Interrupt DML replication while DDL continues? Resume DML after some time.
Is there a possibility to interrupt DML replication for a specific period (let's say half an hour) while DDL statements are still replicated. After that period I want to resume the DML replication at the SCN it was interrupted.
I don't know if there's a way to do what you're trying to do....
But, in my opinion, that does not make sense.
Streams treats the redo log by SCN. It also keep track of a multi-version data dictionnary of the objects (because they can change over time). Moreover, DML and DDL are not independent. For exemple, if you increase the length of a column and delay that DDL on the target db, DML may crash because the column is not large enough...
You could try having 2 different capture, propagation and apply (one for DML and another for DDL) but i'm not optitimistic on that scenario...
Regards,
Similar Messages
-
i have installed sim card but while settinng up ios 5.1 when i chose connect to itunes after some time it shows no sim card installed
qaziahmad2010 wrote:
i have iphone 3gs i restored it and now it is not activating ...
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
Portege 3440CT freezes after some time while the files are being copied
Hello all :)
It seems I'm having the same problem as missred in this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232 (on the bottom). Unfortunatelly I can't reply there that's why I'm writing here. My laptop version is 3440CT.
My try was to make a win98 bootable HD drive with i386 directory on it, boot from this disk and start the installation with winnt.exe. OK, it works but while the files are being copied after some time it just freezes. I tried it both with one partition and i386 on active system partition and with two partitions and i386 on a separate non-system partition. I don't have FDD or CD for the laptop.
Any ideas what is wrong? Is it possible to install XP on the same disk the XP installation is started from?
Can't wait for your replies ;)
dzi
PS: My other tries were:
- complete XP installation on another computer and then switching the drive
- XP installation on another computer up to the point it first resets (after finishing of coping the installation files) and then switching the drive
both unsuccessful. I also changed the drive to another one as I suspected it's phisically damaged. Now I'm out of ideas ;)+My try was to make a win98 bootable HD drive with i386 directory on it, boot from this disk and start the installation with winnt.exe. OK, it works but while the files are being copied after some time it just freezes.+
It should work out this way, so........ is it really freezing or did you forget to include "smartdrive" ?
Be sure to include the file in the root-directory of your HD and put the right command in your autoexec.bat file
In the link you refer to you can find all the details
and ...... yes, you can install XP on the same HD the installation is starting from
you can also look into this thread for more info :
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=87872 -
Replication DS6.2 - DS5.2 stops working after some time
Hello!
After weeks of unsuccessfully trying to solve a replication problem, I hope that someone of this forum can give me a hint.
I have 2 masters DS5.2 and two masters DS6.2.
Replication is working fine for some days. E.g. last time the replication was working until 29.11.
But at some point the replication stops working and I get the following errors in the errors log:
[28/Nov/2007:10:51:16 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d3d84000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:12:48:09 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d58e9000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:19:06:55 +0100] - INFO: 29398 entries in the directory database.
[28/Nov/2007:19:06:55 +0100] - INFO: add:107, modify:0, modrdn:0, search:3651, delete:0, compare:0, bind:2763 since startup.
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:34:05 +0100] - WARNING<20805> - Backend Database - conn=328186 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:45:46 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
Since the replication was not working I had to initialize the DS6 masters again:
[29/Nov/2007:16:03:59 +0100] - import hvb: Index buffering enabled with bucket size 76
[29/Nov/2007:16:03:59 +0100] - import hvb: Beginning import job...
[29/Nov/2007:16:04:20 +0100] - import hvb: Processed 14166 entries -- average rate 674.3/sec, recent rate 674.2/sec, hit ratio 0%
[29/Nov/2007:16:04:41 +0100] - import hvb: Processed 22598 entries -- average rate 525.5/sec, recent rate 525.5/sec, hit ratio 100%
[29/Nov/2007:16:05:03 +0100] - import hvb: Processed 31591 entries -- average rate 493.6/sec, recent rate 405.4/sec, hit ratio 100%
[29/Nov/2007:16:05:05 +0100] - import hvb: Workers finished; cleaning up...
