Internal tables for OM infotypes when LDB is used

It's pretty much clear that for the infotypes used in a report, when a logical database is used the corresponding structures with pxxxx is created.
Is that limited only for PA infotypes or is that applicable to OM infotypes also? I could identify that it is applicable for OM also with my report usage, but i cant justify how is that done.
If it is applicable to OM infotypes, can you please explain in detail about this?
I have tried this in many forms but in vain.(research has been made before posting)
Edited by: mythrikalam on Jan 20, 2012 11:59 AM

Hi! First I would create a system repair disc. If you still have a problem, restoring back to factory will eliminate software and you can start finding what hardware is causing you this problem. Key Board or Mother Board would be good suspects.
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
http://forums.toshiba.com/t5/Computer-Troubleshooting/What-can-I-do-if-my-Windows-7-or-Windows-Vista...
PS Strange that it won't turn on with the power button. Are you holding it down for a couple of seconds?
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Similar Messages

Fill Internal Table for Table Header EQUI - Long Time

Good morning,
I have installed DMIS (2006_1_620) and DMIS_CNT (2006_1_620), both at the level of SP = 13.
I am running the subactivity "Fill Internal Table for Table Header EQUI" and have 1 day + 10 hours and continue working.
Also note that the table CNVTDMS_05_equi is increased million in millions and now has 6 million records.
It is normal to take a long time? (EQUI table has 240 million records and therefore will take many days).
Any suggestions?
Thanks,
Hugo

Hello Hugo,
I know this is old , but did you ever find a solution to this. I am having the same problem. I considered adding an index to table QMIH, with Keys MANDT and BEQUI.
I also only have one bckgrd proc running in sender systems with this statement when I drill in using SM50:
SELECT
/*+
FIRST_ROWS (1)
FROM
"QMIH"
WHERE
"MANDT"=:A0 AND "BEQUI"=:A1 AND ROWNUM <=:A2 #
This has been running for over 8hrs now.
Any thoughts?
Thanks,
NICK

How to Read the internal table for the data download from the spool

HI all,
I have one issue regarding the spool ,we are getting the correct output as per requirement of user but when we send the same to the user in pdf format they did notget the same.
they are telling that the due date is missing from the pdf.
Please advice me how to track the internal table for the spool data converted intopdf in a readable format.
the FM used for the above task is :
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Please reply if any one worked on the same.
Thanks in advance.
Gaurav,

Hi Wang,
Please let me know how you solved your question.
Points will be rewarded.
Thanks,
Arun.

How to create internal table for a structure in BSP

hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
                 include type zuvendstr.
                 data:end of itab_1.
                 data wa_str like line of itab_1.
                 loop at itab_1 into wa_str. %>
                <tr>
                 <td><%=wa_str-name%> </td>
                       <%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPS

Hi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy

Number of entries in the internal table for perticular field value

hi All,
Is this possible to get the count of records from the internal table for a perticular field value.
currently my requirement is to get the entries from the internal table which does not have two records for perticular field value (say a = 123) whose status is active (say b = 'X').
also suggets should use LOOP or DELETE or DESCRIBE for a internal table to ful fill this requirement.
Thanks in advance.
Pradeep

Try like this..
Create another table itab2 with same structure as itab1 & move the contents of itab1 to itab2
ITAB2[] = ITAB1[].
Then delete entries from itab2
Delete itab2 whete a = '123' and b = 'X'
Then use Describe statement to get the no of entries
Describe table itab2 lines v_lines.
Hope this helps...

To count number of records in an internal table for a condition

Hello All,
I want to count number of records in an internal table for a condition.
For e.g. -- I have one internal table IT which having fields F1, F2, F3, F4, F5.
Now, I want number of records in itnternal table IT where F1 = 'ABC'.
Is it possible to do..?? If yes, then how.??
Thanks in advance...!!
Regards,
Poonam.

