Internal table values to select-options

Hi,
I have to modify an existing program.
here
1. I am populating one field in the selection-screen with a file path which contain some data.
2. then this file i am converting into an internal table.(At selection-screen event)
Now, i have to pass this data of the internal table to a select-option in the selection-screen back.
how it is possible, i have tried a lot.
please help me.
Regards,
Maahi.

tables bkpf.
data: begin of itab occurs 0.
INCLUDE STRUCTURE alsmex_tabline.
data end of itab.
PARAMETERS p_fpath like rlgrap-filename.
SELECT-OPTIONS rbelnr FOR bkpf-belnr.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fpath.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
* PROGRAM_NAME = SYST-REPID
* DYNPRO_NUMBER = SYST-DYNNR
* FIELD_NAME = ' '
 STATIC = 'X'
* MASK = ' '
CHANGING
 FILE_NAME = p_fpath
* EXCEPTIONS
* MASK_TOO_LONG = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
 FILENAME = p_fpath
 I_BEGIN_COL = 1
 I_BEGIN_ROW = 1
 I_END_COL = 1
 I_END_ROW = 2000
TABLES
 INTERN = itab
* EXCEPTIONS
* INCONSISTENT_PARAMETERS = 1
* UPLOAD_OLE = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
sort itab by value.
delete adjacent duplicates from itab comparing value.
now after this i have to implement the logic in 3rd point.
thanks ,
Maahi

Similar Messages

How to avoid the truncation of field values in select-options

Hi all,
I have a requirement where i have used select-options to select multiple filenames. I have taken the filename of type rlgrap-filename(128 char) But the problem is in select-options if the values of the filename which is selected has length ( i.e the length of the selected field value) exceeds 45 character , then he remaining charactes are truncated. Hence i am not able to get the
correct field value in the internal table of the select-options.
i came to know that if NO_DISPLAY addition is used then this truncation wont occur. But in my case user has to select the files and hence this addition cannot be used.
please let me know if anyone has a solution for this or if there is any other way to select multiple entries in selection screen.
Regards
Manipal parkala

rlgrap-filename is having the length of only 128 characters.If the file path exceeds 128 characters then the rest will get truncated.If you file name exceeds more than 128 characters and the pafth is fixed,then harcode the entire path in the program and later on concatenate the path and the file name into a string which can be used for further processing.
paramters:p_file like rlgrap-filename.
here just give the filename as say 1234.XLS.(Assuming that you are not browsing for the file using F4_filename).
In the program harcode the path say C:\Documents and setting\sapworkdir\user\.
Now concaternate these two and pass it to string which can be used for further processing.
If the user intneds to browse the file and the path name exceeds 128 characters then follow the way to delcare the paramter in the selection screen as said above.If it is working for parameters then I think it should be working for select option also.

How to bind internal table values with RootUIElement(Table) from select Que

Hello Friends,
 In my view Layout,there r two Input fields ,Submit button and Table... My concept is when user posting values in two input fields and clicking submit button means the result(more than one values) should be displayed in Table...
 I written coding also but i dont know to bind internal table values with Table... My code as follows,
method onactionsearch .
 data:
 Node_Node_Flight type ref to If_Wd_Context_Node,
 Elem_Node_Flight type ref to If_Wd_Context_Element,
 Stru_Node_Flight type If_View1=>Element_Node_Flight ,
 itab TYPE STANDARD TABLE OF sflight.
navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
 Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
@TODO handle not set lead selection
 if ( Node_Node_Flight is initial ).
 endif.
get element via lead selection
 Elem_Node_Flight = Node_Node_Flight->get_Element( ).
@TODO handle not set lead selection
 if ( Elem_Node_Flight is initial ).
 endif.
alternative access via index
Elem_Node_Flight = Node_Node_Flight->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Node_Flight is initial ).
endif.
get all declared attributes
 Elem_Node_Flight->get_Static_Attributes(
 importing
 Static_Attributes = Stru_Node_Flight ).
select * from sflight into CORRESPONDING FIELDS OF TABLE itab
WHERE carrid = Stru_Node_Flight-carrid and connid = Stru_Node_Flight-connid.
Node_Node_Flight->bind_table( new_items = itab ).
endmethod.
Plz reply me asap...!

