Internal mail size, External mail size

Hello,
I am using JMS 6.3!
One of my customer has 2 requirements
1. Can we have mail users who would be allowed to send mails internally only and some users allowed to send internally as well as externally
2. Can we have, users sending mails to have different message size limit to one sending externally. Ex: Internal mail size 5mb and External Mail size 2mb
Thanks in advance
Raj

unicsguru wrote:
One of my customer has 2 requirementsWhilst these requirements may sound simple enough they can actually be very tricky to implement depending on the environment.
1. Can we have mail users who would be allowed to send mails internally only and some users allowed to send internally as well as externallyAre your email users able to send emails via controlled webclients such as UWC/Comms Express and Messenger Express or are they also able to upload emails using clients such as Mozilla Thunderbird?
2. Can we have, users sending mails to have different message size limit to one sending externally. Ex: Internal mail size 5mb and External Mail size 2mbPer-user quota's can be used to override the default quota sizes set on channels but it doesn't differentiate between the destination of the email.
http://docs.sun.com/app/docs/doc/819-2650/6n4u4dtqp?a=view
"Source block limits can also be specified on a per sender basis by specifying a user LDAP attribute with the MTA option LDAP_SOURCEBLOCKLIMIT, and adding this attribute to the senders LDAP entry. Source block limits are also supported based on the sender�s domain. Specify a domain LDAP attribute with the MTA option LDAP_DOMAIN_ATTR_SOURCEBLOCKLIMIT, and adding this attribute to the sender�s domain LDAP entry. There are no defaults for either of these values."
If you wanted to apply the internal/external limits globally (as in the limit applies to everybody but certain users could 'override' with source-limits) you could to this by setting the default quota to 5MB (so this would apply to internal emails for example) and then set a 2MB blocklimit on the tcp_local channel so that 'external' bound emails get a greater restriction.
Regards,
Shane.

Similar Messages

Sending mail to internal mailadres to external smtp

Hi,
I must have 1 email address from my email-domain (intern and external) that always send the mails to the external smtp-server.
example:
mail domain is novellrocks.com
email address create is [email protected]
So when we send internal our external een mail to [email protected] it will be deliverd to the mailbox.
But for this mailbox I explicit wants that the internal mail is first send to an external smtp server thats relay it to the gwia and then delivers its to th mta and then to the po and to the mailbox.
In the past you could send een mail to gwia:[email protected] so it was deliverd external and then get it back through the gwia.
Thanks

Hi,
Can you tell me how exactly?
I have tried gwia:email-address but that does not work.
I'm also not shure that it's leave the site externally and not just reenter the smtp-server.
Originally Posted by mrosen
Hi.
On 13.03.2012 18:26, rniesen wrote:
> In the past you could send een mail to gwia:[email protected] so it
> was deliverd external and then get it back through the gwia.
That still works.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
Untitled Document

Sending Mail: To internal mail adress OK, external mail address KO

Hi everybody,
I guess this is no XI/PI problem, but I hope some of you had the same problems.
When we are using mail receiver adapter sending an internal mail is OK but if we use an external mail adresse like mister.sample@gmx. de the mail is not received.
We used different external mail adresses to obiate that the problem is not the external mail server.
We use inhause LOTUS NOTES.
The mail adapter uses the mail package.
Any ideas?
Thanks
Regards
mario

Hi Ravi,
now its clear. musunderstanding. As I wrote: The message was already received by LOTUS NOTES. But it is not send to an external mail adress.
There is no error in RWB
Regards mario

SBS2003 monitoring/reporting without using internal mail server?

