Interface Adviser

Where can I read about the Interface Adviser (as in idocs and ale). The link http://sapnet.sap.com/int-adviser is not working.....

Hi Charles,
The right link is https://service.sap.com/int-adviser ; nevertheless, it seems the information is not updated anymore.
Regards,
Arturo.

Similar Messages

Access to Interface Adviser

Dear Experts,
I was wondering if someone can tell me where to find the Interface Adviser these days? I know there used to be an web version of the tool on "http://sapnet.sap-ag.de/int-adviser", but it's not there anymore and I can't find it in SDN. Documentation on help.sap.com still refers to the old url.
I understand that the content may be slightly outdated, but I earlier found the information on various IDocs valuable and those haven't changed much, have they?
Many thanks for your help!
Best regards,
Anna Englund

Hi Anna
Is this like the http://ifr.sap.com that got scrapped?
If so, it was superceded by the Enterprise Service Workplace!
https://www.sdn.sap.com/irj/sdn/esworkplace

New Audio Interface Advise?

I've got a buddy who sent me this. I imagine this is a great place to get some suggestions...
BTW: I think he's using boot camp...
I need a new sound card/break-out box and thought if you don't know you might know someone who can help.
I have an iMac that's partitioned. One side Mac OS -- and the other Windows XP.
I run Sonar on XP and I'd like to learn Logic to "wean" myself off of Sonar.
So.... I'd like to get a basic stereo in/out interface with as good of A/D converters as I can afford.
I need:
Firewire
2 XLR and 2 phono inputs and 2 phono or rca outputs
Midi
Needs to run on BOTH Mac OS and XP
A good cue/headphone system (two mixes would be heaven)
Around $300.
Let me know what you think.
Could I get a higher quality older unit used... or should I buy new?
PS I'm tryin' to avoid the lower ended stuff like M-Audio & Presonus ie
What about a used RME Fireface UC
or a
Metric Halo MIO ULN2
or
Focusrite Saffire LE Firewire
or
Edirol?
Thanks in advance for any help

revDAVE wrote:
I've got a buddy who sent me this. I imagine this is a great place to get some suggestions...
BTW: I think he's using boot camp...
PS I'm tryin' to avoid the lower ended stuff like M-Audio & Presonus ie
What about a used RME Fireface UC
or a
Metric Halo MIO ULN2
or
Focusrite Saffire LE Firewire
or
Edirol?
Thanks in advance for any help
Of the items listed.
-Metric Halo is Mac only.
-Edirol is solid on PC but seems less so on Mac.
-Focusrite, least sure about this one, I've heard it's Firewire implementaion can be picky.
-RME is the best bet.
-Some of the higher end Presonus hardware is decent, their engineering staff is Mac oriented.
I have identical RME PCI cards in both the Mac & PC and their operation has been flawless.
pancenter-

Registration key vs. password?

I'm trying to install 10g from a Course Technology student CD. The installation wants a registration key, which the interface advises will be emailed to me upon registration. I've registered the software and received a numerical "password" -- that interface tells me the password is needed for the install. The install will not accept the "password" as a valid registration, and the registration screen will not email me a "registration key." Any ideas?

AFAIK, none of the Oracle software requires any form of software key to install. You need to contact the Course Vendor to find out what they are doing.
And, of course, you could easily download Oracle DB 10g from http://otn.oracle.com (look for the 'Download > Database' menu item) without any key or cost.

Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise o

Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you.
== This happened ==
Every time Firefox opened
== Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.78 Safari/532.5

Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages
You can try if it works if you disable OOPP (Out-Of-Process-Plugins) for Flash
You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
dom.ipc.plugins.enabled (currently false by default)
dom.ipc.plugins.enabled.npswf32.dll (Flash)
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.

I do not see the user interface for the Logic software instruments. I can hear them play through my midi keyboard but I cannot see them to adjust parameters. Please advise.

I do not see the user interface for the Logic Pro software instruments. I can hear them play through my midi keyboard but cannot see them to adjust the parameters. Please advise.

Couple of things - you can open the interface for any instrument or plug-in by double-clicking its insert slot on the channel strip. You can configure Logic to automatically open the interface for a plug-in when you first instantiate it in the preferences. Go to Logic Pro > Preferences > Display > Mixer, and check the box for "Open plug-in window on insertion".

Please can someone advise; Can I connect my 'Focusrite Saffire' audio interface using Garageband as the sequencer? Necessary as a consequence of 'Cubase LE' being incompatible with OS Lion

Warmly appreciated

Not sure I understand what you want to do, but
• your interface should work with GB if it works with Lion at all
• you can't use GB as a sequencer driving other sound units via midi since GB doesn't send midi signals out, it only receives.