Hi,
What I understood from your coding is...
* navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
You are reading values from the above node and binding the values to the same node.Am i right?
Did you take seperate context node for your input fields or binded the above context to the fields.If not then read the context attribute values which are binded to the carrid and connid then pass these values to select query.
One more thing is select cardinality 1..n for node NODE_FLIGHT since you are displaying more than one record.
Go through the some basic tutorials.Search in sdn you will it get.Already there is a tutorial in sdn which explains exactly what do you require.
Go throgh this link
Web Dynpro for ABAP: Tutorials for Beginners
Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
Edited by: suman kumar chinnam on Mar 26, 2009 10:50 AM

How to Captured Value into Select-Options Range Table Without "Enter"

Hi,
I defined a set of Select-Options in the Web Dynpro. I found that the value for the Select-Options will not be captured whenever I manually type in the value instead of choosing it from F4 Help Drop Down.
However, this problem can be resolved if I manually type in the value for Select-Options in the Selection Field and I press "Enter". Without pressing "Enter" value will not be captured.
Any solution for this issue? Please help.

Hi Kris,
My problem is only when the user key in the value themselves rather than choosing it from Select-Options drop down value. Most of the time user will know what value to key in and will skip the step to choose from the Drop Down List. Thus, if this happen, the value keyed in by the user will not be able to capture into the range table.
I am using this logic to capture the value for selection item:
wd_this->m_helper->get_selection_screen_items(
 IMPORTING et_selection_screen_items = lt_sel_item ).
* Values From Selection Screen
LOOP AT lt_sel_item ASSIGNING <fs_sel_item>.
 CASE <fs_sel_item>-m_id.
 WHEN `PERNR`.
 ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_pernr>.
 WHEN `BUKRS`.
 ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_bukrs>.
 WHEN `STAT2`.
 ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_stat2>.
 WHEN `WERKS`.
 ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_werks>.
 WHEN `BTRTL`.
 ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_btrtl>.
 WHEN `PERSG`.
 ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_persg>.
 WHEN `PERSK`.
 ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_persk>.
 WHEN `ABKRS`.
 ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_abkrs>.
 WHEN `BEGDA`.
 ASSIGN <fs_sel_item>-m_value->* TO <fs_begda>.
 ENDCASE.
ENDLOOP.
E.g. User key in the BUKRS without using the Drop Down Value provided by the Select-Options. For this case, <fs_bukrs> table will be initial as no value is captured.
Edited by: Girish Nabar on Apr 21, 2011 8:55 AM

Getting values from select option

Hi,
I have a requirement where the user is going to pass values in select-option in low and high. lets say s_bwart(movement types).
now i have to fetch this bwart values into an internal table.
my internal table will be having only one field that is bwart. so how do i populate my internal table with those values. could any body help me in this.
Thanks in advance
neha

Hi, when using SELECT-OPTIONS, use can pretty much do any kind of selection he wants, including ranges, and excluding values, so the best way to handle it is to select from the data base when the user executes the report. for example.
data: begin of ibwart occurs 0,
 bwart type mseg-bwart,
 end of ibwart.
select-options: s_Bwart for mseg-bwart.
start-of-selection.
select bwart into table ibwart
 from T156
 where bwart in s_bwart.
Regards,
Rich Heilman

Table View MULTI SELECT option and Event handling problems

Hello All,
I am facing problem while giving miltselect option in a table view. When i mention multiselect attribute in Select option in table view, i am unable to select all the rows which i want to select,because i have an event onRowSelection event activated so when i select a row then it will automatically go to the event and i am unable to do multiple select.
Can you guys pl tell me is there any way thtat i can put check boxes in a table column and by that i can get values of row seelct and can perform my subsequent SQL operation.
Also i am not able to navigate in table view through BYPAGE or BYLINE option. When I click on navigate button then page got refreshed and i lost data.
One more query guys , can you pl tell me how can i store my internal table values from one event for the another event. I have used EXport/Import but internal table values get refreshed as page got refreshed on event switching/selection.
Please respond.

