please help me how can I resolve this issue.
Do I need to have two separate reports for each role or can we make achieve this with only one report.
thanks,
Orton

Here is a possible answer.. Build your Interactive report off of a collection. And when you build the collection you can build an if statement to either build your select with or without the filtering of user_id..
See this blog entry for how to build a interactive report from a collection: http://www.oracleapplicationexpress.com/tutorials/71-oracle-apex-interactive-report-based-on-plsql-function
Thank you,
Tony Miller
Webster, TX

Apex 3.1, Interactive Report Row Text Search, image bitmap as TEXT?

I think this IR thing is powerful which could save me lots of time in development.
One question: does the row text search(default: all columns) treat image column as regular text(string)? I did the following search on:
SAMPLE APPLICATION-->Products, I put 300 in the search column( for $300 list-price search), the search produces 3 lines( should only have 2). the 3rd line's list price is $1999, I looked it in SQL*PLUS and saw its image bitmap (long string) includes a "300" inside, so I believe the "default all columns search" treat image as regular string.
How can I avoid the image bitmap search included in IR? This bitmap strings are very long for each image and can EASILY match searching conditions for something like PRODOUCT DESCRIPTION, PRODUCT PRICE for our products data( about 25000)? thanks
sean

Sean / Russell,
Thanks for reporting this, it's certainly a bug.
By the way, the search is performed in SQL, on whatever column values are being displayed (run the page in debug mode to see the full SQL). So in the case of the sample application, it is not matching the image bitmap, but the image size, which is selected in the SQL. The bug is that the full search should not include columns which have filtering disabled or one of the special image format masks. We'll try to fix this for an upcoming patch.
Thanks,
Marco

Interactive report URL syntax

Hi
I'm using Apex 3.1.2, and am fairly new to using Interactive reports. I've found the URL syntax to apply a filter on an IR, and was just wondering if it is possible to apply a sort, or even open a saved report from a URL link? I am well aware that I can work around it (using different pages with a sort pre-applied etc) but was hoping that I could do everything on one page.
Thanks!
-Marc

Hi Marc,
I just read over the document and it doesn't appear that we can do it via the URL, however you may be able to do this using JS.
Try this (I did this as a test on the emp table)
//Send filter request
var get = new htmldb_Get(null,$v('pFlowId'),'APXWGT',$v('pFlowStepId'));
get.addParam('f01','EMPNO');
get.addParam('f01','=');
get.addParam('f01','7369');
get.addParam('f01','');
get.addParam('f01','minutes');
get.addParam('p_widget_action','FILTER');
get.addParam('p_widget_action_mod','ADD');
get.addParam('p_widget_mod','ACTION');
get.addParam('p_widget_name','worksheet');
get.addParam('x01',$v('apexir_WORKSHEET_ID'));
get.addParam('x02',$v('apexir_REPORT_ID'));
get.addParam('x03','EMPNO');
var gReturn = get.get();
//Refresh report request
var get = new htmldb_Get(null,$v('pFlowId'),'APXWGT',$v('pFlowStepId'));
get.addParam('p_widget_mod','PULL');
get.addParam('p_widget_name','worksheet');
get.addParam('x01',$v('apexir_WORKSHEET_ID'));
get.addParam('x02',$v('apexir_REPORT_ID'));
get.addParam('x03','EMPNO');
var gReturn = get.get();
//Refresh HTML report
$s('apexir_WORKSHEET',gReturn);
I'll try to put a post on my blog about the full solution to this shortly ([http://apex-smb.blogspot.com/])
Martin

Oracle APEX 4.0 - Interactive Report - Table Column Filter Issue

Environment: Oracle APEX 4.0 - Interactive Report - Table Column header Filter Issue
We have developed an interactive report using Oracle APEX 4.0, which contains a record count of around 3,000 Rows. All the rows values are unique in nature. When we try to filter the same with the help of column header filter option available in the interactive report,We get only 1000 records.
Could some one help us, why this behaviour under APEX Table Column Header Filter as if it does not display beyond 1000 distinct values.
Is there a way or workaround on how to get all the records in the column header filter?
Thanks in advance.
Krish

Hi
Thanks for the advice and this issue has been moved to the below URL
Oracle APEX 4.0 - Interactive Report - Table Column Filter Issue Posted: No
Krish

Interactive Report Column Headings and Row Height

I am using the div style="width:350px;" method to control the width of columns in various interactive reports. That works fine except for the following:
1. When creating filters, the <div...> stuff shows up along with the actual column heading, thus confusing some end users
2. Even when I uncheck the "Use same text for single row view" checkbox and then provide a simple single row view label, the <div> stuff still shows up on the single row view
Does anyone have a better solution?
Also, does anyone know of a way to limit the row height within an interactive report row? I have some columns of data that contain a large amount of HTML data and I'd like to be able to limit the number of rows that show on the report.
Is Oracle planning to provide some better control over the Interactive Report columns in another version? The Interactive Report is such a huge improvement in usability in APEX - it would be great to take it to another level by providing some better control over column width and row height.
Edited by: DaleB on Jun 18, 2009 8:54 AM
Edited by: DaleB on Jun 18, 2009 8:54 AM

