Internal user sending e-mail with MailChimp identified as Suspected SPAM

Just wondering what people do when they have e-mails detected as SPAM or Suspected SPAM from spam houses like Mail Chimp.  Is it effective to just report the false positive to [email protected]?
I started down the path of adding the sender to a policy that isn't scanned for SPAM, but they use a different sender address for every e-mail.  I think looked at adding their hosts to a different policy but they have a lot and I would like to still scan their e-mail in general.
Appreciate any input,
Jason

Hi Jason,
in general, it's good idea to submit false positives to [email protected] In case your settings are to send suspected Spam and positive Spam into the Spam quarantine, you can enable the checkbox in the quarantine settings to submit messages automatically to Cisco once released. I would recommended to deliver suspected Spam messages in general to users and only send Spam messages into the quarantine. Suspected Spam is merely a grey zone which means that the messages flagged at that are mostly not Spam but share some common similarities with typical Spam messages.
If the Safelist/Blocklist feature is enabled users can add senders in the safelist to ensure mails are delivered to the inboxes. Otherwise you could add the domain name with a leading dot ".example.com" into the Withelist sendergroup or any other sendergroup that still does Anti-Spam scanning, but with throttling policy applied.
I hope this helps.
Best regards,
Enrico

Similar Messages

  • Delayed mail for internal user send a mail to gmail account

    hi to every one,
    Today we are facing an issue in exchange server 2010
    Whenever internal user send a mail to some of gmail accounts user receives a mail from postmaster states that
    This is an automatically generated Delivery Status Notification.
    THIS IS A WARNING MESSAGE ONLY.
    YOU DO NOT NEED TO RESEND YOUR MESSAGE.
    Delivery to the following recipients has been delayed.
    Action: delayed
    Status: 4.4.7
    Will-Retry-Until:
    Regards
    Kart26

    Hi,
    Did the issue occur when the specific user you mentioned above sent email to two gmail users at a time?
    Is there any recipient limit for this specific user?
    To narrow down the issue, I recommend you check the smtp log about this specific user for related messages.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Send a mail with the class CL_HTTP_CLIENT

    hi,
    i use this program and i would send a mail with a attachment file PDF. I try to use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 but i dont know to translate the data XSTRING to internal table.
    Thank you.
    *& Report  ZYTEST_TRANSFER_URL2                                        *
    REPORT  zytest_transfer_url2                    .
    *- begin of internal data
    TYPE-POOLS: swfxc, icon.
    DATA: l_http_client TYPE REF TO if_http_client.
    DATA: l_url TYPE string.
    DATA: l_code TYPE sy-subrc.
    DATA: l_code_string TYPE string.
    DATA: l_message_string TYPE string.
    DATA: lt_http_fields TYPE tihttpnvp.
    DATA: l_http_field_wa TYPE ihttpnvp.
    DATA: l_char_header(40) TYPE c.
    DATA: l_body_string TYPE string.
    DATA : line TYPE string.
    DATA: result_tab TYPE TABLE OF string,
    result_str TYPE string.
    *- end of internal data
    DATA: lv_contents TYPE string.
    DATA: lv_location TYPE string.
    *- begin of parameters
    PARAMETERS: url TYPE swc_value.
    PARAMETERS : receiver TYPE somlreci1-receiver LOWER CASE.
    *- end of parameters
    START-OF-SELECTION.
      PERFORM main.
    *& Form main
    text
    FORM main.
    PERFORM get_contents USING lv_contents.
    *- Create the HTTP-Client
      l_url = url.
    l_proxy_host =
    l_proxy_service =
      CALL METHOD cl_http_client=>create_by_url
      EXPORTING
      url = l_url
    proxy_host = l_proxy_host
    proxy_service = l_proxy_service
      IMPORTING
      client = l_http_client
      EXCEPTIONS
      argument_not_found = 1
      plugin_not_active = 2
      internal_error = 3
      OTHERS = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    *- send the http post
      CALL METHOD l_http_client->send
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2.
      IF sy-subrc <> 0.
        WRITE: / icon_red_light AS ICON.
        CALL METHOD l_http_client->get_last_error
          IMPORTING
            code    = l_code
            MESSAGE = l_message_string.
        CALL METHOD l_http_client->close.
        l_code_string = l_code.
        CONCATENATE 'HTTP-Send: RC=' l_code_string              "#EC NOTEXT
        INTO l_code_string .
        CONCATENATE l_code_string l_message_string
        INTO l_message_string SEPARATED BY space.
        PERFORM print_string USING l_message_string.
        EXIT.
      ENDIF.
    *- receive the result of http post
      CALL METHOD l_http_client->receive
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2.
      IF sy-subrc <> 0.
        WRITE: / icon_red_light AS ICON.
        CALL METHOD l_http_client->get_last_error
          IMPORTING
            code    = l_code
            MESSAGE = l_message_string.
        CALL METHOD l_http_client->close.
        l_code_string = l_code.
        CONCATENATE 'HTTP-Receive: RC=' l_code_string           "#EC NOTEXT
        INTO l_code_string .
        CONCATENATE l_code_string l_message_string
        INTO l_message_string SEPARATED BY space.
        PERFORM print_string USING l_message_string.
        EXIT.
      ENDIF.
    *- print the results
      CALL METHOD l_http_client->response->get_status
        IMPORTING
          code = l_code.
      IF l_code < 300.
    HTTP-codes: 100 - 199 = informations
    HTTP-codes: 200 - 299 = client-request successful (200 = OK)
        WRITE: / icon_green_light AS ICON.
      ELSE.
    HTTP-codes: 300 - 399 = redirected; further actions required
    HTTP-codes: 400 - 499 = client-request incomplete
    HTTP-codes: 500 - 599 = server errors
        WRITE: / icon_red_light AS ICON.
      ENDIF.
    *-- get the http header fields
      CALL METHOD l_http_client->response->get_header_fields
        CHANGING
          fields = lt_http_fields.
      LOOP AT lt_http_fields INTO l_http_field_wa.
        l_char_header = l_http_field_wa-name.
        WRITE: / l_char_header.
        l_char_header = l_http_field_wa-value.
        WRITE: l_char_header.
      ENDLOOP.
      WRITE: / sy-uline.
    *- get the body
      DATA: lv_bin_contents TYPE xstring.
      lv_bin_contents = l_http_client->response->get_data( ).
      PERFORM save_file USING lv_bin_contents.
    ENDFORM. "main
    *& Form print_string
    FORM print_string USING p_string TYPE string.
      REFRESH result_tab.
      SPLIT p_string AT cl_abap_char_utilities=>cr_lf INTO TABLE result_tab.
      LOOP AT result_tab INTO result_str.
        WRITE:/ result_str.
      ENDLOOP.
    ENDFORM. " print_string
    *& Form save_file
    text
    FORM save_file USING lv_bin_contents.
      DATA: save_file(1000) TYPE c VALUE '/tmp/test3.pdf'.
      DATA: lv_file TYPE localfile.
      DATA : g_file(80).
      g_file = url.
      DO.
        SHIFT g_file LEFT UP TO '/'.
        IF sy-subrc NE 0.
          EXIT.
        ENDIF.
        SHIFT g_file LEFT.
      ENDDO.
      SHIFT g_file RIGHT UP TO '.'.
      SHIFT g_file RIGHT.
      lv_file = save_file.
      OPEN DATASET lv_file FOR OUTPUT IN BINARY MODE.
      IF sy-subrc NE 0.
        WRITE:'SY-SUBRC :',sy-subrc.
    MESSAGE i000 WITH text-014. "'File Directory not found'.
        EXIT.
      ENDIF.
      TRANSFER lv_bin_contents TO lv_file.
      CLOSE DATASET lv_file.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      IF sy-subrc EQ 0.
    MESSAGE i000 WITH text-012."'Successfully downloaded to Application
    server'.
        EXIT.
      ENDIF.
    ENDFORM. "save_file