hye rahul.
as i told you my second solution, will help you . the values remain in the corresponding UI elements.
For example , you have a drop down and table view. both will trigger events. bind the data of the table at drop down event and bind the dat of the drop down at table event.
event = cl_htmlb_manager=>get_event( runtime->server->request ).
CASE event->id.
when 'dd1'.                   drop down event is fired.
bind data for drop down
dd ?= cl_htmlb_manager=>get_data(
                                      request = runtime->server->request
                                      name    = 'dropdown'
                                      id      = dd_id'           " name of the drop down id
along with drop down bind data for table view
    tbv ?= cl_htmlb_manager=>get_data(
                                      request = runtime->server->request
                                      name    = 'tableView'
                                      id      = 'tbv_id'           " name of the table view
when 'tbv_id'.                   drop down event is fired.
bind data for drop down
dd ?= cl_htmlb_manager=>get_data(
                                      request = runtime->server->request
                                      name    = 'dropdown'
                                      id      = dd_id'           " name of the drop down id
along with drop down bind data for table view
    tbv ?= cl_htmlb_manager=>get_data(
                                      request = runtime->server->request
                                      name    = 'tableView'
                                      id      = 'tbv_id'           " name of the table view
This is how data should be binded in case of Stateless application. All the UI elemets must b binded again.. as the global data is refresed again.
Hope this helps.
Regards,
Imran.

Set of default values for Select-Options

Hi Gurus,
I have a requirement where I need to set default values for select options
ex: SELECT-OPTIONS: S_MTART FOR MARA-MTART
default values must be ERSA - HIBE- FHMI - DIEN - GEST
Please tell me how to do it.
Effective replies will be rewarded with full points
Karthik

Hi,
For each SELECT-OPTION, you can only specify one DEFAULT.
You must specify the default value g in its internal format, e.g. "SELECT-OPTIONS DATE FOR SY-DATUM DEFAULT '19931224'", not "... DEFAULT '24.12.1993'".
The default value g should normally be a literal because, at runtime when you use SUBMIT, it is transferred to the selection options table sel so early that no value can be assigned to the field g. System fields like SY-DATUM are an exception here because the system usually assigns values to them as soon as the report processing starts.
When you use user-defined selection screens in your programs that you do not call using SUBMIT, the DEFAULT value is transfered when the selection screen is first called. In this case, therefore, you can use other fields g.
regards,
sowjanya
Message was edited by: sowjanya suggula

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

How to display data from internal table in the SELECTION-SCREEN

Hello Experts,
My requirement is to display the data's from an internal table in the selection screen. I tried using selection-screen comment. But it is working only for a single record. Can anyone please tell me how to do this?

Hi Ritika,
we cant use write statement inside selection-screen.
see my coding.
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
 NO INTERVALS.
 SELECT-OPTIONS SEL1 FOR SY-DATUM.
 PARAMETERS PAR1(10).
** I WANT ALL RECORDS FROM AN INTERNAL TABLE HERE ONLY
 SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN PUSHBUTTON 2(10) but1 USER-COMMAND cli1.
SELECTION-SCREEN PUSHBUTTON 20(10) but2 USER-COMMAND cli2.
SELECTION-SCREEN END OF SCREEN 123.

Submititng the program to another program using internal table values

Hi All,
How to Submit from one program to another program using internal table values minimum 7 int tables without using the seletion screen
thanks
raj

