Internal table name which hide statement uses

Hi,
To hide several variables, use chain HIDE statement.
As soon as the user selects a line for which you stored HIDE fields, the system fills the variables in the program with the values stored. A line can be selected.
¨ By an interactive event.
For each interactive event, the HIDE fields of the line on which the cursor is positioned during the event are filled with the stored values.
The HIDE area is a table, in which the system stores the names and values of all HIDE fields for each list and line number. As soon as they are needed, the system reads the values from the table.
I want to know how can we find the name of that internal table.
Regards,
maqsood

Hi,
i think it is system defined.
The HIDE Technique
You use the HIDE technique while creating a list level to store line-specific information for later use. To do so, use the HIDE statement as follows:
HIDE <f>.
This statement places the contents of the variable <f> for the current output line (system field SY-LINNO) into the HIDE area. The variable <f> must not necessarily appear on the current line.
To make your program more readable, always place the HIDE statement directly after the output statement for the variable <f> or after the last output statement for the current line.
As soon as the user selects a line for which you stored HIDE fields, the system fills the variables in the program with the values stored. A line can be selected
by an interactive event.
For each interactive event, the HIDE fields of the line on which the cursor is positioned during the event are filled with the stored values.
by the READ LINE statement.
<b>You can think of the HIDE area as a table, in which the system stores the names and values of all HIDE fields for each list and line number. As soon as they are needed, the system reads the values from the table.</b>
Thanks&Regards,
Ruthra.R

Similar Messages

How to use bind variable value for table name in select statement.

Hi everyone,
I am having tough time to use value of bind variable for table name in select statement. I tried &p37_table_name. ,
:p37_table_name or v('p37_table_name) but none worked.
Following is the sql for interactive report:
select * from v('p37_table_name') where key_loc = :P37_KEY_LOC and
to_char(inspection_dte,'mm/dd/yyyy') = :P37_INSP_DT AND :p37_column_name is not null ;
I am setting value of p37_table_name in previous page which is atm_state_day_insp.
Following is error msg:
"Query cannot be parsed, please check the syntax of your query. (ORA-00933: SQL command not properly ended) "
Any help would be higly appreciated.
Raj

Interestingly enough I always had the same impression that you had to use a function to do this but found out from someone else that all you need to do is change the radio button from Use Query-Specific Column Names and Validate Query to Use Generic Column Names (parse query at runtime only). Apex will substitute your bind variable for you at run-time (something you can't normally do in pl/sql without using dynamic sql)

Using Table name in Read statement dynamically

Hi Experts,
I have the following requirement.
Based on a country code say "A" , "B", "C" and based on this i have to read different internal tables lt_tabA, lt_tabB and lt_tabC.
The table key can be given dynamically, but how can i use the internal table name dynamically without using if statements.
Please help.
Thanks!
Best Regards,
Gayathri

Hi Gayathri,
something like
DATA:
    lt_t100 TYPE TABLE OF t100,
    lt_t000 TYPE TABLE OF t000.
FIELD-SYMBOLS:
    <table> TYPE table,
    <rec>   TYPE ANY,
    <field> TYPE ANY.
SELECT:
    * INTO CORRESPONDING FIELDS OF TABLE lt_t100 FROM t100 UP TO 10 ROWS,
    * INTO CORRESPONDING FIELDS OF TABLE lt_t000 FROM t000 UP TO 10 ROWS.
CASE abap_true.
    WHEN space.
      ASSIGN lt_t100 TO <table>.
    WHEN OTHERS.
      ASSIGN lt_t000 TO <table>.
ENDCASE.
READ TABLE <table> with key ('MANDT') = sy-mandt ASSIGNING <rec>.
Regards,
Clemens

Table name which contains the email addresses maintained in address area of SCOT

HI,
I would like to know the table name which contains the email addresses maintained in address area of SCOT.
I know how to see through SCOT, but I want to see as a list through SAP table.
I am not able to see email list through SXNODE AND SXADDRTYPE tables.
Thanks,
Nagaraju Ravuri

Hi Nagaraju,
You may use ADR6 table and field SMTP to get email address of respective users.
Regards,
Deepak Kori

How to compare 2 different database to get table name which are not present in second database

How to compare 2 different database to get table name which are not present in second database

Sorry cannot test it right now
use db1
go
select * from sys.tables t where not exists
(select * from db2.sys.tables s where t.object_id=s.object_id)
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Table Names which stores GRN and GRIR Details of a PO

Hi Friends,
I want table names which stores GRN and GRIR details of a PO.
Thanks in advance
Expecting ur answers,
Cheers;-)
R.Kripa.

