Internal Memory Error During SQL Generation

Hi,
Please find below the details:
Issue: I am using BO XI R3 DeskI.
When I try to refresh/edit the Dataprovider of a report, it says "Internal Memory Error During SQL Generation"
I am sure that there is no case of Multiple contexts with this report and its a very simple one too.
I get this error in WebI as well
Workaround: Restarting the DesktopIntelligence Processing Server solves the issue for some time but then it reoccurs-for some other report -at a later time.
Could anyone please explain the root cause of this and is there a permanent solution to this problem.
Thanks
Prabhat Jha

Hi,
I investigated further and if the previous solution doesn't help you to resolve the issue please test the below mentioned solution.
When several contexts are possible for a query, the system tests if they produce the same set of tables. If they are identical, it is not necessary to prompt the user. It is the default behavior. But for some particular universes, the designer defines different contexts with the same tables, but with a different set of joins. This will compare the context with the joins. When this happens, InfoView fails with this error.
Resolution
1. Import the universe.
2. Modify the following parameter:
COMPARE_CONTEXTS_WITH_JOINS = No
3. Export the universe.
4. Open the Desktop Intelligence report in InfoView and refresh it.
It will refresh successfully
Regards,
Sarbhjeet Kaur

Similar Messages

Internal memory error during SQL generation. (QP0002)

Post Author: Rajesh Kumar
CA Forum: WebIntelligence Reporting
Hi,
I developed one Report in BO 5.1 version (Report size à 13 MB) and I Migrated this Report to BO XIR2,
After I Migrated this Report to BO XI R2 this Report was worked perfectly in DESKI & also in WEBI
But now for the past few Days (nearly 1 week) this Report is not working in WEBI, but itu2019s perfectly working in DESKI. In WEBI itu2019s showing error message à u201CInternal memory error during SQL generation. (QP0002)u201D
Iu2019m having one PDF documentation for BO Error Messages Listing, in that Documentation I have found the below à
Internal memory error during SQL generation. (QP0002)
Cause This error occurs when there is no longer enough memory to generate the SQL.
Action You should close other applications and then rerun the query.
I tried this alsou2026.
I closed all other applications and I Refreshed this Report, but again the same error is coming in WEBI
Report is working in DESKI but itu2019s not working in WEBI, I donu2019t know how to rectify this problem
Can anyone help me in this to rectify.. please
Thanks in advance
Rajesh Kumar

Hi,
I investigated further and if the previous solution doesn't help you to resolve the issue please test the below mentioned solution.
When several contexts are possible for a query, the system tests if they produce the same set of tables. If they are identical, it is not necessary to prompt the user. It is the default behavior. But for some particular universes, the designer defines different contexts with the same tables, but with a different set of joins. This will compare the context with the joins. When this happens, InfoView fails with this error.
Resolution
1. Import the universe.
2. Modify the following parameter:
COMPARE_CONTEXTS_WITH_JOINS = No
3. Export the universe.
4. Open the Desktop Intelligence report in InfoView and refresh it.
It will refresh successfully
Regards,
Sarbhjeet Kaur

Encountered IE500 Internal Server Error during rpt generation within a rpt

Hi,
I encountered an IE 500 Internal Server Error during the second report generation within a report. The report that was not generated came from another crystal report.
To clearly illustrate my problem, here is the scenario: Our application has a reporting module. From the reporting module, the graph reports(e.g bar graph) are generated. The generated graph report also includes the values which was represented in the graph. These values are clickable. When clicking these values, another report will be generated aside from the graph report. The second report will contain the details of the values in the graph report. The first report(graph report) was successfully generated however, the second report(detail report) was not. Instead, the IE 500 Internal Server Error was encountered.
This scenario works completely using the application with this setup:Crystal XI in Win XP having IIS 5.1 but when tried using the application in this setup: Crystal XI in Win 7 having IIS 7, the error mentioned above was encountered.
Additional Info: The second report was generated by using the HTML property of the formula field. A url was assigned to the formula field HTML attribute and included in the url is the session id and the report parameters.
Thanks

I guess to start with the obvious, IE 500 Internal Server Error resolves to Permission denied: 'GetObject'.
Before chasing that error, what version of CR and .NET are you using?
Once we determine that you are using a version of CR that is actually supported on the OS, we can move on to [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] to see if it tell us something - look for "Access Denied" messages.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

VLD-1141: Internal error during mapping generation.

