Internal Error 401
Hello,
after setting up a new scenario in the integration builder, I tried to test it over Tools > Test Configuration. While Receiver Determination I get the following Internal Error:
<b>HTTP connection to ABAP Runtime failed.
Error: 401 Unauthorized
URL: http://<myhost>:8000/sap/xi/simulation?sap-client=
User: XIDIRUSER</b>
I allready checked, if the simuation engine is running. It works fine. I think the problem is the sap-client parameter in the URL. As you can see, it is not set. But where can I set it? Or am I on the wrong path?
Thanks for any help in advance.
Robin
Hi Robin,
make sure that no user is locked. Make sure in SU01 and also check the administration part of the integration builder. I would also suggest you to double check again whether the passwords in SU01 and exchange profile match exactly. I would suggest to enter these in capital letters.
Additionally also make sure that the user you are using to talk to XI has the role SAP_XI_APPL_SERV_USER in XI.
Regards,
abhy
Similar Messages
-
Workflow internal status - Suspended - Error 401
Hi All,
I have created a simple workflow in SharePoint 2013 Designer
When I start the workflow manually, and when I click on it to see the status of workflow it shows - Internal Status - Suspended
Details are as follows :
RequestorId: 16f7a305-4450-46c2-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"error_description":"The server was unable to
process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send
the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There has been an error authenticating
the request.\";category=\"invalid_client\""],"SPRequestGuid":["16f7a305-4450-46c2-a317-044d8178b412"],"request-id":["16f7a305-4450-46c2-a317-044d8178b412"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["3130"],"SPIisLatency":["1"],"Server":["Microsoft-IIS\/8.5"],"WWW-Authenticate":["Bearer
realm=\"e57a12ef-af95-439f-ab00-b14d4c799098\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]4c799098\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Mon, 20 Apr 2015 06:57:51 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
This is not a system account, even then it is giving the same error.
My User Profile services are also working fine, Times & Admin service are also working fine
Please helpHi,
Please do as follows:
1.Navigate to the site that the workflow is on in SharePoint 2013 Designer.
2.Go to All Files -> Lists
3.Right click on Workflow History
4.Select Properties
5.Click on Permissions for this list under the ‘Customization’ section (This should open up the edit permissions page in the browser)
6.Break inheritance on this list by selecting Stop Inheriting Permissions in the new opened browser window
7.Use the check box next to the appropriate group (probably the visitors group) to select the group that needs updated permissions
8.Select Edit User Permissions
9.Grant the group 'Contribute' permissions
10.Select OK
More information is here:
https://sharepointcreations.wordpress.com/2014/02/18/sharepoint-2013-workflow-cancels-automatically/
If the issue still exists, please check the link below with the troubleShooting steps:
http://blog.bugrapostaci.com/2014/02/01/sharepoint-2013-workflows-are-not-working-issue/
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
RichHi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
JSF problem - An internal error occurred during: "Updating JSP Index".
Hello Friends,
I am facing following problem in ecplise. Whenever I open JSP page or whenever I save my jsp page.
!ENTRY org.eclipse.core.jobs 4 2 2008-06-14 13:54:24.151
!MESSAGE An internal error occurred during: "Updating JSP Index".
!STACK 0
java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/TagLibraryInfo
at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperCache.createNewHelper(TaglibHelperCache.java:112)
at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperCache.getHelper(TaglibHelperCache.java:97)
at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperManager.getHelperFromCache(TaglibHelperManager.java:43)
at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperManager.getTaglibHelper(TaglibHelperManager.java:36)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.addTaglibVariables(JSPTranslator.java:684)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.translateXMLNode(JSPTranslator.java:997)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.translateRegionContainer(JSPTranslator.java:843)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.translate(JSPTranslator.java:734)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslationAdapter.getJSPTranslation(JSPTranslationAdapter.java:131)
at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchDocument.getJSPTranslation(JSPSearchDocument.java:112)
at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchDocument.getPath(JSPSearchDocument.java:149)
at org.eclipse.jst.jsp.core.internal.java.search.JavaSearchDocumentDelegate.<init>(JavaSearchDocumentDelegate.java:30)
at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchSupport.createSearchDocument(JSPSearchSupport.java:401)
at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchSupport.addJspFile(JSPSearchSupport.java:295)
at org.eclipse.jst.jsp.core.internal.java.search.JSPIndexManager$ProcessFilesJob.run(JSPIndexManager.java:262)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:58)
I am using Ecplise 3.2.0
JSF 1.1
Tomcat 5.5
JSP2.0
Any solution for this?
