Internal table in smartforms without use predifined structure

Hi !!!
I have a doubt is possible to use an internal table that was defined in a program but not in a structure in the data dictionary ??
How i need define this in smartform ??
I'm doing the following:
   In the global definitions in the tab types i define a type.
   types: begin of ty_tab,
              data1 like ....
              data2 like ...
            end of ty_tab.
   types: ti_itab type standard table of ty_tab.
In the form interface in the tab import
I define the internal table ti_namex:
   parameter name: ti_namex type ti_itab.
When i try to activate the system send a message: Form interface, type ti_itab is unknown
   Somebody have any suggestions ??
Thanks for your support
        Noemí H.
Edited by: Noemi Reyna Huerta Araujo on Jun 28, 2011 8:25 PM

Hi Noemi,
As per Srilathau2019s answer, it cannot recognize the parameter, it showu2019s error.
But it is possible to pass the values from your driver program to the smart form through the internal tables defined in the driver program to the smart forms, without needing to create structure to the internal table in the data dictionary.
Follow the procedure given below.
In smart form to get the required data from driver program you need to declare the variable / field in form interface menu as import parameters with their associated types.
Run the smart form take functional module generated by smart form, then in driver program call function by using function module.
In that called function you get field which we declared in smart form.
Then pass final internal table field to fieldu2019s in exporting section of call function
Hope this will help you.
Regards,
Pravinkumar

Similar Messages

How to restrict height of table in smartform without using template

Hi Gurus,
I am facing a problem with table in smartform.I have 5 records in my table.If i print all 5 then table is fine.But if i get only one record in table then size of the table reduces to one row.Is there any way that i can keep my table height same as for 5 records,though i pass 1 record.I cannot use template here,because page-breaks are used in the form .
Your solutions are highly appreciated.
Thanks and regards,
Meenakshi

Hi,
As far my knowledge goes, If there is one record then table lines will take the height of only one row. You cannot Restrict it to take height of 5 rows.
A temporary solution could be to add empty records in your internal table so that the table uses all the 5 rows in the table while printing in the smartform. Since they are empty records your smartform will not display any data but will only use the height.
If you have 1 record add 4 empty records, Similarly if you have 2 records add 3 empty records...
This way all time the table will take the height of 5 rows.
As i said earlier this could be a temporary solution.
Thanks,
Hari Prasad.

Display 2 different structured internal tables in single screen using ALV

Hi,
I have two internal tables. Both has different structures. My requirement is to display both the internal tables in single screen using ALV Grid but NOT using OO ALV Grid display.
Is there any way of spliting the Final ALV display screen into two with two different headers and details as shown below.
Header1 for internal table 1
Data of internal table 1
Header1 for internal table 2
Data of internal table 2
Can anyone suggest a better way to display this.
Regards,
Senthil

hi
first think i can say ALV GRID means only for OO ALV it is not possible to display two I.T. data in singr report screen.
better to use of the fm: REUSE_ALV_BLOCK_LIST_DISPLAY
so that u can display both I.T. data in separate report list under single screen
Check the example programs:
BALVBT01 Testprogram ALV: Block list
BCALV_TEST_BLOCK_LIST Program BCALV_TEST_BLOCK_LIST
Regards,
deepak

Declaring an internal table in smartform

hi,
 can anyone tell how to declare internal table in smartform.
 the internal table contains fields from 2 or more data dictionary tables(eg.kna1
 and adrc). after this from the print program(internal table containing data in print
 program) internal table should be passed to the smartform.
thanks.

hi laxya,
if u want to pass the data from internal table in print program to Smartform.. there is only way.. that is using form interface..
1. goto se11, create a structure same as the itab in the print program.ex. z_itab
2. create line type... se11>select radio button-DATA type>z_it_itab >press create>then select>TABLE Type> then entrer some text--> in the line type Field in giveth Str name u have created in STEP 1. activate it.
3. got SMARTFORMS-> form inteface>tables tabe--> give some name ex IT_tab type z_it_itab.
then acivate it.. then in the driver progam pass this table data.
Exapmpel
CALL FUNCTION fp_v_fm_name
 EXPORTING
 archive_index = toa_dara
 archive_parameters = arc_params
 control_parameters = fp_st_control_parameters
 user_settings = space
 output_options = fp_st_output_options
 wa_vbdkr = fp_st_vbdkr
 IMPORTING
 job_output_info = l_it_ssfcrescl
 job_output_options = l_it_ssfcresop
 TABLES
 IT_tab = z_it_itab (or table in driver program)
EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Another way is cteate a type in Globaldifination-->types tab..
ex:
types: begin of ty_itab,
 matnr type matnr,
 meins type meins
 vrkme type vrkme,
end of ty_itab,
ty_it_itab type standard table of ty_itab.
then GLOBAL DIFINATION>GLOBAL DATA TAB>IT)ITAB TYPE TY_IT_ITAB.
BUT In this u can't pass the data from the print Program.. if u want to populate data in to this table... u have to write the Select query in the GLOBAL DIFINATIONS-->INITILIZATIONS TAB.
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K
Message was edited by:
 Naresh Reddy