I am getting the "VLD-1141: Internal error during mapping generation" error when deploying a mapping. This mapping was previously working fine. As part of a re-factoring effort, for all the underlying tables and views, we replace 2 existing columns with a new column. All the objects were successfully re-imported and synchronized in the mapping. The mapping is using Mapping Input Parameter, Lookups, Expression Transformations, Splitter, Set Operator, Source & Target Tables. All these transformation were part of the earlier working version of the mapping.
On doing validation within the mapping, I get a success message followed by 4 warning for the Lookup Condition on key Lookup does not contain a complete unique key. Before the re-factoring effort, I was getting the same 4 warning messages, however the mapping was executing correctly.
When I do Generate within the mapping, I get the following message:
Code cannot be generated.
Click the message tab for details.
In the Design Center, when I do a validation on the mapping I get the following error:
VLD-1141: Internal error during mapping generation.
java.lang.NullPointerException
at oracle.wh.service.impl.mapping.component.Sequence.getSequenceExpressions(Sequence.java:138)
at oracle.wh.service.impl.mapping.component.Sequence.doSequenceValidation(Sequence.java:239)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:123)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:97)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext(EntitySqlDelegate.java:78)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:240)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBasedInternal(PlSqlGenerationMediator.java:2108)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBased(PlSqlGenerationMediator.java:2090)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assemble(PlSqlGenerationMediator.java:541)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:798)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:335)
at oracle.wh.service.impl.mapping.generation.WBDeployableMappingGenerator.generate(WBDeployableMappingGenerator.java:102)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:433)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
Any help in this regards would be appreciated.
Naval

Hi,
I think your mapping is corrupted by converting two columns to one. The owb has always a problem if you change the structure of a table which is bound to a table operator. The way to avoid this is to drop the table operator after changing the table in the table editor and recreate it with the changed table definition.
Make a test: select the new attribut in the table operator and look left on the configuration window. To which table and attribute it's bound?
Regards,
Detlef

Error during context generation

Dear Friends,
In interactiveForm UI, when i put adobe form name in Templatesource and try to generate context automatically,
i get an error message ' Error during context generation ' and an empty context node is created.
i manually create attributes under that node and populate them in wddoinit method.
but i dont get those values on PDF output.
What may be the error ??
Kindly suggest.

Hi Otto,
I want to display data of an internal table in adobr form using web dynpro abap and adobe interactive form.
my web dynpro abap application is ready and adobe form is also ready.
when i integrate adobe interactive form on WDA and put form name in TEMPLATESOURCE and press enter
it throws an error message - 'Error in context generation' and an empty node is generated in WDA.
on running the application adobe form is displayed but no data is displayed.
what may be the error ?
i maintained attributes of node manually but then also no data is displayed.
that means data binding is not successful.
what may be the case ???
kindly suggest