Hi,
If you mean an internal table, there are a few ways to do this.
1 One would be to loop over the table with a WHERE clause and increment a counter.
data: lv_counter type i.
clear lv_counter.
loop at itab where fld1 = 'ABC'.
lv_counter = lv_counter + 1.
endloop.
lv_counter now has the number of rows per the condiction.
2 Well, you may want to try this as well, and compare to the LOOP way. Not sure what kind of overhead you may get doing this way. Here ITAB is our main internal table, and ITAB_TMP is a copy of it. Again I think there may be some overhead in doing the copy. Next, delete out all records which are the reverse of your condition. Then whatever is left is the rows that you want to count. Then simply do a LINES operator on the internal table, passing the number of lines to LV_COUNT.
data: itab type table of ttab.
data: itab_tmp type table of ttab.
itab_tmp[] = itab[].
delete table itab_tmp where fld1 'ABC'.
lv_count = lines( itab_tmp ).
Thanks & Regards,
ShreeMohan

Tables for OM infotype 1000, 1001 and 1002

Hi,
I need to use OM infotypes P1000, P0001 and P1002. But, I don't know the name of the tables for these infotypes.
Could you please provide me the table names for the above infotypes.
Lokman

Sorry ignore my prev post:
refer hrp1000
HRP1002
AND HRP1001
Message was edited by: Ravi Kanth Talagana

Dynamic Internal Table for reading data from external file

Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
Kumar

Hi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards

Hp pavilion dv6 6180 help me for this error when I am using my recovery disk

hp pavilion dv6 6180 help me for this error when I am using my recovery disk
The destination drive is not connected

Hello Mohammadshamlou. I understand that you're having some issues using your Recovery Disc. It is giving you the error that the drive is not connected. Is this correct? How long have you had the notebook?
What issue originally led you to want to try a recovery?
The error seems to imply that it is not detecting the hard drive as this would be the most logical destination drive. So, I feel the best thing to try first is verify that the hard drive is in proper working order. Follow these steps and please post the result.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

How AP behaves for withholding tax when vertax is used for tax calculation

Hi,
I am currently working on R12 implementation, I have requirement where business has to calculate the USE tax and withhold it from being paid to the supplier in case if use tax is not mentioned on the Invoice and pay it to tax authorities directly by business. Our client has Vertax third party tax engine. now the question is does it works same as it is in oracle payables in cases if client want to use vertax to calculate tax. How oracle behaves for withholding tax when vertax is used for tax calculations.
Regards,
Shashi.

Hi
Cheque Go to Menubar of which document you have to post for getting the WHT value Menubar Settings - editing options - remove the tick calculate tax on net amount.
Rgds
Vani

Select on MARA resulting into # values in internal table for one field

Hi Team,
I have written a SELECT statement on MARA table as below.
TRY.
        SELECT matnr zzwftag FROM mara CLIENT SPECIFIED
          INTO CORRESPONDING FIELDS OF TABLE gt_mara WHERE
          mandt = sy-mandt AND
          zzwftag NE space
          AND zzwftag IS NOT NULL
          AND zzwftag NE '#'
          AND zzwftag NE '%#%'
          AND zzwftag NE ' '
          AND zzwftag NOT LIKE '%/%'(012).
      CATCH cx_sy_dynamic_osql_error.
        MESSAGE 'Error While Fetching Data from MARA'(044) TYPE 'S'(040) DISPLAY LIKE 'W'(041).
    ENDTRY.
    IF NOT gt_mara[] IS INITIAL.
      DELETE gt_mara[] WHERE zzwftag EQ '#'
      OR zzwftag IS INITIAL
      OR zzwftag EQ space
      OR zzwftag EQ ' '.
    ENDIF.
Observations: 1. In
the resulting internal table I am seeing '#' values for fields zzwftag which are actually empty when I see the record in SE11 in MARA(ALV display). It shows '#' in it in SE16 display(We can choose User parameters and hence mode of display in SE11)
The requirement is to avoid those records where zzwftag is initial i.e. blank. I tried to delete invalid records but to no avail.
Please suggest any way where I can get the Select correct.
Regards,
Amit

Please do not use so many not conditions in one query....
Using so many negative conditions results in bad data.
Instead use delete statements later this would not confuse the system.
Also if you are using sy-mandt then i think you should not use client specified system will take care of it.
TRY.
SELECT matnr zzwftag FROM mara CLIENT SPECIFIED
INTO CORRESPONDING FIELDS OF TABLE gt_mara WHERE
mandt = sy-mandt AND
zzwftag NE space.
CATCH cx_sy_dynamic_osql_error.
MESSAGE 'Error While Fetching Data from MARA'(044) TYPE 'S'(040) DISPLAY LIKE 'W'(041).
ENDTRY.
IF NOT gt_mara[] IS INITIAL.
DELETE gt_mara[] WHERE zzwftag EQ '#'
OR zzwftag IS INITIAL
OR zzwftag EQ space
OR zzwftag EQ ' '.
delete gt_mara[] where zzwflag eq '%#%'.
ENDIF.