    hi,
    i use this program and i would send a mail with a attachment file PDF. I try to use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 but i dont know to translate the data XSTRING to internal table.
    Thank you.
    *& Report  ZYTEST_TRANSFER_URL2                                        *
    REPORT  zytest_transfer_url2                    .
    *- begin of internal data
    TYPE-POOLS: swfxc, icon.
    DATA: l_http_client TYPE REF TO if_http_client.
    DATA: l_url TYPE string.
    DATA: l_code TYPE sy-subrc.
    DATA: l_code_string TYPE string.
    DATA: l_message_string TYPE string.
    DATA: lt_http_fields TYPE tihttpnvp.
    DATA: l_http_field_wa TYPE ihttpnvp.
    DATA: l_char_header(40) TYPE c.
    DATA: l_body_string TYPE string.
    DATA : line TYPE string.
    DATA: result_tab TYPE TABLE OF string,
    result_str TYPE string.
    *- end of internal data
    DATA: lv_contents TYPE string.
    DATA: lv_location TYPE string.
    *- begin of parameters
    PARAMETERS: url TYPE swc_value.
    PARAMETERS : receiver TYPE somlreci1-receiver LOWER CASE.
    *- end of parameters
    START-OF-SELECTION.
      PERFORM main.
    *& Form main
    text
    FORM main.
    PERFORM get_contents USING lv_contents.
    *- Create the HTTP-Client
      l_url = url.
    l_proxy_host =
    l_proxy_service =
      CALL METHOD cl_http_client=>create_by_url
      EXPORTING
      url = l_url
    proxy_host = l_proxy_host
    proxy_service = l_proxy_service
      IMPORTING
      client = l_http_client
      EXCEPTIONS
      argument_not_found = 1
      plugin_not_active = 2
      internal_error = 3
      OTHERS = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    *- send the http post
      CALL METHOD l_http_client->send
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2.
      IF sy-subrc <> 0.
        WRITE: / icon_red_light AS ICON.
        CALL METHOD l_http_client->get_last_error
          IMPORTING
            code    = l_code
            MESSAGE = l_message_string.
        CALL METHOD l_http_client->close.
        l_code_string = l_code.
        CONCATENATE 'HTTP-Send: RC=' l_code_string              "#EC NOTEXT
        INTO l_code_string .
        CONCATENATE l_code_string l_message_string
        INTO l_message_string SEPARATED BY space.
        PERFORM print_string USING l_message_string.
        EXIT.
      ENDIF.
    *- receive the result of http post
      CALL METHOD l_http_client->receive
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2.
      IF sy-subrc <> 0.
        WRITE: / icon_red_light AS ICON.
        CALL METHOD l_http_client->get_last_error
          IMPORTING
            code    = l_code
            MESSAGE = l_message_string.
        CALL METHOD l_http_client->close.
        l_code_string = l_code.
        CONCATENATE 'HTTP-Receive: RC=' l_code_string           "#EC NOTEXT
        INTO l_code_string .
        CONCATENATE l_code_string l_message_string
        INTO l_message_string SEPARATED BY space.
        PERFORM print_string USING l_message_string.
        EXIT.
      ENDIF.
    *- print the results
      CALL METHOD l_http_client->response->get_status
        IMPORTING
          code = l_code.
      IF l_code < 300.
    HTTP-codes: 100 - 199 = informations
    HTTP-codes: 200 - 299 = client-request successful (200 = OK)
        WRITE: / icon_green_light AS ICON.
      ELSE.
    HTTP-codes: 300 - 399 = redirected; further actions required
    HTTP-codes: 400 - 499 = client-request incomplete
    HTTP-codes: 500 - 599 = server errors
        WRITE: / icon_red_light AS ICON.
      ENDIF.
    *-- get the http header fields
      CALL METHOD l_http_client->response->get_header_fields
        CHANGING
          fields = lt_http_fields.
      LOOP AT lt_http_fields INTO l_http_field_wa.
        l_char_header = l_http_field_wa-name.
        WRITE: / l_char_header.
        l_char_header = l_http_field_wa-value.
        WRITE: l_char_header.
      ENDLOOP.
      WRITE: / sy-uline.
    *- get the body
      DATA: lv_bin_contents TYPE xstring.
      lv_bin_contents = l_http_client->response->get_data( ).
      PERFORM save_file USING lv_bin_contents.
    ENDFORM. "main
    *& Form print_string
    FORM print_string USING p_string TYPE string.
      REFRESH result_tab.
      SPLIT p_string AT cl_abap_char_utilities=>cr_lf INTO TABLE result_tab.
      LOOP AT result_tab INTO result_str.
        WRITE:/ result_str.
      ENDLOOP.
    ENDFORM. " print_string
    *& Form save_file
    text
    FORM save_file USING lv_bin_contents.
      DATA: save_file(1000) TYPE c VALUE '/tmp/test3.pdf'.
      DATA: lv_file TYPE localfile.
      DATA : g_file(80).
      g_file = url.
      DO.
        SHIFT g_file LEFT UP TO '/'.
        IF sy-subrc NE 0.
          EXIT.
        ENDIF.
        SHIFT g_file LEFT.
      ENDDO.
      SHIFT g_file RIGHT UP TO '.'.
      SHIFT g_file RIGHT.
      lv_file = save_file.
      OPEN DATASET lv_file FOR OUTPUT IN BINARY MODE.
      IF sy-subrc NE 0.
        WRITE:'SY-SUBRC :',sy-subrc.
    MESSAGE i000 WITH text-014. "'File Directory not found'.
        EXIT.
      ENDIF.
      TRANSFER lv_bin_contents TO lv_file.
      CLOSE DATASET lv_file.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      IF sy-subrc EQ 0.
    MESSAGE i000 WITH text-012."'Successfully downloaded to Application
    server'.
        EXIT.
      ENDIF.
    ENDFORM. "save_file

  • How to send e-mail with an attachment from remote database server.???