[29/Nov/2007:16:05:17 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replica (dc=hvb,dc=de) has been initialized by total protocol
as full replica
[29/Nov/2007:16:06:56 +0100] - WARNING<20805> - Backend Database - conn=334334 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed92e00001a360000
I tried to change a password. But the replication failed again and since than the replication is working again.
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
But I'm sure that after some days there will be a problem again.
Sometime there are also the errors:
[29/Nov/2007:16:27:05 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:05 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:06 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:06 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:06 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
I tried to reproduce the problem.
At the moment everything works fine and I can do many changes.
But I know that there is somewhere a problem and the replication will stop working again in the next days.
Can you give any advise?
Regards,
Beate
Edited by: 72716 on Nov 30, 2007 10:05 AMHere is an explanation of the failure:
1. Prioritized replication was introduced with DS6.0;
2. When a suffix at a DS6 instance is initialized from a DS5 instance, and then an operation is performed at the DS6 instance that uses prioritized replication, replication fails;
3. By default, password policy uses prioritized replication to propagate auth-failure-lockout state updates (e.g., adding a pwdFailureTime attribute value on a failed bind attempt);
A work-around:
Disable DS6 supplying auth-failure lockout state using prioritized replication. In any password policy having auth-failure-lockout enabled, set
pwdIsLockoutPrioritized:FALSE
Note that DS6 enables prioritized lockout by default, in particular, it enables this feature when migrating a password policy received from a DS5 instance. Hence, for this workaround to be effective, the prioritized lockout feature must be disabled in any DS6 password policy that has auth-failure lockout enabled, which could include:
1. The default password policy at any DS6 instance (cn=password policy,cn=config);
2. Any password policy originating at a DS5 instance, including those in data imported into a DS6 instance, received via replication total update initialization, or added at the DS5 instance subsequent to the DS6 instance initialization;
3. Any password policy added to a DS6 instance.
Additionally, do not set any prioritized replication rules for other attributes.
It is possible the bug can still be triggered in the case of a DS6-only topology that was initialized from DS5 data.
Contact Sun support for the status of a fix for the bug. The CR is 6645742. -
How can I pause the task and resume it in some times?
Hi all,
I have been using traditional DAQ for some times and I swtich to DAQmx recently. In traditional DAQ, I can start a task, pause it for a while and then resume the task. But in DAQmx, I didn't see the same function. Is that any way to do the same thingin DAQmx? Thanks.Hi PKIM,
Have you seen this thread?
http://forums.ni.com/t5/Multifunction-DAQ/How-can-I-pause-and-resume-analog-output-using-DAQmx/td-p/...
The thread details how to create a pause trigger in software. A better option may be to create a pause trigger in hardware. I'm not sure what type of data acquisition task you are doing, but the method should work regardless. Please let me know if you have any questions.
Best Regards,
Ian K.
Applications Engineer
National Instruments -
Hi,
While downloading an update for the iphone, my internet connection momentarily stops.
This interrupts the update download, which then needs to start from the beginning again.
Is there any way to enable the download to pick up from where it was interrupted?
Its a 420 mb update so it never finishes before the connection drops out.
Any help would be appreciated.
cheersyou cant resume it from the last position in itunes but could be paused and resumed,check out website,
http://www.felixbruns.de/iPod/firmware/ -
hi
when i enter into fire fox for 15 min no problem i can use after that its restarted, i update also,but the problem occur again.......
i cant solve this problem, i have added many password, i cant make re install,What issue occurs after about 15 minutes? Do websites stop loading? Does Firefox crash?
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
How to interrupt an funtion call and continue the followed code?
for example, the code:
public class A{
public static void main(String[] args){
int i = 0;
method1();
system.out.println("exit");
public void method1(){
int j = 0;
while(true){
j +=1;
there is a error in method1(), so the call the method1( ) in main() will make an error.
how can i interrupt this funtion call and continue the followed code?in actually, I can not control the method1(), that's
an remote object function.