Custom Subtype table for custom Infotype

Hi,
How can I have a customer table Z* as subtype for an infotype? In PM01 I can set a Z table and field in infotype settings, but an error occurs when genarating my infotype.
I would like someting similar to IT 2006 in my custom infotype where I would have a specific Z table as subtype (not a generic one like t591a) so that new entries in that Z table appears as new subtype options.
Thanks and regrads.
Sérgio.

Hi,
The Subtype Table doesn't contain the Subtype Field.
For Example: PM01 for IT 2006 has Subtype Table T556A, Subtype Field KTART (which is not part of T556A).
KTART is a field in the IT2006 Structure itself.
Subtype Table is used just for the Values of the subtypes, Texts, Time Constraints and Object IDs.
Can you mention what the Structure of Z table is, and what the Subtype Field is.
Thanks,
Suryakiran D.

Divide the internal table for months

How to divide the internal table itab for the months?
I have a field data in internal table itab and now i have need to divide itab in n table for months.
The data interval is max 4 months.
Sorry for my english.
ex. itab.
data: begin of itab occurs 0,
             data LIKE vbak-erdat,
             num_ord LIKE vbap-vbeln,
             gruppo LIKE mara-labor,
        end of itab.

I have solved in this method:
SORT tab_gia DESCENDING BY data.
tmp_mese = tab_gia-data+4(2).
LOOP AT tab_gia.
    IF tmp_mese EQ tab_gia-data+4(2).
      IF flag1 = 'TRUE'.
        MOVE tab_gia-data     TO mese1-data.
        MOVE tab_gia-gruppo   TO mese1-gruppo.
        MOVE tab_gia-tipo     TO mese1-tipo.
        MOVE tab_gia-matnr    TO mese1-matnr.
        MOVE tab_gia-giacenza TO mese1-giacenza.
        APPEND mese1.
      ENDIF.
      IF flag2 EQ 'TRUE'.
        MOVE tab_gia-data     TO mese2-data.
        MOVE tab_gia-gruppo   TO mese2-gruppo.
        MOVE tab_gia-tipo     TO mese2-tipo.
        MOVE tab_gia-matnr    TO mese2-matnr.
        MOVE tab_gia-giacenza TO mese2-giacenza.
        APPEND mese2.
      ENDIF.
      IF flag3 EQ 'TRUE'.
        MOVE tab_gia-data     TO mese3-data.
        MOVE tab_gia-gruppo   TO mese3-gruppo.
        MOVE tab_gia-tipo     TO mese3-tipo.
        MOVE tab_gia-matnr    TO mese3-matnr.
        MOVE tab_gia-giacenza TO mese3-giacenza.
        APPEND mese3.
      ENDIF.
      IF flag4 EQ 'TRUE'.
        MOVE tab_gia-data     TO mese4-data.
        MOVE tab_gia-gruppo   TO mese4-gruppo.
        MOVE tab_gia-tipo     TO mese4-tipo.
        MOVE tab_gia-matnr    TO mese4-matnr.
        MOVE tab_gia-giacenza TO mese4-giacenza.
        APPEND mese4.
      ENDIF.
    ELSE.
* trovato un altro mese.
      cnt = cnt + 1.
      tmp_mese = tab_gia-data+4(2).
      CASE cnt.
        WHEN 2.
          flag1 = 'FALSE'.
          flag2 = 'TRUE'.
        WHEN 3.
          flag2 = 'FALSE'.
          flag3 = 'TRUE'.
        WHEN 4.
          flag3 = 'FALSE'.
          flag4 = 'TRUE'.
      ENDCASE.
    ENDIF.
ENDLOOP.
thanks!!!
Edited by: Alfonso Manzo on May 28, 2008 1:51 PM
Edited by: Alfonso Manzo on May 28, 2008 1:52 PM

Edit Internal Table for Sales Order Smartform (Y640_SDORC_A)