    Hi All,
    I have tried the simple mail sending and with the attachment using UTL_SMTP. But the problem is , it is sending the mail with attachment of the file name i give, it takes and creates that file and sends as attachment not from the actual file location. I am trying to attach the file which i stored in remote database server.
    The following code I tried. But not worked for attachment
    DECLARE
       v_From       VARCHAR2(80) := '[email protected]';
       v_Recipient  VARCHAR2(80) := '[email protected]';
       v_Subject    VARCHAR2(80) := 'test subject';
       v_Mail_Host  VARCHAR2(30) := 'pop3.somedomain.com';
       v_Mail_Conn  utl_smtp.Connection;
       crlf         VARCHAR2(2)  := chr(13)||chr(10);
    BEGIN
      v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
      utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
      utl_smtp.Mail(v_Mail_Conn, v_From);
      utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
      utl_smtp.Data(v_Mail_Conn,
        'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
        'From: '   || v_From || crlf ||
        'Subject: '|| v_Subject || crlf ||
        'To: '     || v_Recipient || crlf ||
        'MIME-Version: 1.0'|| crlf ||     -- Use MIME mail standard
        'Content-Type: multipart/mixed;'|| crlf ||
        ' boundary="-----SECBOUND"'|| crlf ||
        crlf ||
        '-------SECBOUND'|| crlf ||
        'Content-Type: text/html;'|| crlf ||
        'Content-Transfer_Encoding: 7bit'|| crlf ||
        crlf ||
        'some message text'|| crlf ||     -- Message body
        'more message text'|| crlf ||
        crlf ||
        '-------SECBOUND'|| crlf ||
        'Content-Type: text/html;'|| crlf ||
        ' name="Fund Authorization report"'|| crlf ||
        'Content-Transfer_Encoding: 8bit'|| crlf ||
        'Content-Disposition: attachment;'|| crlf ||
        ' filename="/usr/tmp/Test.html"'|| crlf ||
        crlf ||
        'HTML Attachment'|| crlf ||     -- Content of attachment
        crlf ||
        '-------SECBOUND--'               -- End MIME mail
      utl_smtp.Quit(v_mail_conn);
    EXCEPTION
      WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
        raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
    END;How can I attach a file which is stored in database server and send it in a mail.
    Please someone help me in this.
    Thanks,
    Alaka.