[Interface] - Passing variety parameters/input to PL/SQL report

Hi,
I've the PL/SQL report which can allow passing in the parameter, i use '&'.
the report is given to the end user who do not have the IDE for PL/SQL. the machanism of the report is generated into the spool file and import into excel format.
now i am wondering how to create a tool using SQL or PL/SQL to allow the end user to choose the parameter(s) dynamically and passing into the PL/SQL to generate the report based on the input selected.
the parameters like below:
package code :
week no :
year :
department :
all the above parameters, the data would be selected from the existing lookup table. the user is allow to select more than 1 input for specified parameter for instance i want to spool report for week 1 until week 5.
pls advise any solution on this topic. thanks

hi scoot,
thank for reply.
yep, i'm using sql*plus and also sql navigator 4.0 .
the user don't have the software to interact. i'm thinking of build an simple interface using VB and passing in the parameter then initiate the sql*plus to run the program in background mode.
but if you have any other solution which not need to use other software to wirte such program , pls let me know immediately. thank

Open Interface Table for iExpense Template

Where can I find the table name of the Open Interface for uploading master records of GL, AR, AP, FA? I can only find the name to upload journal entries and AR, AP Invoice. Can someone advise me where can I find the open interface tables list for master records?
In particular, I would like to upload the Expense Item Template for Internet Expense of AP. I want to update the items by SQL Loader. (not the entries or transactions but master records of existing item code in the Expense template)
Thank you very much.

Hi;
Please review:
Oracle Trading Community Architecture User Guide
Regard
Helios

"securely" use one ethernet interface for WAN and other for the LAN

I am reconfiguring our dual 2.7 Intel Xserve running MacOSXServer 10.5.4, and had a question.
Is it possible (or advisable) to use en0 to perform LAN services, and then configure en1 to only allow access to very limited service. VPN, FTP, CALDAV and later Mail.
I imagine that this is possible via a firewall configuration, but first I do not know how to specify interface in addition to ports, and second I don't know how advisable this would be.
Currently I have a DSL package from ATT with 5 static IP addresses. I have an Airport Extreme set up as one of those addresses providing DHCP and NAT to the LAN. I am using the LAN ports on the back of that to bridge my three switches (2 managed [clients and oce print server 100 base-T] and 1 unmanaged [ laser printers and copier 10 base-T]).
I have the LAN based on 192.168.0.x, with the Xserve at 192.168.0.5. I have DNS configured and working (Thank you Antonio Rocco)
I have 20 LAN clients, 18 mac 1 PC and one PC via Parallels. I will have no more than 1 or 2 WAN clients at any one time
I provide AFP, SMB, Directory Services currently. As part of the reconfigure, I desire to take better advantage of the collaboration tools to provide wikis and CALDAV services. I also want to allow our employees to publish their individual calendars, so that they can subscribe to them at home, or vice versa.
I would like to configure VPN, one for me to access configurations when I am away using Remote Desktop (I have used command line to some extent, but still feel more comfortable with the GUI tools) and second for limited access to content for certain users.
It would also be very helpful for us to have a FTP site. It is unnecessary for this the be a FQDN service, sending the IP address is perfectly acceptable as we only use a service like this 10-15 times a year.
(Related but unimportant in the grand scheme, is there a way to generate a link to the FTP server that you could email that not only is a link, but also a temporary username and password?)
Thank you in advance,
Ion Webster

First, I missed a zero in the network speeds, I have two managed GbE switches that have all of the GbE capable machines connected to them, and an unmanaged GbE switch that has all the 10 or 100Base-T connections. My apologies for the mistake. That was one of the reasons I went with the GbE capable Airport to bridge the switches.
Ok, I had been leaning towards a separate hardware firewall, but here is also where there is a hole in my knowledge. Do I need to look at something like the Linksys RVS4000 which bills itself as a +"4-Port Gigabit Security Router with VPN. Secure, smart Gigabit networking for growing business"+ I would like easy configuration, as I take care of these systems in addition to my job, rather than full time. This will be the first time I have set up a VPN connection, so even though I have spent a lot of time researching the manuals, and reading Schoun Regan (Apple Training Series) I don't have real world experience here. So if I buy more hardware, I want it to be the product that will provide the protection, and also allow me to configure it so that I can get these services running. All my VPN clients are running Macs, most on an AIrport connection and have their IP ranges in the 10.0.1.x range. all but one is on OS 10.5.x so I have a fairly homogeneous set of machines to make work together.
I will review the links you provided regarding static routing, but I do believe the hardware solution is a better one, and wish to pursue it, for all the reasons you give, and that in the brief perusal of the links, it is more than I want to tackle.
As far as FTP vs sFTP, I have no preference. I simply want a way to have online storage for transfer of large files on occasion. Ideally I want a folder, or a series of folders that are accessible for my LAN users to put items in and take them out, and for my (s)FTP users to do the same
So long story short, the hardware solution I would like to purchase, I need to be able to do the following:
VPN connections for content access and ARD access ( knew about and will ensure differing IP ranges)
(s)FTP
Calendar publishing
mail(at a later time)
Thank you for your help thus far.
Ion Webster