How to Define Internal Table in Smartform

Hello,
I have some problem on define Internal Table in Smartform
I define a Temp_IT_Gen Type LBBIL_IT_GEN in Global Definiations
but i find that it is not available for me to append data into it,
the error message is Temp_IT_Gen is not a Internal Table - the Occurs n Specification is missing
so how can i solve it?
i want to use the internal table in the hold program.
Thanks a lot in advance.

Hi,
First U define the Table type in 'TYPES' tab of Global Definitions and then assing that table type to Internal table in 'Global Data' tab.
Eg:
define the Table Type like below in TYPES tab.
TYPES:BEGIN OF ty_TEMP.
        INCLUDE STRUCTURE XXXXXXX.
TYPES:END OF ty_TEMP.
TYPES: g_t_temp TYPE STANDARD TABLE OF ty_TEMP .
Now, define the Internal table in Global Data tab like below:
Variable Name    Type assignment    Associated Type
G_T_ITEM_1       TYPE                    G_T_TEMP
NOTE: whatever U define in Global Definitions can be used only in SMARTFORM, if u want to use it in Program U must define in Form Interface.
Hope it helps!!
Rgds,
Pavan

Issue in display format of internal table in smartform

I m printing an internal table in smartform.when a particular field exceeds the coloumn's length.the rest of the texts come down to the next line.It can be shown in the below example.i m printing "+ text to be printed" in that particular coloumn.
Because of the size of the coloumn in table ,"ed." comes down as shown.
+ text to be print
ed. 
its coming by default.
I want it like + text to be print
ed
I dont want ed to come directly down '+'.I want it to start from where 't' of 'text'
starts in the above line.
Notice that the requirement is to print "ed" after '2' spaces.And we can not use the string length concept bcoz not of characters after which the line comes down is not fixed.May be some change of setting in smartform will do the trick.
Please suggest what i need to do to get the desired result...
Regards
Rudra

Unfortunately there is no such way.

Passing internal tables into smartforms

Hi All,
I am testing a smartform for PO. But the smartform is already designed and it has two internal tables of type EKKO and EKPO. When i run the smartform its displaying the layout correctly but with no data ,which is true as the two internal tables have no data. So i want to fill those two internal tables based on the purchase order number/ numbers. So that i can test the smartform with those purchase order numbers.
I want to create a parameter / select option in smartform so that when we enter the PO number those internal tables will be filled. How to create those options in the smartform.
If i have to create through an ABAP program then i want to know how to pass those two internal tables to smartform. (Shall i have to call the FM couple of times and then pass those two internal tables).
Thanks in Advance