Client is running SBS2003 and for certain reasons, is not running internal exchange. All Exch services disabled and need to stay that way.
Question; is it possible to configure the server somehow (registry, etc) to point the email to an external SMTP server instead of the internal mail server? We need to get the performance reports but aren't allowed to enable exchange.
Thanks!
Charlie

As best I can recall, in the SBS 2003 era..the reports are acutally emailed using the SMTP service and not exchange.   No information has ever been provided from the MS Product team on how to make mods ot this.
But because of integration of SBS when you indicate the users to send to, it's looking at the FQDN and if its the one supplied during the CEICW wizard, then it's trying to send that to an exchange mailbox.   Have you tried running the wizard and
supply an outside pop3 address?  (not the hosted exchange) Does the message arrive?
Cris Hanna [SBS - MVP] (since 1997)
Co-Contributor, Windows Small Business Server 2008 Unleashed
http://www.amazon.com/Windows-Small-Business-Server-Unleashed/dp/0672329573/ref=pd_bbs_sr_1?ie=UTF8&s=books&qid=1217269967&sr=8-1
Owner, CPU Services, Belleville, IL
A Microsoft Registered Partner
MVPs do not work for Microsoft
Please do not submit questions directly to me.
<Charlie Kaiser> wrote in message
news:[email protected]...
No, I'm really not sparring with you. I'm just removing the irrelevant factors from the conversation.
If you really have to know, their hardware is somewhat underpowered for the utilization it is receiving. The client is on hard times and cannot afford to upgrade the server hardware, nor can they afford a second server. Rebuilding their domain onto W2K3/W2K8
standard is also too expensive a project for them.
They have hosted external exchange and have for quite some time. They are happy with it and don't want to change. The server, after we took it over and tuned things for them, works fine. They experience almost no downtime and performance is adequate given
the current configuration. But adding any additional load to the server results in performance issues, including memory and disk space. Adding an additional 5% load on the server for exchange right now is not an option for us or them. They do not want nor
need exchange running internally.
So it returns to the original question; is there any way to simply point the outbound email to a different SMTP server? Somewhere, the monitoring component says "send this information by email; connect to SMTP." If there's a way to modify that easily, we
will do so. If there is not, then we'll probably just shut off the SBS monitoring and use a 3rd party tool intstead. But pointing SMTP is possibly simpler than making those changes.
As a small-business consultant, we spend a lot of time trying to help small companies do things as cheaply as possible. For many companies, spending a few grand on a server or project is absolutely out of the question these days. So we do what we can. The
solution you are pushing can work fine for a larger company that has a healthy IT budget. But not in this case.
Cris Hanna, Microsoft SBS MVP, Owner-CPU Services, Belleville, IL

OT: Internal Mail Server

Anyone had dealings with internal mail-servers, specifically
what value
are they to a small company of say 10 people?
Is it not just as easy to set up outlook/outlook express on
those 10
workstations to recieve and send mail?
The question really is. What benefit are mailservers in a
small office?
Cheers,
Os.

Joe Makowiec wrote:
> On 22 Jan 2007 in macromedia.dreamweaver, Osgood wrote:
>
>
>>Hummm....I think this client was probably sold one
when they didn't
>>really need it. Now it's creating extra hassle to
make it communicate
>>with the external mail-server :(
>
>
> One thing you're going to find is that unless they
bought connectivity
> which specifically permits mailservers, one of several
things may be
> happening:
> - The ISP may block port 25, thus rendering the
mailserver unusable
> - The IP address that the server is on may be on a
blacklist somewhere
> because it's in a dynamic IP block (one that's assigned
dynamically to,
> say, your average home user)
> - The ISP hasn't established a rDNS (reverse DNS) for
the mailserver or
> the whole IP block
>
> You can get more information on this, particularly the
last two, by
> doing a web search for [RBL check] (RBL=realtime
blackhole list)
>
> You may be able to get around this by using the
mailserver for
> incoming, and setting up to use the ISP's SMTP server
for outgoing.
>
> If they don't have the technical expertise, they may
want to consider,
> as you propose, just using a hosting provider's mail
services.
Yeah it was becoming a big headache. I'd already tested email
through
the conventional channels, outlook express and everything was
running
smoothly. Then in comes this internal mail-server.
Anyway after several phone calls to tech support I finally
got one that
actually knew something. The simple problem was a catchall
email address
had never been intially set up on their severs, so nothing
was being
caught and sent on.
Damn silly mistakes take hours of my time to solve!