Thanks & regards
AbhijaiAbhijai wrote:
java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/TagLibraryInfoThis exception is been thrown if the given class was available in classpath during compile time, but not during run time. The solution is obvious: make sure that the given class (or at least the JAR file with the given class) is available in the classpath during run time.
By the way, why did you think that this problem is related to JSF? -
Internal error in Salary Statement service
Hi
Someone can help with this issue. We are not able to get the payslip. In R3, we use a form created with PE51 and we have a variant for this. I already updated feature EDTIN with the variant name and HRFOR with $CEDT$ for C ESS.
Following error is showing when we request the payslip.
Not sure if it is a authorizat. problem
**com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Internal error in Salary Statement service: PYXXREAD_PAYROLL_RESULT 00019354 00547**_
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:495)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:346)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.execAction(FcRepFramework.java:274)
atcom.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.execAction(InternalFcRepFramework.java:247
at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.execAction(FcRepFrameworkInterface.java:146)
com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.execAction(InternalFcRepFrameworkInterface.java:200)
at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.execAction(InternalFcRepFrameworkInterface.java:260)
at com.sap.xss.hr.rem2.selection.VcRem2Selection.execAction(VcRem2Selection.java:183)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.execAction(InternalVcRem2Selection.java:234)
at com.sap.xss.hr.rem2.selection.SelectionView.onActionToggleVisibility(SelectionView.java:169)
at com.sap.xss.hr.rem2.selection.wdp.InternalSelectionView.wdInvokeEventHandler(InternalSelectionView.java:247)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)Hi,
Can you please check that in "pc00_m08_cedt" you can see the remuneration statement for the same PERNR. -
Mail server polling Internal Error
Hi
I am doing mail polling server... i got following error in message monitoring....
Error Category :: Internal Error
Error Code :: HTTP_RESP_STATUS_CODE_NOT_OK
please help me
thanks & regards
Ravi Shankar BHi Ravi,
Please take a look at these..
HTTP_RESP_STATUS_CODE_NOT_OK - 401 Unauthorized
HTTP_RESP_STATUS_CODE_NOT_OK 404 Error
HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Loading data into R/3 through XI
cheers,
Prashanth -
"investiga​te previous internal error" every time I start LV 8.2.1
Hi,
Every time I start LV 8.2.1 I get a message "The last time you ran LabVIEW, an internal error or crash occurred at fpsane.cpp, line 401" and it asks if I want to investigate now. I don't have any problems while running the application, compiling it or building an installer. Does anyone have any idea what this is and if it's important?
Thanks,
Danielle
"Wisdom comes from experience. Experience is often a result of lack of wisdom.”
― Terry PratchettAlthough the VI runs, it may have a strange entry somewhere.
I did get that message a couple of times. From what I can recall it was when running omething & I had to kill the execution, or shut down LV completely. Upon re-start of LV a similar message popped up. The message did not re-appear at the next start. Maybe I inadvertently fixed it without knowing..
Try loading your VI, running it once. Saving it. Shut down LV. Restart LV. And check to see if the message continuous to appear. (you may have to repeat the steps once).
Oh... Do you have any Disable Structure which has some unfinished code iside it? I do recall that... Who knows.. (???)
RayR -
I configured OBIEE to work with AD authenticator and AD authentication works fine. My AD users can login with their credential. I am having issues with Kerberos authentication. My keytab looks fine and kinit is successful too and do not have any duplicate SPNs. After configuring Kerberos, "I am getting error 401 Unauthorized" .
I have an AD user bisystem which I generated SPN and key tab looks fine. My other AD users belong to AD group "Technical".
What should be the principal-name in weblogic.xml?
I have put <principal-name>bisytem</principal-name>
<principal-name>Technical</principal-name> in weblogic.xmlfrom bi_server.out:
default etypes for default_tkt_enctypes: 17 23 3 1 23.