Get '500 Internal Server Error' during SIP INVITE - cause 44

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Get ‘500 Internal Server Error’ during SIP INVITE - cause 44
Have you ever seen anything like this before? It usually works, but intermittently, we see calls get rejected. It somehow seems related to high loads on the router. We reduced the occurrences by changing our code to throttle the number of SIP INVITEs we send, but this doesn’t scale well. Once it occurs, the only way to clean it up is to do a shut/no shut on the voice-port associated to SIP INVITE.
Any suggestions on how we can proceed to debug this issue?
BACKGROUND:
Cisco 2811 running (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T3, RELEASE SOFTWARE (fc2)
NAME: "2811 chassis", DESCR: "2811 chassis" PID: CISCO2811
NAME: "9 Port FE Switch on Slot 0 SubSlot 1", DESCR: "9 Port FE Switch" PID: HWIC-D-9ESW
NAME: "WIC/VIC/HWIC 1 Power Daughter Card", DESCR: "9-Port HWIC-ESW Power Daughter Card" PID: ILPM-8
NAME: "Two port E1 voice interface daughtercard on Slot 0 SubSlot 2", DESCR: "Two port E1 voice interface daughtercard" PID: VWIC-2MFT-E1=
NAME: "Two port E1 voice interface daughtercard on Slot 0 SubSlot 3", DESCR: "Two port E1 voice interface daughtercard" PID: VWIC-2MFT-E1=
NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "High Density Voice2 Network module with on board two port interface on Slot 1", DESCR: "High Density Voice2 Network module with on board two port interface " PID: NM-HDV2-2T1/E1
NAME: "2nd generation two port EM voice interface daughtercard on Slot 1 SubSlot 0", DESCR: "2nd generation two port EM voice interface daughtercard" PID: VIC2-2E/M
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 2", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 3", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 5", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
WIRESHARK:
No.     Time        Source                Destination           Protocol Info
      2 0.057246    10.194.154.136        171.68.115.156        SIP      Status: 100 Trying
Frame 2 (471 bytes on wire, 471 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 100 Trying
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
        From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
        To: <sip:[email protected]:5060>
        Date: Wed, 08 Sep 2010 20:47:49 GMT
        Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Length: 0
No.     Time        Source                Destination           Protocol Info
      3 0.071428    10.194.154.136        171.68.115.156        SIP/SDP Status: 183 Session Progress, with session description
Frame 3 (1109 bytes on wire, 1109 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 183 Session Progress
   Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
        From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
        To: <sip:[email protected]:5060>;tag=48645D8-1175
        Date: Wed, 08 Sep 2010 20:47:49 GMT
        Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
                [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 8759 6996 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 8759
                Session Version: 6996
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 18710 RTP/AVP 18 101
                Media Type: audio
                Media Port: 18710
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
               MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
      4 0.089917    10.194.154.136        171.68.115.156        SIP/SDP Status: 200 OK, with session description
Frame 4 (1116 bytes on wire, 1116 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 200 OK
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
        From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
        To: <sip:[email protected]:5060>;tag=48645D8-1175
        Date: Wed, 08 Sep 2010 20:47:49 GMT
        Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
                [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: replaces
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 8759 6996 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 8759
                Session Version: 6996
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 18710 RTP/AVP 18 101
                Media Type: audio
                Media Port: 18710
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
              Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
                MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
     7 1.661867    10.194.154.136        171.68.115.156        SIP      Status: 100 Trying
Frame 7 (469 bytes on wire, 469 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 100 Trying
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
        From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
        To: <sip:[email protected]:5060>
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Length: 0
No.     Time        Source                Destination           Protocol Info
      8 1.676056    10.194.154.136        171.68.115.156        SIP/SDP Status: 183 Session Progress, with session description
Frame 8 (1107 bytes on wire, 1107 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 183 Session Progress
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
        From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
        To: <sip:[email protected]:5060>;tag=4864C1C-10F8
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
                [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 7991 6854 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 7991
                Session Version: 6854
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 17660 RTP/AVP 18 101
                Media Type: audio
                Media Port: 17660
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
                MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
     10 1.700567    10.194.154.136        171.68.115.156        SIP      Status: 100 Trying
Frame 10 (471 bytes on wire, 471 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 100 Trying
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100f04-2fde97a9
        From: <sip:[email protected]:5060>;tag=82f4d30-9c7344ab-13c4-45026-41c-5c20b753-41c
        To: <sip:[email protected]:5060>
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5320-9c7344ab-13c4-45026-41c-7fbe4865-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Length: 0
No.     Time        Source                Destination           Protocol Info
     11 1.726376    10.194.154.136        171.68.115.156        SIP/SDP Status: 200 OK, with session description
Frame 11 (1114 bytes on wire, 1114 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 200 OK
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
        From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
        To: <sip:[email protected]:5060>;tag=4864C1C-10F8
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
              [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: replaces
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 7991 6854 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 7991
                Session Version: 6854
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 17660 RTP/AVP 18 101
                Media Type: audio
                Media Port: 17660
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
                MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
     13 1.727645    10.194.154.136        171.68.115.156        SIP      Status: 500 Internal Server Error
Frame 13 (526 bytes on wire, 526 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 500 Internal Server Error
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100f04-2fde97a9
        From: <sip:[email protected]:5060>;tag=82f4d30-9c7344ab-13c4-45026-41c-5c20b753-41c
        To: <sip:[email protected]:5060>;tag=4864C50-3C3
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5320-9c7344ab-13c4-45026-41c-7fbe4865-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Reason: Q.850;cause=44
            Reason Protocols: Q.850
            Cause: 44(0x2c)[Requested circuit/channel not available]
        Content-Length: 0
Thanks!
-John

Since it appears you are a Cisco Employee, my recommendation is that you use the many internal resource available to you (including, but not limited to) , like TAC access, internal forums, team leaders, etc.
This not to give the casual reader, the impression that the best source of support at Cisco is a customer's public forum.