    Try this code
    Regards Salim.
    CREATE OR REPLACE TRIGGER EmailOnServerErr AFTER SERVERERROR ON DATABASE
    DECLARE
       mail_conn       UTL_SMTP.connection;
       crlf            VARCHAR2(2) := chr(13)||chr(10);
       msg             VARCHAR2(32760);
       sid_name        VARCHAR2(16);
       bdump_dest      VARCHAR2(128);
       smtp_relay      VARCHAR2(32) := 'MyMailRelay';
       recipient_address  VARCHAR2(64) := '[email protected]';
       sender_address     VARCHAR2(64) := '[email protected]';
       mail_port       NUMBER := 25;
       log_file_handle UTL_FILE.FILE_TYPE;
       log_file_dir    VARCHAR2(256) := 'ERR_LOG_DIR';
       log_file_name   VARCHAR2(256) := 'OracleErrors.log';
       maxlinesize     NUMBER := 32767;
       session_rec     sys.v_$session%ROWTYPE;
       audit_rec       sys.dba_audit_trail%ROWTYPE;
       auditing        BOOLEAN;
       LinesOfSQL      BINARY_INTEGER;
       offending_sql   DBMS_STANDARD.ora_name_list_t;
       CURSOR bdump_cur IS
          SELECT TRIM(value)
          FROM v$parameter
          WHERE name = 'background_dump_dest'
       CURSOR sid_cur IS
          SELECT TRIM(instance_name)
          FROM v$instance
       CURSOR session_cur IS
          SELECT s.*
          FROM v$session s
          WHERE s.sid = dbms_support.mysid
       CURSOR audit_trail_cur(AUDSID IN NUMBER) IS
          SELECT *
          FROM dba_audit_trail
          WHERE sessionid = AUDSID
    BEGIN
       IF (USER = 'SYSTEM' OR USER = 'SYS') THEN
          -- Ignore this error
          NULL;
       ELSIF IS_SERVERERROR (1034) THEN
          -- Ignore this error
          NULL;
       ELSE
          -- get the sid
          OPEN sid_cur;
          FETCH sid_cur INTO sid_name;
          CLOSE sid_cur;
          -- get the location of the alert log
          OPEN bdump_cur;
          FETCH bdump_cur INTO bdump_dest;
          CLOSE bdump_cur;
          -- get the session information
          OPEN session_cur;
          FETCH session_cur INTO session_rec;
          CLOSE session_cur;
          -- get the audit_trail information if it exists
          OPEN audit_trail_cur(session_rec.audsid);
          FETCH audit_trail_cur INTO audit_rec;
          auditing := audit_trail_cur%FOUND;
          CLOSE audit_trail_cur;
          IF session_rec.program = 'MyProgram.exe' THEN
             NULL;  -- ignore actions from MyProgram - that's where I do maintenance
          ELSE
             -- compose the message
             msg := 'Subject: Oracle error '||' on '||sid_name||crlf;
             msg := msg||'To: '||recipient_address||crlf;
             msg := msg||'For more information see the alert log file located at:'||crlf;
             msg := msg||bdump_dest||'/alert_'||sid_name||'.log'||crlf;
             msg := msg||'or the error log file: $'||log_file_dir||'/'||log_file_name||crlf;
             msg := msg||'Error Time='||TO_CHAR(SYSDATE,'DD-Mon-YYYY HH24:MI:SS')||crlf;
             msg := msg||DBMS_UTILITY.FORMAT_CALL_STACK||crlf;
             LinesOfSQL := sql_txt(offending_sql);
             msg := msg||'Offending SQL is:'||crlf;
             FOR loop_counter IN offending_sql.FIRST..offending_sql.LAST
             LOOP
                msg := msg||offending_sql(loop_counter);
             END LOOP;
             msg := msg||crlf||'----- PL/SQL Error Stack -----'||crlf;
             msg := msg||DBMS_UTILITY.FORMAT_ERROR_STACK||crlf;
             msg := msg||'V$SESSION.SADDR='   ||session_rec.saddr   ||crlf;
             msg := msg||'V$SESSION.SID='     ||session_rec.sid     ||crlf;
             msg := msg||'V$SESSION.SERIAL#=' ||session_rec.serial# ||crlf;
             msg := msg||'V$SESSION.AUDSID='  ||session_rec.audsid  ||crlf;
             msg := msg||'V$SESSION.PADDR='   ||session_rec.paddr   ||crlf;
             msg := msg||'V$SESSION.USER#='   ||session_rec.user#   ||crlf;
             msg := msg||'V$SESSION.USERNAME='||session_rec.username||crlf;
             msg := msg||'V$SESSION.COMMAND=' ||session_rec.command ||crlf;
             msg := msg||'V$SESSION.OWNERID=' ||session_rec.ownerid ||crlf;
             msg := msg||'V$SESSION.TADDR='   ||NVL(session_rec.taddr   ,'Null')||crlf;
             msg := msg||'V$SESSION.LOCKWAIT='||NVL(session_rec.lockwait,'Null')||crlf;
             msg := msg||'V$SESSION.STATUS='  ||NVL(session_rec.status  ,'Null')||crlf;
             msg := msg||'V$SESSION.SERVER='  ||NVL(session_rec.server  ,'Null')||crlf;
             msg := msg||'V$SESSION.SCHEMA#=' ||session_rec.schema#||crlf;
             msg := msg||'V$SESSION.SCHEMANAME=' ||NVL(session_rec.schemaname,'Null')||crlf;
             msg := msg||'V$SESSION.OSUSER='     ||NVL(session_rec.osuser    ,'Null')||crlf;
             msg := msg||'V$SESSION.PROCESS='    ||NVL(session_rec.process   ,'Null')||crlf;
             msg := msg||'V$SESSION.MACHINE='    ||NVL(session_rec.machine   ,'Null')||crlf;
             msg := msg||'V$SESSION.TERMINAL='   ||NVL(session_rec.terminal  ,'Null')||crlf;
             msg := msg||'V$SESSION.PROGRAM='    ||NVL(session_rec.program   ,'Null')||crlf;
             msg := msg||'V$SESSION.TYPE='       ||NVL(session_rec.type      ,'Null')||crlf;
             msg := msg||'V$SESSION.SQL_ADDRESS='    ||session_rec.sql_address  ||crlf;
             msg := msg||'V$SESSION.SQL_HASH_VALUE=' ||NVL(TO_CHAR(session_rec.sql_hash_value) ,'Null')||crlf;
             msg := msg||'V$SESSION.PREV_SQL_ADDR='  ||session_rec.prev_sql_addr||crlf;
             msg := msg||'V$SESSION.PREV_HASH_VALUE='||NVL(TO_CHAR(session_rec.prev_hash_value),'Null')||crlf;
             msg := msg||'V$SESSION.MODULE='     ||NVL(session_rec.module              ,'Null')||crlf;
             msg := msg||'V$SESSION.MODULE_HASH='||NVL(TO_CHAR(session_rec.module_hash),'Null')||crlf;
             msg := msg||'V$SESSION.ACTION='     ||NVL(session_rec.action              ,'Null')||crlf;
             msg := msg||'V$SESSION.ACTION_HASH='||NVL(TO_CHAR(session_rec.action_hash),'Null')||crlf;
             msg := msg||'V$SESSION.CLIENT_INFO='||NVL(session_rec.client_info         ,'Null')||crlf;
             msg := msg||'V$SESSION.FIXED_TABLE_SEQUENCE='||NVL(TO_CHAR(session_rec.fixed_table_sequence),'Null')||crlf;
             msg := msg||'V$SESSION.ROW_WAIT_OBJ#='  ||NVL(TO_CHAR(session_rec.row_wait_obj#)  ,'Null')||crlf;
             msg := msg||'V$SESSION.ROW_WAIT_FILE#=' ||NVL(TO_CHAR(session_rec.row_wait_file#) ,'Null')||crlf;
             msg := msg||'V$SESSION.ROW_WAIT_BLOCK#='||NVL(TO_CHAR(session_rec.row_wait_block#),'Null')||crlf;
             msg := msg||'V$SESSION.ROW_WAIT_ROW#='  ||NVL(TO_CHAR(session_rec.row_wait_row#)  ,'Null')||crlf;
             msg := msg||'V$SESSION.LOGON_TIME='     ||NVL(TO_CHAR(session_rec.logon_time,'DD-Mon-YYYY HH24:MI:SS'),'Null')||crlf;
             msg := msg||'V$SESSION.LAST_CALL_ET='   ||NVL(TO_CHAR(session_rec.last_call_et)   ,'Null')||crlf;
             msg := msg||'V$SESSION.PDML_ENABLED='   ||NVL(session_rec.pdml_enabled   ,'Null')||crlf;
             msg := msg||'V$SESSION.FAILOVER_TYPE='  ||NVL(session_rec.failover_type  ,'Null')||crlf;
             msg := msg||'V$SESSION.FAILOVER_METHOD='||NVL(session_rec.failover_method,'Null')||crlf;
             msg := msg||'V$SESSION.FAILED_OVER='    ||NVL(session_rec.failed_over    ,'Null')||crlf;
             msg := msg||'V$SESSION.RESOURCE_CONSUMER_GROUP='||NVL(session_rec.resource_consumer_group,'Null')||crlf;
             msg := msg||'V$SESSION.PDML_STATUS='    ||NVL(session_rec.pdml_status    ,'Null')||crlf;
             msg := msg||'V$SESSION.PDDL_STATUS='    ||NVL(session_rec.pddl_status    ,'Null')||crlf;
             msg := msg||'V$SESSION.PQ_STATUS='      ||NVL(session_rec.pq_status      ,'Null')||crlf;
             IF auditing THEN
                msg := msg||'DBA_AUDIT_TRAIL.OS_USERNAME='  ||NVL(audit_rec.os_username,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.USERNAME='     ||NVL(audit_rec.username   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.USERHOST='     ||NVL(audit_rec.userhost   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.TERMINAL='     ||NVL(audit_rec.terminal   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.TIMESTAMP='    ||TO_CHAR(audit_rec.timestamp,'DD-Mon-YYYY HH24:MI:SS')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.OWNER='        ||NVL(audit_rec.owner      ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.OBJ_NAME='     ||NVL(audit_rec.obj_name   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.ACTION='       ||audit_rec.action   ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.ACTION_NAME='  ||NVL(audit_rec.action_name   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.NEW_OWNER='    ||NVL(audit_rec.new_owner     ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.NEW_NAME='     ||NVL(audit_rec.new_name      ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.OBJ_PRIVILEGE='||NVL(audit_rec.obj_privilege ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.SYS_PRIVILEGE='||NVL(audit_rec.sys_privilege ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.ADMIN_OPTION=' ||NVL(audit_rec.admin_option  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.GRANTEE='      ||NVL(audit_rec.grantee       ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.AUDIT_OPTION=' ||NVL(audit_rec.audit_option  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.SES_ACTIONS='  ||NVL(audit_rec.ses_actions   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_TIME='  ||NVL(TO_CHAR(audit_rec.logoff_time)  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LREAD=' ||NVL(TO_CHAR(audit_rec.logoff_lread) ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_PREAD=' ||NVL(TO_CHAR(audit_rec.logoff_pread) ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LWRITE='||NVL(TO_CHAR(audit_rec.logoff_lwrite),'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_DLOCK=' ||NVL(audit_rec.logoff_dlock  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.COMMENT_TEXT=' ||NVL(audit_rec.comment_text  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.SESSIONID='    ||audit_rec.sessionid   ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.ENTRYID='      ||audit_rec.entryid     ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.STATEMENTID='  ||audit_rec.statementid ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.RETURNCODE='   ||audit_rec.returncode  ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.PRIV_USED='    ||NVL(audit_rec.priv_used,'Null')||crlf;
             END IF;
             msg := msg||'-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'||crlf||crlf;
             -- write the message to the error log file
             log_file_handle := UTL_FILE.FOPEN (log_file_dir, log_file_name, 'A',maxlinesize);
             UTL_FILE.PUT_LINE(log_file_handle,msg);
             UTL_FILE.FCLOSE(log_file_handle);
             -- send the message by Email
             mail_conn := UTL_SMTP.open_connection(smtp_relay, mail_port);
             UTL_SMTP.HELO(mail_conn, smtp_relay);
             UTL_SMTP.MAIL(mail_conn, sender_address);
             UTL_SMTP.RCPT(mail_conn, recipient_address);
             UTL_SMTP.DATA(mail_conn, msg);
             UTL_SMTP.QUIT(mail_conn);
          END IF; -- client_program = MyProgram.exe
       END IF;
    END;
    /

  • Send PO Mail with PDF File that Chinese character doestn't display

    Send PO Mail with PDF File that Chinese character doestn't display.
    I am using RSTXPDFT4, unicode ECC6.0
    Some computer Adobe Reader can read the file, but some computer cannot read, just a blank page.
    Thanks.