IPSec tunnel on sub-interface on ASA 5510

Hello All,
I working on a security solution using ASA firewall and need some technical advice on ASA. Is it possible to setup a IPSec tunnels on each subinterface of a physical interface on ASA 5510?
I would be greatul if someone please reply post this with some details.
Regards,
Muds

Hi Jennifer,
Thanks very much for your reply. I understand where you coming from, but the reason of using sub-interfaces is that, we have only one physical interface on the firewall connected to the MPLS cloud, and we need to setup a seperate IPSec tunnels for each client for security and integrity. In the current scenario, I have static peers and we can easily setup a static route to peer address.
Many thanks for your assistance, please feel free to to advise if you have any other suggestion.
Regards,
Muds

HT1925 My ipod is not showing up when I have itunes up. I was told to remove itunes and reinstall however. I receive a message with unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-

can someone please advise on what I should do? unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-4953-92FA-624BDF5D 85AB) VEIFY THAT YOU HAVE SUFFICIENT ACCESS TO THAT KEY, OR CONTACT YOUR SUPPORT PERSONNEL, Which i did . I contacted the apple support and they could not help. has anyone gotten this error? Did some research some results show that this has occurred during updates on the itunes but has not seen how to successfully uninstall without getting this error. I attempted to use the control panel and uninstall but it provides me with the same error all the time. I NEED SOME Answers on this issue. Can you please help?!

Perhaps try the fixit from the following Microsoft web page. (Try the "problems uninstalling" option.)
Fix problems with programs that can't be installed or uninstalled

OSPF with ipsec VTI interface goes down before dead timer.

I have a strange issue that OSPF will initially start working, hellos are exchanged both ways but then after about 3 – 6 hellos one of the sides stops getting them and the ipsec VTI tunnel drops on router A even before the dead timer reaches 0. Is this default behavior, when OSPF is over a VTI interface if it doesn’t receive hellos is drops the tunnel?
I’m at a loss as to what is going on since it looks like only one neighbor stops receiving hellos, router A, for a brief period of time. This VTI tunnel is going over another provider’s FW and they have assured me the tunnel destination/source ips are wide open they also sent me the ACL and I can verify this. The weird thing is if I enable EIGRP it works great with no issues. On router B I am using the same source/ip unnumbered interface on multiple VTI tunnels to to other destinations but this shouldn’t cause any issues I don’t think. I have never had an issue like this and from what I can tell the router A just stops briefly getting hellos after 3 – 6 initial hellos and drops the protocol on the VTI interface. If I set the dead timer on router A long enough it will stop receiving hellos but stay up and then after a while you get “LOADING to FULL” as the hellos start coming in again. Again the tunnel goes over a cisco 800 which I have no control over it and a potential FW before that but I saw the ACL and ip is being allowed. I was thinking this could be a trolling issue on the FW but it doesn’t explain why EIGRP works. FYI I was having a recursive routing issue before but I have since fixed that and the issue still continues.
******** it turns out that i was using the same source ip on multiple tunnels. IPsec would get confused with packets coming in and would deliver packets to the wrong tunnel interface. This was solved but using the key command with a different key number on each set of tunnels with the shared profile command
"If more than one mGRE tunnel is configured on a router that use the same tunnel source address, the shared keyword must be added to the tunnel protection command on all such tunnel interfaces. Each mGRE tunnel interface still requires a unique tunnel key, NHRP network-ID, and IP subnet address. This is common on a branch router when a dual DMVPN cloud topology is deployed. "
Router A:
router ospf 1
router-id 10.213.22.2
passive-interface default
network x.x.97.26 0.0.0.0 area 0
interface Tunnel1
ip unnumbered GigabitEthernet0/1
ip virtual-reassembly in
ip tcp adjust-mss 1398
ip ospf network point-to-point
load-interval 30
tunnel source GigabitEthernet0/1
tunnel mode ipsec ipv4
tunnel destination x.x.173.109
tunnel path-mtu-discovery
tunnel protection ipsec profile VTI-to-NB
router B:
router ospf 1
router-id 172.17.2.6
priority 1
redistribute static subnets route-map Lan-static-RM
passive-interface default
no passive-interface Tunnel1
no passive-interface Tunnel4
no passive-interface Tunnel5
network x.x.173.109 0.0.0.0 area 0
network 172.17.2.6 0.0.0.0 area 0
network 192.168.1.47 0.0.0.0 area 0
interface Tunnel4
ip unnumbered GigabitEthernet0/2
ip virtual-reassembly in
ip tcp adjust-mss 1398
ip ospf network point-to-point
load-interval 30
tunnel source GigabitEthernet0/2
tunnel mode ipsec ipv4
tunnel destination x.x.97.26
tunnel path-mtu-discovery
tunnel protection ipsec profile VTI_NB_to_dorrance_prv
end
thanks P

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I haven't studied your config, but I can tell you I have production environment using OSPF across VTI (and GRE, and GRE/IPSec and DMVPN) tunnels without issue. I.e. so OSPF can be okay with VTI tunnels.

