Try to set filter in webtemplates (WAD) via URL

Hi,
I try to set filter via url. I have one report and create a view. This view is shown via webtemplate. Now I try to generate a url with special parameter to set some filter automatically. The normal view has all countries but now I need a view with Germany and another view with Austria. I want to create no other view for that I would modify the filter via URL parameter like ...?template_id=tempalte_1&land_bu=Germany.
Greets, Thomas

Hi Thomas,
if you need information about 3.5 technologie go to sap.help.com and choose the help for SAP NetWeaver 2004 (without the 's').
There you will find the information if you search with the string 'Command URLs' or try http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Regards
Lars

Similar Messages

Row filter on Interactive Report via URL parameter

Hi,
I've searched the forum but can't find a concise answer.
Is it possible to pass a parameter (p_X) from one page to another via the url and then use p_X to act as a row filter in an Interactive report?
Thanks for the help
Joel

Joel -
Read the link that Andy posted. It is a pretty good source. This topic is not really that difficult to do. I have done it several times. Make sure that you understand the URL syntax for APEX. If you need a refresher on this take a look at http://www.oracleapplicationexpress.com/tutorials/55
Austin

When i try to set up my icloud account the system says it is sending me an email to verify. I never get the email and it is not in my spam filter. How can i get set up??

when i try to set up my icloud account the system says it is sending me an email to verify. I never get the email and it is not in my spam filter. How can i get set up??

Make sure that your Apple ID is your email address and you do not have any other or old IDs associated with you. Go to www.appleid.apple.com and confirm this info. Make sure that the email address you are trying to sign up with is your primary one.

Performance of set variable command in WAD

Hi all
The set variable command in WAD is performing really badly. Can somebody please help me to identify how to decrease the response time.
thanks in advance

Hi Vikram,
your link to SAP Help is wrong. It refers to BW 3.5 (NW04), but your URL looks like BW 7.0 (NBW04s). So you need another SAP Help link. Try this one:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/43/ef05462480025ae10000000a1553f7/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/43/ef05462480025ae10000000a1553f7/frameset.htm</a>
Regarding to example 3 your link should look like this:
<a href="http://sthbmdm8dv.client.com.50000http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=ZPlan_W00500&BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=zplan_appid&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=10002002">http://sthbmdm8dv.client.com.50000http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=ZPlan_W00500&BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=zplan_appid&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=10002002</a>
If the variable screen starts up, you should suppress it in template properties.
best regards
ARNE
Edited by: Arne Witte on Jan 18, 2010 6:40 PM

How to set filter to get instances for external variable

Hi,
I am trying to get instances based on external variable. Below is my code
bp.connectTo(url : Fuego.Server.directoryURL, user : "test", password : "test", process : processName);
fltr.create(processService : bp.processService);
fltr.searchScope = SearchScope(participantScope : ParticipantScope.ALL, statusScope : StatusScope.ONLY_INPROCESS);
//fltr.addAttributeTo(variable : "PREDEFINE_INSTANCE_NUMBER", comparator : Comparison.IS, value : Integer.parseInt(requestId));
fltr.addAttributeTo(variable : "requestIdExt", comparator : Comparison.IS, value : Integer.parseInt(requestId));
When I try to set the filter for PREDEFINE_INSTANCE_NUMBER, I am able to get the instance but not for external variable. Is there any other way to get instances based on external variables?
Thanks in advance

You can use a inputdate, which allows you to selecte a moth, year and a day. Once the selection is made you convert it to only allow moth and date like
        <af:inputDate label="Label 1" id="id1" autoSubmit="true" value="#{bindings.myMonthYear1.inputValue}">
          <f:convertDateTime pattern="MM/yyyy"/>
        </af:inputDate>
        <af:outputText value="Selected #{bindings.myMonthYear1.inputValue}" id="ot1" partialTriggers="id1"/>
then you have a string holding month and year only. This value you split into two variables you or pass it as a whole parameter to the query and split it there.
Another way is to add two static lovs one for month and one for year and use them to get to the filter values.
Timo