    Hi
    I worked for one client-chinese where we have to print chinese & english ( bilingual).You need to have dricer program which could identify both scripts .You are right ( unicode0
    Please check for the driver program : TWPDF : PDF converter Chinese in SPAD setting.
    SAP note is available.I will check and let you update .
    Edited by: sunny on Oct 28, 2009 10:29 AM

  • Send External mail with Attchment from SAP

    Hi All,
    OUR REQUIREMENT: We need to send EXTERNAL MAIL with ATTACHMENT(Excel) form SAP .
    We have developed a function module which converts the internal table data into Excel Format and sends it as an attachment to External Mail.
    ISSUE : But our issue is we are unable to open that document using GOOGLE DOCS Could any one help me how to do this.
    it was thriughing error like
    Error log is .
    ''Sorry, we are unable to generate a view of the document at this time. Please try again later.
    You can also try to download the original document by clicking here. Alternatively, you can view the plain HTML (automatically redirecting).
    Regards
    Venkat .
    Edited by: venkata pradeep on Mar 5, 2012 10:26 AM
    Edited by: venkata pradeep on Mar 5, 2012 10:28 AM

    Is the excel file recognized by MS Excel? If not, then issue is you have wrongly converted your attachment and/or your FM to create an excel file was wrongly coded or you have passed it wrongly to your mail code.
    If you consider an OOP approach in sending external mail, refer to this link:
    http://wiki.sdn.sap.com/wiki/display/Snippets/SendingmailwithattachmentusingObjectOriented+Approach

  • Sending E-mail with attachment within a loop not working.

    Hi,
    I'm trying to send e-mails with attachment to multiple users with "subject & an attachment" within an ITAB loop.
    SUBJECT for each mail to corresponding user is being sent properly.
    But ATTACHMENT contents are not being sent properly.
    1st ATTACHMENT contents are going to 2nd user(supposed to go to 1st user) & 2nd ATTACHMENT contents are going to 3rd user etc..
    in almost all attempts, last ATTACHMENT contents within the loop were delivered properly to the last user.
    As a test, I'm debugging by sending with same "SUBJECT" & "ATTACHMENT CONTENTS". still it's not working.
    Following is the code for sending mail with same "SUBJECT" & "ATTACHMENT CONTENTS".
    I even refreshed the file contents for each record within the ITAB. Greatly appreciate any help.
    assume that ITAB has a field GROUP with values 501, 502, 503 & 504.
    SUBJECT is the subject of e-mail & DIST_LIST is the e-mail id of the corresponding user.
    DATA:
        MAIL_FILE(20) TYPE C,
        MAIL_TEXT(200) TYPE C,
        COMMAND(512) TYPE C,
        DIST_LIST(425) TYPE C,
        SUBJECT(60) TYPE C.
    DATA: BEGIN OF ITAB  OCCURS 0.
            DATA GROUP LIKE /BI0/PGRP-GRP.
    DATA: END OF ITAB.
    LOOP AT ITAB.
    SUBJECT = ITAB-GROUP.
    IF ITAB-GROUP = '501'.
    DIST_LIST = '[email protected]'.
    ENDIF.
    IF ITAB-GROUP = '502'.
    DIST_LIST = '[email protected]'.
    ENDIF.
    IF ITAB-GROUP = '503'.
    DIST_LIST = '[email protected]'.
    ENDIF.
    IF ITAB-GROUP = '504'.
    DIST_LIST = '[email protected]'.
    ENDIF.
    clear MAIL_FILE.
    clear MAIL_TEXT.
    UNASSIGN <FILE1>.
    CONCATENATE '/tmp/' SY-UNAME '.txt' INTO MAIL_FILE.
    TRANSLATE MAIL_FILE TO LOWER CASE.
    OPEN DATASET MAIL_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      MAIL_TEXT = ITAB-GROUP.
      TRANSFER MAIL_TEXT TO MAIL_FILE LENGTH 200.
    CLOSE DATASET MAIL_FILE.
    clear MAIL_TEXT.
      CONCATENATE '< ' MAIL_FILE INTO MAIL_TEXT SEPARATED BY SPACE.
      ASSIGN MAIL_TEXT TO <FILE1>.
    *Create UNIX MAIL Command
      CONCATENATE 'mailx -s'
      '"' SUBJECT '"' '"'  DIST_LIST  '"' <FILE1>
        INTO COMMAND SEPARATED BY SPACE.
    Send the E-mail
      CALL FUNCTION 'RFC_REMOTE_EXEC'
        DESTINATION 'SERVER_EXEC'
        EXPORTING
          COMMAND = COMMAND
        EXCEPTIONS
          OTHERS  = 04.
    ENDLOOP.

    Hi Zhenglin,
    thanks for your reply.
    Now, it's working after I changed attachment file name (user name) with ITAB-GROUP.
    but, I'm not clear on why it was not working even if the file name is same in every loop, as I'm unassigning the file contents and loading new contents at the start of each loop.
    anyhow, it's working and many thanks for your help.

  • RE: (forte-users) send/receive mail

    Hi Nat,
    you have three possibilities to integrate MAPI to a Forte program:
    1. using mapi32.dll (simple MAPI) or mapix32.dll (MAPI). You must integrate
    this libraries using a C wrapper class (as described in "Integrating with
    External Systems").
    2. using OLE Active messaging library ( as described in 'Integrating with
    Windows and Macintosh")
    3. or implement POP3 using an ExternalConnection class.
    Regards,
    Zenon Adamek
    Forte Developer
    Purolator Courier Ltd.
    ZAdamekpurolator.com
    -----Original Message-----
    From: Nat Balasubramaniam [SMTP:NBalasubdcjs.state.ny.us]
    Sent: Wednesday, January 26, 2000 2:18 PM
    To: Forte-userssagesoln.com
    Subject: (forte-users) send/receive mail
    Our application needs to send/receive mails from a mail server in NT
    environment. Does forte provide SMTP and POP3 protocol support(libraries)
    so that we can use external connection class to connect to the server and
    send/
    receive mails or do we have to use third party controls. Any help would be
    appreciated.
    For the archives, go to: <a href="http://lists.xpedior.com/forte-users">http://lists.xpedior.com/forte-users</a> and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