Hi,
From MKPF get the gr for PO.
if you see VGART = 'WE' and BLART = 'WE' then you get all MBLNR s GR related PO's. and using those go to MSEG table and get MSEG-EBELN and MSEG-EBELP
this is the flow...
MKPF to it_mkpf where VGART = 'WE' and BLART = 'WE'.
from
MSEG get EBELN,EBELP for all entries of MKPF and get PO's corresponding GR's
i hope it is clear...
Regards
vijay

How to find table name which provide data for the DataSource

Hi friends,
How to find the Table name which providing data for the Business content DataSources (Master Data). Is there any table or Transation which give datasource and Table name at once.
Thanks&Regards
Revathi

Hi Revathi...........
1)If the datasource is extracting data from any table.................open the datasource using RSO2..........there u will get the table name......
2) If the datasource is extracting data from any view.............go to RSA2..........copy the view name..........go to SE11 >> give the view name >> and check..........
3) If Datasource is Function module based............then u hav to check in RSA2 >> give the datasource name >> execute >> there u will find the Extract structure name......Copy the Extract Structure name >> Go to SE11 >> in the Data Element field give the Extract structure name >> Display >> From the Entry Help/Check tab u can get the Table name............
If u double click on the Extractor..............u will get the Function Module..............from there also u can check that the FM extracting data from which tables............
For Other datasources also...........u can get the structure name from here........
4) If the Datasources r LO datasources............then u can get the table name in LBWE.............LO extractor - goto transaction LBWE.................... Select the maintenance link for your datasource............
here in the right hand pane.........in the drop down box, you can see the structures associated with this extractor ........ just remove the MC for the structure names to get the base table names. e.g. EKKO for MCEKKO.
5) There is a pattern for the Extract structure name for LO datasources.............for an example..........
DataSource 2LIS_11_VAITM ......Extract structure name is MC11VA0ITM
2LIS_11_VAHDR >> MC11VA0HDR
Hope this helps.........
Regards,
Debjani.......

Whats the table name which connects BP and customer group code?

Hi,
Please let me know the table name which connects BP and its customer group code, i tried CRMM_BUT_SET0010 but i am not sure how to get "GUID for sets of business part"
regards
Vinay

Hi Vinay
Try instead table vision CRMV_BUT_SET0010. There you can use as search criteria the business partner number.
However, if you want to understand the partner relation with guid_set value, just study how this table vision join is built.
Kind regards,
Garcia

How to change co-ordinates of an internal table in page 1 & 2 using offline adobe forms?

Hello All,
How to change co-ordinates of an internal table(main window data) from page 2 onwards in offline adobe forms. For e.g., I need to print my internal table around 3-4 lines along with header&footer(only 1st page)in page 1. From 2nd page onwards Internal table should print header and use remaining page til end.
Thanks in advance for your help.
Thank you,
Janakiram.

Issue resolved...need to use content area option to achieve the same.
Thanks,
Janakiram.

Table name which can show a list of customersfor an output type

Hi All,
Can you please tell me the table name which can show me the list of customers if a particular output type is mentioned in the selection screen.
Thank you,
Regards,
Shanu.

Hi,
Table B001.
Goto SE16 enter B001
Application : V1 - sales, V3 - Billing
enter output type - BA00 or RD00 and press F8.
Regards,
Chandrasekhar.S
Edited by: chandra sekhar S on Aug 12, 2008 12:28 PM
Edited by: chandra sekhar S on Aug 12, 2008 12:36 PM

Table name which stoers Opening Stock posting of Inventory

Hi all,
I wanted to know what is the table name which stores the Opening Stock of Inventory. and also How can i know the price that i had given while posting the Opening Balance for a particular Item.
Expecting you early response.
Thank you
regards,
Shreyas

Hi Shreyas,
You can query the table OINM with transtype of '-2' which stand for "Opening Balance" for inventory items.
The query looks like:
Select * from oinm t0 where t0.TransType = '-2' and t0.ItemCode = '[%0]'
Any items' opening transaction can be found there.
Thanks,
Gordon

How to find Tables names which are updated or inserted data

Hi,
I need some help to know.
I am submitting a form in Oracle OWS (Oracle Workforce Scheduling), but don’t know where exactly data is going in the tables or how many tables are going to updated.
I want to know the table names which are update after the submitting the form.
Thanks in advance....
Regards,
Saket

I don't think so. Never heard of Oracle Workforce Scheduling. Is there a forum for that?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Need the the underlying table names which the Material Plan Detail Search p

Our supply planning users would like to obtain the demand and supply plan for a bunch of given parts by running a query against some tables. The data they need via a PS Query output in Excel format is the same data that is provided by the Material Plan Detail page in PeopleSoft Supply Planning (Menu Path: Supply Planning >>>Solve Plan>>>> Material >>>>>>Material Plan Detail). The main underlying table behind this page is PS_PL_MRP_DTL.
The problem is that this table contains data for only one Part Number (INV_ITEM_ID). The data is populated when Item ID is selected on the Material Plan Detail Search page.
What are the underlying table names which the Material Plan Detail Search page brings together to present the information for the selected part number on the target page (The Material Plan Detail page)?
If you could tell us the underlying table names (which the Material Plan Detail Search page brings together) we can write a query to present the data to the users for multiple part numbers at a time and not just one part number at a time.
Any help would be greatly appreciated.
We are on FSCM 8.9 Bundle 13
Thanks in advance.