Configure LAMP stack to use internal mail relay without....

Does anybody know of a way i can configure my new LAMP stack to use the companys internal mail relay without having to implement postfix, or sendmail? I did already try to implement send mail recently, and its very confusing to me since i have never set up a mail server, and i tried to implement postfix, SOHO i think was the wiki i used, and that never got done either. It seems incredibly cryptic to someone who even has tons of server experience, just not the email portion. Maybe the wikis are just written for those who have more experience in making SSL certs, and being more versed in MX records, and DNS for email specific things. etc...
Since i have not successfully set up a mail server thus far, i dont have enough general mailer / experience to understand the wikis on setting up Sendmail, etc...
My company asked me if i could just use their internal mail relay instead. I would like to know if i still need to set up sendmail to allow PHP mail() function to send out mail, or if theres some configuration somewhere that i can adjust so it can use the existing internal mail relays.
Note, the only thing im trying to achieve here is to get my apps to send out emails for login password management, and error logs.

In my experience an SMTP server is preferable to sendmail/postfix as it is far more portable and robust... (in a web environment) many webhosts, for example, pay no heed to the configuration of sendmail - so code that runs on one host fails on another. PHP mail() can be leveraged to use any backend you like but this typically requires root access (or at least permissions beyond those offered on typical hosting services), and, as said above, does not allow for any useful level of error reporting.
Swiftmailer is (generally) my weapon of choice - unless the particular project has additional PEAR dependencies/requirements that mean it makes sense to stay within the same codebase... not that it (PEAR) is always that consistent anyhow
I can't really offer much in the way of help with cron integration as that is not a route I have taken - it should think it would be pretty trivial (sic )to implement as you build your script... swiftmailer has some pretty neat "live address" checking routines - have a dig through the docs
Last edited by satanselbow (2013-12-17 09:49:13)

How can attach a sales order link into an Internal Mail - Workplace.

Hello, is there somebody can give me some tips to do this.
I need to attach a link of a sales order into a message of an internal mail (workplace).
When a sales order is blocked by credit, one mail sent to the representative credit manager.
The subject of the mail already have the number of the sales order (&VBAK-VBELN&), BUT I don't know how to attach the link of a sales order. The idea is the user that will read the mail can clic the link to display the sales order.
Thanks for your help,
JEOS.

Hi Jeos
While maintaining condition record VV11 with transmission medium Internal Mail you will get the option attach file then you can attach that file and send internally to the other user . But you cant attach the sales order , you convert the sales order data into an excel file and then upload that excel file and then send to the other user
Regards
Srinath

Credit manager & credit Represtative - Auto intimation thru internal mail

Hi
In credit Management,Automatic credit control ,if a customer is blocked due to credit limit ,can these details be send to credit manager & credit representative through internal mail immediatley & automatically .
can any one guide me through the configuration setting required like message determination ,and credit representative & credit manager determination .
thanks
shashi

Hi Shashi,
Yes, you can.
In the standard system output type KRML is provided for this.
Use the menu path > IMG> Sales & distribution> Basic functions> Credit Management/Risk Management> Credit Management/risk management settings> Enter settings> double click on output types> select output type KRML.
Make the necessary settings here (like the partner functions- from left hand margin, default values etc.)
The partner function for credit manager is KM and credit rep is KB
Next, make sure the output type KRML is part of the output determination procedure (add this output type to the procedure, if not already there) that is assigned to your sales document type.
Provide your feedback after carrying out theses settings.
Regards,
PATHIK

Write-Behind Caching and Limited Internal Cache Size

Let's say I have a write-behind cache and configure its internal cache to be of a fixed limited size, e.g. 10000 units. What would happen if more than 10000 units are added to the write-behind cache within the write-delay period? Would my CacheStore's storeAll() get all of the added values or would some of the values be missed because of the internal cache size limitation?