Pre-Authenticaton: find key for etype = 3
AS-REQ: Add PA_ENC_TIMESTAMP now
>>> EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
>>> KrbAsReq calling createMessage
>>> KrbAsReq in createMessage
>>> KrbKdcReq send: xxxx timeout=30000, number of retries =3, #bytes=270
>>> KDCCommunication: kdc=xxxx #bytes=270
>>>DEBUG: TCPClient reading 106 bytes
>>> KrbKdcReq send: #bytes read=106
>>> KrbKdcReq send: #bytes read=106
>>> KdcAccessibility: remove xxxxx
>>> KDCRep: init() encoding tag is 126 req type is 11
>>>KRBError:
sTime is Wed Apr 15 13:32:41 EDT 2015 1429119161000
suSec is 553936
error code is 14
error Message is KDC has no support for encryption type
realm is xxxx
sname is krbtgt/xxxxx
msgType is 30
[Krb5LoginModule] authentication failed
KDC has no support for encryption type (14)
Any insight??? -
Debug Weblogic 10.0 with 2-Way SSL: Error 401--Unauthorized
Hi,
I am working on Weblogic 10.0 with 2-Way SSL configuration. User uses X.509 certificate to login into the system. I have a default UserNameMapper which maps the CN to the a user name in the LDAP user store. User can login without problem. But after user login, when he tries to hit a new page before the original page fully loaded, he will get a "Error 401--Unauthorized".
I turned on the Weblogic security debug and got the following warning with stack trace. Can anybody help me to figure out what's wrong? How do I troubleshoot this issue? Any help is really appreciated.
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecurityAtz> <BEA-000000> <com.bea.common.security.internal.service.AccessDecisionServiceImpl.isAccessAllowed AccessDecision returned PERMIT>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecurityAtz> <BEA-000000> <com.bea.common.security.internal.service.AuthorizationServiceImpl.isAccessAllowed returning adjudicated: true>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <write APPLICATION_DATA, offset = 0, length = 167>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <write APPLICATION_DATA, offset = 6, length = 1518>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: WARNING, Type: 0
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.closeWriteHandler(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.close(Unknown Source)
at javax.net.ssl.impl.SSLSocketImpl.close(Unknown Source)
at weblogic.socket.SocketMuxer.closeSocket(SocketMuxer.java:449)
at weblogic.socket.SocketMuxer.cleanupSocket(SocketMuxer.java:795)
at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:759)
at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:700)
at weblogic.servlet.internal.VirtualConnection.close(VirtualConnection.java:327)
at weblogic.servlet.internal.ServletResponseImpl.send(ServletResponseImpl.java:1431)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1375)
at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <close(): 14324285>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 7034906>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 19096081>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <18691735 SSL3/TLS MAC>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <18691735 received HANDSHAKE>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ClientHello>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <Will use default Mac for algorithm MD5>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.5 for algorithm RC4>
<Oct 31, 2008 7:34:27 PM GMT> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Mac: SunJCE version 1.5 for algorithm HmacMD5>
Thanks,
WayneI decided to use pki with jaas/custom authentication provider to solve this problem. It works. If you want more details, please let me know.
-
Multiple installs of causing Data provider internal error (-3000) on Open
Hi,
We have an application written against Oracle ODP 10.1.0.401 that's been deployed out on a web farm working great for some time now, however recently another area has asked to get ODP for 11g installed on that server. The install originally broke our application, but we were able to resolve most of the issues after following all of the appropriate "PATH" reordering and registering appropriate dlls. In fact, we finally got a server completely back up and running both versions with no issues.
Unfortunately, it's a load-balanced server, and while one of the two servers is working correctly, the second seems to be having issues with specific parts of the install. We're trying to fix it on the second server now, and will be doing the same install shortly in our production environments.
I was able to break the error out and create a very simple test app to eliminate as many variables as possible. It appears to be an issue with the driver when we enlist into a Distributed Transaction.
The following code works fine:
var connection = new Oracle.DataAccess.Client.OracleConnection(connectionStringBase + "Enlist=False");
connection.Open();
While this code does not:
var connection = new Oracle.DataAccess.Client.OracleConnection(connectionStringBase);
connection.Open();
In both examples, connectionStringBase is Data Source=...;Validate Connection=true;User ID=...;Password=...; (where ... represents masked values). I've also tried "Enlist=True" in case the default was a problem, but it also fails.
The exceptions we're getting on the server happen in the .Open() call. The stack trace is:
[OracleException: Data provider internal error(-3000) [System.String]]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure) +779
Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) +41
Oracle.DataAccess.Client.OracleConnection.Open() +3338
Default.Page_Load(Object sender, EventArgs e) in C:\Code\Oracle11gTest\Oracle11gTest\Default.aspx.cs:13
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +43
System.Web.UI.Control.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +74
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2604
I've read a few articles on this particular error and found that it's generally considered an ambiguous error with many potential causes, most of which I've been trying to test and rule out. While I don't have direct access to the server, I've been working with someone who does and they have compared registry settings and registered dlls, and have told me that the 2 servers match, and we've already re-installed the 10.1 drivers hoping it would help, but at this point we're stumped. I've read that it's possible that the COM+ install could have become corrupt, but what confuses me is that just prior to the 11g install, everything works great, and after doing no more than an ODP 11g install, it breaks. Do you have any advice or suggestions we could try?
