Interface test in PI 7.1

Hi Experts
I am working on a Proxy to SOAP (Syncronous) scenario, I am testing this scenario by creating the Claim at ECC, and the data comes into PI and it goes out to the external vendor
But I want to change the Request Message from Proxy to my own test message (Provided by the Vendor) and send it to the same web service
How can I test the scenario from End to End (at least from PI to Web service call), where should I need to give the test data to complete the testing
Please let me know
Thanks
PR

Well is according your receiver determination
SenderParty , Serder Service
ReceiverParty " your BPM" and the service.
the interface =(e.g REMADV.PEXR2002) and the namespace.
User and Password.
And paste the your XML Payload

Similar Messages

  • Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a product through telnet or serial interface

    Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

    If I understand correctly, you want to do the following:
    1. Create one or more tab-delimited files that specify a series of query strings (that LabVIEW will send to your products) and expected reply strings (that LabVIEW will look for in response to each query)
    2. Run your LabVIEW program (the test engine) and have it execute one or more test scripts from file using either TCP/IP or serial communication to your units under test
    3. Track how many of the queries are met with the expected response, and output an indication of whether each step passed or failed
    If this is close to correct, then I've attached a sample test file and LabVIEW VI as an example; I chose the TCP/telnet method because it allowed me to use the ni.com Web site to simulate my tes
    t hardware. If you happen to own the LabVIEW Internet Toolkit, there's a VI called "Telnet Play Script" in the Telnet palette that does something fairly similar using TCP. The same general model would also work for Serial communications.
    Hope it helps,
    John Lum
    Attachments:
    test_engine.zip ‏24 KB

  • Advice on constructi​ng a test engine and formatting a spreadshee​t test file to perform command line interface testing on a product through telnet or serial interface

    Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

    Hello j. smith,
    TestStand gives you the ability to create "sequence files" which are lists of tests to be run sequentially or in parallel. These tests can be written in any language: LabVIEW VIs, C/C++ DLLs, EXEs, ActiveX objects, .NET Assemblies, etc.
    You can run your TestStand sequence files from a command-line prompt using the following syntax:
    \bin\SeqEdit.exe" /quit -run
    This will launch the TestStand Sequence Editor (and optionally prompt you for TestStand login information if you have this configured), run your sequence file, then exit.
    If you're using the TestStand process model, it can output your results to a report file or database if you configure this. To use a TestStand process mo
    del to execute your sequence file, use the following syntax:
    \bin\SeqEdit.exe" /quit -runEntryPoint
    Here's an example:
    C:\>"C:\Program Files\National Instruments\TestStand 3.0\bin\SeqEdit.exe" /quit -runEntryPoint "Single Pass" "C:\Program Files\National Instruments\TestStand 3.0\Examples\Demo\C\computer.seq"
    Note that multiple sequences and sequence files can be specified on the command line.
    TestStand supports remote sequence execution using DCOM (Distributed COM), which is an east way to remotely execute tests. But as for running tests or commands through a telnet or serial interface, you would have need to check Windows documentation on how to execute command-line remotely like this.
    David Mc.
    NI Applications Engineer

  • SAP HR Interface Testing

    Dear all -
    I am a newbie to SAP HR module. I am going to work on a project where the areas concentrated in HR are - Organizational Management/Personnel Administration; ESS/MSS and Interface Testing.
    Could anyone please advise me as to what would Interface Testing involve? What would be the third party tools used?
    Also, please let me know what could be the scenarios that would be tested in Organization Management/Personnel Adm and ESS/MSS?
    Thanks very much -
    Shilpa Reddy