Hi All,
Thank you very much for your inputs.
i am facing another issue:
For each 10,000 records it should trigger a job (we are trying to call a program) were the validation will be done only through the other program.
please find the code mentioned below :
TABLES : but000.
DATA: int_bp LIKE but000 OCCURS 0 WITH HEADER LINE.
data released like BTCH0000-CHAR1.
DATA: jobnumber LIKE tbtcjob-jobcount, " Job ID and
      jobname LIKE tbtcjob-jobname, " job name.
      startdate LIKE tbtcjob-sdlstrtdt, " Start-time
      starttime LIKE tbtcjob-sdlstrttm, " window specs.
      laststartdate LIKE tbtcjob-laststrtdt,
      laststarttime LIKE tbtcjob-laststrttm,
      job_released LIKE btch0000-char1. " JOB_CLOSE: Was job released?
DATA : l1 TYPE i,
       b_size TYPE i,
       b_cursor TYPE cursor.
INITIALIZATION.
b_size = 5000.
START-OF-SELECTION.
OPEN CURSOR WITH HOLD b_cursor
     FOR
     SELECT *
     FROM but000
     WHERE bpkind = 'AA'.
IF sy-subrc = 0.
    DO.
      FETCH NEXT CURSOR b_cursor INTO TABLE int_bp
                                           PACKAGE SIZE b_size.
Note : here in this point we are getting a dump for the second job trigger.
      IF sy-subrc = 0.
        CLEAR jobname.
        CONCATENATE sy-repid sy-datum sy-uzeit INTO jobname.
export int_bp to memory id 'ABC'.
        CALL FUNCTION 'JOB_OPEN'
             EXPORTING
                  jobname          = jobname
             IMPORTING
                  jobcount         = jobnumber.
            EXCEPTIONS
                 cant_create_job = 1
                 invalid_job_data = 2
                 jobname_missing = 3
                 OTHERS           = 4
CALL FUNCTION 'JOB_SUBMIT'
      EXPORTING
           authcknam = sy-uname
           jobname   = jobname
           jobcount = jobnumber
           report    = 'YTEST_RRR'.
           variant   = lv_variant.
   SUBMIT ytest_rrr
      VIA JOB jobname NUMBER jobnumber
      AND RETURN.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
       event_periodic                    = 'X'
        jobcount                          = jobnumber
        jobname                           = jobname
        strtimmed                         = 'X'
      IMPORTING
        job_was_released                  = released
        else.
        EXIT.
      ENDIF.
    ENDDO.
calling program :
REPORT YTEST_RRR .
data itab1 like but000 occurs 0 with header line.
data l type i.
import itab1 from memory id 'ABC' .
describe table itab1 lines l.
free memory id 'ABC'.
write:/ 'total records are:', l.
Please give your suggestion why its going for dump in the second iteration.
thanks in advance.

Passing value to select options screen.

Hi All,
Can anybody help me how to pass a value to select option screen from another screen?
It's like a user enters a value in a input field and press a button to navigate to the next screen which contains the select option fields.How can i show the value enterd in the previous screen to be shown in one of teh input field in the select option screen.

Hi,
Store the values that you have to pass in a global variable declared in component controller and
Use the following piece of code in the second view,
DATA: lt_range_table TYPE REF TO data,
 rt_range_table TYPE REF TO data,
 read_only TYPE abap_bool,
 typename TYPE string.
* create a range table that consists of this new data element
lt_range_table = lo_r_helper_class->create_range_table( i_typename = 'MATNR' ).
FIELD-SYMBOLS: <tab> TYPE INDEX TABLE,
<struct> TYPE ANY,
<wa> TYPE ANY,
<option> TYPE char2,
<sign> TYPE char1,
<high> TYPE ANY,
<low> TYPE ANY,
<wa_values> TYPE ANY.
ASSIGN lt_range_table->* TO <tab>.
APPEND INITIAL LINE TO <tab> ASSIGNING <wa>.
ASSIGN COMPONENT 'OPTION' OF STRUCTURE <wa> TO <option>.
ASSIGN COMPONENT 'HIGH' OF STRUCTURE <wa> TO <high>.
ASSIGN COMPONENT 'LOW' OF STRUCTURE <wa> TO <low>.
ASSIGN COMPONENT 'SIGN' OF STRUCTURE <wa> TO <sign>.
<sign> = 'I'. "Default sign which you want to give
<option> = 'EQ'. "Default option you want to give
<low> = 'M-01'." pass your valriable name here
*<high> = 'High_value'.
* add a new field to the selection
lo_r_helper_class->add_selection_field( i_id = 'S_MATNR'
i_description = 'Material'
it_result = lt_range_table ).
Regards,
Radhika.

