Internet connectivity using E51 modem through USB

Dear ALL,
I have been using my E51 as a modem for my laptop. After 2 days of usage the USB driver reinstalled automatically. After then I couldn't use the phone to browse the net. Whenever, I try to establish the connection the program says connection could not be established as another program is accessing or the modem is not configured properly.
After, trying lot of stuff. I uninstalled all the nokia programs from my computer.
Yesterday, I downloaded the latest PC Suite 7.1 and installed it. But when i click on the internet it says modem not found. Later, I couldn't find the USB icon at the bottom most toolbar.
The issue with drivers usually come up when the USB is disconnected manually (Usually we have to remove it safely by stoping all programs).
Can NOKIA please help me?

Try going to your pc control panal > add/remove program > look for pc connectivity sollution > change > repair.
you must be logged in with the admin account.
-then try to connect using one touch access from PC Suite again.
Mark me a KUDOS if this has helped...

Similar Messages

  • How to share internet connection from cable modem through built-in airport on imac?

    I have a cable modem with ethernet going into imac. How can I share the internet connection using the iMacs built in airport with other computers that have airport cards?
    I would love to put an ethernet router between the imac and the modem and share the internet connection using the iMacs built in airport with other computers that have airport cards as well.
    Thanks!

    The setup I had working is what I have connected to the internet now. A cable modem with one ethernet jack that plugs into the iMac. The airport from the iMac broadcast to my G5 with an airport card in it and received the internet connection. The PC received it the same way from the iMac but to a Netgear wireless adapter.
    I messed things up recently adding a wired 4 port ethernet router between the iMac and the modem, so that the modem ethernet plugged into the router, and from the router, plugged into the iMac which then could receive the internet but no more airport connections to my other machines. Haven't been able to get it working since.

  • Intermittent dropout of internet connection using cable modem

    Hello all.
    My connection drops out a few times a day. Only for a few seconds, but I suspect it caused problems with downloading a playlist from iTunes today, which is particularly frustrating; and it's unnerving at the best of times. My ISP is not very helpful about this. I know that one possibility is that I'm getting interference from other signals, but I don't know what I can do about that, so I'm wondering if anyone has any suggestions about something I can do from the Mac.
    To clarify:
    The message I get from my email client (Entourage) is CONNECTION TO THE SERVER FAILED OR WAS DROPPED.
    My modem is a D-Link, connected through an ethernet cable.
    Here's hoping! Thanks in advance,
    Roger

    I think your problem is either the ISP or your modem. Try resetting the modem by shutting everything down; modem and Mac for two minutes. Then power up the modem, wait two minutes, then power up the Mac. If the problem persists have your ISP give you a new modem (if renting it from them) or purchase a new one.

  • Unable to maintain internet connection using wireless router

    I posted a bug report with Apple, 7229097. Not sure if anyone has been able to fix this. I tried the suggestions on the board (create location, reboot router, clean install, normal install, delete config etc.) I have narrowed the issue down to my router, which works fine under 10.5.8.
    Summary:
    I have trouble maintaining an internet connection using my Dell TrueMobile 1184 Wireless Broadband Router, model wx-6215D. If I connect directly to my cable modem, I have no internet issues. So, it seems the issue is using the Router, both wireless or using RJ45 cable.
    Steps to reproduce:
    Connect to my wireless router using Airport or RJ45. Browse to a page using Safari or Firefox. First page usually comes up, but is incomplete. Start using refresh or click on more pages, after 1 - 5 refreshes, clicking on links, you get a notice that you are no longer connected to the internet. If you open terminal and execute "dscacheutil -flushcache" you can get your internet back, but will degrade to no internet after 1 - 5 page refreshes.
    Expected result:
    Internet browsing should be fine
    Actual result:
    Internet degrades until browser reports no internet connection.
    Regression:
    Go back to 10.5.8 system and no problem exists. Only happens when you upgrade to 10.6 and 10.6.1.
    Notes:
    I have tried doing the recommended installation, and erasing the hard drive and installing - in both cases I have the same result. Router works fine for PC and 10.5.8. I have since installed 10.6.1 to a USB drive to do any further testing and would appreciate a patch or a timeline for a patch before I move my system to 10.6.1