So I can not add exception in methoes().Then in your main method catch whatever "Error" your method1 is throwing. -
When i plugged my ipod into the computer it started to make buzzing and screeching noises. It became hot so i removed it and then the screen froze while it continued to make these noises. I have never had anything like this happen. (never gotten it wet or had it exposed to extreme temperatures) It is also unresponsive to any buttons on the ipod and it didn't show up when i plugged it into my computer. What do I do? Also if it is unfixable could i get a free one from apple?
Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David -
My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 250
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.1.1 [Click for support]
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
DivX HiQ
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 60
Oldest backup: 2012-07-15 01:16:54 +0000
Last backup: 2015-03-29 19:28:06 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
97% rapportd
3% WindowServer
1% mds
0% fseventsd
0% distnoted
Top Processes by Memory: ℹ️
155 MB Safari
120 MB Finder
86 MB rapportd
86 MB WindowServer
69 MB mds_stores
Virtual Memory Information: ℹ️
12.56 GB Free RAM
2.53 GB Active RAM
428 MB Inactive RAM
1.66 GB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 31, 2015, 06:00:15 PM Self test - passed
Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hangOpen Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
How to continue the loop after getting the exception NO_DATA_FOUND
I am inserting 2000 employees attendance data into table through procedure by validating the shifts assigned some times if employee doesn't have shift it raising NO_DATA_FOUND exception, so now I am inserting the details of the employee into one table as a log.
my question is if 2000 transactions are inserting if exception raised at 1000 record as "NO_DATA_FOUND" is it remaining records will insert into the table? or it will exit from the procedure and stops remaining 1000 transactions?, please advice if any other way to continue the remaining transactions
oracle version: 11 G R2, OS: Windows 2008 R2Do your select statement in a seperate begin...end block, you can cath the excption in the block and do your logging there.
Something like this
--just an example from scott/tiger
Declare
CNT number := 7851 ;
vname varchar2(25);
ins_flag boolean ;
BEGIN
while cnt <= 7935 and cnt >=7850
LOOP
Begin
select ename into vname from emp where empno=cnt ;
ins_flag := true;
exception
when no_data_found then
-- dbms_output.put_line('no data');
ins_flag := false;
end;
if ins_flag then
--do insert here
dbms_output.put_line('do your insert here');
else
dbms_output.put_line('no insert');
end if;
cnt := cnt+1 ;
END LOOP;
end; -
How do I disable resuming downloads after restarting the browser?
I did find how to prevent resuming downloads after a crash. But how can I disable resuming downloads after a manual resart of the browser?
Hi,
You can try to set [http://kb.mozillazine.org/index.php?title=Browser.download.manager.quitBehavior&redirect=no browser.download.manager.quitBehavior] to '''1''' in [http://kb.mozillazine.org/About:config about:config].
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
[http://kb.mozillazine.org/About:config_entries about:config Entries]
The [https://services.addons.mozilla.org/en-US/firefox/discovery/addon/config-descriptions/ Config Descriptions] add-on adds helpful source comments in about:config.
[https://developer.mozilla.org/en-US/docs/Download_Manager_preferences Download Manager prefs] -
My Apple TV froze while trying to access Netflix. I unplugged the Apple TV from the wall and re plugged it. Now it stays on the loading time and date setting. After 10 minutes, I held menu, and hit restart (as the troubleshoot said). Same problem is still occurring with the continuous "checking for date and time". And if I hold menu to bypass this, I only have my settings and computer icon, all other icons have disappeared. Not quite sure what to do, any comments would surely help.
Thanks guys, appreciate it.
MattApple TV 1st generation or 2nd?
I would try plugging in the HDMI from the ATV to a different HDMI port on your TV and even trying the ATV on a different TV altogether...sounds like the HDMI port on your TV might be bad or a bad connection. Keep in mind you'll need to switch the TV input to the new HDMI port -
How to resume by pressing some key on the keyboard or mouse?