Thanks in advance for any insight you might have!
~JeffIf I read your post correctly that this is a "everything is equal as far as we know, but box A works and box B doesn't" type situation, my first suggestion would be to get Process Explorer from http://sysinternals.com, and compare the loaded modules between the working and non-working servers. You'll probably find that you're not using the software you think you're using, or have mismatched dlls across homes, or something to that effect. Once you figure out what the difference between the two is, correcting it will probably be the easy part.
Hope it helps,
Greg -
Error while creating SC: Internal Error - termination type TH_RES_FREE
Hi I encountered this error while creating a SC. All attributes for this user are maintained and the "check user" transaction does not give any error.
Amol Mate
Error when processing your request
What has happened?
The URL http://punhjwsapsrm:8000/sap/bc/gui/sap/its/bbpsc02/! was not called due to an error.
Note
The following error text was processed in the system SSS : Internal Error
The error occurred on the application server PUNHJWSAPSRM_SSS_00 and in the work process 1 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SSS in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PUNHJWSAPSRM_SSS_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server PUNHJWSAPSRM_SSS_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:100-u:PTEST -l:E-s:SSS-i:PUNHJWSAPSRM_SSS_00 -w:1-d:20051121-t:171904-v: TH_RES_FREE-e:Internal Error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework TeamHi Amol,
First of all the sicf transaction is to be used only if you use the internal ITS.
Now you have to put an external breakpoint in the source code of the ABAP Program or FM you want to debug , one of these in your case :
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Then launch the transaction in IE, once the program reaches a breakpoint, you'll get the ABAP debuger in IE.
Regards.
PS: if it doesn't work, put the parameter ~generatedynpro in BBPGLOBAL service to have it applied to all BBP transactions
Vadim -
Internal error occurs in background job scheduling
Hi Experts,
We are facing an error message "Internal error occurs in background job scheduling" while trying to execute a custom report(Z report) in background in SA38.
Please find the following observation on our side on this message.
1) This message is not coming for only one report not for others.
2) SU53 screen shot shows that SE38 check is failed, but the weird thing is not happening for other report.
3) Persons having SE38 auhtorization are able to run this report.
Please advise.
Thanks in advance,
VivenWhat is the message ID and number? Have you tried OSS search and debugging?
What does this program do, in a nutshell? -
Internal error while overwriting a charecteristic value in a class
Hi,
I am overwriting a charecteristic value in a class with a change master.
In CL02 I entered the class and the chnage number and entered in edit mode.
Then I selected the charecteristic view and selected the specific charectristic which value I need to overwrite and then clicked on "Overwrite Value" button.
Now the system has found an internal error: the required characteristic data was not found in characteristics maintenance.
Charecteristic data not found: Internal Error
Please tell me how can I get out of this error.hi,
Please check whether the overwriting indicator check box in character tab is select or not.
It should be flagged.
Thanks & regards
Reddiy. -
ORA-00600: internal error code, arguments: [ktsircinfo_num1]
While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204hi
read metalink ID - 153788.1
CHeers -
Error while transporting objects:Internal error during pvc call: Parameter
Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
YounusHi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM
Maybe you are looking for
-
I just did a software update and my mailbox will no longer open. Can anyone help me?
-
Error during last attempt to refresh cache in tranaction sxi_cache
Dear Team, We are geting below error , while executing sxi_cache transaction . please suggest . Status of Runtime Cache. Cache content is up-to-date Error during last attempt to refresh cache , wile double clicking this , we found below log . Thrown:
-
HT2731 your request is temporarily unable to be processed. Please try again later
Let's see if anyone has any ideas here. When I went to create an account on iTunes, I can get all the way to the credit card screen and then when we click "done" and pop up window comes up and says "your request is temporarily unable to be processed.
-
Turning off sync without loosing music
After a year of managing my own music transfers I made the mistake of using iTunes sync to give my iPod a fresh reload to make sure all my edits to the library were up to date. Now I can't turn off sync without iTunes threatening to erase everything
-
Different ways to mount a directory?
I'm a little confused on the different ways to mount a dirctory such as /usr in a non-global zone. I could either do one of the following: add inherit-package-dir set dir=/usr or I could add fs set dir=/usr set special=/usr set type=lofs I'm sure the