Interface between real instruments and macbook

Hi all,
I'm running a macbook and am keen to get recording in garageband. I have a guitar pedal, that I am unsure of whether or not I should connect to the macbook. ( Live thread: http://discussions.apple.com/thread.jspa?threadID=869286&tstart=0 ).
I was wondering what sort of audio interface equipment you would advise for use to plug the guitar, pedal, mic etc into the macbook for recording. I don't want to spend the earth on a solution, however, I am keen to get a quality, noise-free solution etc.
Cheers,
Dan

There is no problem plugging the output of the pedal into the line-in on your MacBook, the computer will not be damaged. Try that first and decide if what you record is what you desire, quality-wise.
If you find you still want an interface (and if you want to use a Mic, you do need one), take a look here:
http://www.bulletsandbones.com/GB/Interfaces.html

AP Payment Upload Using API or Interface

Hi ,
I had requirement to upload the AP payment information using API or Interface. I have the below code. But is showing some "Unexpected" error.
declare
p_num_printed_docs NUMBER;
p_payment_id NUMBER;
p_paper_doc_num NUMBER;
p_pmt_ref_num NUMBER;
p_return_status VARCHAR2(200);
p_error_ids_tab IBY_DISBURSE_SINGLE_PMT_PKG.trxnErrorIdsTab;
p_msg_count NUMBER;
p_msg_data VARCHAR2(200);
begin
MO_GLOBAL.SET_POLICY_CONTEXT('S',84); --- Apps intialize
fnd_global.apps_initialize(1823,20639,200); --- Apps intialize
IBY_DISBURSE_SINGLE_PMT_PKG.SUBMIT_SINGLE_PAYMENT(
p_api_version => 1.0,
p_init_msg_list => fnd_api.g_false,
p_calling_app_id => 200,
p_calling_app_payreq_cd => '13011',
p_is_manual_payment_flag => 'Y',
p_payment_function => 'PAYABLES_DISB',
p_internal_bank_account_id => 10000, -----12001,
p_pay_process_profile_id => 161,
p_payment_method_cd => 'CLEARING',
p_legal_entity_id => 23324,
p_organization_id => 84,
p_organization_type => '',
p_payment_date => sysdate,
p_payment_amount => 111,
p_payment_currency => 'USD',
p_payee_party_id => 91678,
p_payee_party_site_id => 45272,
p_supplier_site_id => '',
p_payee_bank_account_id => '',
p_override_pmt_complete_pt => 'N',
p_bill_payable_flag => 'N',
p_anticipated_value_date => '',
P_MATURITY_DATE => '',
p_payment_document_id => 1,
p_paper_document_number => '',
p_printer_name => '',
p_print_immediate_flag => '',
p_transmit_immediate_flag => '',
x_num_printed_docs => p_num_printed_docs,
x_payment_id => p_payment_id,
x_paper_doc_num => p_paper_doc_num,
x_pmt_ref_num => p_pmt_ref_num,
x_return_status => p_return_status,
x_error_ids_tab => p_error_ids_tab,
x_msg_count => p_msg_count,
x_msg_data => p_msg_data
commit;
DBMS_OUTPUT.put_line ( p_return_status || '---''---' || p_msg_data || '--''--' || p_msg_count );
IF p_msg_count = 1 THEN
DBMS_OUTPUT.put_line ( p_return_status || '---''---' || p_msg_data || '--''--' || p_msg_count );
ELSIF p_msg_count > 1 THEN
FOR i IN 1..p_msg_count LOOP
DBMS_OUTPUT.put_line ( i||'. ' || fnd_msg_pub.get (p_encoded => fnd_api.g_false) );
END LOOP;
ELSE
DBMS_OUTPUT.put_line (p_return_status);
END IF;
end;
If anyone knows the solution please respond quickly. This is quite urgent requirement. If I am not using right API then please suggest as well. This requirement for Oracle Apps R12
Regards,
Prakash

Hi,
Can you please advise if you had a response for your message.
Regards,
Sunil

Interface Adviser

Similar Messages

Maybe you are looking for