    Hi Shilpa,
    You have asked a question which is totally customer specific. Until unless some one knows the details of your customer it is very difficult to answer the question. Anyway here is the common guidelines.
    For Interface...
    1) First you have to identify the third party tolls which your customer will use.
    2) If the third part tolls are identified, then you check the sap standard and custom interface which are using in your sysytem.
    3) Check whether the interfaces are inbound or outbound and what type of data are send/received by the interfaces.
    4) Execute the interface and check whether you are getting the correct data or not.
    For org management..
    1) Check the org structure are correct or not.
    2) Test the scenarios related to org structure.
    3) Check whether PA OM synchronization is on or not.
    4) Test your customer specific scenarios.
    For ESS/MSS..
    1) Check the bank/address/own data change scenario from portal.
    2) Check the portal Forms.
    3) Check the ECM related thing to ESS/MSS.
    I think you should have test scripts for that.
    Thanks & Regards,
    Sandip Biswas.

  • SLOW Xbench User Interface Test

    Hi all,
    MBP early 2008 2.5GHz, 2GB RAM, 250GB HD (130GB free), 10.5.7 and all updates.
    Since I got this machine, it has not seemed any faster than my 867MHz TiBook running Tiger. Today I ran Xbench twice and it showed an extremely low User Interface Test result (12.91 at 59.25 refresh/sec).
    I know Xbench hasn't been updated for awhile, but looking at a few other Intel Mac scores, I didn't see any scores even close to this one.
    So, has anyone else run Xbench? Anyone care to give it a try and report results on that part of the test?
    Thanks
    (PS I've run all the maintenance I can think of, checked Activity Monitor, etc etc etc. Next step is to reinstall OS, but rather not if there's anything more to learn about this first.)
    (PSS First run I had Time Machine turned on and external FW HD connected, so disconnected that. Also, just remembered I am running File Vault, and wondering if that's the culprit.)
    Message was edited by: tjk

    no idea...
    but try to disable filevault...
    If you want to dream on the old days and to see what Apple don't want us to use now, make a ram disk (it will not be consistent after a reboot, as Apple prevent it... )
    try to run a xbench on it...
    yes, 908 ...
    try to run your hardisk benchmark.
    yes, only 27 or a little more...
    So, what all the buzz around with flash disk is just bullsh.t, as , since 1995 at least, Apple made RAM disk, and BOOTABLE until the G3...
    I'm quite sure that we could have a 400 % more quick os X sytem if we could run it on Ram disk...
    I used it for second life, as browsers can have another cache location (or, I didn't find how to do it)
    it's about 20 % faster, and it is not shocking the hard disk, as the more you write and erase, the more your disk work.
    Sorry to be a little of topic, but a Xbench thread could be good in that 'using your mac book pro , original" just to see how we can speed it a little bit, or not
    (I use "Make RAM Disk 1.0", no bug , on 10.4.11)

  • Interfaces Testing after upgrade

    Hi Gurus,
    How can I do the interface testing after an upgrade. Wht is the procedure, If any one have document on the same can please send it to me on [email protected]
    Thanks in Advance.

    Hi Mahesh,
    There is no utility for interface test from sap directly. But depends on which type of sap interface running, pls check with your application vendors, if available.
    regards,
    Amit lal

  • TPM 1.2 UEFI Preboot Interface Test Fail

    Dears,
    My platform is Asus H97-ME, the TPM chip is NPCT420
    It encountered a test fail in TPM 1.2 UEFI Preboot Interface Test.
    Fail was occured in Run Test, and the result is PreOSTestWrapper.ParseAndLogFile Fail
    Did anybody knows how to pass this failure? Why does it happen?
    Thanks a lot.

    Make sure that the secure boot is turned off.

  • Interface test fails during mapping - Resource not found

    Just upgraded from 7.1 SP8 to EHP1 SP3. Testing of the existing interfaces has been successful. I have created a very simple HTTP -> RFC Sync interface to complete the testing. When testing it in the integration builder I get the following message.
    +Unable to find resource 5e0ce8a0-b99a-11de-9eb4-c576ac120353 in the following software component versions: urn:xxxxx.com:PI71com/sap/xi/tf/_MM_ONE_.class-1+
    I've checked cache status overview in the ID and ESB and the updates were successful. I've checked the cache (SXI_CACHE) and the objects are there - correct object ID's. I;ve also performed a full cache refresh and that works. I then recreated the objects under a new SWCV and Namespace and get the same problem. It looks like the mapping object cannot be found.  Checks of SDN and SAP help have mentioned a cache problem but we've ruled that out.
    Any help you can offer would be appreciated.