Dale,
Unfortunately we don't have much we can use to do what you would like. I would have said it's impossible until version 4 but you could actually do something similar to what Roel has done. His trick is in the edit button. He changed the edit button to use an "onload" call to a JavaScript process. You could do the same but call a process that goes across the rows and styles each column. Now because you don't have a way to identify the column (can't use the order because the end user could change it) you'll have to write the code to look at the top row first and then style the appropriate column. As far as I can tell, this would be quite difficult and inefficient. Having said that if you need it that bad and would like some help with it, put up an example application on apex.oracle.com and provide the workspace/username/password and I'll take a look.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
You can reward this reply by marking it as either Helpful or Correct ;-)

How to show only filtered rows in download file of Interactive report

I have an interactive report.
If i filter column A and don't want to show column A in the download spreadsheet or PDF(NVL(:REQUEST,'column A') NOT IN('XLS','PDF'). All of the rows will show up in my download file. How could i show just filtered rows in the download file and also don't show the filter column?
Thanks,
Jen
Edited by: Jen Hu on Nov 22, 2010 2:54 PM

HI,
For example your model node is CountryModelNode and the value node binded to table is CountryValueNode then:
int sizeCountryModelNode=wdContext.nodeCountryModelNode().size();
for(int iCount=0;iCount<sizeCountryModelNode;iCount++)
   if("IN".equalsIgnorecase(wdContext.nodeCountryModelNode().getCountryModelNodeElementAt(iCount).getCountryCode())
   || "US".equalsIgnorecase(wdContext.nodeCountryModelNode().getCountryModelNodeElementAt(iCount).getCountryCode()))
    IPrivateCountryValueNode.ICountryValueNodeElement element=wdContext.createCountryValueNodeElement();
    element.setCountryCode(wdContext.nodeCountryModelNode().getCountryModelNodeElementAt(iCount).getCountryCode());
    element.setCountryName(wdContext.nodeCountryModelNode().getCountryModelNodeElementAt(iCount).getCountryName());
   wdContext.nodeCountryValueNode().addElement(element);
Note: Bind CountryValueNode to the table:
Regards,
Charan

Oracle APEX 4.0 - Interactive Report - Table Column Filter Issue Posted: No

Environment: Oracle APEX 4.0 - Interactive Report - Table Column header Filter Issue
We have developed an interactive report using Oracle APEX 4.0, which contains a record count of around 3,000 Rows. All the rows values are unique in nature. When we try to filter the same with the help of column header filter option available in the interactive report,We get only 1000 records.
Could some one help us, why this behaviour under APEX Table Column Header Filter as if it does not display beyond 1000 distinct values.
Is there a way or workaround on how to get all the records in the column header filter?
Thanks in advance.
Krish

Krish,
Interactive report has hard coded limit to display 1000 rows of column filter LOV for performance. Unfortunately, the limit cannot be changed. The workaround is to define a Column Filter LOV for the column instead of using "Default Based on Column Type".
Regards,
Christina

Try to set filter in webtemplates (WAD) via URL

Hi,
I try to set filter via url. I have one report and create a view. This view is shown via webtemplate. Now I try to generate a url with special parameter to set some filter automatically. The normal view has all countries but now I need a view with Germany and another view with Austria. I want to create no other view for that I would modify the filter via URL parameter like ...?template_id=tempalte_1&land_bu=Germany.
Greets, Thomas

Hi Thomas,
if you need information about 3.5 technologie go to sap.help.com and choose the help for SAP NetWeaver 2004 (without the 's').
There you will find the information if you search with the string 'Command URLs' or try http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Regards
Lars

Interactive Report uncheck Filter when adding new filter

Is there any possibliity to uncheck all Filters which are already defined in a interactive report when a new filter will be created?
My first approach started by adding a dynamic action which is related to the search field:
event = key_down
jQuery Selector = #apexir_SEARCH
event Scope = live
The Action contains:
$('input:checkbox').attr('checked', false);
There are 2 problems at the moment:
1. When the user hits "go" or "enter" the checkbox are checked again when the result is shown
2. If a filter is defined where the search field is not used, it doesn't work

Hi Oliver,
too much hassle I think. You can try to hijack any POST message, analyze it, and if it's about p_widget_action=FILTER you'd stop the action and interfere with an AJAX call to APEX_UTIL.IR_FILTER or IR_RESET. After the AJAX request has returnd (synchronously), you can fire the original POST again which sets the new filter.
Hmm. Sounds to me like you'd better ask the client if he is willing to pay for that sort of convenience.
Greetings from Northern Germany,
Andreas

Interactive report row-level ("OR") filter via URL?

Similar Messages

Maybe you are looking for