    Hi,
    Unfortunatly, Forte does not provide SMTP and POP3 protocoles.
    But, you can use External connections to do it if you need.
    You can find a simple SMTP send mail sample code on
    http://perso.club-internet.fr/dnguyen/ . The receive should be as easy as the send.
    For MIME base 64 encoding and decoding, it should last one or two weeks of coding
    (if you need optimization).
    One advantage of coding this in Tool directly is the portability.
    In your case, on NT, you could also interface with MAPI using for instance the
    ActiveX interface.
    By that way, you will already have SMTP, POP3 and MIME.
    Hope this helps,
    Daniel Nguyen
    Freelance Forte Consultant
    http://perso.club-internet.fr/dnguyen/
    edwardsmjwillis.com a &eacute;crit:
    Hi,
    Our Forte development team are currently investigating how we can add internet
    mail capabilities to a Forte application. Our application needs to send/receive
    mails from a mail server in an NT environment. Does forte provide SMTP and POP3
    protocol support (libraries) so that we can use external connection class to
    connect to the server and send/ receive mails or do we have to use third party
    controls ?.
    Any help regarding code examples or third party solutions would be appreciated.
    Thanks in advance
    Mark J Edwards
    Senior Technical Specialist
    Willis
    Email: edwardsmjwillis.com
    The information in this email and in any attachments is confidential and may be
    privileged. If you are not the intended recipient, please destroy this message,
    delete any copies held on your systems and notify the sender immediately. You
    should not retain, copy or use this email for any purpose, nor disclose all or
    any part of its content to any other person.
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

  • How to send a mail with rich text content like using outlook

    Hi All. I have a serious problem. When we send the mail from
    outlook express or yahoo, we can send the mail with the text appearing
    in the mail with bold font , with different colors, underlined etc.
    If i type this kind of text in any word processor and mail that content through java mail then the message should be received by the recepient with all that bold,color and underlines etc as it is. Can anybody please help me in this case ASAP.

    Go to this site and download the htmlArea Javascripts. Embedd them in your HTML and it will turn your normal HTML Text Area into Rich Text Area. Your real code will include all HTML tags. For example if you select some text and make it bold , the real HTML output will look like <B>YOUR TEXT </B>. So i guess your recipient should be able to receive HTML contents.
    http://www.interactivetools.com/products/htmlarea/

  • How to send a mail with PDF attachment

    Hello
    Good Day!
    We have a requirement to send the mail with pdf attachment. Pdf file will be remain same for all mails and it will be placed at server. We are on R12.4 and below is the database information :
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    CORE 11.2.0.3.0 Production
    TNS for Linux: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production
    Thanks a ton for your anticipated help!
    Thanks
    Gaurav

    The word URGENT is considered as rude in this forum.. Nobody here is getting paid for the ansers they are giving..
    Just have a look at These threads.Those will help you.

  • How to send a mail with HTML body from Oracle

    Hi Team,
    Can somebody guide me how to send a mail with HTML body from oracle.
    Here is the piece of code i am trying to send a mail.
    procedure SEND_MAIL is
    cursor c_1 is select * from table_name;
    l_mail_id varchar2(40);
    -- ls_mailhost VARCHAR2(64) := Mailhost;
    ls_from VARCHAR2(64) := ‘[email protected]
    ls_subject VARCHAR2(200);
    ls_to VARCHAR2(64);
    l_mail_conn UTL_SMTP.connection;
    ls_left_menu_name VARCHAR2(64);
    ll_emp_num number(8);
    begin
    for i in c_1 loop
    begin
    l_mail_conn := UTL_SMTP.OPEN_CONNECTION('IP');
    UTL_SMTP.HELO(l_mail_conn, 'IP');
    UTL_SMTP.MAIL(l_mail_conn, LS_FROM);
    UTL_SMTP.RCPT(L_mail_conn, LS_TO);
    UTL_SMTP.DATA(l_mail_conn,'From: ' ||ls_from || utl_tcp.crlf ||
    'To: ' ||ls_to || utl_tcp.crlf ||
    'Subject: ' ||ls_subject|| utl_tcp.crlf);
    UTL_SMTP.QUIT(l_mail_conn);
    exception
    when no_data_found then
    null;
    when others then
    RAISE_APPLICATION_ERROR(-20000, 'Failed to send mail due to the following error: ' || sqlerrm);
    end;
    end loop;
    end;
    Thnx

    Hi Nicolas!
    Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
    If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
    SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
    Hope this helps!
    Regards
    Geir

  • How to send HTML mail with images multipart/related message

    Hi,
    Could any body tell me how to send HTML mail with images in "multipart/related" message,if any body can give the code ,it would be helpful.
    Thanks

    Hi,
    Could any body tell me how to send HTML mail with
    ith images in "multipart/related" message,if any body
    can give the code ,it would be helpful.
    ThanksHi!
    Refer to
    http://developer.java.sun.com/developer/onlineTraining/JavaMail/index.html
    I've found it very helpful.
    Look at the last part for a code showing how to send HTML mail!
    Regards

  • How to send e-mails with attachments using microsoft exchange servers?

    I was wondering if there was a way to send e-mails with attached data files.  The e-mail server utilizes a Microsoft Exchange Server.  I would appreciate any help that is provided.

    What version and type of development system of LabVIEW do you have. You have the SMTP Email Send File and SMTP Email Send Multiple Attachments in all except the base package.

  • We want to send a mail with attachment pdf file.

    Hi!!!
    We want to send a mail with attachment pdf file.
    The PDF file this is in the server sap.

    Hi,
    Pls check web logs like
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    Eddy
    PS.
    Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
    Spread the wor(l)d!