FileDialog, how to set filter?

i try to use
setFilenameFilter(FilenameFilter filter)
to set filter for FileDialog, but FilenameFilter is an interface, what is the story?
do u know how to set filter?
thanks in advance

Construct a FileFilter class like:
public class CustomFilter implements FileFilter{
public CustomFilter(){
public String getFileExtension(File file) {
String ext = null;
String s = file.getName();
int i = s.lastIndexOf(".") + 1;
ext = s.substring(i).toLowerCase();
return ext;
public String doSomething(){
//do Something
//return something
and use the setFileFilter(FileFilter filter) method.

8820 - can't set up email and web via for local wi-fi use only

I purchased an 8820 from Circuit City about 3 months ago. This was an unlocked phone for use on the AT&T network. I did not want to purchase an data contract with AT&T, I only use AT&T for the phone number and text service. I would like to use the 8820 for email at home (gmail
acct) on my wi-fi network, and also for the internet at home on my wi-fi network.
When I try to set up my email on the blackberry the only option is "I want to use a work email account with a BlackBerry Enterprise Server". There is no home email setup.
Also, the browser won't connect even though I have my wi-fi set up at home. Is it possible to set up my gmail and internet without going through AT&T?
Thanks,
Jeff

Hi and Welcome to the Forums!
To use the BB PUSH email, you must subscribe to an adequate data plan. See this FAQ for general guidelines:
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
You might be able to use the HotSpot browser to browse via your home WiFi...or you might have to get a separate browser (Bolt, Opera, etc.) that does not depend on BIS. Without a data plan, you will be limited to only web-based services...you will not be able to use any of the proprietary BB services (as per the above FAQ).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

OWA logs user out when they try to set an Out Of Office Message

After upgrading to Exchange 2013 users can no longer set their Out Of Office (via OWA option 'Set Automatic Replies'). When a user tries to do so via OWA they are immediately logged out and get the error message "The user name or password you entered
isn't correct. Try entering it again."
We are currently on CU3, not sure if the problem was introduced in Exchange 2013 initially or once CU3 was applied.
Users see the same behavior when they try to check a Message Delivery Report via OWA.
Stephen

Hi,
Steps as below:
1. Remove-WebServicesVitualDirectory
2. Get-WebServicesVitualDirectory to ensure the website was removed.
3. New-WebServicesVitualDirectory
More details in the following article:
http://technet.microsoft.com/en-us/library/bb125176(v=exchg.150).aspx
I also found a thread about how to rebuild the EWS VD:
http://social.technet.microsoft.com/Forums/exchange/en-US/214932bf-e5ae-4196-8bb8-79a456bc1d10/rebuild-the-ews-virt-directory
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Problem: no hostname set and unable to detect via DNS

Hi!
I spotted the following message in my server's system log today. I don't know if it's after 10.4.6 update or not.
Apr 4 19:50:50 xserver servermgrd: servermgr_dns: no name available via DNS for XXX.XXX.XXX.XXX
Apr 4 19:50:50 xserver servermgrd: servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair
XXX.XXX.XXX.XXX - public IP address
xserver - name of my server
Besides my LDAP keeps saying in the log:
Apr 4 15:04:32 xserver slapd[77]: do_search: invalid dn (cn=config, )\n
Apr 4 15:04:32 xserver slapd[77]: do_search: invalid dn (cn=config, )\n
Apr 4 15:04:32 xserver slapd[77]: do_search: invalid dn (cn=config, )\n
Apr 4 15:04:32 xserver slapd[77]: do_search: invalid dn (cn=computers, )\n
Apr 4 15:04:32 xserver slapd[77]: do_search: invalid dn (cn=computers, )\n
Apr 4 15:05:43 xserver slapd[77]: do_search: invalid dn (cn=config, )\n
Apr 4 15:05:43 xserver slapd[77]: do_search: invalid dn (cn=neighborhoods, )\n
Apr 4 15:05:43 xserver slapd[77]: do_search: invalid dn (cn=neighborhoods, )\n
Is it kinda one problem? Did I do smth wrong?
I don't have a slightest idea what to do with that. Any help would be much appreciated.
Rgrds,
Maxim
PowerBook G4 1GHz 12" 40GB SD Mac OS X (10.4.6) also have Xserve G4 10.4.6