    I've just noticed something unusual about the entry in SXI_CACHE. Under mapping the type of mapping appears as 'JAVA_JDK'. When you click on the drop down box next to the entry the possible types of mappings are...
    R3_ABAP
    JAVA
    Xi_TRAFO
    XSLT
    RS_XSLT
    I'm not sure if this is an issue or not. I've checked SDN and SAP SUPPORT and I can't find anything.

  • Role of a SAP PA/OM functional consultant in Interface testing?

    Hi all,
    Hope you are doing excellent? I just wanted to know what is  the role of a functional SAP PA/OM consultant in testing interfaces. and what kind of interfaces will   the functional consultant will be give to test.
    Thanks a lot,
    Jess..

    Hi,
    As a functional consultant you will review test cases and run it on interface and verify setails are coming out accurately as an output from interface based on functional specification you have developed.
    Thanks,
    Ameet

  • XI Interface testing..

    Hi,
    I would like to know how can we test our XI interfaces.
    Is there any standard tools available ?

    Hi,
    1. If you want to test your scenario at mapping level then you can go to the test tab in your message mapping and provide the sample values and test it.
    2. If you want to test the complete scenario, then you can do that in configuration testing at ID. i.e goto tools--> test configuration provide the details of your interface and test whether you have configred correctly.
    3. If you want to test at the RWB, then go to integration engine and in the test tab provide the payload along with the interface details and test it. you can see the message in moni.
    4. If you want to do the complete end-end testing assuming that you are receiveing a file from a ftp server then drop your file there and keep pooling as per the configuration in the communication channel.
    regards,
    Nithiyanandam

  • Getting error in Component Interface (Test Component Interface) --

    Hi,
    I created new CI for workers/Consumers in peoplesoft CRM .. when I am testing the same CI using test component interface property ... I am getting the below error.
    BO Search cannot be performed in the Component Interface. (18076,5115)
    *Error loading Component Processor {RD_WORKER_CI} (91,24)*
    Failed to create the Component Interface (91,61)
    Even though I tested tested for delivered Component Interfaces also.. for those CI's also I am getting same errors. (RD_WORKER_CI_CLA, RD_WORKER_CI_AAF)
    I created some of the CI's in HCM and ELM module and tested ... In those modules working fine but not working CRM ... getting the above errors.
    Can any one please help me on this.
    Thanks
    -Venkat

    There is RBQ_BOSRCH_QCCREATE.Runtime.Control.Controller.OnExecute PeopleCode (search for string "18076, 5115" in this PeopleCode) that is preventing your CI to work. I tried commenting this PeopleCode but it creates other problems. I am not sure why this code is there.
    There is another component that PeopleSoft delivers RD_WORKER_CI which you can use to build your CI. I am not sure if it will populate and update all the fields that you needed in the first place.
    Let me know if any other solutions worked for you.

  • Simulate mouse click and do application interface test

    We have a application system with GUI and I need to implement a auto-test system. After launch the application, the interface has two frames. The left is the navigation frame, it display the contents of a book; the right is for display detail text. In the right frame, there are links(just like web) to lead user to other document after user clicking.
    We need a test system to check the systm. So, my basic idea is to model the human action. Create the mouse object and modeling human click and check if the link display the correct content. But, I don't how to do it.
    Can anyone give me hands?
    Thank you
    my email: [email protected]

