Intercompany Purchase Order adress display based on output conditon

My requirment is For ZMAL output the delivery address should pick from Intercompany Purchase Order and print in SHIP-to Box on SF, for other output types address comes from normal sale order(ship top party).
I have to set the logic in print program that is only for Intercompany STO.
Ideally the system takes plant address by default and when storgae location is entered in PO it pick the storage location address and gets displayed in the PO. 
Please help me out where i have to make/write changes/coditions for address display in SHIP-to Box window on SF, if possible with sample Code .
Thanks in advance.
Vishnu.

Hi,
My req. is in a window i have to print ship-to party address for all outputs except one type(ZMAS), for ZMAS i have to pick address from PO from address tab.
Plz help me how to write condition in that window for address dispaly, help me with sample code possible!
thanks in adv.

Similar Messages

  • Automatic account postings (for Intercompany Purchase order and Sales order

    Hi all,
    I need some help related to the automatic account postings (for Intercompany Purchase order and Sales order)which i can set for the follwoing scenarios. I have looked on the forms and searched alot but not able to a single solution to solve both the pupose. if one scenario works the other doesnt. Please advise.
    I have created the master data
    Customer receiving--G001
    Sales Org.--GXIN
    Distr. Channel- 01
    Division - 00 
    Company code receiving - G1
    customer supplying- V001
    company code for supplying- V1
    2 different scenarios
    1- Intercompany Purchase order in which a Customer receiving- G001, gets stock replenishment NB purchase order from supplying company V1- GI  and GR of stock is done. Biling document for customer receiving G001 is created. But now I need a way to do the opposite side posting at the supplying customer -V001-- this I do using an Idoc which creates a Invoice receipt for creditor(supplying customer) V001.
    2. Sales order-- A customer X001 of company code G1 buys stock from the company code V1. the customer G001 of company code G1 bills the customer X001, but the intercompany billing doc/ invoice is created for the customer G001 by company code V1.  then now i want an automatic account posting to be created at the supplying customer V001 via idoc.
    Can this be achivable via Idoc with automatic account postings.   
    Please let me know if it doesnt make sense. thanks to all in advance
    cheers
    Jasmeet

    Hi all,
    For the Sales order and automatic posting we have created an output type ZR4N- this is creating a batch input session which can be triggered to be processed autmatically.
    For the intercompany Purchase order -from Invoice we are creating a different output RD04 (sap standard) which creates invoice receipt at the vendor side.
    Rest of the settings are defined using SAP standard functionality within transaction OBCA, OBCB, OBCC, OBCD,OBCE
    thanks for viwing the post
    Cheers
    Jasmeet

  • Goods receipt in intercompany purchase order

    Hi,
    In case of an intercompany purchase order ( plant to plant with different co. codes) when Goods Issue is done in supplying plant and Goods Receipt is done in receiving plant, then still reversal of Goods Issue is possible and stock gets updated in both the plants after reversal.
    In supplying plant it is added equal to reversed qty but in receiving  plant it does not get cancelled but remains the same as after GR
    Logically system should prevent the reversal but it does not happen
    The same case with stock transport order ( plant to plant in a single co. code) if executed system prevents GI reversal if GR is already done
    The movement type called in intercompany flow is 643 where as in stock transport order it is 641
    Can somebody explain the reason?
    Nitin

    hii
    Its possible to change the order number while doing GR- MIGO.
    Go to ME22N, before GR do the changes in order in account item category in item level tab in PO.
    Then do GR .
    Thanks

  • Open intercompany purchase orders

    hi
    need standard report to show open intercompany purchase orders as well as open sales orders
    Regards
    Vishal

    Hi,
    In ME2M or ME2N, you choose selection parameter WE101.
    Thanks..

  • Purchase order release strategy based on over delivery tolerance level

    Hi Boss,
    I like to set the Purchase order release strategy based on the over delivery tolerance. But when i checking, the over delivery tolerance filed UEBTO is not in the communication structure CEKKO. Can you please help me how should i extend the CEKKO with field UEBTO.
    I do not have the ABAP experience, please guide me with coding.
    Thank you,
    Siva

    Hi Siva:
    You should request the development key for this structure under your SAP system, then you can add the extra fields in CEKKO.
    Good luck
    Z.T

  • Can I modify the column "Net Price" of purchase order to display 3 decimals

    Dear expert,
         Can I modify the column "Net Price" of purchase order to display 3 decimals?
         Looking forward to your reply.
         Many thanks.
    Best Regards,
    Merry

    Hi,
    You can easily change ur decimal place in OY04 by seeting number of decimal place to ur currency.
    But be careful as it cause a huge effect to ur finance documents, read system message carefully before applying.
    Regards
    ManUfacTuReR

  • MM02 Purchase Order text display only

    We have transaction variants with screen variants set up for transaction MM02 and want  to make the purchase order text display only. This does not seem possible with transaction variants as the display only is greyed out for the purchase order text.
    Is there an enhancement or exit available where we can do this ?