Err... You only want to point the server to itself (127.0.0.1), IF you configure it (the server) to run DNS.
I tried to be clear about that, sorry if it was not.
You will continue to have a problem, if you point the server at the DynDNS name servers. I'll try to explain again.
You have an external IP that keeps shifting. DynDNS is a workaround for that. Normally, a server has a static IP. (I'm simplifying ALOT here for the purpose of illustration):
When someone "out there" on the 'Net tries to find "www.yourserver.dyndns.com", it queries DNS, the first server doesn't know the answer but passes the request onto DynDNS dns servers , and a reply is sent, "that server is at this IP address" and then the person's web browser loads the webpage served up by at IP address 6x.10x.xx.x (some publicly available IP, the one dynamically assigned by your ISP) which is where your server "ww.yourserver.dyndns.com", which is actually to be found. And hopefully your router is properly forwarding http requests (port 80) on to your server.
So then, if you point your server at the DynDNS servers, it will try to "find itself," and the answer is going to be that external, dynamic IP. Whatever it might be that day, is what the DynDNS server(s) will respond with. And that is not going to be a match, since your server is behind a Router doing NAT, and has an IP address of 192.168.123.1 for example. And nothing is going to do a reverse lookup for 192.168.123.1 either.
One way to resolve this, is to setup internal DNS on the server itself. Which is beyond the scope of this thread, I suggest searching this forum and reading up on it, after having read the Apple doc
http://images.apple.com/server/pdfs/NetworkServicesv10.4.pdf
starting on page 37.
Further thoughts: to change the hostname, you can use the changeip command, see page 50 of the command-line manual:
http://www.apple.com/server/documentation/
and download the Command Line Administration PDF.
in the Terminal: man changeip
for example, all on one line, if running as an Open Directory master:
sudo changeip /LDAPv3/127.0.0.1 192.168.123.1 192.168.123.1 oldhost newhost
The IP address is identical on purpose, if the IP is not changing, list it twice, that's the syntax. Old = new, in this case is all.
If running as Standalone, and changing the IP:
sudo changeip - 192.168.123.1 192.168.123.2 oldhostname newhostname
You can use (this is described in the Command Line Administration PDF)
serversetup -setHostname hostname
You could also edit /etc/hostconfig and change
HOSTNAME=-Automatic-
to =-your.servername.com-
To change the DNS server(s) used by your Xserve, use:
networksetup
man networksetup
on the server itself.
PS:
If you're charging a client for anything related to this, you need to learn about all of what we've been discussing in a real hurry, you should know it already (if charging for it), I mean this in a friendly (but steadfast) way. Start by reading the Apple documentation, it's a good place to begin.
And perhaps DynDNS has a way to handle "internal" (RFC1918) private IPs and external, publicly available IPs. I won't claim to know, first step I'd take would be to check their docs.

When i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account?

when i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account? if i change my ID on the ipad deos it change it on my computer aswel?

Hi
I would try this since Apple TV is built to allow multiple Apple Ids
On you Apple TV
General > Settings >Itunes Store > Add New Account (put yours in here)
Then Switch account to your Apple Id
Cheers

Hi, my friends ID and password works fine for downloading apps etc but when I try to set up iMessage once you put in the apple I'd and password it say email incorrect so can't go any further but we know this is correct. please Help and thanks

Hi
I have set up iMessage and FaceTime and tried to set up for a friend but won't work? The apple ID is ok as downloading Apps but when I try to set up iMessage it won't go to the next stage as it says the EMail can't be verified? Either though we know its working
Please help

Reset all settings and try again. If that doesn't help contact Apple.