IDVD working till I installed 2TB ED. Keep getting message"There was an internal iDVD error during the last action. This is not a movie." Any help is appreciated.

iMovie message "There was an internal iDVD error during the last action. This is not a movie." comes up after trying to create a movie to burn to iDVD. Recently added a 2TB external drive to free up memory from HD. iDVD was working fine till the ED was added. Can't burn DVDs anymore. Any suggestions on how to fix the problem?

What folders did you move to the EHD? Any of the basic Home folders? What format is the EHD? It should be OS X Extended (journaled). Do you have any files that iDVD uses on the EHS, i.e. project files, media files?
OT

ERROR [B3108]: Unrecoverable out of memory error during a cluster operation

We are using Sun Java(tm) System Message Queue Version: 3.5 SP1 (Build 48-G). We are using two JMS servers as a cluster.
But we frequently getting the out of memory issue during the cluster operation.
Messages also got queued up in the Topics. Eventhough listeners have the capability to reconnect with the Server after the broker restarting, usually we are restarting consumer instances to get work this.
Here is detailed log :
Jan 5 13:45:40 polar1-18.eastern.com imqbrokerd_cns-jms-18[8980]: [ID 478930 daemon.error] ERROR [B3108]: Unrecoverable out of memory error during a cluster operation. Shutting down the broker.
Jan 5 13:45:57 polar1-18.eastern18.chntva1-dc1.cscehub.com imqbrokerd: [ID 702911 daemon.notice] Message Queue broker terminated abnormally -- restarting.
Expecting your attention on this.
Thanks

Hi,
If you do not use any special cmdline options, how do you configure your servers/
brokers to 1 Gb or 2 Gb JVM heap ?
Regarding your question on why the consumers appear to be connecting to just
one of the brokers -
How are the connection factories that the consumers use configured ?
Is the connection factory configured using the imqAddressList and
imqAddressListBehavior attributes ? Documentation for this is at:
http://docs.sun.com/source/819-2571/ref_adminobj_props.html#wp62463
imqAddressList should contain a list of brokers (i.e. 2 for you) in the cluster
e.g.
mq://server1:7676/jms,mq://server2:7676/jms
imqAddressListBehavior defines how the 2 brokers in the above list are picked.
The default is in the order of the list - so mq://server1:7676/jms will always be
picked by default. If you want random behavior (which will hopefully even out the
load), set imqAddressListBehavior to RANDOM.
regards,
-i
http://www.sun.com/software/products/message_queue/index.xml

500 Internal Server Error - java.sql.SQLException: Invalid column index

500 Internal Server Error
java.sql.SQLException: Invalid column index     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)     at oracle.jdbc.driver.OracleResultSetImpl.getObject(OracleResultSetImpl.java:851)     at com.stardeveloper.servlets.db.InsertServlet.doPost(InsertServlet.java:88)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)     at java.lang.Thread.run(Thread.java:534)
This is the connection part of the java code
     // connecting to database
          Connection con = null;
          Statement stmt = null;
          ResultSet rs = null;
          PreparedStatement ps = null;
          try {
               Class.forName("oracle.jdbc.driver.OracleDriver");
          con=DriverManager.getConnection("host:port:sid, userName, password");
               String sql;
          sql = "INSERT INTO USERSS(user_id, username) VALUES (?,?)";
               ps = con.prepareStatement(sql);
               stmt = con.createStatement();
               // inserting records
               if(proceed) {
                    ps.setString(1, user_id);
                    ps.setString(2, username);
                    ps.executeUpdate();
desc userss;
Name Null? Type
USER_ID NOT NULL NUMBER(5)
USERNAME VARCHAR2(15)
Index_Name table_name
USERSS_PK1 USERSS
when I try to insert values, it is inserting, but at the end I am getting the above error. I am using JDeveloper 10g and database [Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production]

I suggest you should alter the JDBC Driver and select one for Oracle 9i.
Which version is your JDev10g?