    I tried adding in the OpenDNS ip 208.67.222.222, 208.67.220.220
    It appears that the router is hijacking DNS calls.
    Funny thing though, DNS is resoving through the router, .2.1
    nslookup apple.com
    ;; reply from unexpected source: 192.168.2.1#53, expected 208.67.222.222#53
    ;; reply from unexpected source: 192.168.2.1#53, expected 208.67.220.220#53
    Server: 192.168.2.1
    Address: 192.168.2.1#53
    Non-authoritative answer:
    Name: apple.com
    Address: 17.251.200.70
    So, the router is giving up the IP address. Also, even though Safari, Firefox and others report no internet, nslookupk continues to work. The router works, but 10.6.1 doesn't seem to like what it gets from the router. Also, not sure a firmware upgrade is required for the router, if there even is one, because it works with both of my PCs and my Mac running 10.5.8.

  • Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) .Using my ipad 3 to an HP air printer.

    Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) using my ipad3 and a HP air printer ?.

    Christina,
    The purpose of the AirPrint system was to permit printing directly from iDevices to printers that are AirPrint enabled without going through an intermediary device.  The catch is the printer must be an AirPrint enabled printer.  The iPad's apps will then recognize the printer and print seamlessly.  Follow the link Demo gave you to see the specifics from HP since that is the printer you asked about using.

  • How to share internet connection using 5G wifi/channel 36~48

    I'm using a 15 inch late 2013 MacBook Pro with retina display running 10.10.1 and iPhone 5S A1530 running iOS 8.1.
    I use an Apple thunderbolt to ethernet adapter at work for internet and it's all cool and fine.
    The problem comes when I try to share the internet connection with my phone through wifi. It's alright if I use channel 1 to 11. But when I try the 5G channels: 36, 40, 44, 48, it just doesn't work. The wifi icon in the top right corner of my screen has a wave animation and then nothing. It just goes back to grey instead of an arrow pointing upwards. In the slimmest hope of a display error, I search nearby wifi signal with my phone and nothing.
    I have a 5G router at home and both my laptop and my phone can connect to its 5G signal. So the hardware should be fine.
    It's weird since it should be working as Apple decided to put an option there for user to choose from all the channels, among which lie the four 5G channels.
    So to conclude, my laptop with a functioning 5G wifi module can share internet connection through 2.4G wifi but not 5G.
    Hope someone could help me with it. Thanks.

    I've turned on NAT and attempted to create a new Subnet using DHCP but it doesn't offer me Airport in the network interface menu (only en0 and fw0). Airport is turned on in network system prefs.
    Have you actually configured the AirPort network with its own IP address settings (in a different subnet from the wired ethernet port)?
    Having the interface enabled isn't enough to make it a viable gateway interface. It needs an IP address/subnet mask too.

  • Can We Send SmS To Any Mobile, Without Using Gsm Modem, Through Oracle

    Can We Send SmS To Any Mobile, Without Using Gsm Modem, Through Oracle ?
    suppose you don't have mobile connected to ur com port.

    is this helps?
    http://inside-apex.blogspot.com/2007/05/sending-sms-to-mobile-phone.html or
    Re: Send Message From Oracle To Mobile Device

  • Trying to share internet connection using Airport Express

    I have an internet connection via a Verizon Wireless broadband card in the Express Card slot in my MacBookPro. I share this connection to my iMac via Airport and I have an Airport Express card connected to a printer & stereo. However, when I establish the Airport internet connection (internet sharing in System prefrences) it establishes a wireless network in the MacBook (I think) as evedinced by the Airport signal (fan) logo changing to a vertical arrow. This precludes connecting to the Airport Express (the Airport Express network is not shown in the Airport pull down menu, only the MacBook network). My question is: can I somehow share the internet connection using the Airport Express network???

    ejagnut, Welcome to the discussion area!
    Configure the AirPort Express (AX) to join the wireless network created by your MacBook Pro. The directions can be found in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

  • Having trouble with internet connections using my Apple G5. Updates turn out to be incompatible with my system. What should I do short of trashing the wonderful computer and spending cash I don't have on a new iMac?

    Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
    Chuck's Dilema

    Hi Chuck,
    TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
    http://www.floodgap.com/software/tenfourfox/
    I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
    SeaMonkey seems pretty fast also, with many options...
    http://www.seamonkey-project.org/
    http://www.seamonkey-project.org/releases/
    Might also look into iCab & OmniWeb versions.
    Also...
    The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
    Texas Mac Man's Flash hack/post...
    https://discussions.apple.com/thread/3599648?tstart=0
    Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
    Might be later ones around also... saw 11.3 I think.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    See in each Browser which version of Flash it thinks it has...
    http://kb2.adobe.com/cps/155/tn_15507.html

  • How to share internet connection using socketserver?