How to set filter for few Setup Objects on Geneneral Foundation?

Controlling the download of sub-entities:
By default all sub-entities are downloaded. Pass a non-existing value
for the parameter (primary key) of the sub-entity if you don't want to
download a specific sub-entity.
For example, if you don't want to download the values of a value set,
then use following input to FLEX_VALUE attribute while setting filter;
FLEX_VALUE='THIS_IS_A_NON_EXISTING_VALUE_I_DONT_WANT_TO_DOWNLOAD_VALUES'
VALUE_SET
Notes:
- To download '$FLEX$.%' value sets pass '$FLEX$.%' argument.
- Upload API automatically submits the hierarchy compiler request
- FLEX_VALUE_SET_NAME is a required argument for download.
You can find the following parameters in Set Filter screen of Value Set Values.
VALUE_SET has subenities such as VSET_SECURITY_RULE, VSET_ROLLUP_GROUP and VSET_VALUE.
Setting value for attribute FLEX_VALUE_SET_NAME downloads all the subentities. If you want
to restrict the subentities, set appropriate filter at VSET_SECURITY_RULE, VSET_ROLLUP_GROUP
and VSET_VALUE.
Parameters:
VALUE_SET
| FLEX_VALUE_SET_NAME : Value set name.
|
+-VSET_SECURITY_RULE
| FLEX_VALUE_RULE_NAME : Value set security rule name.
| PARENT_FLEX_VALUE_LOW : Independent value for the dependent value sets.
|
+-VSET_ROLLUP_GROUP
| HIERARCHY_CODE : Hierarchy (rollup group) code.
|
+-VSET_VALUE
PARENT_FLEX_VALUE_LOW : Independent value for the dependent value sets.
FLEX_VALUE : Flexfield segment value.
DESC_FLEX
Notes:
- Upload API automatically submits the flexfield compiler request
- Upload API automatically submits the DFV view generator request
- APPLICATION_SHORT_NAME is a required argument for download.
You can find the following parameters in Set Filter screen of Descriptive Flexfields.
DESC_FLEX has subenities such as DFF_REF_FIELD, DFF_CONTEXT and DFF_SEGMENT.
Setting value for attributes DESC_FLEX and DESCRIPTIVE_FLEXFIELD_NAME downloads all the subentities.
If you want to restrict the subentities, set appropriate filter at DFF_REF_FIELD, DFF_CONTEXT
and DFF_SEGMENT.
Parameters:
DESC_FLEX
| APPLICATION_SHORT_NAME : Application Short Name.
| DESCRIPTIVE_FLEXFIELD_NAME : Descriptive Flexfield Name.
|
+-DFF_REF_FIELD
| DEFAULT_CONTEXT_FIELD_NAME : BLOCK.FIELD reference field name.
|
+-DFF_CONTEXT
| DESCRIPTIVE_FLEX_CONTEXT_CODE : Context Code
|
+-DFF_SEGMENT
END_USER_COLUMN_NAME : Segment Name
APPLICATION_COLUMN_NAME : Column Name
KEY_FLEX
Notes:
- Upload API automatically submits the flexfield compiler request
- Upload API automatically submits the KFV view generator request
- Upload API automatically submits the structure view generator request
- APPLICATION_SHORT_NAME is a required argument for download.
You can find the following parameters in Set Filter screen of Key Flexfields.
KEY_FLEX has subenities such as DFF_REF_FIELD, DFF_CONTEXT and DFF_SEGMENT.
Setting value for attributes APPLICATION_SHORT_NAME and ID_FLEX_CODE downloads all the subentities.
If you want to restrict the subentities, set appropriate filter at KFF_FLEX_QUAL, KFF_SEGMENT_QUAL,
,KFF_STRUCTURE,KFF_WF_PROCESS,KFF_SH_ALIAS,KFF_CVR_RULE and KFF_SEGMENT.
Parameters:
KEY_FLEX
| APPLICATION_SHORT_NAME : Application Short Name.
| ID_FLEX_CODE : Key Flexfield Code.
|
+-KFF_FLEX_QUAL
| | SEGMENT_ATTRIBUTE_TYPE : Flexfield Qualifier Name
| |
| +-KFF_SEGMENT_QUAL
| VALUE_ATTRIBUTE_TYPE : Segment Qualifier Name
|
+-KFF_STRUCTURE
| ID_FLEX_STRUCTURE_CODE : Structure Code
|
+-KFF_WF_PROCESS
| WF_ITEM_TYPE : Workflow Item Type
|
+-KFF_SH_ALIAS
| ALIAS_NAME : Shorthand Alias Name
|
+-KFF_CVR_RULE
| FLEX_VALIDATION_RULE_NAME : Cross Val. Rule Name.
|
+-KFF_SEGMENT
SEGMENT_NAME : Segment Name
APPLICATION_COLUMN_NAME : Column Name
MENU
You can find the following parameters in Set Filter screen of Menus.
PARENT_MENU_NAME Name of the menu to start downloading at. If this
parameter is specified on its own, that menu and
all its children will be downloaded. If specified
with FUNCTION_NAME and/or SUB_MENU_NAME, then only
the menu entry with that function and/or submenu name
immediately under the PARENT_MENU_NAME will be
downloaded.
FUNCTION_NAME Function name to limit download to. If this parameter
is specified then PARENT_MENU_NAME must also be
specified in order to download menus. Specifies
the function on a menu entry immediately under
PARENT_MENU_NAME which will be downloaded; all other
menu entries under PARENT_MENU_NAME will not be
downloaded.
SUB_MENU_NAME Sub Menu name to limit download to. If this parameter
is specified then PARENT_MENU_NAME must also be
specified in order to download menus. Specifies
the Sub Menu on a menu entry immediately under
PARENT_MENU_NAME which will be downloaded (along with
all its children); all other menu entries under
PARENT_MENU_NAME will not be downloaded.
MENU_APP_SHORT_NAME Application short name of Menu. The menu on the resp
for this application will be downloaded. If you
pass this parameter, do not pass any of the other
parameters; this parameter is only supported on its
own.