You fill the tables in the print program and pass the tables to the SmartForm function module under the tables section. See the FM call below (CALL FUNCTION lf_fm_name) and note that I am only passing in one internal table. If you wish you may pass in more than one table.
*& Form smartform_print
* text
* --> p1 text
* <-- p2 text
FORM smartform_print .
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: ls_control_param TYPE ssfctrlop.
DATA: ls_composer_param TYPE ssfcompop.
DATA: ls_recipient TYPE swotobjid.
DATA: ls_sender TYPE swotobjid.
DATA: lf_formname TYPE tdsfname.
DATA: ls_addr_key LIKE addr_key.
PERFORM set_print_param USING ls_addr_key
 CHANGING ls_control_param
 ls_composer_param
 ls_recipient
 ls_sender
 retcode.
*Get the Smart Form name.
IF NOT tnapr-sform IS INITIAL.
 lf_formname = tnapr-sform.
ELSE.
 MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF vbdkr-vkorg = '0035'.
 IF w_regio = 'QC'.
 tnapr-fonam = 'ZPCC_INVOICE_FR'.
 ENDIF.
ENDIF.
* IF NOT tnapr-sform IS INITIAL.
* lf_formname = tnapr-sform.
* ELSE.
* MESSAGE e001(/smb40/ssfcomposer).
* ENDIF.
* determine smartform function module for invoice
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING formname = lf_formname
* variant = ' '
* direct_call = ' '
 IMPORTING fm_name = lf_fm_name
 EXCEPTIONS no_form = 1
 no_function_module = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* error handling
 retcode = sy-subrc.
 IF sy-subrc = 1.
 MESSAGE e001(/smb40/ssfcomposer).
 ENDIF.
 IF sy-subrc = 2.
 MESSAGE e002(/smb40/ssfcomposer).
 ENDIF.
 PERFORM protocol_update.
ENDIF.
CALL FUNCTION lf_fm_name
 EXPORTING
 archive_index = toa_dara
* ARCHIVE_INDEX_TAB =
 archive_parameters = arc_params
 control_parameters = ls_control_param
* MAIL_APPL_OBJ =
 mail_recipient = ls_recipient
 mail_sender = ls_sender
 output_options = ls_composer_param
 user_settings = ' '
 vbdkr = vbdkr
 temp_jmval = temp_jmval
 temp_agval = temp_agval
 w_ship = w_ship
 w_ktgrd = w_ktgrd
 likp = likp
 w_trlrnbr = w_trlrnbr
 w_sealnbr = w_sealnbr
 w_booknbr = w_booknbr
 w_lc = w_lc
 w_shippoint = w_shippoint
 billto_fedid = billto_fedid
 soldto_fedid = soldto_fedid
 shipto_fedid = shipto_fedid
 vbco3 = vbco3
 w_z4_address = w_z4_address
 w_stawn = w_stawn
 w_herkl = w_herkl
 new_rate = new_rate
 vblkp = vblkp
 TABLES
 vbdpr = tvbdpr
* t_containers = t_containers
* tdomvd = tkomvd
* da_xfplt = da_xfplt
* payment_split = payment_split
* komk = komk
* frt_conditions = frt_conditions
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
 retcode = sy-subrc.
 PERFORM protocol_update.
* get SmartForm protocoll and store it in the NAST protocoll
 PERFORM add_smfrm_prot.
ENDIF.
ENDFORM. " smartform_print
Davis

Issue in display format of a internal table in SMARTFORM

I m printing an internal table in smartform.when a particular field exceeds the coloumn's length.the rest of the texts come down to the next line.It can be shown in the below example.i m printing "+ text to be printed" in that particular coloumn.
Because of the size of the coloumn in table ,"ed." comes down as shown.
+ text to be print
ed.
I dont want ed to come directly down '+'.I want it to start from where 't' of 'text'
starts in the above line.
Notice that the requirement is to print "ed" after '4' spaces.
Please suggest what i need to do to get the desired result...
Regards
Rudra

Unfortunately there is no such way.

How to Send Internal table to SAP Spool using Function Modules or Methods?

Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
Kiran

This is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
 W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
 P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
 MY_MONTH type T549Q-PABRP,
 STR_MY_MONTH(2) type C,
 MY_YEAR type T549Q-PABRJ,
 STR_MY_YEAR(4) type C,
 CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
 ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
 INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
 CMD like PC408-LTYPE value '/:', "command
 TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
 DOCDATA like SODOCCHGI1,
 OBJTXT like SOLISTI1 occurs 10 with header line,
 OBJPACK like SOPCKLSTI1 occurs 1 with header line,
 RECLIST like SOMLRECI1 occurs 1 with header line,
 OBJHEAD like SOLISTI1 occurs 1 with header line,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_buffer type string,
 l_no_of_bytes TYPE i,
 l_pdf_spoolid LIKE tsp01-rqident,
 l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
 spool_id type rspoid,
 line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
 ITAB-PERNR = P0001-PERNR.
 ITAB-ABKRS = P0001-ABKRS.
 ITAB-ENAME = P0001-ENAME.
 ITAB-USRID_LONG = P0105-USRID_LONG.
 append itab.
 clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
 clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
 refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
 select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
 and FPBEG ge W_BEGDA
 and FPEND le W_ENDDA
 and SRTZA eq 'A'.
* Produce payslip for those payroll results
 if SY-SUBRC = 0.
 call function 'GET_PAYSLIP'
 EXPORTING
 EMPLOYEE_NUMBER = ITAB-PERNR
 SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
 PAYSLIP_VARIANT = PAY_VAR
 IMPORTING
 RETURN = RETURN
 P_INFO = P_INFO
 TABLES
 P_FORM = P_FORM.
 check RETURN is initial.
* remove linetype from generated payslip
 loop at p_form.
 objbin = p_form-linda.
 append objbin.
 line_cnt = line_cnt + 1.
 endloop.
 file_length = line_cnt * 1022.
* create spool file of paylsip
 CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
 EXPORTING
 i_file_length = file_length
 IMPORTING
 e_spoolid = spool_id
 TABLES
 it_textdata = objbin.
 IF sy-subrc EQ 0.
 WRITE spool_id.
 ENDIF.
 DESCRIBE table objbin.
 DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
 CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 SRC_SPOOLID = spool_id
 NO_DIALOG = ' '
 DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
 TABLES
 PDF = pdf
 EXCEPTIONS
 ERR_NO_ABAP_SPOOLJOB = 1
 ERR_NO_SPOOLJOB = 2
 ERR_NO_PERMISSION = 3
 ERR_CONV_NOT_POSSIBLE = 4
 ERR_BAD_DESTDEVICE = 5
 USER_CANCELLED = 6
 ERR_SPOOLERROR = 7
 ERR_TEMSEERROR = 8
 ERR_BTCJOB_OPEN_FAILED = 9
 ERR_BTCJOB_SUBMIT_FAILED = 10
 ERR_BTCJOB_CLOSE_FAILED = 11
 OTHERS = 12
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = 'C:\itab_to_pdf.pdf'
 filetype = 'BIN'
 TABLES
 data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
 OBJHEAD = 'Objhead'.
 append OBJHEAD.
* preparing email subject
 concatenate W_ENDDA(6)
 ' Payslip-'
 ITAB-ENAME+0(28)
 ITAB-PERNR+4(4) ')'
 into DOCDATA-OBJ_DESCR.
 DOCDATA-OBJ_NAME = 'Pay Slip'.
 DOCDATA-OBJ_LANGU = SY-LANGU.
 OBJTXT = 'Pay Slip.'.
 append OBJTXT.
*prepare email lines
 OBJTXT = DOCDATA-OBJ_DESCR.
 append OBJTXT.
 OBJTXT = 'Please find enclosed your current payslip.'.
 append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
 read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
 clear OBJPACK-TRANSF_BIN.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = 3.
 OBJPACK-DOC_TYPE = 'RAW'.
 append OBJPACK.
* Create Message Attachment
 ATT_TYPE = 'PDF'.
 describe table OBJBIN lines TAB_LINES.
 read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
 OBJPACK-TRANSF_BIN = 'X'.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = TAB_LINES.
 OBJPACK-DOC_TYPE = ATT_TYPE.
 OBJPACK-OBJ_NAME = 'ATTACHMENT'.
 OBJPACK-OBJ_DESCR = 'Payslip'.
 append OBJPACK.
* Create receiver list refresh RECLIST.
 clear RECLIST.
 RECLIST-RECEIVER = itab-USRID_long.
 translate RECLIST-RECEIVER to lower case.
 RECLIST-REC_TYPE = 'U'.
 append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
 call function 'SO_DOCUMENT_SEND_API1'
 exporting
 DOCUMENT_DATA = DOCDATA
 PUT_IN_OUTBOX = 'X'
 COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
 tables
 PACKING_LIST = OBJPACK
 OBJECT_HEADER = OBJHEAD
 CONTENTS_BIN = pdf
 CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
 RECEIVERS = RECLIST
 exceptions
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 others = 8.
 if SY-SUBRC NE 0.
 ITAB-MTEXT = 'Message Not Sent to : '.
 else.
 ITAB-MTEXT = 'Message Sent to : '.
 endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
 else.
 "SY-SUBRC Not = 0
 ITAB-MTEXT = 'Payroll data not found : '.
 endif.
 "end of SY-SUBRC = 0.
 modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
 at new MTEXT.
 uline.
 write : / ITAB-MTEXT color 4 intensified on.
 write : / 'Emp. Code' color 2 intensified on,
 12 'Emp. Name' color 2 intensified on,
 54 'Email ID' color 2 intensified on.
 endat.
 write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

How to Import customized internal table to smartform from Print Program

Hi Gurus,
I want to Import customized internal table to smartform from print program, Can anybody tell me how it is possible.
With regards,
S.Saravanan

There is no problem passing an internal table to a smarforms, smartforms have the same interface as a function module ([Defining the Form Interface|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm] in [Smart Forms|http://help.sap.com/saphelp_nw70/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm]) so could you elaborate a little more on your requirement (is it a standard a custom forms, etc.)
Regards,
Raymond

Can we create graphic and text in the same window of smartform without using template?

we create graphic and text in the same window of smartform without using template?

Hi Kinjal,
as far as i understand you are talking about a template which you can partitioned and in one part you wants to show your graphics and in other part you wants to print your text, the border of template shall remain invisible.
If you wants to do it without using a template, you can do it as sujjested by Susmitha, but creating a template will provide you more flexibility that if you wants to change the attributes in future you can do it easily.