Hi Denis,     >
     > If an entry is removed while it is still in the
     > write-behind queue, it will be removed from the queue
     > and CacheStore.store(oKey, oValue) will be invoked
     > immediately.
     >
     > Regards,
     > Dimitri
     Dimitri,
     Just to confirm, that I understand it right if there is a queued update to a key which is then remove()-ed from the cache, then the following happens:
     First CacheStore.store(key, queuedUpdateValue) is invoked.
     Afterwards CacheStore.erase(key) is invoked.
     Both synchronously to the remove() call.
     I expected only erase will be invoked.
     BR,
     Robert

Send an internal mail (SAP inbox) to a user and select the expire date

Hello!,
This is my first question in this forum. I need to send an internal mail to a user and I must insert a expire date.
I try to use the FM 'SO_OBJECT_SEND' and it's works but I don't know where I can insert the expirte date.
Can you help me?, please.
Thanks a lot.

Hi,
Try this..
In the parameter OBJECT_HD_CHANGE there is column DLDAT (Expiry date) & DLTIM (Expiry time)...Give the date and time in this column and then check..
THanks,
Naren

Cannot send internal mail after basic setup

I have setup Exchange 2013 SP1 on Server 2012R2 from scratch. I have added AD users and setup all the mailboxes for them.
However, when I try to send email from OWA to internal mail accounts, other users cannot receive and mail at all.
I have tried to send a email to my own account and I still cannot receive anything.
There is no other setting I have done at all.
Please let me know what information I need to provide to solve the issue.

Hi,
From your description, I recommend you follow the steps below for troubleshooting:
1. Enable "Basic Authentication" on the properties of Receive Connector.
2. Use the Test-ServiceHealth cmdlet to check if all the Windows services that Exchange server requires are running. Especially the Exchange Transport service and Mailbox transport service.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Can't send or receive internal mail Outlook 2013/Exchange 2013

Working on migrating from Exchange 2010 to 2013 . When I move a mailbox to the 2013 DB I lose the ability to send or receive internal mail. OWA works fine, but no internal. If I move it back to 2010, everything runs perfect. I have
been chasing my tail and seem to be missing something. Any suggestions?
:Updated:
Host record incorrect.

Hi Doc, First of all I would recomend you to take a look to this link:
http://technet.microsoft.com/en-US/exdeploy2013/Checklist?state=2419-W-AgAEAAAAQAAAAAEAAQAAAAA%7e
It's very helpfull for migrations, take the time to review it, also, in your particulary case, I'd recommend you to redirect all the messaging throught the new Exchange 2013 CAS server, so in that case all the mails from outbound just get authenticated and
then search for each mailbox.
Your issue cames out because your moving the user to an isolate envioroment, maybe the send connectors aren't configured, have you installed the Domain Certificate? or maybe have you exported?
Luis Antonio Navarrete Aranda Consultor Senior Akros Solutions Ecuador

Send mail from abap from internal mail id

Hiiii,
Is it possible to send mail from internal mail id by using abap program ?

Hi,
I did't get your question, do you want to send mail using ABAP coding. If thats what is your requirement
check out with link:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/multiple%252battachment%252bon%252be_mail
Tks,
Krishna..

Hi, I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mail are not receiving. Mail queue showing Connection refused error. Please help me

I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRI

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

Stop SpamAssassin from checking internal mail

I just found out that SpamAssassin is checking mail send between our own staff. These people are authenticated smtp and so I would perfer not to have SpamAssassin spend time reading internal mail from trusted cliets. Is there a way I can do that?
We use the apple WGM virtual domain model to host a couple of domains (just in case that has any impact on the problem)

You could use a different submission port for authenticated users only.
See Jeff's post for this:
http://discussions.apple.com/thread.jspa?messageID=1640069&#1640069

Internal mail size, External mail size

Similar Messages

Maybe you are looking for