    Hi
    Check it in SPRO - SAP IMG- Logistics general - Material master -field selection
    In this u can do it.
    Regards,
    Raman
    Edited by: Raman S on Sep 4, 2009 10:30 AM

  • Change output - purchase order - stop print based on criteria

    Hi,
    In config  (print relevant purchase order changes), we have he purchase order indicator turned on for a specific field, so every time we change that field in the purchase order its going to print , however, for some types of material (info is available in EKPO) i need to contol the print ( print or not to print) , please let me know the appropriate user exit or enhancement where i can control the print.
    when the PO is approved in ME29N system generates a print and i need to control it. any suggestions are welcome
    Thanks,
    VY.

    Hi,
    Check BADI "ME_PROCESS_PO_CUST".
    Best regards,
    Prashant

  • Purchase order form display the BOM of the item material

    Dear :
      When i print or preview the purchase order in ME23n,I want to display all of the  components of  material which every item used.(sap standard output type is NEU,form is MEDRUCK)
      The components can be displayed when we click the button of "Components" in the right "Material Data" ITem Tcode:ME23N.
      Firstly ,i have to get the BOM of the material through the function:CS_BOM_EXPL_MAT_V2.But NOW,i found that ,In ME22N ,the operator would change the components and saved the order,
       so, my way to display the component in the print form is wrong!:(
       anyone give me some advice?
       Thanks.

    Shao,
    I guess you will have to design your SMART Form according to your requirments and configure this SMART Form to be called from the output conditions of the PO.
    In this SMART Form, you will have to include the logic of exploding the BOM and showing the components as well.
    I don't its a standard functionality.
    Regards,
    Ravi
    Note : Please reward the helpful posts.

  • Purchase order Delivery date based on PO doc no and PO item no

    hi all
    we have a  requirement to bring Purchase order delivery date in to our report .
    it is in EKET Table - field EINDT.
    Is it possible to get this PO Delivery date in to our data source 2lis_02_itm which has PO Doc no(EBELN) and PO item.no (EBELP).
    In EKET Table the primary key is based on 3 fields. PO Doc no(EBELN), PO Itm.no(EBLEP) and delivery schedule line counter (ETENR).
    In EKET Table the data is like
    PO.NO/PO itm no/ schline counter/delivery date
    1000/10/1/1-1-2011
    1000/10/2/5-1-2011
    1000/20/1/2-2-2011
    1000/20/2/2-2-2011
    1000/20/3/5-2-2011
    so on...
    IF i enhance my datasource and populate the delivery date based on EBELN and EBELP we get only 1 delivery date for all the different schedule lines which is wrong.
    I know there is a separate datasource for schedule line data for purchasing BUT IS IT POSSIBLE TO GET the delivery date based on the different schedules by using some ABAP CODE, SINCE in our datasource 2lis_02_itm we dont have ETENR( SCHEDULE LINE COUNTER FIELD).
    if we use the standard data source  (2lis_02_SCL )it is not fair to pull all that data since we only need 1 field from it.
    Please suggest
    Thanks & Regards.
    Krishna

    Hi Krishna,
    Even though you plan to write some ABAP code or do any processing for a combination of PO document no. and Item no. you will always get multiple records with different schedule line items and it is really impossible to take the delivery date without knowing schedule line item no.
    And even when you said PO delivery date, it is actually means delivery date of any of the schedule line only. If you want to write some ABAP logic then you will have to decide like whether you want to display the First line item date or the last line item date etc. But which is again not a good idea.
    I think you can go for schedule line extractor.
    Regards,
    Durgesh.

  • MM:save purchase order uFF0Csystem display ERR

    save purchase order ，system display Err:
    1、No short text maintained in language ZF (please re-maintain material T6-60101)
    2、Purchase order still contains faulty items
    how i can do?
    taks you!