    Hi,
    first you have to know, which events can happen, second the listener-methods must be accessible.
    with this premise you can do following:
    - construct the event you want to use i.e for mouse
    MouseEvent me=new MouseEvent(this, 1001, System.currentTimeMillis(), 0,50,50 ,1, false);- call the method which should receive this event
    - wait what happens
    regards

  • Interface testing

    hello everyone, hopefully this is a pretty simple question.
    I have just created and interface and a class with a bunch of objects in it. However i cannot tell if everything works, it compiles of course, but the way it is set up it return nothing. How should i go about making another class to test all those methods to make sure they work??
    here is what i have so far..
    public class Money implements Bank
         private int dollar, comb;
         private boolean none = true;
         private int key = 1;
         private boolean Locked;
         String text;
         public void Money(int InitAmount){
              dollar = InitAmount;
              key++;
              Locked = false;}
         public void setCombination(int combin){
              if (none){
                 comb = combination;
                   none = false;}
         public boolean locked(){
         return Locked;}
         public void lock(int combin){
              if (combin == comb)
                   Locked = true;}
         public void unlock(int combin){
              if (combin == comb)
                 Locked = false;}
         public String toString()
              if (Locked == true);
                    text = ("dollar amount " + dollar + " serial " + key);
              if (Locked == false);
                    text = ("Sorry no electronic money ");
           return text;     
    }and here is my interface
    public interface Vault
       void setCombination (int combin);
       boolean locked();
       void unlock(int combin);
       void lock(int combin);
    }what do you think???

    sorr5y everyone i posted this twice by accident, just ignore this one and check out the other one if your interested!!!

  • Interface and conversion testing of SAP environments with Master Data

    Hi guy's
    Please let me know if some one of you know about SAP Conversion Project. Below you have more description:
    - testing of Interfaces from Legacy Systems
    - testing of conversion programs used in the conversion or transposition of data from legacy systems
    - data cleansing activities associated with conversion
    - identify and populate various SAP environments with Master Data necessary for both conversion and interface testing
    Any detail info in that and what kind of knowledge you need to have in some of project will be useful.
    Thanks in advance
    Adeel

    Hi Yannick,
    I am trying to do the exact same thing. Have you gotten any further on this issue?

  • Input and CRC errors on ASA 5505 outside interface

    All,
    I see input and crc errors on my ASA 5505  eth0/0(outside) interface and packet drops. There is very slow connection though we have 20mb line. ISP also sees the issue on the Lan interface side. We have the speed and duplex configured same on both ISP and our end.
    I am suspecting if this is Physical cable issue. Please suggest.
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
            Full-Duplex(Full-duplex), 100 Mbps(100 Mbps)
            Input flow control is unsupported, output flow control is unsupported
            Available but not configured via nameif
            MAC address 001a.b4c9.f3d9, MTU not set
            IP address unassigned
            158138067 packets input, 141061681082 bytes, 0 no buffer
            Received 183037 broadcasts, 0 runts, 0 giants
            19642 input errors, 19642 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 pause input, 0 resume input
            0 L2 decode drops
            144684 switch ingress policy drops
            124291353 packets output, 38197278051 bytes, 0 underruns
            0 pause output, 0 resume output
            0 output errors, 0 collisions, 0 interface resets
            0 late collisions, 0 deferred
            0 rate limit drops
            0 switch egress policy drops
            0 input reset drops, 0 output reset drops

    Hello Ravi,
    This kind of issues CRCs/ Input Errors are tipically known as L1 issues so make sure you check the cable and if that does not make a difference change the port on each side to see if there is a difference.
    Unfortunetly the ASA does not support the Time-Domain Reflectometer feature so we must do the test of L1 by ourselfs.
    Can you clear the counters of the interface, test the changes provided and provide us some feedback?
    Looking for some Networking Assistance? 
    Contact me directly at [email protected]
    I will fix your problem ASAP.
    Cheers,
    Julio Carvajal Segura
    http://laguiadelnetworking.com

Maybe you are looking for