Oh never mind.... I figured it out myself helps to read up on the manuals. d'oh. sorry for the bandwidth waste...

I setup my iCloud account on my iPhone 5 with the wrong e mail address, and I don't remmber the password, I reset my tel and erase all the information on my iPhone in order to try to set up a new iCloud account but when I restart I have a problem aga

I setup my iCloud account on my iPhone 5 with the wrong e mail address, and I don't remmber the password, I reset my tel and erase all the information on my iPhone in order to try to set up a new iCloud account but when I restart I have a problem agaIn , they ask me to put again the old iCloud user account and password, what I can do in order to start the phone when I don't have the correct e mail and I don't remmber the passcode.?

I have the same problem as the emails go to my iCloud account that I cannot access!!! I cannot answer the security questions as someone else must have set up my iCloud account. Nothing seems to work. It would be great if someone has some ideas as what can be done to recover the situation?

HT2534 When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

I upgraded my wife's iMac to Mountain Lion. When I try to set up her cloud connection to sync with her iPad and iPhone, it says it is sending a verification email, but it never arrives. Any way around this. Her phone and iPad seem to already be in sync .

When I try to set up my wife's Cloud account after upgrading to Mountain Lion, I click on the "send verification email" box, but the email never arrives. Her iPad and iPhone already seem to sync up in the Cloud, but no storage is being used. Any suggestions on how to get the account on her iMac?
Steve Driggers

Hi sddmd,
And you have checked her Junk mail folder?
Cheers,
GB

Try to set filter in webtemplates (WAD) via URL

Similar Messages

Maybe you are looking for