    Hi
    This is because for the material which you are using in the purchase order,you havent maintained the text in the material master record.So go transaction Tcode MM02 and enter your material.Then in basic data 1 view,at the bottom there is a tab for Basic data text.Click on that tab,it will take you to a additional data screen where you have to maintain a short text for thematerial in the language ZF.Then save it.
    Hope this will help you
    Reward if useful
    Thanks and Regards
    SHYAM.R

  • ME23N - Read Last Purchase Order for Display

    Hi,
    We are upgrading from 4.6C to ECC6 and one of the problems the users have identified is that when displaying the purchase order with transactions ME22N or ME23N the last purchase order that was worked on is not always the one that is displayed.
    This is very evident when creating a PO with ME21N and then switching to view it on ME23N - in ECC6 the PO that was created is never the PO that is displayed on ME23N; whereas in 4.6C creating a PO with ME21N and switching to ME23N the PO that was created is ALWAYS the PO that is displayed on ME23N.
    It this feature (whatever) no longer available with ECC6?  Is it a configuration settings that we haven't properly set in ECC6? 
    Thanks for any help.
    Martha

    I analysed how SAP remembers the previous purchase order number in transaction ME23N in version 4.7 as I do not have access to version ECC6. In version 4.7 transaction ME23N reads table ESDUS (MM: Dynamic User Settings) in the following way
    ESDUS-UNAME = sy-uname
    ESDUS-ACTION = 'MEPO'
    ESDUS-ELEMENT = 'Application         Po_Process'
    The purchase order number is the first 10 characters of ESDUS-ACTIVE (ESDUS-ACTIVE+0(10)).
    When you read a new purchase order SAP writes that order number to table ESDUS using function module ES_SAVE_USER_SETTINGS. When you revisit the transaction SAP uses function module ES_READ_USER_SETTINGS to read the purchase order number stored in table ESDUS.
    Ask an ABAP programmer to investigate this in your system with the information I have provided you. He/She should be able to find out what is going wrong. I am limited because I do not have access to your system. Hope this helps. Please let me know what the ABAP programmer found out.

  • SDRQCR21 and delivery from intercompany Purchase orders

    I used the program SDRQCR21 to clean a bad requirement generated by intercompany delivery between to company born by a purchase order (to be clear: the company 1 made a PO to company 2  which create a delivery using the VL10B with this PO).
    The program delete the bad requirement but delete also other good intercompany deliveries present over the material, without regenerating these. Now i must found a sistem to recreate these. Why the program don't take again these deliveries? Because they are link to a PO?
    thanks
    Davide

    Davide,
    Which version are you on? Pls check if OSS #193986 helps you.
    Thanks
    Ashutosh

  • Purchase Order not displayed in BBP_POC

    Hi SRM'ers,
    We are implementing SRM5.0 (ECS). The problem we have is after the PO has been created in SOCO, it is not displayed in Process Purchase Orders (BBP_POC), however no errors ocurr during the creation of the PO, and it is replicated to the backend ECC6 system
    Any ideas / solutions?
    Many thanks

    Hi,
    Have you entered any specific search criteria in the SIMPLE or EXTENDED search  selection screen?
    If yes,please remove that and see if you can see any PO's.
    Also have a look at these notes;
    1128758 BBP_POC: Search Issue in Purchase Order
    1138911 BBP_POC - Search issue in purchase order
    1104589 PO Search not returning all results
    BR,
    Disha.

  • Purchase order list display with confirmed date

    Hi,
    I know the ME2* transactions, but how can I get a list from SAP where I see for a list of purchase orders the initial requested delivery date next to the confirmed delivery date?
    Thanks,
    Peter
    Helpfull feedback will be rewarded.

    Hi,
    you need to customize on this requirement, use below purchase order tables
    EKKO     Purchase document
    EKPO     Purchase document (item level)
    EKPV     Shipping-Specific Data on Stock Tfr. for P Doc. Item
    EKET     Delivery schedule
    VETVG     Delivery Due Index for Stock Transfer
    EKES     Order Acceptance/Fulfillment Confirmations
    EKKN     Account assignment in purchasing
    EKAN     Vendor address purchasing
    EKPA     Partner functions
    EIPO     Item export / import data
    EINA     Purchase info record (main data)
    EINE     Purchase info record (organisational data)
    EORD     Source list
    EBAN     Purchase requisition
    EBKN     Purchase Requisition Account Assignment
    Regards,
    Sankaran

Maybe you are looking for