Error during SQL execution

Hi Experts,
We run a report which fails frequently with the below error. Could any one help me with the solution and reasons for this error.
Error during SQL execution: (DA0003): [Exception: DBD, ORA-01722: invalid number State: N/A] The following data providers have not been successfully refreshed: His. (DMA0007): []
Connection or SQL sentence error: (DA0005): [Exception: DBD, ORA-12535: TNS:operation timed out State: N/A] A connection required to refresh this document is unavailable. (DA0004): [] The following data providers have not been successfully refreshed: Reservations CW. (DMA0007): []
Many Thanks
Regards,
Syed

Hi,
The report is running for long time and it's getting failed. could you please let me know what could be the reason for this?
And could you please tell me the reason/Solution for the first error which i mentioned before.
Many Thanks
Regards,
Syed

Error during netlist generation and log audit trail error

I am not able to run the simulation application on my Multisim 10. The two following error were generated every time I try to run the simultion:
Error: log /Audit Trail, C: \document~1\xxx: Permission denied
Error during netlist generation, C:\document~1\xxx: Permision denied
Can any body help me fix this problem that make it impossible for me to use the Multisim10 simualtion tool?

There are two KBs I would like for you to see, since they might have the answer to the problem you are having:
1. This KB is related to having access to the TEMP directories where Multisim stores temp files for simulation:
http://digital.ni.com/public.nsf/allkb/15526EB2464F3EDD8625722C00696BB0
2. This other KB deals with non-Administrator users of Windows, it talks about v9 but the idea is the same for v10, just look for the v10 installation paths:
http://digital.ni.com/public.nsf/allkb/0DF597C217A235BE862571FB004F24BD
Nestor
National Instruments

EEW "Error during object generation"

Hi,
I am trying to enhance object BUPA (table BUT000) with a few fields using tansaction "EEWB". I am using a Netweaver 2004S system (without CRM, just a WAS 7.0 with a java and ABAP stack).
However, when I try to enhance BUPA I get the message "Error during object generation". When I check the function group that was created by EEW I see that the generated ABAP code is trying to copy my new BUT000 field. The problem seems to be that there is no new field created in BUT000. Please let me know if this is a bug or if I am doing something completely wrong.

Hello Frédéric,
The problem is solved. You put me on the right track.
Include CI_EEW_but000 contained two includes (that where generated by EEW) onr of them contained my custom field but the other had status 'new' and since it did not realy exist CI_EEW_but000 could not be generated.
As a solution I created the include (that had status new) with a dummie field and generated CI_EEW_but000. Then I set the enhancement category to char/numc and generated my EEW project again and it worked. Next I deleted the structure with the dummie field but then I could not generate BUT000 again (oops). To fix that I tried to generate my EEW project again and YES everything worked fine.

Error during object generation - EEWB - Urgent

Hi,
We are using standalone CRM 5.0
While trying to create custom fields via EEWB, we are getting the following error.
Task BUPA_CI_FILL_CRDCLNT200
No CRDCLNT200 transport request exists for System Workbench.
When I double click on the system message, I get the following detail:
"Error during object generation - Message no. OXT_MISC313"
Error during object generation
    Message no. OXT_MISC313
Diagnosis
    Errors occurred when generating objects of your extension.
Procedure
    You can analyze the errors as tasks in the error log of your extension
    (register Log in the extension detail screen) or as tasks marked with
    errors in the navigation tree.
Have anybody experienced this before? your inputs will be helpful.
Regards,
Anil

Hi Anil,
While you create EEWB extention, it will ask you for creation of transport request.
Most likely reason is your transport system is not configured.
Thus plz contact your basis admin to first configure transport landscape for your system and then try the same.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