Values of select-option in various variants

Hi all,
does anybody know a report to determine the values of a specific select-option in various variants of a program?
I know the function module RS_VARIANT_CONTENTS to get the values of select-options in one variant of a program (TABLES-parameter VALUTAB), but I need it for many variants (like a prgram which calls the function module for all variants of a program).
Does anybody know a possibility?
Thanks
Daniel

You will probably have to write your own code for this. You could still check the where-used-list of RS_VARIANT_CONTENTS (or related function modules in the same function group) to see if there is any available standard program for your purpose.
If you find one, please let us know here in this thread.
Thomas

Default value for select options.

Hi folks
I have to default four values in select-options.
eg.,
S_lfart for likp-lfart, default zse, zin, znd, zps.
Thanks in Advance,
Rao

Hi,
Go through the following syntax:
SELECT-OPTIONS <sel> FOR <f>
 [DEFAULT <g> [to <h>] [OPTION <op>] SIGN <s>]
 [MEMORY ID <pid>]
 [LOWER CASE]
 [OBLIGATORY]
 [NO-DISPLAY]
 [MODIF ID <key>]
 [NO-EXTENSION]
 [NO INTERVALS]
 [NO DATABASE SELECTION].
Declares a selection table <sel> for the field <f>. For <sel>, places input fields on the corresponding selection screen. The additions allow you to set a default value, accept input in lowercase, define a required field, suppress or modify the display on the selection screen, restrict the selection table to a line or a selection to a single field, or prevent input from being passed to a logical database
Regards,
Bhaskar

How to pass internal table values to parameter

hi,
 how to pass internal table values to parameter in selection screen.if is it possible means please sent codeings.
thanks.
stalin.

hi,
tables : mara.
data : begin of itab_mara occurs 0,
 matnr like mara-matnr,
 ernam like mara-ernam,
 end of itab_mara.
selection-screen : begin of block blk1 with frame title text-001.
parameters : p_matnr like mara-matnr.
selection-screen : end of block blk1.
select matnr ernam from mara into corresponding fields of itab_mara
 where matnr = p_matnr.
loop at itab_mara.
write :/ itab_mara-matnr,
 itab_mara-ernam.
endloop.
<REMOVED BY MODERATOR>
Message was edited by:
 Alvaro Tejada Galindo

How to assign list of default value for select-option variable???

Hi every one
This is Deepak,
I want to know how to assign list of default value to select-option variable ? please any body tel me solution
for example
select-option matnr for mara-matnr default ..............and here i want to give more than 1 values that will be default value and use can choose any one at the time of input .
Thank you in advance
Deepak

Hi.
Check the following sample code.
REPORT ztn_test.
" It is example for list populating.
TABLES:knvp.
data: BEGIN OF itab OCCURS 10,
kunnr like knvp-kunnr,
END OF itab.
data: wa_itab like itab.
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
PARAMETERS: s_kunnr(20) type c as LISTBOX VISIBLE LENGTH 40 .
AT SELECTION-SCREEN OUTPUT.
SELECT kunnr from knvp into CORRESPONDING FIELDS OF TABLE itab WHERE parvw = 'SP'. " SP for ur requirement
" I have used loop to populate some values from table
loop at itab into wa_itab.
name = 'S_KUNNR'.
value-key = sy-tabix.
value-text = wa_itab-kunnr.
append value to list.
clear wa_itab.
endloop.
" If u want individaully assign the values change the code as
name = 'S_KUNNR'." Select option name
value-key = 1." Index
value-text = 'VAL1'.
append value to list.
name = 'S_KUNNR'." Select option name
value-key = 2." Index
value-text = 'VAL2'.
append value to list.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING id = name
values = list.
Edited by: tahir naqqash on Feb 21, 2009 4:38 PM

Internal table values to select-options

Similar Messages

Maybe you are looking for