How can I use table headers only without using rows.

how can I use table headers only, without using rows and without leaving the space.
If anyone could say me how to paste the pic in this questions, I would have shown it.
The flow of view is in this way
{Table header(table on top of table)
column header1___|| column header2__ || column header3__ ||}
Here is the blank space I am getting, How to avoid this space?this space is of one table row height
{Contents column1 || Contents column2 || Contents column3 || (This is of other table below the uper table)}
I am using scroll for the content part of table only.
So I am using two tables.
I am using NW04.

I did the possibles you explained, but couldn't get rid off the space.
Any other solutions?
I am keeping the header static and the content columns scrollable.
I have used two tables one to display header above and the other to display only the contents.
I have put the contents table in scroll container.
And the header table in transperent container.
Thanks and Regards,
Hanif Kukkalli

How to call Subroutines,Standard Text & using Internal Table in SmartForm

Hi all,
need help in the following areas.Its very urgent!
1.How to CAll Subroutines in Smart Forms
2.How to CAll Standard Text in Smart Forms
Situation:
We have an Internal Table T_SALES with all the data which am going to display in the smartform,How to retrive data from an internal table in Smart forms
Any Help in this direction would be highly appreciated.
Regards
Ramu

Hi,
When you are using quantity or currency fields, you have to mentiong the reference fileds in a tab called CURRENCY/QUANTITY FILEDS in the GLOBAL DATA node.
Specifying a Currency or Quantity Reference
Use
In the ABAP Dictionary, you can assign a currency or quantity field to a table field. In the output of these fields, the system can then insert the relevant currency or unit:
·        If the value field is in the same table as the corresponding currency or quantity field, the system recognizes the reference automatically, and formats the value field according to the currency or unit in the assigned field.
·        If the value field is in a different table from the currency or quantity field, the system cannot recognize this reference automatically.
In the second case, you must indicate this reference to the system in the form, to ensure that the value field is formatted correctly.
Procedure
You want to assign a currency or quantity field in one table (for example, CURTAB) to a value field in another table (for example, VALTAB).
       1.      Create the reference to the currency field by entering the following values:
-         Field Name: VALTAB-VALUE, if this is the value field of VALTAB that you want to display.
-         Reference Field: CURTAB-CURRENCY, which is the currency field of CURTAB.
       2.      Under Data Type, specify whether the data type is a currency or quantity.
Result
In the output of the PDF-based print form, the system formats the value field VALTAB-VALUE according to the assigned value in the currency or quantity field of the global variable CURTAB-CURRENCY.
Thanks and Regards,
Bharat Kumar Reddy.V
Message was Added by: Bharat Reddy V
Message was Added by: Bharat Reddy V

Use internal table in Smartform

Hi All,
I want to use the internal table in program in smartform.
For that i have declare that table in TABLES attribute of the function module and trying to declare that table in form interface in smartform.I have created one stucture in data dictionary of same type for the associated type of that table.But it showing me error that only table types can be used as reference type for a table parameter.
Can anybody give me the solution or atleast tell me what is problem?
Thanks.

Hi,
First you define an internal table in your Driver program and populate the same with the data and put it in the Export parameters.
Then, in your Smartform, in the Form interface parameter's declarations, specify the name which you gave in the Driver program ( the Left hand side name in the interface list of the Function Module ) and specify it as type of the internal table you have used in the Driver program.
Please define in the same way as mentioned and let me know how it worked for you or still any issues on this.
Thanks,
Vishnu.

How to define internal table in smartform(urgent)

Hi all,
How can i define a internal table with header line in global data ???
i defined like
In Types,
TYPES : BEGIN OF T_XVBPLP2 ,
 VENUM(10),
 VEPOS(10),
 POSNR(6),
 VEMNG LIKE LIPS-LFIMG,
 MATNR LIKE LIPS-MATNR,
 CHARG LIKE LIPS-CHARG,
 ARKTX LIKE LIPS-ARKTX,
 END OF T_XVBPLP2.
TYPES: T_XVBPLP TYPE TABLE OF T_XVBPLP2.
In Global Data,
T_XVBPLP TYPE T_XVBPLP.
Still, i am getting error message that, Internal table is not with header line.
can u plz give me some examples , to define internal table with header line in smartform ???
any correct answers will be rewarded??
Regards
pabitra

Hi
define WA_ITAB in Global variables
variable name type assin associated type
t_text like zstc_text
you cannot define a internal table with header line in SMART Forms. Declare a internal table and a work area separately both referring to the same structure.
Then you can use the work area. So, in this case WA_ITAB is declared as a global variable of TYPE ZSTC_TEXT.
Regards
Pavan

Internal table in smartforms without use predifined structure

Similar Messages

Maybe you are looking for