OWB 11.2 internal error during mapping generation

Dear all,
Ever since switching to OWB 11.2 I have been sporadically receiving unexplicable errors during mapping deployment. It only happens when I generate more than 1 mapping simultaneously, and it appears to be completely random. One or more mappings will fail during the generation phase of the deployment with an 'internal error', after which I get the option to continue deployment of those mappings that did generate correctly. What I usually do next is trying to deploy the failed mappings again, which always works - the internal error does not reoccur. But it seems to be that this second generation does not work properly either.
For example, today I had to redeploy my entire set of mappings, due to a server change. Of the 60 mappings I had, about 5 failed with the forementioned error. (Sadly I can't include the exact error here since the job logs in the control center do not record this failure to generate, it looks like the failed mappings never were included in the job in the first place.) One of them I deployed aftewards, and found the query in the pacakge to look like:
    INSERT
    /*+ APPEND */
    INTO
      "SA_BETMD_01" "SA_BETMD_01"
      ("DEWNKNR",
      "DEBTMCE",
      "DEBTMOM",
      "DEBTMO2",
      "DEBTMO3")
      (SELECT
/*+ NO_MERGE */
/* DRBETMD_RS.INOUTGRP1 */
"DRBETMD_RS"."DEWNKNR" "DEWNKNR",
"DRBETMD_RS"."DEBTMCE" "DEBTMCE",
"DRBETMD_RS"."DEBTMOM" "DEBTMOM",
NVL("DRBETMD_RS"."DEBTMO2", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO2.OGRP.DEBTMO2: EXPRESSION */ "DEBTMO2",
NVL("DRBETMD_RS"."DEBTMO3", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO3.OGRP.DEBTMO3: EXPRESSION */ "DEBTMO3"
FROM
"SRC"."DRBETMD_RS"@"SRCDBP@SAFE_SRC_PRD_RET" "DRBETMD_RS"
    ;However, generating the preview code in OWB results in a more correct and complete version of the code:
    INSERT
    /*+ APPEND */
    INTO
      "SA_BETMD_01" "SA_BETMD_01"
      ("DEWNKNR",
      "DEBTMCE",
      "DEBTMOM",
      "DEBTMO2",
      "DEBTMO3",
      "DEBTMO4")
      (SELECT
/*+ NO_MERGE */
/* DRBETMD_RS.INOUTGRP1 */
"DRBETMD_RS"."DEWNKNR" "DEWNKNR",
"DRBETMD_RS"."DEBTMCE" "DEBTMCE",
"DRBETMD_RS"."DEBTMOM" "DEBTMOM",
NVL("DRBETMD_RS"."DEBTMO2", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO2.OGRP.DEBTMO2: EXPRESSION */ "DEBTMO2",
NVL("DRBETMD_RS"."DEBTMO3", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO3.OGRP.DEBTMO3: EXPRESSION */ "DEBTMO3",
NVL("DRBETMD_RS"."DEBTMO4", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO4.OGRP.DEBTMO4: EXPRESSION */ "DEBTMO4"
FROM
"SRC"."DRBETMD_RS"@"SRCDBP@SAFE_DGN_PRD_RET" "DRBETMD_RS"
    ;The same goes for other packages, all of which crash due trying to insert NULL values in a mandatory column! (In case, DEBTMO4.)
Funny enough, if I generate the mapping again a bit later - without making any changes to the mapping - the code is complete and everything works properly.
Does anyone else ever had this problem? My main problem is that I can't just reproduce this problem, so I can't exactly report it as a bug and expect it to be solved...
Kind regards,
Kurt Geens

Good morning Dave,
I do mean during deployment. As you probably know all too well, the deployment of a package is split in two parts: generation of the code, and the actual deployment. The internal error occurs during that first part - the generation of code. The exact steps I went through when the error occured are the following:
1) I selected about 15 mappings, and chose to 'replace' these mappings in the database. The code was generated, with 4 mappings having the forementioned 'internal error'. After pressing the play button the deployment of the 11 remaining packages continued without problem.
2) Within the same session, I selected the 4 failed mappings, and chose to 'replace' these again. The generation and deployment was succesful - no internal errors occured.
3) I exited OWB and started a daily workflow process. One of the mappings that had an internal error in step 1 crashed with a 'cannot insert null into' error.
4) I restarted OWB, opened the mapping, chose to generate the code, and compared the generation result with the package code in the database. This resulted in the difference mentioned in my original mail.
5) I deployed (replace) the mapping once more, and verified the code in the database. This time the code was complete (no missing column).
Regards,
Kurt

Report Server Internal Error During Report Generation

Hi,
We are running 9iAS on Sun Enterprise server. Though we have
successfully installed Form & Report Servers. The Form Server is
running perfectly but while reports are generated from Report
Server, it gives Internal Server Error (HTTP Error Code: 500) --
The server has encountered error or misconfiguration...
Checking the hard disk, we found that the report in PDF file has
been generated but it gives error being delivered.
We have no idea what had happened. Can someone kindly enlight me
some possibilities?

I guess to start with the obvious, IE 500 Internal Server Error resolves to Permission denied: 'GetObject'.
Before chasing that error, what version of CR and .NET are you using?
Once we determine that you are using a version of CR that is actually supported on the OS, we can move on to [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] to see if it tell us something - look for "Access Denied" messages.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Internal Memory Error During SQL Generation

Similar Messages

Maybe you are looking for