The ERD's for FSCM 8.9 are available from following link
PeopleSoft Enterprise Financial Management 8.9 Entity Relationship Diagrams [ID 979359.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=979359.1
Hope it contains the info you are looking for.
Hakan

Use table name in UPDATE statement as variable

Hi All,
I am using ORACLE 9i AIX base. I want to write following procedure:
PROCEDURE update_header (
p_care_msg_nbr IN NUMBER,
p_care_msg_id IN NUMBER,
p_care_msg_gkey IN NUMBER,
p_old_status IN VARCHAR2,
p_new_status IN VARCHAR2
IS
l_table varchar2(50);
BEGIN
l_table := 'CARE_EDI_MESSAGES';
UPDATE '&l_table'
SET status = p_new_status,
changed = sysdate,
changer = user
WHERE care_msg_no = p_care_msg_nbr
AND care_msg_id = p_care_msg_id
AND gkey = p_care_msg_gkey
AND status = p_old_status;
END;
I want to give the table name by passing value in a variable or parameter. Is it the write way or can I do this function in any other way.
Pleae tell me in urgency.
Thanks & Regards
Hassan Raza

This implies that you have several tables with identical or near identical structures, otherwise you will get errors if any of the mentioned columns do not exist in the table passed but ...
You cannot use a substitution variable that way. Oracle will ask for a value when you try to create the procedure, and compile what ever value you supply into the procedure viz.
SQL> CREATE PROCEDURE p AS
2 l_id NUMBER;
3 BEGIN
4     SELECT id INTO l_id FROM &t;
5 END;
6 /
Enter value for t: T
old   4:    SELECT id INTO l_id FROM &t;
new   4:    SELECT id INTO l_id FROM T;
Procedure created.
SQL> SELECT text FROM user_source WHERE name = 'P'
2 ORDER BY line;
TEXT
PROCEDURE p AS
l_id NUMBER;
BEGIN
   SELECT id INTO l_id FROM T;
END;Even if that is the effect you want, note that there are no quotes around the substitution variable in the CREATE statement.
If you want to be able to pass the name of the table to the procedure, then you need to make the table name a parameter, then build the sql statement and execute it using EXECUTE IMMEDIATE. Something more like:
PROCEDURE update_header (p_care_msg_nbr IN NUMBER,
                         p_care_msg_id   IN NUMBER,
                         p_care_msg_gkey IN NUMBER,
                         p_old_status    IN VARCHAR2,
                         p_new_status    IN VARCHAR2,
                         p_table         IN VARCHAR2) IS
l_sqlstr VARCHAR2(4000);
BEGIN
   l_sqlstr := 'UPDATE '||p_table||' SET status = :b1 '||
               'changed = sysdate, changer = user '||
               'WHERE care_msg_no = :b1 and care_msg_id = :b3 and '||
               'gkey = :b4 and status = :b5';
   EXECUTE IMMEDIATE l_sqlstr
      USING p_new_status, p_care_msg_nbr, p_care_msg_id, p_care_msg_gkey, p_old_status;
END;HTH
John

Dynamic internal table and dynamic read statements.

Hi,
My Scenario :
I have two dynamic internal tables.
I am looping at one internal table and trying to read another table.
In the read statement how do I mention the key dyamically.
Example code below :
LOOP AT <dyn_table> ASSIGNING <dyn_wa>.
read second dynamic internal table.
enloop.
The key which I want use for reading say it is keyed in the selection criteria....
Also based on the value I read I want to modify the first internal table field value.
Remember I dont want to explicity mention the key
How do I do that?
Thanks
Krishna.

Hi
U need to use the field-symbol, but u can't use a WHERE option, but u need to use the CHECK statament into the second loop:
LOOP AT <dyn_table> ASSIGNING <dyn_wa>.
    LOOP AT <DYN_TABLE2> ASSIGNING <DYN_WA2>.
        ASSIGN COMPONENT <COMPONENT> OF STRUCTURE   <DYN_WA2> TO <FS>.
        CHECK <FS> IN (=) .......
            ASSIGN COMPONENT <COMPONENT> OF STRUCTURE   <DYN_WA> TO <FS2>.
            <FS2> = .......
            EXIT.
    ENDLOOP.
ENDLOOP.
Max

Internal table name which hide statement uses

Similar Messages

Maybe you are looking for