    Hello guys is this possible? i want to share my internet connection programmaticaly using java for example i have a one computer that has internet connection and i want to run socketserver from the computer that has internet connection and share the internet connection to another computer that has no internet connection using socket how to do that in java?

    jhovarie wrote:
    Hello guys is this possible? i want to share my internet connection programmaticaly using java for example i have a one computer that has internet connection and i want to run socketserver from the computer that has internet connection and share the internet connection to another computer that has no internet connection using socket how to do that in java?No, this is mostly a admin (networking ) issue. if you want to do so, you require a router (switch), one end should be connected to internet connection, and then connect the rest of the computers to router. you will be able to access the internet.

  • IPhone 4S only shows up in iTunes when connected to the laptop through USB, even though wifi sync has been enabled

    Why will my 4S only show up in iTunes when it is connected to the laptop through USB? Even though I have ticked the box for the wifi sync and had no problems with it being plugged into the wall and still showed up in iTunes up until a few days ago. Help please !

    Connect your iPhone to your computer and click on it, you should see an option under options for 'sync with this phone over wi-fi' unclick it and it should stop connecting over wifi.

  • Connecting Cable Modem Through USB

    Hello,
    I can't seem to connect my cable modem to my new Macbook. It was previously used on a PC, does this have any bearing on the connectivity now?

    USB is spotty even in PCs and I have seen quite a few unstable connections that were "healed" with an ethernet cable. It really is a far better way to go.
    To go wireless, all you need is a wireless router. You do not need to get an Airport Extreme base station. The AEBS is very easy to setup, but so is a router. It all depends on your level of comfort.
    I have a Netgear WGR614 that cost all of $30 and it works like a charm with my iMac, BlackBook and my 2 PCs.
    If any problems pop up or you just want to make sure of things, be sure to stick around and post. We'd love to see you around.

  • WRT54GS CONNECTION TO MODEM THROUGH USB CABLE WITH AN ETHERNET ADAPTER

    The ethernet port on my motorola surfboard modem is damaged but the usb port is fine.  I am attempting to connect my WRT54GS (ver 6) router to the modem via a usb cable with a male ethernet adapter.  Unfortunately it does not appear that the router is able to accept such an input due to driver or firmware issues.  The modem requires me to set up my pc with another driver specifically for the usb connection when i am connected directly.  Any suggestions?

    Get a new modem, The USB is not meant for that it's meant for wireless network storage.
    GoodLuck
    Matt

  • 5130 cannot get phone connection, using as modem

    Recently purchased 5130 to use as modem for my laptop.  Am using sim card from primary phone to access internet (primary phone has internet service), and connection with USB cable.  Downloaded PC suite, have Vista OS.  Have set specs to phone and internet provider (AT&T) but cannot get connection.  Error display says cannot get phone connection.  Phone works in phone mode, although cannot see contacts.
    ( I have a new bluetooth USB adaptor, but do not want to open package if I can get cable to work.  No point in opening blue tooth yet as cannot even get phone connection.)
    Any advice? 

    Hello, dthurnherr.
    Thank you for visiting Apple Support Communities.
    Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Unable to make or receive FaceTime calls after April 16, 2014
    http://support.apple.com/kb/TS5419
    Cheers,
    Jason H.

  • Sharing internet connection using 4200 speedstream with airport express

    I have xp windows sp2 loaded on a desktop with ethernet connection to a modem and have a macbook pro laptop using airport express. I have to reset the modem to full bridge mode to access the internet when using airport express wireless connection,this disables the connection to the internet on my desktop ( the error displayed is low conductivity through the modem). To get my desk top to work on the internet I have to reset the modem and set it to optus bridge. This allows access to the internet but disables my airport express connecton.
    Is there a way to allow sharing my connection to the internet without reseting the modem.

    G'day mate,
    The SpeedStream 4200 supplied to Telstra BigPond customers is a single user device, connect it to a 'Switch' or 'Router' to share the Internet Service or, replace the whole thing with an ADSL2+ Wireless Modem Router and get coverage all over your house.

Maybe you are looking for