I want to modify SmartForm Y640_SDORC_A so I always print the net value and discount percentage.
I have an access sequence and my discount can be created by a discount percentage condition (ZD00) or by Special Price (PR01) condition.
My problem is that if I use the Special Price Condition the Internal Table where the smartform loops to get the price only gets the Net Value amount, and it wont print the discount percentage, but if I dont use the Special Price condition the internal value has 2 rows the first one is for Discount Condition and the second for Net Value and it prints correctly.
This is how my access secuence is arranged, the X are the print id column:
PR00 Price
ZD00 Discount      (X)
PR01 Special Price
--- Net Value    (X)
How can I fix the internal table creation so when there is a Special Price Condition (PR01) the internal table also gets the Discount percentage value.
Here is my Forms Code:
*&      Form GET_ITM_PRICE_TABLE
FORM get_itm_price_table
USING
is_vbdpa             TYPE vbdpa
is_vbdka             TYPE vbdka
iv_price_print_mode TYPE c
iv_spras             TYPE spras
CHANGING
ct_komv              TYPE t_komv_tab
ct_komvd             TYPE t_komvd_tab
cs_komk              TYPE komk.
DATA ls_komp TYPE komp.
DATA ls_komk TYPE komk.
* DATA lt_tkomv TYPE STANDARD TABLE OF komv.
IF ls_komk-knumv NE is_vbdka-knumv OR
ls_komk-knumv IS INITIAL.
    CLEAR ls_komk.
    ls_komk-mandt = sy-mandt.
    ls_komk-kalsm = is_vbdka-kalsm.
    ls_komk-kappl = 'V'.
    ls_komk-waerk = is_vbdka-waerk.
    ls_komk-knumv = is_vbdka-knumv.
    ls_komk-knuma = is_vbdka-knuma.
    ls_komk-vbtyp = is_vbdka-vbtyp.
    ls_komk-land1 = is_vbdka-land1.
    ls_komk-vkorg = is_vbdka-vkorg.
    ls_komk-vtweg = is_vbdka-vtweg.
    ls_komk-spart = is_vbdka-spart.
    ls_komk-bukrs = is_vbdka-bukrs_vf.
    ls_komk-hwaer = is_vbdka-waers.
    ls_komk-prsdt = is_vbdka-erdat.
    ls_komk-kurst = is_vbdka-kurst.
    ls_komk-kurrf = is_vbdka-kurrf.
    ls_komk-kurrf_dat = is_vbdka-kurrf_dat.
ENDIF.
ls_komp-kposn = is_vbdpa-posnr.
ls_komp-kursk = is_vbdpa-kursk.
ls_komp-kursk_dat = is_vbdpa-kursk_dat.
IF is_vbdka-vbtyp CA 'HKNOT6'.
    IF is_vbdpa-shkzg CA ' A'.
      ls_komp-shkzg = 'X'.
    ENDIF.
ELSE.
    IF is_vbdpa-shkzg CA 'BX'.
      ls_komp-shkzg = 'X'.
    ENDIF.
ENDIF.
IF iv_price_print_mode EQ 'A'.
    CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
      EXPORTING
        comm_head_i = ls_komk
        comm_item_i = ls_komp
        language    = iv_spras
      IMPORTING
        comm_head_e = ls_komk
        comm_item_e = ls_komp
      TABLES
        tkomv       = ct_komv
        tkomvd      = ct_komvd.
ELSE.
    CALL FUNCTION 'RV_PRICE_PRINT_ITEM_BUFFER'
      EXPORTING
        comm_head_i = ls_komk
        comm_item_i = ls_komp
        language    = iv_spras
      IMPORTING
        comm_head_e = ls_komk
        comm_item_e = ls_komp
      TABLES
        tkomv       = ct_komv
        tkomvd      = ct_komvd.
ENDIF.
cs_komk = ls_komk.
ENDFORM.                    "get_itm_price_table
Regards,
Carlos

Turns out this can be done modifiying access sequence.
Carlos

How to append row in internal table for perticular condition

Hi,
I have 4 records in my internal table and i want to append row
after second row when condition will match.
please guide me.
thanks in advancs
regards
SND

hi,
using key word INDEX u can insert a record in aspecified position as
if internal table is with header line.
INSERT <internaltable> index SY_INDEX [or index no if u know where to insert]
with out header line.
INSERT <internaltable> FROM <workarea> index SY_INDEX [or index no if u know where to insert]
if condition is true.
insert itab index 2.
endif.
if helpful reward some points.
with regards,
Suresh.A

Internal tables for OM infotypes when LDB is used

Similar Messages

Maybe you are looking for