Hello, I have a usb keyboard and mouse. When I go into S3 sleep mode (suspend to ram), I can resume by pressing the power button. However I would like to resume by pressing some button on the mouse or on the keyboard. This works in windows, so from a hardware perspective this should be possible. Is it possible to 'arm' the keyboard and/or mouse such that they can bring my computer out of sleep mode?
Hi
FelixRaven,
We wonder if there is any luck your problem has been resolved.
since still no similar cases have been reported recently. As S.Sengupta suggested, you could perform a system restore for good measure.
if your issue persists, please ensure if there is third-party software or service interruption. You could refer to Clean Boot to achieve it:
http://support.microsoft.com/kb/929135
Beyond that, this issue can also be caused by the ACPI of your BIOS. If the issue still occurs in Clean Boot, I suggest you upgrade the BIOS.
Best regards, -
Dear all,
sorry for opening another thread on this.
I think I have a performance issue with workflows attached to document sets in SharePoint. And I say “I think” because people keep telling me that this is the way it just is.
The user creates a new document set, which triggers a workflow in which the user has to confirm/review/approve a series of tasks. The time it takes from clicking the OK button on those task form to the workflow status moving to the next step is about 4 seconds.
And visiting that status page within those 4 seconds brings up the infamous “Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.” message.
Hitting Refresh in the browser after those 4 seconds will make the new workflow status appear and the red text go away.
Is that normal? Is that the performance that everyone else is seeing as well?
I struggle to see why simply moving a workflow from one task to another should take that on a machine that isn’t doing anything else at the time.
(1)
I have a standalone (non-clustered) SharePoint box, 4 CPUs, 8 GB of memory, more than half of that available, acting as application server and wfe; only the database is on different box.
(2)
The CPU only goes up to 18 or 19%, so CPU does not seem to be the bottleneck. Half the RAM is also still free.
(3)
The workflow is designed with Nintex, and has about 9 flexi and review tasks – the last 2 of them in a loop iterating over typically 3 or 4 items.
(4)
Looking at the logs it looks like the processing in Nintex only takes about 1 second – I don’t know where the other 3 seconds are going.
(5)
There is nothing obvious in the logs.
(6)
We’ve looked at all the “theoretical” improvements around throttling and batch sizes etc. – none of them appeared make any difference. And the workflow is so small that it looks like my tasks gets executed straight away. The problem appears
to be that the execution takes too long(?) and therefore has not finished by the time the page get redrawn.
(7)
I am running perfmon and I can e.g. see one(!) workflow being loaded into memory – as expected as I am the only user.
(8)
I am seeing a total of 3(?) SQL queries being executed(?). I get the Bytes Sent/sec spiking at 25K, and Bytes received at 18K. But is this good or bad or a bottleneck?
Where do I take it from here?
I have been told that “[…] most customers have no issue with this as they are used to the way SP operates and it can be slow at times.” Is it really that bad?
If it is worth watching more performance counters then I’d need to know what to compare them to.
Is there something else I am missing?
Thanks
MartinHi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig | Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold 100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig | Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize 200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/
Maybe you are looking for
-
I am trying to install an app in my iphone. When I click Install, my old gmail account comes up for verification and it asks for my password etc. I dont use this account anymore and have a new gmail account that is associated with my apple account.
-
Error while running DTW in SAP Business One 9.0
Dear All, Error while running DTW the error shows that in SAP Business One 9.0 & PL 08 the 'Unable to access SBO-Common Database' & attached the screen shot for the same. Kindly guide for the same Thanks&Regards Umesh Vaidya
-
TS1717 Since the upgrade to version 11 ITunes will not launch I'm running Windows 7
Since upgrading to version 11 ITunes will not launch I have removed and reloaded again but it still will not launch.
-
Trying to burn DL DVDs and I get the error below. I can burn CDs and SL DVDs no problem. But only when I burn DL is when I get errors. Heres the error The drive reported an error: Sense Key = HARDWARE ERROR Sense Code = 0x09, 0x01 Tracking Servo Erro
-
Storage bin should display in MB52
Hi All, Storage bin should display in MB52 T-code warehouse stock dispaly, Please guide me how it possible... Regards Hari