  • Send a mail with attached file .xls but i got file without

    i tried to send a mail with attached file .xls. but i am able to send the file , we recived the file without file name. please do the same
    thnaks in advance.
    END-OF-SELECTION.
    Populate message body text
    PERFORM POPULATE_EMAIL_MESSAGE_BODY.
    Send file by email as .xls speadsheet
    PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
    TABLES IT_MESSAGE
    IT_ATTACH
    USING P_EMAIL
    'Example .xls documnet attachment'
    'XLS'
    'filename'
    CHANGING GD_ERROR
    GD_RECIEVER.
    Instructs mail send program for SAPCONNECT to send email(rsconn01)
    PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
    *& Form DATA_RETRIEVAL
    Retrieve data form EKPO table and populate itab it_ekko
    FORM DATA_RETRIEVAL.
    SELECT EBELN EBELP AEDAT MATNR
    UP TO 10 ROWS
    FROM EKPO
    INTO TABLE IT_EKPO.
    ENDFORM. " DATA_RETRIEVAL
    *& Form BUILD_XLS_DATA_TABLE
    Build data table for .xls document
    FORM BUILD_XLS_DATA_TABLE.
    CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
    CON_TAB TYPE X VALUE '09'. "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    *constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF.
    CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
    INTO IT_ATTACH SEPARATED BY ''.
    CONCATENATE '' IT_ATTACH INTO IT_ATTACH.
    APPEND IT_ATTACH.
    LOOP AT IT_EKPO INTO WA_CHAREKPO.
    CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
    WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
    INTO IT_ATTACH SEPARATED BY ''.
    CONCATENATE '' IT_ATTACH INTO IT_ATTACH.
    APPEND IT_ATTACH.
    ENDLOOP.
    ENDFORM. " BUILD_XLS_DATA_TABLE
    *& Form SEND_FILE_AS_EMAIL_ATTACHMENT
    Send email
    FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
    PIT_ATTACH
    USING P_EMAIL
    P_MTITLE
    P_FORMAT
    P_FILENAME
    P_ATTDESCRIPTION
    P_SENDER_ADDRESS
    P_SENDER_ADDRES_TYPE
    CHANGING P_ERROR
    P_RECIEVER.
    DATA: LD_ERROR TYPE SY-SUBRC,
    LD_RECIEVER TYPE SY-SUBRC,
    LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
    LD_EMAIL LIKE SOMLRECI1-RECEIVER,
    LD_FORMAT TYPE SO_OBJ_TP ,
    LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
    LD_ATTFILENAME TYPE SO_OBJ_DES ,
    LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
    LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
    LD_RECEIVER LIKE SY-SUBRC.
    LD_EMAIL = P_EMAIL.
    LD_MTITLE = P_MTITLE.
    LD_FORMAT = P_FORMAT.
    LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
    LD_ATTFILENAME = P_FILENAME.
    LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
    LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
    Fill the document data.
    W_DOC_DATA-DOC_SIZE = 1.
    Populate the subject/generic message attributes
    W_DOC_DATA-OBJ_LANGU = SY-LANGU.
    W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
    W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
    W_DOC_DATA-SENSITIVTY = 'F'.
    Fill the document data and get size of attachment
    CLEAR W_DOC_DATA.
    READ TABLE IT_ATTACH INDEX W_CNT.
    W_DOC_DATA-DOC_SIZE =
    ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
    W_DOC_DATA-OBJ_LANGU = SY-LANGU.
    W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
    W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
    W_DOC_DATA-SENSITIVTY = 'F'.
    CLEAR T_ATTACHMENT.
    REFRESH T_ATTACHMENT.
    T_ATTACHMENT[] = PIT_ATTACH[].
    Describe the body of the message
    CLEAR T_PACKING_LIST.
    REFRESH T_PACKING_LIST.
    T_PACKING_LIST-TRANSF_BIN = SPACE.
    T_PACKING_LIST-HEAD_START = 1.
    T_PACKING_LIST-HEAD_NUM = 0.
    T_PACKING_LIST-BODY_START = 1.
    DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
    T_PACKING_LIST-DOC_TYPE = 'RAW'.
    APPEND T_PACKING_LIST.
    Create attachment notification
    T_PACKING_LIST-TRANSF_BIN = 'X'.
    T_PACKING_LIST-HEAD_START = 1.
    T_PACKING_LIST-HEAD_NUM = 1.
    T_PACKING_LIST-BODY_START = 1.
    DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
    T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
    T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
    T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
    T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
    APPEND T_PACKING_LIST.
    Add the recipients email address
    CLEAR T_RECEIVERS.
    REFRESH T_RECEIVERS.
    T_RECEIVERS-RECEIVER = LD_EMAIL.
    T_RECEIVERS-REC_TYPE = 'U'.
    T_RECEIVERS-COM_TYPE = 'INT'.
    T_RECEIVERS-NOTIF_DEL = 'X'.
    T_RECEIVERS-NOTIF_NDEL = 'X'.
    APPEND T_RECEIVERS.
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
    DOCUMENT_DATA = W_DOC_DATA
    PUT_IN_OUTBOX = 'X'
    SENDER_ADDRESS = LD_SENDER_ADDRESS
    SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
    COMMIT_WORK = 'X'
    IMPORTING
    SENT_TO_ALL = W_SENT_ALL
    TABLES
    PACKING_LIST = T_PACKING_LIST
    CONTENTS_BIN = T_ATTACHMENT
    CONTENTS_TXT = IT_MESSAGE
    RECEIVERS = T_RECEIVERS
    EXCEPTIONS
    TOO_MANY_RECEIVERS = 1
    DOCUMENT_NOT_SENT = 2
    DOCUMENT_TYPE_NOT_EXIST = 3
    OPERATION_NO_AUTHORIZATION = 4
    PARAMETER_ERROR = 5
    X_ERROR = 6
    ENQUEUE_ERROR = 7
    OTHERS = 8.
    Populate zerror return code
    LD_ERROR = SY-SUBRC.
    Populate zreceiver return code
    LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
    ENDLOOP.
    ENDFORM.
    *& Form INITIATE_MAIL_EXECUTE_PROGRAM
    Instructs mail send program for SAPCONNECT to send email.
    FORM INITIATE_MAIL_EXECUTE_PROGRAM.
    WAIT UP TO 2 SECONDS.
    SUBMIT RSCONN01 WITH MODE = 'INT'
    WITH OUTPUT = 'X'
    AND RETURN.
    ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
    *& Form POPULATE_EMAIL_MESSAGE_BODY
    Populate message body text
    FORM POPULATE_EMAIL_MESSAGE_BODY.
    REFRESH IT_MESSAGE.
    IT_MESSAGE = 'Please find attached a list test ekpo records'.
    APPEND IT_MESSAGE.
    ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY

    PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
      TABLES IT_MESSAGE
      IT_ATTACH
      USING P_EMAIL
      'Failed IDOC Analysis report'(020)
      'xls'(021)
      'IDOC_REP'(022)
      CHANGING GD_ERROR
      GD_RECIEVER.
    Instructs mail send program for SAPCONNECT to send email(rsconn01)
      PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
    ENDFORM.                    " F_MAIL
    *& Form BUILD_XLS_DATA_TABLE
    Build data table for .xls document
    FORM BUILD_XLS_DATA_TABLE.
    *CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
    *CON_TAB TYPE X VALUE '09'. "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
      constants:
       con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
       con_cret type c value cl_abap_char_utilities=>CR_LF.
      CONCATENATE text-040 text-041 text-042 text-043 text-044 text-045 text-046 text-047 text-048 text-049
      INTO IT_ATTACH SEPARATED BY con_tab.
      CONCATENATE con_cret IT_ATTACH INTO IT_ATTACH.
      APPEND IT_ATTACH.
      clear IT_ATTACH.
      loop at i_final_t into w_final.
        CONCATENATE
        w_final-mestyp w_final-docnum  w_final-statxt w_final-msgno w_final-rvplant w_final-kunnr w_final-vbeln w_final-credat
                w_final-cretim w_final-flag INTO IT_ATTACH SEPARATED BY con_tab.
        CONCATENATE con_cret IT_ATTACH INTO IT_ATTACH.
        APPEND IT_ATTACH.
        clear IT_attach.
      endloop.
    ENDFORM. " BUILD_XLS_DATA_TABLE
    *& Form SEND_FILE_AS_EMAIL_ATTACHMENT
    Send email
    FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
    PIT_ATTACH
    USING P_EMAIL
    P_MTITLE
    P_FORMAT
    P_FILENAME
    P_ATTDESCRIPTION
    P_SENDER_ADDRESS
    P_SENDER_ADDRES_TYPE
    CHANGING P_ERROR
    P_RECIEVER.
      DATA: LD_ERROR TYPE SY-SUBRC,
      LD_RECIEVER TYPE SY-SUBRC,
      LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
      LD_EMAIL LIKE SOMLRECI1-RECEIVER,
      LD_FORMAT TYPE SO_OBJ_TP ,
      LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
      LD_ATTFILENAME TYPE SO_OBJ_DES ,
      LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
      LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
      LD_RECEIVER LIKE SY-SUBRC.
      LD_EMAIL = P_EMAIL.
      LD_MTITLE = P_MTITLE.
      LD_FORMAT = P_FORMAT.
      LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
      LD_ATTFILENAME = P_FILENAME.
      LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
      LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
    Fill the document data.
      W_DOC_DATA-DOC_SIZE = 1.
    Populate the subject/generic message attributes
      W_DOC_DATA-OBJ_LANGU = SY-LANGU.
      W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
      W_DOC_DATA-SENSITIVTY = 'F'.
    Fill the document data and get size of attachment
      CLEAR W_DOC_DATA.
      READ TABLE IT_ATTACH INDEX W_CNT.
      W_DOC_DATA-DOC_SIZE =
      ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
      W_DOC_DATA-OBJ_LANGU = SY-LANGU.
      W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
      W_DOC_DATA-SENSITIVTY = 'F'.
      CLEAR T_ATTACHMENT.
      REFRESH T_ATTACHMENT.
      T_ATTACHMENT[] = PIT_ATTACH[].
    Describe the body of the message
      CLEAR T_PACKING_LIST.
      REFRESH T_PACKING_LIST.
      T_PACKING_LIST-TRANSF_BIN = SPACE.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM = 0.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE = 'RAW'.
      APPEND T_PACKING_LIST.
    Create attachment notification
      T_PACKING_LIST-TRANSF_BIN = 'X'.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM = 1.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
      T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
      T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
      T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
      APPEND T_PACKING_LIST.
    Add the recipients email address
      CLEAR T_RECEIVERS.
      REFRESH T_RECEIVERS.
      T_RECEIVERS-RECEIVER = LD_EMAIL.
      T_RECEIVERS-REC_TYPE = 'U'.
      T_RECEIVERS-COM_TYPE = 'INT'.
      T_RECEIVERS-NOTIF_DEL = 'X'.
      T_RECEIVERS-NOTIF_NDEL = 'X'.
      APPEND T_RECEIVERS.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          DOCUMENT_DATA              = W_DOC_DATA
          PUT_IN_OUTBOX              = 'X'
          SENDER_ADDRESS             = LD_SENDER_ADDRESS
          SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
          COMMIT_WORK                = 'X'
        IMPORTING
          SENT_TO_ALL                = W_SENT_ALL
        TABLES
          PACKING_LIST               = T_PACKING_LIST
          CONTENTS_BIN               = T_ATTACHMENT
          CONTENTS_TXT               = IT_MESSAGE
          RECEIVERS                  = T_RECEIVERS
        EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.
    Populate zerror return code
      LD_ERROR = SY-SUBRC.
    Populate zreceiver return code
      LOOP AT T_RECEIVERS.
        LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
      ENDLOOP.
    ENDFORM.                    "SEND_FILE_AS_EMAIL_ATTACHMENT
    *& Form INITIATE_MAIL_EXECUTE_PROGRAM
    Instructs mail send program for SAPCONNECT to send email.
    FORM INITIATE_MAIL_EXECUTE_PROGRAM.
      WAIT UP TO 2 SECONDS.
      SUBMIT RSCONN01 WITH MODE = 'INT'
      WITH OUTPUT = 'X'
      AND RETURN.
    ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
    *& Form POPULATE_EMAIL_MESSAGE_BODY
    Populate message body text
    FORM POPULATE_EMAIL_MESSAGE_BODY.
      data: l1(99)    type c,
             l2(15)    type c,
             lt_message         type standard table of solisti1,
             ls_message      like line of lt_message.
      clear ls_message.
      l1 = 'Dear'(007).
      l2 =  'Sir/Madam'(008).
      concatenate l1 l2 ',' into
      ls_message-line separated by space.
      append ls_message to lt_message.
    *insert Blank Line
      clear ls_message.
      ls_message-line = space.
      append ls_message to lt_message.
    *Assign Message text
      clear ls_message.
      concatenate text-011
                  text-012
                  into ls_message-line separated by space.
      append ls_message to lt_message.
    *insert Blank Line
      clear ls_message.
      ls_message-line = space.
      append ls_message to lt_message.
    *Assign Message text
      clear ls_message.
      concatenate text-013
                  text-014
                  text-015
                  into ls_message-line separated by space.
      append ls_message to lt_message.
      concatenate text-016
                  text-017
                  into ls_message-line separated by space.
      append ls_message to lt_message.
    *insert Blank Line
      clear ls_message.
      ls_message-line = space.
      append ls_message to lt_message.
      ls_message-line = text-018.
      append ls_message to lt_message.
      ls_message-line = text-019.
      append ls_message to lt_message.
      clear: ls_message.
      REFRESH IT_MESSAGE.
      it_message[] = lt_message[].
      APPEND IT_MESSAGE.
    ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY

Maybe you are looking for

  • How do I use MenuBarFilter and MagicMenu together?

    I have MenuBarFilter (http://eece.github.com/MenuBarFilter/) and MagicMenu (http://www.cynosurex.com/Software/MagicMenu/), and they seem unable to work together. Sometimes, the bar will be clack, or clear with unaccesibillity, or MagicMenu will work

  • U201CValid Tou201D date set before the date that the report is run u2013 print u201Cnullu201D.

    Hi Experts I had a requirement for  the Query, when we executing the through slection screen we will be giving 0fiscyear "from and to" dates. the "Valid to" (0date)  has to check the relation of the Client partner and contract of relationship, if it

  • [Solved]Can't load mysql after long time of idle

    Phpmyadmin: #2002 Cannot log in to the MySQL server /etc/rc.d/mysqld restart :: Stopping MySQL Server [FAIL] :: Starting MySQL Server [FAIL] Did everything in archwiki. Webmin used to write: SQL select * from tables_priv order by table_name failed :

  • This is related to Hyperion foundation services

    How many foundation services we can maintain using one license server in 9.2 version of hyperion How many planning servers we can maintain using one license server in 9.2 version of Hyperion

  • MacBook pro not working properly - it was fine yesterday

    oolder MacBook pro with Yosemite was working fine yesterday. today it is not.  It takes ages t boot, once booted most apps don't work - I can't even open App Store or about this Mac. About the only thing that works is Firefox. Also doesn't recognise